Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, rotational speed (max.): 12,000 rpm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, Fully functional condition + regular maintenance by machine manufacturer TECHNICAL DETAILS Control: Heidenhain iTNC530 with handwheel X-axis: approx. 3,000 mm Y-axis: approx. 6,000 mm Z-axis: approx. 1,250 mm 4th axis: swivel axis Spindle Spindle type: milling spindle for styrofoam (can be converted to high-frequency spindle) Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: Manual with union nut Drives & feed Feed speed (X, Y, Z axis): up to 20 m/min Axis acceleration (X, Y, Z axis): up to 1.5 m/s² Dkshxywkev Dhlqe Ajl MACHINE DETAILS Connected load: approx. 28 kW Pre-fuse: 63 A Machine space requirement: approx. 5,000 x 10,000 x 4,500 mm Total weight: 10,000 kg With little effort, it can be converted to an HF spindle with 24,000 rpm and HSK63 holder. This enables the machining of a wide variety of materials, including aluminum. The integration of a tool changer is also easy to implement.

Year of construction: 1997, operating hours: 31,850 h, Condition: good (used), Conical twin screw extruder - Manufacturer: CINCINNATI - Type: Titan 45 - Conical screws Ø45mm - Year: 1997 - 31850 operating hours - Engine power: 15kW - Flow rate: 120kg/h Dkjhxywev D Nzmek Ajl - Replacement motor - Replacement vacuum pump - Replacement material feed screw

Condition: used, Year of construction: 1992, machine/vehicle number: 293784, Drill spindles: 8 Drill spindle rotation direction: 4 right and 4 left Drill spindle speeds: 2800 rpm Shaft mount: 10 and 11 mm Drill stroke: 100 mm Drive motor: 380 V, 1.1 kW Table height above floor: 840 mm Djhjbnnybjxywk Ajkl Space required: approx. 650 x 400 x 1700 mm Weight: 120 kg

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, Functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Dkehxywkjv D Nxlo Ael Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: good (used), Year of construction: 1991, Device number: 207941 Filling capacity: 100 l Heating: 4.5 kW Dohxywsrun Acjk Askl Blower: 0.85 kW Condition: good Accessories: Weight: 120 kg Dimensions: 600 x 700 x 1,200 mm

Condition: used, Year of construction: 2001, Functionality: fully functional, Year: 2001 - technically efficient, ready to work (directly from the client) - corner cleaning machine SV 494 CNC Dkohxywkstr Dukj Asl - for-head welding machine AKS 6110 - turning station - cooling station - flash limitation: 0.2 - 2 mm

Condition: good (used), Year of construction: 1990, Battenfeld-Fischer VK 1-1 Blower Dehxywevrfhrek Askl Number of heads: 2 Center distance: 100 mm Maximum container volume: 0.5 l Number of stations: 1 Continuous Extrusion Number of extruders: 1 Screw diameter: 60 mm L/D ratio: 20 Parison thickness control: PROFILOG 32 points Center distance: 100 mm Hot knife Automatic coring Voltage: 380 V Triphase Frequency: 50 Hz Blower: Dimensions (L x W x H): 4.60 m x 1.50 m x 2.60 m Weight: 5000 kg Cabinet: Dimensions (L x W x H): 0.85 m x 1.10 m x 2.40 m Weight: 400 kg

Condition: good (used), Year of construction: 1998, operating hours: 105,191 h, Functionality: fully functional, machine/vehicle number: F41, clamping force: 250 kN, screw diameter: 18 mm, clearance between the columns: 220 mm, displacement volume: 20 cm³, mold height (min.): 150 mm, opening stroke: 275 mm, plate width: 220 mm, plate height: 220 mm, overall weight: 1,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 58 A, Machine is in use. Can be viewed in operation. Peripherals are not included with the machine. Djhsvrg Ugoxywk Ajkl

Condition: like new (used), Year of construction: 2024, Equipment: type plate available, Volumetric dosing systems - granules, powders and ground material We offer a range of fully functional volumetric dosing systems that are ideal for conveying granules, powders and ground material. Djhxsvmylzoywk Aokl • Various models available: We have different dosing systems in stock that can be adapted depending on the material and application. • Testing option: On request, we will test the dosing devices with your material to ensure that they meet your requirements. • Reliable function: All systems are tested and ready for immediate use. Contact us and we will help you find the right doser for your requirements. We are happy to answer any questions or provide advice!

