Used vertical turning lathes for sale (183)

Condition: ready for operation (used), Year of construction: 2018, CNC vertical lathe, 4 axes Brand: UMARO Model: SC27 Lrjdpfxow Add Eo Akqek Year: 2001 / 2018 (retrofit) CNC: FANUC 0i Specifications: Turning capacities: Max pass-through diameter: 2650 mm Max turning diameter: 2600 mm Max turning height: 1900 mm Table: Diameter: 2500 mm Max load: 15 t Turning speed (2 ranges): 1 to 112 rpm Main motor power: 75 / 60 kW Cross rail carriages: Vertical travel of right carriage: 760 mm Vertical travel of left carriage: 580 mm Cross rail: Vertical travel: 1600 mm Dimensions (W x D x H, fully extended): 5 x 4.8 x 4.8 m Equipped with: Grinding spindle on left carriage Set of 4 jaws

Condition: good (used), Year of construction: 1999, control SINUMERIK 840D spindle head Ø 640 mm turning length 1000 mm Lrjdowzmqxopfx Akqek

Condition: good (used), Year of construction: 2006, control Rexroth Ljdpfowzmriox Akqork

Condition: used, Year of construction: 2012, turning diameter 320 mm turning height 750 mm Control Siemens max. turning speeds 4500 min/-1 drive capacity - main spindle 26,8 / 20,9 kW max. torque 256 / 200 Nm Lrodpfxjxq Hkzs Akqok spindle bore 52 mm spindle head KK A6 (DIN 55026) chucking diameter max. 315 mm number of tool places 8 Pos. tool taper Capto C5 max. workpiece diameter 50 mm max. workpiece weight 0,5 kg x-axis 450 mm z-axis 300 mm rapid traverse x 45 / z 40 m/min total power requirement 68,3 kW weight of the machine ca. 11,0 t dimensions of the machine ca. L 3,7/4,2 x B 1,6 x H 3,0 m In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2001, turning diameter 220 mm Control Fanuc 18i x-travel 390 mm z-travel 435 mm tool taper VDI 40 number of tool places 12 Pos. spindle tunring speed 4.500 U/min The machine is untested and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Lrsdpfx Akewth Szsqek Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1000 mm swing diameter: 1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission Lrsdpfx Akjt Rmdzjqjk with range switching. Spindle speeds Speed ??range I: 5 - 350 rpm. Speed ??range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis *

Condition: excellent (used), Year of construction: 2014, control Fanuc 31/32 i 2 chucking diameter 170 mm swing diameter 210 mm x-travel 400 mm z-travel 200 mm Ljdpsyvvupofx Akqsrk length 2500 mm width 1900 mm height 2300 mm weight 5500 kg

Condition: used, Year of construction: 2003, turning diameter 220 mm Control GE Fanuc 18i-TB x-travel 400 mm z-travel 450 mm tool taper VDI 40 number of tool places 12 Pos. spindle tunring speed 6.000 U/min Number of working hours 10741 h work stroke 150 mm X-Achse Lsdpoyf N D Iofx Akqork range L-W-H 3100 x 2000 x 3200 mm weight 6500 kg rapid power traverse in X-and Z direction 60/30 m/min EMAG VL5 vertical lathe, built in 2003, very good condition, ready for use, but currently not in operation. Accessories: Extraction system 9 tool holders, 4 of which are driven tools 1 pallet Various workpiece carriers

Condition: good (used), Year of construction: 2005, TECHNICAL SPECIFICATIONS OF THE MACHINE WORKING DIMENSIONS Table diameter: 1,300 mm Maximum turning diameter: 1,500 mm Minimum internal turning diameter with boring bar: 450 mm Maximum turning height: 1,700 mm Vertical travel of the ram: 1,000 mm Lrjdpfeyyc Ansx Akqek Vertical travel of the crossrail: 1,400 mm Height from faceplate to floor: 970 - 5 mm Number of tool turrets: - 700 mm Tool holder shank section: 40 x 40 mm Ram tool holder section: Square 280 - 300 Machine weight: 27,000 - 30,000 kg Tool model: TOOL CAPTO & ISO50 GENERAL DATA CNC control: SIEMENS 840DD Number of columns: 1 Total machine length (depth) approx.: 4,500 mm Machine width approx.: 5,600 mm Machine height approx.: 6,350 mm Number of T-slots for flange clamping: as per ROHM faceplate T-slots: as per ROHM faceplate Number of slots for jaw mounting: 4 Maximum admissible table load: 5,000 kg Maximum table torque: 2,165 kgm Maximum cutting force: 4,500 kg FEED RATES - WORKING FEED "X" axis slide: 0.1 - 3,000 mm/min "Z" axis ram: 0.1 - 3,000 mm/min Crossrail bridge: 6 / 600 mm/min "C" axis table (milling): 0 - 3 rpm "C" axis table (turning): 0 - 400 rpm - RAPID TRAVERSE "X" axis slide: 7,500 mm/min "Z" axis ram: 5,000 mm/min Crossrail bridge: 600 mm/min

