Used run presses for sale (23)

Condition: used, Veneer press continuous press gluing press plate press Bürkle HSO 240/D 340/140 Press dimensions: 3400x1400mm Podpfxewng Tye Abmjpl Max discharge pressure 240T Max pressing pressure 6 kg/cm² Cylinders 8 pcs. with diameter 110mm Stroke 150mm Solid plates 40mm Water heated with boiler up to 60 degrees. Plates can be heated up to 150 degrees with the right boiler. Press dimensions: 2500x3900xH2800mm, 8500kg Input conveyor dimensions: 2200x3600mm, 500kg Documentation still available, first owner! Sold as one unit including conveyor belts - Details: - └ Description: The Omma glue roller is not available - Documentation available: No - CE certificate present: No - Max. workpiece length [mm]: 3400 - Max. workpiece width [mm]: 1400 - Material of press plates: Steel - Number of cylinders [pcs]: 8 - Total working pressure [ton]: 240 - Working pressure [kg/cm²]: 6 - Heating type: Water heated - Max. working temperature [°C]: 150 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1977, Veneer Press Throughfeed Press Glue Press Panel Press Bürkle HSO 240/D 280/210 Press dimensions: 2800 x 2100 mm Maximum conveying pressure: 240 T Maximum pressing pressure: 6 kg/cm² Cylinders: 6 units, diameter 110 mm + 4 smaller cylinders Stroke: 150 mm Solid plates: 40 mm Ppedpfsx N A A Hjx Abmol Heated by hot water Machine dimensions: 2900 x 3900 x H2800 mm, 8500 kg Infeed conveyors Single owner Offered as a complete unit including conveyor belts - Max. workpiece length [mm]: 2800 - Max. workpiece width [mm]: 2100 - Press plate material: Steel - Number of cylinders [pcs]: 6 + 4 - Total working pressure [tons]: 240 - Working pressure [kg/cm²]: 6 - Heating type: Water-heated - Max. working temperature [°C]: 150 Location: ex works customer site - immediately available - System must be dismantled by the seller

Condition: good (used), Year of construction: 2000, machine/vehicle number: 2000 53, total length: 3,300 mm, working width: 1,320 mm, plate length: 2,750 mm, working height: 80 mm, Equipment: hot water, Sergiani 10-level press Continuously maintained and operated Cycle time: 25 seconds, resulting in an extremely short open time with a long pressing period – ideal for PVAC Suitable for doors and panels Podpfxjx Ezkzo Abmepl The multilayer press type LAS from Sergiani features a vertically movable pressing block with either seven or ten levels. The system only ever opens one level, while all others remain under full pressing pressure, ensuring a continuous and efficient workflow. The hydraulically-operated press requires very little space, making it suitable for tight production environments. It has a maximum specific pressing pressure of 50 N/cm². With available spare parts and international maintenance service, reliable upkeep is guaranteed.

Condition: good (used), Code: 0279 Brand: ALBERTI V. Model: PCC 33/18 Pjdpfex I Nz Hsx Abmspl Continuous cycle hot press for veneering, furniture, doors, panels, composite materials and various Max working length 3300 mm Max working width 1800 mm Opening 200 mm N° 6 pistons diameter 100 mm Solid platens Diathermic oil heating Loading conveyor

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5500x4000x2250 mm Ppodpfsv A Hlmjx Abmsl Weight 8000 kg Total power requirement 45 kw

