Condition: new, Year of construction: 2025, Base for ZX 7045 milling-drilling machine Dcobjvxtn Ts Hb Ui Eeg

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: L705226, TECHNICAL DATA Manufacturer: Baron Max Model: KL-2680 Year: 2007 Serial Number: L705226 Dcjbovai Swo Hb Ui Eog Control Unit: Fagor 8055TC WORKING CAPACITY Swing over bed: 670 mm. Center height to bed: 335 mm. Center height to top cross slide: 205 mm. Swing over cross slide: 400 mm. Dis. Between centers: 2100 mm. Width of bed: 450 mm. HEADSTOCK Spindle nose: A1-11 Spindle bore: 305 mm. Bar capacity: Ø 105 mm. Range of spindle speeds: 3 rang Gears Auto Shifting Spindle speeds range: H: 1500-331 rpm M: 330-93 rpm L: 92-24 rpm Taper in spindle: MT#6 SADDLE Longitudinal travel (Z-axis): 2000 mm. Cross-slider travel: 450 mm. Size of tool holder: Boring Tool: Ø 40 mm. O.D. Tool & Facing Tool: 25 mm. Ball screw (Dia x pitch): X-Axis: Ø25 mm. x P 5 mm. Z-Axis: Ø50 mm. x P 10 mm. TAIL STOCK Quill diameter: Ø105 mm. Quill travel: 220 mm. Quill taper: MT#5 ENGINE Spindle motor: 20HP Z-axis drive motor: 12 Nm. (FKM 44.3) X-axis drive motor: 6.3 Nm (FKM 42.3) Coolant pump motor: 1/4 HP X, Z-AXES FEED X axis rapid travel: 6 M/min. Z axis rapid travel: 8 M/min. GENERAL Power Required: 20 KVA. Floor space (L x M x H): 4090x1950x1820 mm. Approx, machine weight: 4700 Kgs. EQUIPMENT Coolant system Manual 4-way tool post 4 Jaws Self-centering scrolling chuck Ø 12". Steady rest

Condition: good (used), Internal article no.: 24036 Column drilling machine Solid TB 16S 2 speed levels Spindle holder: MK2 Quill stroke: 100mm (with adjustable depth stop) Stepless speed adjustment. (250 - 4000 rpm) Dcsbott Aiqj Hb Ui Eog Table: 320 x 260mm The cover on the main switch is missing. For safety reasons, this MUST be replaced before commissioning. Dimensions (LxWxH): 60 x 40 x 170cm Weight: approx. 300Kg

Condition: good (used), Year of construction: 1987, Work table 500mm x 1200mm cantilever travel 600mm Tool holder MK 4 drilling capacity 40mm in steel Tapping device Dcobjtwmy Do Hb Ui Esg Coolant device Protective device on the drill

Condition: new, bore capacity in steel (diameter) 40 mm Dceb Hb Uovn U Awei Eog throat 300 mm bore stroke 120 mm spindle taper MT 4 MK table: 500 x 460 mm column diameter 115 mm turning speeds 75- 3200 U/min feeds 0,1 - 0,18 - 0,26 mm/U total power requirement 1,5 kW weight of the machine ca. 350 kg range L-W-H 2,2 x 0,8 x 0,7 mm Column drilling machine with: Thread cutting function. Digital depth display Coolant system 2 stage motor Spindle protection Swivel table Pivoting drill head LED lighting Packaging dimensions: 730x760x188mm Weight 340kg

Condition: good (used), Alzmetall AB 3 ES - Pillar drill -Drilling capacity / steel 35mm -Thrust 280mm -Drilling stroke 180mm -MK 3 mount -Table size 600x470mm -Continuous speed control -Drilling depth stop -Drill chuck Dcjb Hovtzrveb Ui Eeg -Documentation Dimensions: LxWxH1.2x0.8x2.1 meters / weight 550 kg Errors / input errors reserved