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec Ljdjytn Emspfx Akqjrk MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 745 mm, travel distance Z-axis: 300 mm, spindle motor power: 18,000 W, spindle speed (max.): 4,500 rpm, total height: 3,200 mm, overall weight: 7,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840Dsl, number of axes: 2, This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with up to 28kW power at 40% duty cycle and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us. Additional equipment • Coolant tank capacity: 360 liters Machine Benefits Technical Machine Benefits • High working accuracy, rapid traverse speeds, high maximum speed of driven tools • Machine from single shift operation Lodpfx Aoytfppokqork • Maximum room temperature: up to 30°c • Maximum humidity: 50% • Sound pressure level: 78db(a) Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes Dimensions Machine Depth 3900 mm

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 7-41 5157 40, The Pittler PCC vertical lathe, serial number 7-41 5157 40, was built in 1999 and corresponds to the PV SL 1/1-1 model. This CNC-controlled vertical lathe is designed for the precise machining of workpieces up to 300 mm in diameter. Technical specifications of the PCC Pittler Max. turning diameter: 300 mm Travel: X-axis 920 mm / Z-axis 250 mm C-axis: available Chuck diameter: 250 mm Spindle speed: 28–7000 rpm Spindle power: 23–29 kW Max. torque: 150–188 Nm Spindle bore: 60 mm Tool turret: 8 positions Control system: Siemens Sinumerik 840D Coolant and chip conveyor: integrated Machine weight: approx. 6.5 tons Connected load: 54 kVA at 400 V / 50 Hz This machine is designed for automated operation and is particularly suitable for machining small to medium-sized workpieces with high precision. Lrjdpfx Akowlaqysqok Availability and further information: Several machines of this type, built in 1999, are currently available, including those with the machine numbers 7-41 5157 35 and 7-41 5157 36. These are located in Germany and are in good used condition.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 06800001511, Used: CNC vertical lathe Manufacturer: DMG/ GILDEMEISTER Lrjdpfxewzk D Ae Akqek Model: CTV250 Year of manufacture: 2003 Serial number: 06800001511

Condition: used, Year of construction: 2017, Technical details: Lsdpjyruu Ssfx Akqsrk turning diameter: 150 mm

