Condition: good (used), Year of construction: 2001, Functionality: fully functional, Manufacturer Fasti GmbH Type ERD 65 B Connection value 0.9 kW Two available! Price 850 EUR per piece! Duolq Ix Eovzwrbo Eet

Year of construction: 2004, Condition: used, It was used as a cooling backup. Not under power Currently, 1 out of 4 compressors on the device is damaged. It has no effect on operation. That is, except for the reduced cold. power. It cooled approximately 12 presses in the company without any problems. Pressure gauges in the cooling circuit are also non-functional (this has no effect on functionality) In 2022, the last service Dslevdtv Uoq Ix E Ejut + revision for F gases was performed.

Condition: used, Year of construction: 2001, operating hours: 140,000 h, Functionality: fully functional, Equipment: documentation/manual, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) Djlsv R E Icoq Ix E Ejut ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 2007, Condition: good (used), Functionality: fully functional, Machine has always been serviced but now has a software error Dslq Ixjvyqkzs E Ejut

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, clamping force: 400 kN, screw diameter: 30 mm, injection pressure: 1.45 bar, injection weight: 88 g, total length: 3,510 mm, total width: 1,220 mm, total height: 1,900 mm, overall weight: 3,000 kg, heating capacity: 6.9 kW (9.38 HP), power: 21.9 kW (29.78 HP), Engel 200/40 injection molding machine Technical data: Screw diameter 30mm Injection weight 88g Injection pressure 1450bar Dosing volume 99ccm Clamping force 40t Size of the clamping plates 550x430mm CC90 control system (Norwegian language) Weight 3000kg Dimensions 3.51x1.22x1.90m Heating capacity 6.9 kW Total output 21.9kW Djlq Ix Eeryxl Ts Ejut Location: Austraße 34 57076 Siegen

Condition: excellent (used), LEISTER hot air gun for processing plastics. Duolq Ix Esv Rx N Te Eet Power 1600 W. Continuously adjustable temperature. Used, in very good condition. Accessories: several nozzles, see illustration. Professional handheld device, suitable for demanding welding work on plastics and for shrinking, drying and shaping plastics.

Year of construction: 2021, Condition: good (used), SN: 220840029, best. from: Magnesium injection molding machine, make JSW, type JLM850-MGIIe, year of manufacture 2021, SN 220840029, specification: dead weight 50,000 kg, screw diameter 100 mm, injection pressure 67-86 MPa, injection capacity (theoretical) 1,728 cm³, shot weight (theoretical) 1,417 g, injection rate (theoretical) 35,343 cm³/sec, screw speed 0-160 rpm, nozzle diameter 17 mm x R40 mm, nozzle lift-off travel 75 mm, nozzle contact force 233 kN, position of the injection unit (2 stages) 0-200 mm, closing technology 5.Double toggle lever (folds inwards), mold closing force 8,330 kN, mold opening force 833 kN, platen spacing max. 2,3000 mm, mold opening stroke 1,200 mm, mold height 500-1,000 mm, distance between tie bars (HxV) 1,060 x 100 mm, clamping platen size (HxV) 1,590 x 1,590 mm, centering ring Ø 190 mm, mold fastening method T-slot type, opening and closing speed. of the casting mold: closing casting mold 61 m/min, opening casting mold 59 m/min, ejector force x ejector stroke 350 kN x 150 mm, casting mold height (HxV) min. 640 x 640 mm, pump power motor output 75 kW, servo motor output 22 kW, heating power 63 kW, total power 160 kW, machine size 11,300 x 2,900 x 3,800 mm, hydraulic tank capacity 800 l, cooling water consumption 8 m³/h, magnesium feed tank, make DMS, type MAC-2300, year of manufacture 0, SN, specification: mobile, approx. 1,600 x 1,500 x 1,900 mm, dead weight 500 kg, without type plate, feed fan, make Matsuni, type JL4-6VC-J, year of manufacture. 2021, power 2.2 kW, linear sprayer, make AED Automation, type AED 1000 LST2-Tele, year of manufacture 2022, SN LST2-0010, specification: , 6-axis industrial robot, make Kuka, type KR50 R2500 F/SEL, year of manufacture 2021, SN 1421941, specification: dead weight 587 kg, load capacity 50 kg, reach 2,501 mm, with control cabinet, cooling shelves, with 2 output chutes, protective fence, with safety device, control, , deburring press, make Reis, type SEP13-07-65 Dialog IV, year of manufacture 2022, SN , specification: dead weight 10,000 kg, nominal force 650 kN, , hinge conveyor, make Knoll, type 500P-40-L, year 2021, SN 1517512/2021 Deljv Aanhoq Ix E Ejut