Condition: new, Year of construction: 2025, This machine can be used for drilling, reaming and boring holes up to 45/40 mm in cast iron, threading up to M12 mm bolts, up to 80 mm milling and up to 22 mm notching. It is also useful for cutting and frontal milling. ZX 7045 B1 is by default equipped with an autofed spindle and a cooling system. Base available optionally. Rigid, sturdy cast iron Autofed spindle Milling machine height adjusted on the support, not on the column Additional flood coolant system Rigid cross table with precisely ground surface Dovetail-shaped guides Quiet work due to the ground gears Left/right rotation +/- 90° rotary head Adjustable head height Base available optionally Technical data Steel drilling efficiency 32 mm Cast iron drilling efficiency 45 mm Frontal mill diameter 80 mm Arbor mill diameter 28 mm Spindle speed 50–3024 rpm (6/12) Arbor chuck MK4 Spindle feed 110 mm (automatic feed) Dob Hb Uijvxth Hj Eecg Worktable dimensions 820 mm×240 mm Maximum distance from spindle to table 475 mm X-axis longitudinal travel 550 mm Y-axis transverse travel 170 mm Left/right rotary head 90° Motor power 1.3/1.8 kW Power supply 400V Weight 360 kg

Condition: new, Precise, smooth-rolling standard drill, high accuracy and quality. Drill table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection Dcjboda Nqxo Hb Ui Ejg -Star handle in stock, available now

Condition: good (used), Internal article no.: 24035 Column drilling machine Dsb Hb Uiott Ahpo Escg Solid TB15 2 speed settings Left-right rotation Spindle holder: MK2 Quill stroke: 100mm (with adjustable depth stop) Speed adjustable via belt. Speed levels unfortunately not visible. (Presumably up to 4000 rpm) Table: 320 x 260mm Dimensions (LxWxH): 60 x 40 x 170cm Weight: approx. 300Kg

Year of construction: 1985, Condition: good (used), Travels: X-axis 9.500 mm Y-axis 4.100 mm Z-axis 950 mm W-axis 900 mm Main spindle speeds (infinitely variable) 3,15 to 1000 rpm Spindle motor power 58 kW Feed range (infinitely variable): X-axis 0,1 - 9600 mm/min Y-axis 0,1 - 5600 mm/min Z-axis 0,1 - 5600 mm/min W-axis 0,1 - 5600 mm/min Dcjb Hb Uod Svh Hji Esg Accessories - Floor plate 6 x 4 m (CNC controlled B- and V-axis) - Table 2 x 2 m

Condition: good (used), Floor drilling machine MK3 from ERD* - MK3. Drilling machine, floor drilling machine, pillar drilling machine -Delivery: in as-is condition as inspected -Motor: HEW 0.8 kW -Table size: Ø 355 mm -Spindle holder: MK3 -Travel distance: 500 mm -Outreach: 300 mm -Pillars: Ø 110 mm -Spindle stroke: 150 mm -Transmission via: V-belt -Dimensions: 850/500/H1850 mm -Weight: 294 kg Condition: used Dcob Hb Ujtvfhvji Eog

Condition: good (used), DIGITAL BORING COLLET Djbs Dv N Ij Hb Ui Ejcg

Year of construction: 1990, Condition: used, cutting diameter 420 mm Dcob Hol Ichnjb Ui Esg saw band length 4800 mm table height 600 mm total power requirement 3,8 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 2500 x 1200 x 1600 mm

Condition: new, Continuous drilling capacity in St 60: 15 mm Normal drilling capacity: 18 mm Tapping capacity: M 8 spindle: MK 2 drilling depth: 80 mm throat depth: 180 mm spindle speeds infinitely variable 200 - 4,000 rpm spindle speeds for threads 200 - 700 rpm distance spindle/table: up to 380 mm Djb Hb Ujb Eldnei Escg table surface: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full threading device and programmable digital display machine in stock and immediately available