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, overall weight: 6,000 kg, number of axes: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Additional equipment • shopturn option Machine Benefits Technical Machine Benefits • Availability from • Weight: 6000kg • 40 kVA • 58 A In max • 63 A • 400 V • 50 Hz • Control system: Siemens Sinumerik 840D Slimline • Main drive: AC main drive 25 / 32 kW • Duty cycle: 100% / 40% ED • Spindle speed: 5000 rpm • Torque: 280 / 360 Nm • Hollow clamping cylinder • 12-position turret with tool holder • Turret diameter: 340 mm • Hinged belt chip conveyor • 4-color status signal light • Air blow through main spindle • C-axis with driven tool system for turret UDI 40 • Drive for all tool stations • Y-axis travel +90 / −65 mm • Linear guideway system • Ball screw spindle • AC servo motor with integrated absolute encoder • Glass scale on guideways • Rapid traverse speed: 30 m/min • Coolant system 8 / 20 bar • Coolant tank capacity: 600 liters • Coolant pump flow rate: 8 bar / 20 l/min • High-pressure pump flow rate: 20 bar / 40 l/min • Coolant supply via turret disk to all turret stations • Band filter system filtration grade: 40 µm • Coolant level monitoring • Integrated working area extraction max. 400 m³/h • Workpiece probe Renishaw LP2DD • Probe installed at loading and unloading station • Stylus with pneumatically actuated flap and electrical control • Measuring accuracy: 10 µm • Function plate for additional tools • Machine cabinet temperature control max. 40°C • Electrical cabinet cooling unit up to 40°C • Hydraulic oil cooler • Remote diagnosis support via internet • Working area flushing with 3 flushing screw connections • Two separately switchable valves with 8 bar pressure • Workpiece discharge conveyor for part transport system SRA 160 • Workpiece diameter: 100 mm • Continuous workpiece transport system SRA 160 in drag chain design • Storage capacity: 30 workpieces diameter 30–70 mm max 7 kg • Storage capacity: 18 workpieces diameter 30–100 mm max 15 kg • Maximum workpiece height: 160 mm • Maximum total workpiece weight: 320 kg including pallets • Loading height approx. 800 mm • Chain conveyor belt with transport prisms • Drag chain movement controlled by NC axis • Set of drag frames • Workpiece diameter minimum 30 mm maximum 160 mm Lrsdpex D Nl Ijfx Akqek • Light barrier for workpiece transport system pick-up station • Hold-down device for loading pallets SRA 160 • Robot interface Profinet • Electrical interface for 6-axis robot via Profinet • Power chuck centering and face clamping chuck • Intermediate storage tray supported on function plate • Air blow cleaning for inner workpiece area • Measuring probe with air blow with two nozzles front and rear • Clamping pressure adjustment with motor-controlled valves • Clamping pressure programmable via NC program • Extension of chip discharge chute on chip conveyor by 300 mm • Aluminium machining package • Modified slurry pump on chip conveyor • Forced indexing of band filter • Larger chip container • Extension of plug-in screens from chip conveyor • 3D data model of machine working area in STEP and IGES format • Delivery of 3D model on CD • PLC / SPS source code including hardware configuration of Siemens control in English

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 495 mm, travel distance Z-axis: 780 mm, spindle motor power: 37,000 W, spindle speed (max.): 2,000 rpm, total height: 3,636 mm, total width: 2,860 mm, controller manufacturer: FANUC, controller model: 0i-F Plus iHMI-Touch, product length (max.): 2,005 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. As new, showroom model. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details. • Condition: Showroom machine, like new • Chuck size (main spindle): 15" (380 mm) • Bar capacity: 60 mm • Rapid traverse (X/Z): 20 / 20 m/min • Spindle torque: 2,592 Nm • Max turning diameter: 830 mm • Max turning length: 690 mm • Tool stations: 12 • Tool holder: BMT 75P • Guideway type: Box guideway • Monitor size: 19" • Main features: • Powerful, very compact vertical turning center • Standing spindle; optimal crane loading and operator accessibility • Extremely rigid cast bed • High torque main spindle • Compact machine design • Optionally driven tools with high torque • High-quality, robust box guideways • Rapid traverse up to 20 m/min Additional equipment • Coolant pump, 10 bar • Oil skimmer • 3-color warning light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder included. Technical Specification Driven Tools No Ledpjyrr Rwsfx Akqsrk

Condition: ready for operation (used), Year of construction: 1977, spindle motor power: 80,000 W, overall weight: 25,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D PL, number of axes: 3, This 3-axis MORANDO VFN13 vertical turning machine was manufactured in 1977 and retrofitted in 2009 with a new Siemens 840D PL control. It features a 1600mm hydraulic chuck, dual Z-axis, and a revolver magazine. Capable of handling a maximum turning diameter of 1,500mm and a height of 800mm, it offers robust performance with a spindle motor power of 80 kW. If you are looking to get high-quality turning capabilities consider the MORANDO VFN13 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Maximum swing: 1500 mm • Gear steps: 2 pcs • Max spindle speed, low gear: 75 rpm // max spindle speed, high gear: 200 rpm • Max torque, low gear s1: 15300 nm // max torque, high gear s1: 5100 nm • Horizontal movement: 1000 mm • Vertical movement: 875 mm • Rapid traverse: 5000 mm/min • Maximum turning diameter: 1500 mm • Maximum turning height over chuck: 800 mm • Free height under slide: 830 mm Extra Information Lrodpfx Akjyaqrpoqok Table Chuck diameter: 1600 mm Max speed: 330 rpm Max clamping force at 70 bar: 16000 kg Clamping range, internal: 450 – 1550 mm Clamping range, external: 650 – 1350 mm Tools Tool changer size: 440 x 440 mm Minimum center distance between tool changers: 600 mm