Condition: excellent (used), Year of construction: 2011, Wittmann Battenfeld EcoPower 110/130 injection molding machine Electric machine, energy efficient Control :UNILOG B6 Year of production : 2011 Closing force 110 tons Auger diameter 25 mm Injection weight max. 55.8 gPS Column spacing 470x470 mm Min. tool height 200 mm Max. tool height 450 mm Hydraulic working pressure 210 bar Machine weight 4600 kg L. 420 x width 140 x height 270 cm, Dehxywksrn I Nrj Askl Battenfeld has about 60000 hours (in the machine the computer was changed and the hours were not recorded there, now it has less hours 4944)

Condition: good (used), Vibration welding machine for plastic Stock number: 2974 Manufacturer: Branson Type: VIP 2830 Device number: 4.E035.00.A10 Table: 1,000 x 420 mm Stamp: 800 x 420 mm Dehxjv D Nfreywk Askl Distance table - stamp: 600 mm Weight: approx. 2 t Dimensions: 2,400 x 1,700 x 2,400 mm Equipment: Condition: ready for use Sold without tools!

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, Year: 2015 - technically efficient, ready to work – after full service Dehxywksvai Nvo Aokl - vertical work - flash limitation: 0.2 – 2 mm - Windows 10 operating system - maximum welding dimensions: 2700 x 2500 mm - automatic regulation and monitoring of the welding process - protective gates

Year of construction: 2011, Condition: excellent (used), INJECTION MACHINE - PROCREA BLOWING TYPE Rev 300 Dshxywopy Eq Hok Aekl This PROCREA REV 300 injection blow molding machine can produce completely finished hollow body containers, without waste as injection molded with different plastic materials, with fully automatic cycles, capacity of 50 cc. at 15 liters and weight of 20 gr. at 700 gr. This machine is predisposed to work with molds of 1 to 8 cavities and the production is very high thanks to the revolver system which carries out all the operations of injection, blowing and ejection of the finished part in a single stage. The construction of molds for the Rev 300 is very simple thanks to the automatic extraction system applied to the revolver.

Condition: excellent (used), Year of construction: 2003, Bottle blowing machine "PET" Manufacturer: KRONES Model: CONTIFORM K781 Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Year of production: 2003 Technical documentation Very good condition Dohxyjvddkvswk Aokl

Condition: good (used), Year of construction: 2018, The KF228 is ideally suited for the routing of locking systems, lock cases and other routings in aluminum and plastic profiles. The KF228 is mainly used for house doors. 2 x 1.1kw routing spindles Speed 2800rpm Dshxyeuwrhtewk Askl Milling depth 110mm Milling spindle speed 120000 rpm Serial nr - 801099 Year - 2018

Condition: like new (used), Year of construction: 2000, Injection molding machine Arburg 520C 2000-675 Year of manufacture: 2000 Closing unit Dkshoq Tbdkjxywk Aol Closing force [kN] 2000 Clamping plate dimensions (hxv) [mm] 685 x 685 Clearance between columns (hxv) [mm] 520 x 520 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 353 Injection weight [g] 297 Injection pressure [bar] 2080 Electric-hydraulic equipment Pump motor power [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 5.35x1.93x2.20

Condition: excellent (used), Year of construction: 2013, Cutting line: ERLENBACH mod.ESA 5 (used for less than a month). Year of manufacture: 2013 Packing machine, model PPZA-1300/6 (used for less than a month). Year of manufacture: 2011 Dkjhxywev Hm A Tsk Ajl - For blocks max. L x B x H: 5100 x 1260 x 1260 mm - Horizontal cut: max. 61 oscillating wires - Vertical cut: max. 11 wires - Cutting speed: 1,5 m/min. - Automatic wire setting - Waste grinding (bottom, top, side)