Condition: used, Year of construction: 2018, total width: 2,070 mm, total length: 3,000 mm, total height: 1,670 mm, Empty weight: 4.000 kg Price: On request - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: P0220118 - Max. workpiece length [mm]: 2500 - Max. workpiece width [mm]: 1300 Ppedpfewniqzsx Abmel - Max. workpiece height [mm]: 200 - Number of cylinders [pcs]: 6 - Total working pressure [ton]: 90 - Working pressure [kg/cm²]: 3 - Transport dimensions: 3000mm x 2070mm x 1670mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Price: On request Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees input/outpu t6 cylinders Solid plates 40mm Glue roller: Osama S4R/P-1400 Year of construction 2000 Working width max. 1400mm Working height max. 100mm Roll diameter 250mm 4 rolls Sold as one whole including conveyor belts and glue roller. Pjdpjwnhabjfx Abmjpl - Documentation available: No - CE certificate present: No - Material of press plates: Steel - Number of cylinders [pcs]: 6 - Heating type: Oil heated - Max. working temperature [°C]: 140 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, Feed through press Langzauner LZT-OK 70 E SO Year of construction 2005 Serial number 401-05-X077 Maximum press dimensions 3000x1500mm Maximum stroke 400mm Pressure 70T20kW, 31Amp, 380V 6cylinders Top plate 3000x1500mm, electrically heated Base plate 3400x1680mm, not heated With input and output conveyor. Dimensions:12000x2350xH2650mm, weight 6500kg - Year: 2005 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 401-05-X077 - Max. workpiece length [mm]: 3000 - Number of cylinders [pcs]: 6 - Total working pressure [ton]: 70 - Heating type: Electric heated Ppedpfx Aownh Hzobmol Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Price: On request Veneer press Feed-through press HOT Colombo Machine dimensions: 4400x1400 Oil heated input/output is included 8 cylinders Complete with glue roller etc. - Documentation available: No - CE certificate present: No - Number of stages [pcs]: 1 - Number of cylinders [pcs]: 8 - Heating type: Oil heated Financial information Pedewnhvvspfx Abmjpl VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Price: On request Feed through press Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Pedpfxowng S Aj Abmepl Maximum stroke 150mm Press pressure 400T 7.5kW, 380V 10 cylinders diameter 120mm Solid plates aluminum 90mm Top and heated, oil boiler included. With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. - Documentation available: No - CE certificate present: No - Serial number: 13350686 - Max. workpiece length [mm]: 4400 - Max. workpiece width [mm]: 1500 - Material of press plates: Aluminium - Number of cylinders [pcs]: 10 - Total working pressure [ton]: 400 - Heating boiler present: Yes - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2023, functionality: fully functional, CLT Cross-Laminated Timber (CLT) production line with CNC machining center Capacity: approx. 25,000 m³/year (2-shift operation) Functional Description / Scope of Supply: - Longitudinal lamella feeding: Loading – Singulation - Cross lamella feeding: Loading – Vacuum destacking – Feeding to planer - Formation and buffering of longitudinal layers: Longitudinal layer preparation and discharge station - Formation and buffering of cross layers: Two-stage cross layer buffer – Cross layer discharge station - Layup and gluing area: Vacuum layup gantry – Adhesive application gantry – Layup table - CLT press: TimberPress X331 - Outfeed area after CLT press: Cross transfer carriage to buffer stations, Reichenbacher system and discharge station with flipping unit - Reichenbacher CNC machining center CLT blanks (LxWxH): Min.: 6,000 x 2,000 x 60 mm Max.: 12,040 x 3,140 x 350 mm 3–9 layers Raw material: Longitudinal layers (LxWxH): Min.: 6,000 x 100 x 20 mm Max.: 12,040 x 280 x 50 mm Pjdpfxoxzy N Sj Abmopl Cross layers (LxWxH): Min.: 2,000 x 105 x 23 mm Max.: 3,140 x 285 x 53 mm Price and further information available on request.

Condition: excellent (used), Year of construction: 1988, Manufacturer: Agostino Colombo Model: G 1600 Year: 1989 Condition: Used Stock number: 0386 Press force: 1600 tons Number of pressure points: 2 Pedsxnx Hijpfx Abmepl Ram stroke: 135 mm Ram adjustment: 20 mm Die height from die holder cbra: 635 mm Die holder table size: 1,060 x 900 mm Lateral passage in the frame: 400 mm.

Condition: reconditioned (used), functionality: fully functional, Veneering press line for wood, consisting of the following machines: - OSAMA S2R glue spreader - 1300 mm - NEW MACHINE - Loader from glue spreader onto conveyor - Infeed conveyor, length 6000 mm x width 950 mm, motorized - ORMA hydraulic flat press 5100x1400 mm – 12 cylinders, hot water heating plates, refurbished - Outfeed conveyor, length 6000 mm x width 950 mm, motorized This press requires medium to high pressure to ensure the panels are 100% flat. Panel size: 5100 x 1400 mm (solid drilled steel plates) Daylight opening: 180 mm Full surface pressure: up to 10 kg/cm² Number of hydraulic cylinders: 12 units – cylinder diameter 140 mm MYLAR Teflon film on the plates Preparation for hot water plate heating – boiler not included Machine dimensions: 2300 x 5100 mm x height 2500 mm The machine is fully refurbished, calibrated, and tested. Price: €55,000 excl. VAT, without OSAMA glue spreader Price: €62,000 excl. VAT, including OSAMA glue spreader Psdpfjvva Syex Abmjpl

Condition: good (used), Obel Pedersen RF feed band press Opel Pedersen press type 2412 Pjdpfx Aodybr Rebmjpl Press length 2500 mm width 600 mm with gluing, carriage, HF generator T20 V and water cooling System has been released.