Condition: ready for operation (used), Year of construction: 2005, number of axes: 2, This Okuma LVT 300 was manufactured in 2005. It features a stable, precise design with recent upgrades including a new SMW clamping cylinder and chuck in 2020, and a completely overhauled Z-axis with new guideways and spindle. Additional features include an EWAB conveyor for automated parts logistics and extensive tool holders. Consider the opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. • 2020: SMW clamping cylinder replaced • 2020: SMW chuck replaced • Z-axis completely overhauled: new guideways, new spindle • Stable, precise Okuma design Additional equipment Lsdsynbdrjpfx Akqsrk • EWAB conveyor for automated parts logistics • Original Mayfran chip conveyor (replaced in 2022) • Many jaws included • Extensive tool holders included

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,385 h, travel distance X-axis: 400 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 7,500 rpm, overall weight: 5,500 kg, controller manufacturer: SIEMENS, number of axes: 3, It's System of 2 EMAG VL03 horizontal turning machines that were manufactured in 2012 and 2010. It features a Fanuc control system, Series 32i-Model A, with a travel range of 400x200mm and a spindle speed of up to 7,500 rpm. The system machine includes a 12-station tool turret with VDI 40 tool holders and a tool drive of 6,000 rpm. Consider the opportunity to buy this horizontal turning machine system with robot included. Contact us for more information about this system. Additional equipment • Tool Storage: Conveyor belt for max. 27 workpieces • Workpiece Feed: Vibratory spiral conveyor, vibrating plate, single workpiece feed • Handling Robot: 8-axis • Protective Enclosure: Robot cell • Scraper Belt Conveyor Lredpfsx Nr Skox Akqek • Oil Mist Extraction • Cooling System: Cooling capacity 3 kW • Chip Container: 700x700x600 mm Machine Benefits Technical Machine Benefits • Diameter: 30-130 mm • Max height: 145 mm • Tool drive: 6000 rpm Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 345 mm, travel distance Z-axis: 462 mm, controller manufacturer: MAZATROL, controller model: Smooth G, number of axes: 2, This Mazak Mega Turn 500 was manufactured in 2017. A robust vertical turning machine featuring a Mazatrol Smooth G control unit, it offers a maximum workable diameter of 500 mm and includes a 12-position turret plus a 10-station ATC with Capto C6. Additional features include a high-pressure coolant system at 15 bar and an automatic tool presetter. Contact us for more information about this machine. Additional equipment Lrsdpsyalppsfx Akqok • High Pressure Coolant System: 15 bar • Automatic Tool Presetter: Yes Machine Benefits Technical Machine Benefits • Maximum workable diameter: 500 mm • Turret configuration: 12-position turret + 10-station atc with capto c6 Extra Information Machine still under power

Condition: used, Year of construction: 2001, swing diameter max. 450 mm chucking diameter 400 mm control Siemens 840D (Index) Max. rpm 4.200 min/-1 power capacity - main spindel ( 35,5 / 56 ) kW max. Torque ( 340 / 550 ) Nm C-Axis 0,001 ° number of toolpositions 2x 12 pos driven statition 2x 12 pos worktool system VDI 30 max. spindle speed driven tools 6.000 U/min. power capacity - driven tools 9,5 kW max. Torque 40%: 19 Nm Y - Axis +/- 90 mm B-Axis +270° / -90 ° x-axis 730 mm z-axis 340 mm y-axis +/- 90 mm b-axis +270° / -90 ° rapid traverse X: 40 / Z: 30 m/min numbers of pallets 24 pos. size of pallet 410 x 300 mm max. workpiecediameter 300 mm max. workpiece weight incl. Pallet: 25 kg Chain width 75 mm band speed 7,5 m/min total power requirement 56 kW weight of the machine ca. 9,0 t dimensions of the machine ca. 8,5 x 6,0 x 2,7 m CNC - Vertical Lathe INDEX - V 300 Y/B - incl. 24 pos. palett changing system Schnaithmann Ljdpfxsyq Sk Io Akqjrk - incl. ball screw as spare part - incl. 39x driven tools - incl. 39x tool holders