Condition: good (used), Year of construction: 2018, operating hours: 9,585 h, Functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1.904 bar, ejector force: 33,000 N, ejector stroke: 150 mm, plate length: 660 mm, plate width: 710 mm, installation height: 200 mm, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, type of input current: three-phase, clear span: 1,050 mm, injection moulding machine KRAUSS MAFFEI KM 160-1000 PX warehouse no.: 503156 manufacturer: KRAUSS MAFFEI type: KM 160-1000 PX controller: MC6 year of construction: 2018 operation hours: 9585 h technical data clamping unit clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm ejector stroke: 150 mm ejector force: 33 kN centering diameter of moving platen: 120 mm centering diameter of fixed platen: 160 mm technical data injection unit screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar screw length: 20 l/d screw speed: 243 min screw torque: 827 N plasticising rate: 43 g/s PS injection rate into the open: 297 g/s PS number of heating zones: 6 measures & weight measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG equipment included screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x machine incl. water flow regulator Djhju Eccdoxywk Aekl machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x

Condition: good (used), Year of construction: 2000, operating hours: 38,900 h, Functionality: fully functional, clamping force: 9 kN, screw diameter: 115 mm, displacement volume: 5,349 cm³, injection pressure: 1,600 bar, injection weight: 5,062 g, STORK 900 T injection molding machine Clamping force: 900 T Reference : SXN 9000-8600 Year : 2000 Screw diameter : 115 mm Max. material pressure: 1600 bar Injection volume : 5349 cm3 Injection capacity : 5062 g Injection speed: 599 mm/s Plasticizing: 123 g/s Distance between columns (H x V): 1010 x 1010 Column diameter: 190 mm Djhxyeq Iyazswk Ajkl Number of hours: 38,900 h

Year of construction: 2006, Condition: excellent (used), Battenfeld HM 100/525 injection molding machine Year: 2006 Controls: Unilog B4 Technical details Short-circuit force: 1000 kN Size of mold plates (hxv): 680mm x 594mm Distance between columns : 470mm x 420mm Mold opening stroke: 500mm Mold height min: 250mm Maximum clearance : 750 mm Hydraulic ejector - stroke: 150 mm Forward/reverse ejector force: 41.2 kN Injection unit Screw diameter: 40 mm Ls/D ratio: 22 Injection pressure: 2100 bar Djhxok Rnvmjywk Aokl Injection volume: 251 cm³ Injection weight , PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1/min Max plasticization rate: 30.4 g/sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating power: 12.1 kW Adjustable barrel heating zones: 1+3 Pump power 18.5 kW Oil capacity 275 liters Dimensions and weights Total weight of the machine: 4,600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m

Condition: good (used), Year of construction: 2007, operating hours: 30,056 h, Functionality: fully functional, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 201 cm³, injection pressure: 1.86 bar, ejector force: 22,000 N, ejector stroke: 150 mm, plate length: 770 mm, plate width: 745 mm, installation height: 300 mm, total length: 4,700 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 7,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, injection moulding machine KRAUSS MAFFEI KM 100-380 CX warehouse no.: 503471 manufacturer: KRAUSS MAFFEI type: KM 100-380 CX Dkjhxywsuhplzjk Ajl controller: MC5 year of construction: 2007 operation hours: 30056 h technical data clamping unit clamping force: 1000 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 745 x 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 160 mm technical data injection unit screw diameter: 40 mm swept volume: 201 ccm injection pressure: 1860 bar screw length: 23 l/d screw speed: 490 min plasticising rate: 29 g/s PS injection rate into the open: 151 g/s PS number of heating zones: 5 measures & weight measures of machine l x w x h: 4.7m x 1.7m x 2.25m total weight: 7800KG equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 2x machine with material hopper machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A