Condition: excellent (used), Year of construction: 2012, Clamping Unit • Clamping Force: 50 Ton • Opening Force (max): 40 kN/mm • Mould Height (fixed/variable min): 200 mm • Platen Daylight (fixed/variable max): 450-550 mm • Weight of Movable Mould Half (max): 230 kg • Ejector Force/Stroke (max): 30 kN / 70 mm Injection Unit (100) Dujlq Isvtn Nbjx E Ejt • Screw Diameter: 20 mm • Effective Screw Length (L/D): 25 • Injection Volume: 31 cm³ • Shot Weight: 29 g (PS) Machine Specifications • Weight of Machine: 3,049 kg • Transport Dimensions: 2.7 m x 1.5 m x 2.2 m • Transport Weight: 3.6 tons Safety • Barrier: Optical barrier only (no mechanical barrier). 2x hydraulic core puller

Condition: used, Year of construction: 2018, operating hours: 4,372 h, Functionality: fully functional, film width: 830 mm, type of input current: three-phase, pressure: 6 bar, total width: 2,369 mm, total length: 14,897 mm, total height: 3,569 mm, input voltage: 230 V, power of vacuum pump: 27 W, heating capacity: 27 kW (36.71 HP), compressed air connection: 6 bar, operating pressure: 6 bar, For sale is a Kiefel KMD 64 Premium thermoforming machine/automatic pneumatic press. The machine is fully functional and has only been in operation for a few hours. Maintenance has also been performed regularly. Machine configuration: heating, forming, punching, punching, and stacking. Integrated handling system for stacking; see the attached document for stacking options. Main technical data/basic machine data: see the attached table. Technology/Process The KMD 64 Premium is the "largest" of the small-format pneumatic presses and is therefore more powerful. All common plastics can be economically processed into molded parts. These include (R)PET, PP, PS, CPET, OPS, PLA, PE, etc. Advantages 1. Fast compressed air supply and venting Duslqov R Uyuo Ix E Est - 1-inch diameter valves to ensure high flow - Higher production output due to shorter molding times - Better product quality due to faster molding 2. Feed system - Pulling needle chain - Highest hygiene standards in KIEFEL systems - Precise motors for chain rail spreading 3. Larger table stroke - A table stroke of 140 mm is used for maximum product heights of up to 120 mm. 4. Stronger table drives for stable molds - High tool weights can be used in all stations - Robust and flexible mold designs are possible 5. Touch screen panel and Simotion (Siemens) control system - Easy machine operation We are happy to provide you with further information.

Condition: ready for operation (used), Year of construction: 2006, Main Drive Main motor power 55KW Stroke 600mm Injection Unit Screw diameter 65 mm Shot weight 1132g Injection pressure 2315 bar Clamping Unit Clamping force 270 ton Opening stroke 600 mm Distance between bars 620 x 620 mm Ejector stroke 200 mm Additional Equipment Duolqoupm R Sj Ix E Ejt Core Valves: 2 Air Valves: 4 EU 12 for Robot Connection: Yes Main Drive Main motor power 55KW Stroke 600mm Injection Unit Screw diameter 65 mm Shot weight 1132g Injection pressure 2315 bar Clamping Unit Clamping force 270 ton Opening stroke 600 mm Distance between bars 620 x 620 mm Ejector stroke 200 mm Additional Equipment Core Valves: 2 Air Valves: 4 EU 12 for Robot Connection: Yes This Battenfeld TM 270 / 2800 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 620 x 620 mm and an opening stroke of 600 mm. Equipped with 2 core valves, 4 air valves, and an EU 12 interface for robot connection. A solid choice for enhancing production capabilities. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 1989, operating hours: 74,900 h, clamping force: 850 kN, screw diameter: 40 mm, overall weight: 3,700 kg, Machine no. 145464 Year of construction 1989 Machine weight 3700 kg (without oil filling) Clamping force 850kN Heating 8,31KW Motor 18,5KW Total power 27,2KW Dolq Ixsr Hrqre E Eout Machine cycles 7,112,306 Operating hours 74,900h Interfaces: Master computer, handling, blow-out, selector switch, core pull 1 hydraulic, mold temperature control 3 pcs. The following accessories etc. are included with the machine: Complete 50 injection unit thermoplastic , Selecting diverter , Hydraulic infeed conveyor (height adjustable 3 levels) (integrated in control) , Diskette drive external (Arburg original) , Documentation and work reports from the machine by Arburg Service , Machine setting course CMD documents (folder) , E-plan , Documents also in digital form , Oil filling (must be pumped into a container before transport (pump is available)) , Electronic water battery