Condition: used, Year of construction: 2007, Technical details: faceplate diameter: 1600 mm power requirement: 80 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 4,4 x 4,62 m max. workpiece diameter: 2000 mm Lrodpfx Ajx Aq E Hokqjk max. diameter of face turning: 1800 mm tool taper: ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis *

Condition: used, Year of construction: 1989, spindle motor power: 160 W, chuck outer diameter: 6,000 mm, turning diameter: 6,300 mm, turning height: 3,200 mm, STANKO 1563 TABLE DIAMETER: 6000 mm TURNING DIAMETER: 6300 mm Lrsdpfxsyypczj Akqek WORKPIECE HEIGHT: 3200 mm RAM STROKE: 2000 mm RETROFITTED: 2004 CNC: NUM 1060

Condition: used, Year of construction: 2020, turning diameter max. 3.800 mm diameter of spindle flange 1.900 mm max. swing diameter 3.800 mm control 840 D sl Siemens turning speed range - main spindle max. 100 min/-1 power capacity - main spindel 200 kW max. Torque 67.000 Nm gear box 1:30 tool taper Capto C8 swivellable B: 0 - 270 ° Spindle speed - driven tool pos. max. 6.000 min -1 max. Torque 120 Nm tool taper Capto C8 number of toolpositions 41 pos. max. tool weight 20 kg max. tool length 400 mm max. tool diameter 120 mm 0 125 mm tool taper Capto C8 number of toolpositions 25 pos. workpiece diameter at full load 150 mm max. tool weight 20 kg max. tool length 400 mm x-axis 1: 2.800 mm x-axis 2: 3.200 mm z-axis 1.000 mm rapid traverse X: 32 / Z: 20 m/min feed power X/Z: 22 kN total power requirement 280 kVA weight of the machine ca. 155 t dimensions of the machine ca. 10,4 x 6,3 x 5,7 m CNC Vertical Turning Machine PITTLER - PV 4000 - Control Expansion / Software SINUMERIK 828D/840D SL ProgramSYNC Software Option - 12-Jaw Compensating Chuck by RÖHM - Retractable Step Guards Lrjdpfeyrhl Djx Akqsk - Coolant Circulation - Coolant Conditioning - Oil Hose Skimmer - SIEMENS Safety Integrated - Network Interface / Data Transfer DNC Option - Remote Diagnostics for NC Functionality - Teleservice for Integrated PLC of the Sinumerik 840D - Ethernet Connection in the Control Cabinet - Variable Speed ??Range to Reduce Vibration - Air Purifier, Electrostatic Discharge - Probe for In-Process Workpiece Measurement - Walk-in Work Area

Condition: used, Year of construction: 2021, turning diameter max. 2.800 mm diameter of spindle flange 1.100 mm max. swing diameter 3.000 mm control 840 D sl Siemens turning speed range - main spindle max. 230 min/-1 power capacity - main spindel 206 kW max. Torque 53.000 Nm tool taper Capto C8 swivellable B: 0 - 270 ° Spindle speed - driven tool pos. max. 6.000 min -1 max. Torque 120 Nm tool taper Capto C8 number of toolpositions 41 pos. max. tool weight 20 kg max. tool length 400 mm workpiece diameter at full load 150 mm tool taper Capto C8 number of toolpositions 25 pos. workpiece diameter at full load 150 mm Lrodpfeyrhlwox Akqjk max. tool weight 20 kg max. tool length 400 mm tool taper Capto C8 x-axis 1: 2.700 mm x-axis 2: 2.700 mm z-axis ( 2x 1.000 ) mm rapid traverse X: 40 / Z: 24 m/min feed power X/Z: 22 kN total power requirement 200 kVA weight of the machine ca. 120 t dimensions of the machine ca. 10,4 x 6,3 x 5,7 m CNC Vertical Turning Machine PITTLER - PV 2500 - Control Expansion / Software SINUMERIK 828D/840D SL ProgramSYNC Software Option - 12-Jaw Compensating Chuck RÖHM - Retractable Steps - Coolant Circulation - Coolant Conditioning - Oil Hose Skimmer - SIEMENS Safety Integrated - Network Interface / Data Transfer DNC Option - Variable Speed ??Range to Reduce Vibration - Air Purifier, Electrostatic Dispersal - Touch Probe for In-Process Workpiece Measurement - Walk-in Work Area