Condition: good (used), Year of construction: 2001, operating hours: 51,500 h, Functionality: fully functional, clamping force: 14 kN, screw diameter: 133 mm, displacement volume: 8,336 cm³, injection pressure: 1,600 bar, injection weight: 7,919 g, STORK 1400 T injection molding machine Clamping force: 1400 T Reference : SXN 14000-12500 Year : 2001 Screw diameter : 133 mm Max. material pressure: 1600 bar Injection volume : 8336 cm3 Injection capacity : 7919 g Dehxyweq Iyb Hok Ajkl Injection speed : 771 mm/s Plasticizing: 143 g/s Distance between columns (H x V): 1300 x 1300 Column diameter: 220 mm Number of hours: 51,500 h

Year of construction: 2004, Condition: excellent (used), Injection molding machine Arburg 470C 1500-350 Year of manufacture: 2004 Control - Selogica Geiger robot TECHNICAL DATA Screw diameter [mm]: 35 Injection weight [g]: 127 Injection pressure [bar]: 2500 Closing force [kN]: 1500 Distance between columns [mm]: 470x470 Plate size [mm]: 650x650 Dshsmfr A Hjxywk Aokl Mold height min. [mm]: 250 Power [kW]: 41,9 Dimensions [m]: 4600 x 1700 Weight [kg]: 4560 Equipment Pneumatically operated doors GK control Hydraulic cores on proportional Euromap Actionica remote control

Condition: good (used), Year of construction: 2008, operating hours: 60,700 h, Functionality: fully functional, clamping force: 8,000 kN, clearance between the columns: 1,100 mm, BILLION bi-material injection press 800 T Locking force: 800 T Reference: H780/4200 Year: 2008 - H780 injection unit: 45 mm screw - Injectable volume of 341 cm3 - Injection pressure of 2276 bars - sfcw shnH4200 injection unit: 80 mm screw - Injectable volume of 2261 cm3 - Injection pressure of 1863 bars Passage between columns (H x V): 1100 x 1100 mm Plate dimensions (H x V): 2400 x 1570 mm Max. mold thickness: 1300 mm Minimum mold thickness: 350 mm Dkohxywkevrfdao Aol Max. opening stroke: 1100 mm Hydraulic cores: 6 Rotating base G4 270mm digital Machine dimensions: 10200 x 2730 x 3533 mm

Condition: excellent (used), Year of construction: 2005, Arburg ALLROUNDER 720 S 3200-2100 injection molding machine Year of manufacture: 2005 Closing unit Closing force: 3600 kN (increased at the factory) Clamping force: 130 kN Opening force: 100 / 800 kN Max. opening stroke: 700 mm Minimum mold height: 300 mm Dkshxywev Etacsk Asl Max. distance between clamping plates: 1000-1400 mm Clearance between columns: 720 x 720 mm Dimensions of mold clamping plates: 1040 x 1040 mm Max. weight of the moving mold half: 3300 kg Ejector force: 100 kN Ejector stroke: 250 mm Hydraulics, drive, other Hydraulic pump drive power: 55 kW Total installed power: 88.9 kW Control cabinet Safety standard: DIN EN 60204 Socket set: 1 x 16 A Injection unit Screw diameter: 70 mm Screw working length (L/D): 20 Cylinder capacity: max. 280 cm³ Injection volume: max. 1078 cm³ Injection weight (PS): max. 984 g Injection pressure: max. 2000 bar Screw speed: max. 51 rpm Screw torque: max. 2247 Nm Nozzle pressure force: max. 90 kN Nozzle stroke: max. 600 mm Installed power of cylinder heaters: 6 x 4500 + 3300 W Installed power of nozzle heaters: 1000 W Machine dimensions and weight Net weight: 17000 kg Electric power supply: Motor + heaters: 125 A Heaters: 50 A Additional options Servo control technology with 2 control pumps Interface for robot system (according to EUROMAP 67, 50-pin) Electric axis control Interface for mold temperature control Interface for V24 printer Interface for PC keyboard ARBURG AES energy saving system Software package "Additional monitoring functions" Software package "Additional machine movements" Software package "Production control" Machine optimization / user support package Software package "Quality assurance" Documentation package