Condition: excellent (used), Functionality: fully functional, 2 - Urban AKS 1200 head welding machine - Welding length max. 3500 mm - Weld bead limit: 2 mm - Burn-off: 6 mm Duoljv Rmm Tjq Ix E Est - Set of support arms

Year of construction: 2001, Condition: excellent (used), Single-head welding machine for PVC windows Pressta Eisele Apollo Dujlsp At U Esq Ix E Eot • power consumption 1.5kW /220V • max. profile width when welded at an angle of 90°-160 mm • max. profile height 160 mm • angular welding range from approx. 35° to 180° • pneumatic profile mounting • heating mirror lowered from above • mirror width 300 mm • dimensions (LxBxH) 700x660x1700 mm • weight 190 kg • "CE" safety mark

Condition: excellent (used), Year of construction: 2003, Engel VC750/150 , tiebarless machine Controll panel: CC100 Clamping force: 150 t Plate dimensions: 750x520 mm Opening Stroke: 605mm Screw dia: 50 mm Max. swept wolume 393 cm3 Injection rate: 283 cm3/s Injection pressure: 1439 bar Dslq Ievi Rzrjx E Eeut Nozzle stroke 350 mm Working hours only: 38987 Weight 9100 kg L 5200 x W 1700 x H 2000 mm 2x core pull Condition: fully funtional Videos on request.

Condition: like new (used), Year of construction: 2019, operating hours: 136 h, Functionality: fully functional, machine/vehicle number: 61032312, clamping force: 5,000 kN, screw diameter: 90 mm, clearance between the columns: 1,040 mm, injection pressure: 1,839 bar, injection weight: 2,048 g, mold height (min.): 450 mm, ejector force: 95 N, ejector stroke: 250 mm, opening stroke: 1,170 mm, plate length: 1,040 mm, plate width: 910 mm, overall weight: 28,800 kg, heating capacity: 44 kW (59.82 HP), Injection machine for sale by a mouldmaker, the machine was used mainly for mould trials and evantually for small series. It didn't work in shifts or series production. As good as new with really few hours. Dolq Ix Ejv Ulf As Eout

Condition: used, Year: 2014 Type of inspection: NC5 Number of hours: 39,660 Storage location: MECA PLASTIC Deadline: AVAILABLE Duslqjv I Uz Hs Ix E Est Closing force: 420 tons Opening stroke: 770 mm Between columns: 820 x 820 mm Plate dimensions: 1200 x 1200 mm Minimum/maximum mold: 350/1020 mm Maximum gap between plates: 1790 mm Screw diameter: 60 mm Screw length: 25T cm3: 763 Bars: 2106 Motor power: 135 kW Heating power: 27.9 kW Closing weight: Injection weight: 24 tonnes Length dimensions: 8 m Width dimensions: 2.2 m Height dimensions : 2.70 m Robot interface: YES Bi-metal: YES Other: 2 BLOW GUNS, 3 batteries on injection, 16 hot runners, pneumatic shutter nozzle, 3 programmable inputs, mixer/mixer tip screw

Condition: like new (used), Year of construction: 2017, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Deleu Epy Noq Ix E Ejut Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Working hours: 12.500 h

Condition: used, Year of construction: 2012, operating hours: 3,133 h, Functionality: fully functional, machine/vehicle number: 61017009, clamping force: 3,500 kN, screw diameter: 80 mm, clearance between the columns: 710 mm, injection pressure: 1,855 bar, injection weight: 1,464 g, mold height (min.): 380 mm, ejector force: 95 N, ejector stroke: 250 mm, opening stroke: 920 mm, plate length: 1,060 mm, plate width: 1,060 mm, overall weight: 17,800 kg, heating capacity: 36 kW (48.95 HP), Injection machine for sale by a mouldmaker, the machine was used mainly for mould trials and evantually for small series. It didn't work in shifts or series production. As good as new. Duelqov Ulc Ij Ix E Est