Condition: excellent (used), Picture 1 from manufacturer al example rest pictures original Manufacturer: Minda Designation: Timper Press V 200 Technical data: Main pressing pressure from below: Number of pressing chambers: 2 Podpehtd E Ajfx Abmopl Max. Blade width: 270 mm Max. Glulam length: up to 18 m Glue beam contour: straight Lateral alignment of the lamellas: included Pressure system: hydraulic Permanent pressure control: included Packing: separate Feeding / discharging: in longitudinal direction

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 8500x1800x2150 mm Weight 6000 kg Total power requirement 10 kw Ppjdpfx Asv A Hkcjbmol

Condition: refurbished (used), Year of construction: 1972, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 6619, Classic heavy-duty through-feed press featuring modern control technology with a uniquely large press bed Specifications • Brand: Paul Ott • Type: Through-feed press • Year of manufacture: 1972 • Press bed dimensions: 2300 mm x 3600 mm • Infeed and outfeed table dimensions: 3900x2560 mm • Maximum stroke: 140 mm • Number of cylinders: 8 • Pressing force: > 100 bar • Connected load: 380V • Control system: Siemens PLC • Heating: Top and bottom plates hydraulically heated • Infeed and outfeed: Fully automated or manual • Condition: Completely overhauled in 2020 and ready for operation This robust through-feed press has been thoroughly overhauled, both hydraulically and mechanically, and is equipped with a modern Siemens control system. It combines classic durability with contemporary automation technology, making it ideal for industrial applications requiring reliability and flexibility. Pjdpfjxgfgasx Abmepl Further information: • The machine can be viewed in operation at our site in Tilburg • Overhaul and maintenance reports available for inspection • Transport and installation can be arranged by agreement

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Ppsdjv Sthgopfx Abmsl Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1986, Equipment: hot water, THROUGH FEED VENEER PRESS LINE, FOR DOOR PRODUCTION Maximum press measures : L 4200 x 1400 mm Ppsdsw Ulv Eepfx Abmel Heating : Hot water Maximum pressure : 200 ton Glue station : MECMAN 800, spray glue, 8 pc. of spray guns, pump. Has been used for waterproof door production, polysteren on laminate/composite. Total length : Infeed rolls + press + outfeed rolls : 11000 + 5500 + 5000 = 21500 cm Can be examined in working condition

Condition: good (used), functionality: fully functional, High-frequency press for glulam beams up to 22 meters maximum pressing width: 1300 mm Ppedpfx Abew A Hk Ijmjl maximum pressing thickness: 300 mm loading conveyor 3,000 mm press with section-by-section polymerization (3 meters each)

Condition: used, Year of construction: 1995, functionality: limited functionality, machine/vehicle number: 6017, total length: 13,500 mm, total height: 2,090 mm, operating pressure: 250 bar, stroke length: 600 mm, Price on request. For sale: 3 double-sided, hydraulic vertical solid wood presses from Minda. We are offering three high-quality solid wood presses manufactured by Minda for sale. The presses can be purchased and operated individually or as a complete package. Technical Specifications: - Design: Double-sided, hydraulic vertical press - Number of press chambers per unit: 2 - Application: Pressing lamella packages into beams or glulam according to DIN 1052 - Pressure monitoring: Automatic - Pressure shoe clearance: 800 mm Special feature: The press force of the first pressure shoe can be individually adjusted – ideal for the production of glulam beams of various lengths. The machines are in good condition. Availability: Immediately Sale: Individual units or as a complete package Location: Allendorf Technical Data: - Max. pressing length: 13,500 mm - Max. lamella width: 320 mm (chamber width 395 mm) - Min. lamella width: 85 mm - Chamber height: approx. 2,090 mm (clear opening) - Pressing height: max. 2,000 mm / min. 1,550 mm - Specific press force: 1–12 kp/cm² - Vertical cylinder stroke: max. 600 mm - Horizontal pressing force per side pressure unit: approx. 8 Mp - Horizontal cylinder stroke: max. 312 mm - Infeed height of roller conveyor: approx. 920 mm - Feed rate: 15 m/min - Vertical pressure point spacing: 400 mm - Horizontal pressure point spacing: 800 mm (1,600 mm) Ppjdpfx Abjwwgz Asmel Operating pressure: (Fill pressure) min. 50 bar (Pressing pressure) max. 250 bar

Condition: used, IDC000109 - Obel Pedersen RF feed band press type T20V - Press length 2500 mm width 600 mm - HF generator T20 V and water cooling Pedpfsvgddhex Abmepl

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Throughfeed Press Sergiani + Automatic Loading and Unloading Year of manufacture: 1999 Ppodpfxor Eqpfs Abmel Technical condition: Very good, machine fully operational Technical specifications: - Working width: 130 cm - Working length: 4000 cm - Automatic loading and unloading system - Press tables heated with water - Installation and commissioning available for an additional fee.