Condition: used, Year of construction: 2012, operating hours: 36,000 h, Year: 2012 Type of inspection: MC5 Number of hours: 36,000 Delov I Uyvoq Ix E Esut Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 110 tons Opening stroke: 600 mm Between columns: 470 mm x 470 mm Plate dimensions: 745 mm x 770 mm Minimum/maximum mold: mm Maximum spacing between plates: 900 mm Screw diameter: 70 mm Screw length: 20T cm3: 393 Bars: 1898 Motor power: 22 kW Heating power: 15.62 kW Closing weight: 6.2 tons Length dimensions: 4.90 m Width dimensions: 1.60 m Height dimensions: 2.10 m Cores: 2 HYDRAULIC CORES Robot interface: YES Bi-metal: YES

Condition: excellent (used), Year of construction: 2006, Clamping force: 500 t Screw diameter: 80 mm Platten dimensions: 1300 x 1200 mm Dolqeva H Ams Ix E Eeut Distance between tie bars V: 900 mm Distance between tie bars H: 900 mm Shot volume: 1779 cm3 Shot weight: 1620 g Injection pressure: 1855 bar Working hours: 46.511 Type: Horizontal Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,496 h, Functionality: fully functional, machine/vehicle number: 61021425, clamping force: 1,600 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, injection pressure: 1,880 bar, injection weight: 183 g, mold height (min.): 300 mm, ejector force: 2,300 N, ejector stroke: 150 mm, overall weight: 7,800 kg, heating capacity: 10.9 kW (14.82 HP), pressure: 0.5 bar, Injection machine for sale by a mouldmaker, the machine was used mainly for mould trials and evantually for small series. It didn't work in shifts or series production. As good as new. Deljv Uk Tfeq Ix E Eeut

Condition: used, Year of construction: 2011, operating hours: 39,000 h, Year: 2011 Control type: CC200 Number of hours: 39,000 Storage location: MECA PLASTIC Delivery time: AVAILABLE Closing force: 160 mm Opening stroke: 600 mm Between columns: 850 x 750 mm Plate dimensions: 850 x 750 mm Minimum/maximum mold: 300 mm Maximum gap between plates: 900 mm Screw diameter: 30/35 mm Screw length: 20T cm3: 113/192 Bars: 2400/2390 Motor power: 30 kW Heating power: 16 kW Closing weight: 9.5 tons Dolq Ix Eev I Uxro Ejut Injection weight: Length dimensions: 5.8 m Width dimensions: 1.7M Height dimensions: 1.4M Cores: 5 Robot interface: Yes Bi-metal: Yes Other: 8 sequential, 12/1 24-zone hot runners, Viper robot, conveyor belt

Condition: like new (used), Year of construction: 2017, Clamping unit: 50 ton Oppening stroke (max. kN/mm) : 30 / 250 Mould height (fixed/variable) min.-max. mm: ---/172/272 Platen daylight (fixed/variable) max. mm: ---/422-522 Shuttle table stroke: 650 mm Screw diameter: 20 mm Dslju Ep Imjq Ix E Eeut Injection volume: 31 cm3 Shot weight: 29 g Injection pressure: 2.500 bar Working hours: 19.719 Equipment: 3x hot runner 1x hydraulic core puller 1x pneumatic core puller

Condition: excellent (used), Year of construction: 2010, Engel Victory 80/50 Spex Clamping force: 50 ton Duelq Isuy Rmysx E Eot Opening stroke: 400 mm Mould height Min-max: 200 mm Total daylight max. 600 mm Platen size: 500x450mm Mould weight max: 450kg Screw: 18mm screw Injection capacity: 25 cm3 Serial: 176053 + robot picker Engel USP (universal picker)

Condition: good (used), Year of construction: 2001, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 30 mm Duelq Ijuwr Dhsx E Ejt Screw stroke: 100 mm Injection volume: 70 cm3 Shot weight: 59 g Injection pressure: 1040 bar Working hours: 40.882