Year of construction: 1983, Condition: good (used), Scharmann boring mill Ecocut 1.1 TDV 3 / Retrofit in 2015, year of construction 1983 / retrofit in 2015 by Scharmann Control Siemens 840 D, travel X/Y/Z/W 2000/1450/1400/600 mm, table clamping surface 120 x 1600 mm, Enclosure open top installed in 2015, feeds up to 6 m/min, spindle speed up to 3,000 rpm - 30 KW, machine does not need foundation !!!! because of own designed polymer bed, max workpiece weight 12.000 Kg, machine weight 24.350 Kg, complete documentation, SK 50 mounting, Ø spindle 125 mm, Additional device: A CNC-controlled faceplate is integrated in the drilling spindle sleeve. With this device, contours up to Ø600 can be turned. Services provided for retrofit Debom Udqhj Hb Ui Ejcg The machine was overhauled electrically and mechanically by Scharmann, most recently in 2015. During the overhaul, the complete electrical system was replaced, and the control system was converted to Siemens 840 D. In the area of mechanics, the roller recirculating shoes and ball screw in the Z-axis were replaced, and the headstock together with the guide and Fleyer chains for the counterweights were checked or replaced. In addition, a machine housing (open at the top) was installed by HCR, which was installed by Scharmann in the safety concept including operating mode 4. The machine was not installed underfloor in a foundation, but 600 mm high on a specially designed polymer bed. This is lucrative for potentially interested parties, as there are no costs for a foundation! In 2017, the CNC faceplate, differential gear and drill spindle unit were disassembled and overhauled at the Scharmann factory. (New bearings, seals gears)

Condition: new, Bernardo Twist Drill Set 25pcs. Dcsboikamfs Hb Ui Eeg - 1 -13 mm - 0,5 mm rising - HSS TiN - coated

Condition: new, Drilling capacity max.: 30 mm Thread cutting: M 16 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German Documentation and German Service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 Dsb Hb Ued R Nv Ioi Escg - Coolant device - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: new, Drilling capacity max.: 35 mm Thread cutting: M 24 Tool rear ham: MK 4 Spindle speeds, infinitely variable: 65 - 2000 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 115 mm Table size / T groove size: 685 x 485 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - Gearbox pre-bed Dcebed Sd Tvs Hb Ui Eeg - CE / IEC, German Documentation and German Service Delivery: - Table clamping and height adjustment from the front - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant device - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: new, Stepless pillar drilling machine for versatile applications. Equipped with digital speed display as standard. Drilling table adjustable via toothed rack and swivels around the column. Motor protection switch, star grip. Picture shows SB 25 S Technical data: Drilling capacity: 30 mm spindle: MK 3 drilling depth: 130 mm throat depth: 250 mm spindle speed, infinitely variable: 230 - 2700 rpm table size: 460 x 360 mm column diameter: 100 mm dimensions, approx. (WxDxH): 600 x 810 x 1780 mm motor power: 1,5 kW Mains connection: 400 V Weight, approx.: 230 kg Equipment: - Stepless speed adjustment with digital display - right / left rotation - T-slot stones - 24 V electrics - Height adjustable spindle protection device with micro limit switch - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivels around column - Reversing switch for R/L-run (option) Scope of delivery: - Machine light - emergency stop pushbutton - full motor protection - star grip Deb Hb Uop Duagoi Eecg - CE

Condition: new, Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Tapping steel Ø: 40 mm Tapping capacity cast iron Ø: 50 mm Diameter of the column: 300 mm projection (min/max): 305 - 1275 mm travel of the spindle head (horizontal): 970 mm distance spindle nose - base plate (min/max): 438 - 1330 mm Traverse height of the cantilever: 625 mm Clamping surface of cube table : 635 x 520 x 420 mm size base plate : 1830 x 785 x 185 mm spindle mounting: MK 5 spindle stroke: 270 mm Speeds: (12) 44 - 1206 min-1 feeds: (3) 0.06 / 0.10 / 0.20 mm/rev. Dob Hjp Atipeb Ui Escg Motor power, approx.: 3,7 kW Total height, max.: 2795 mm Weight, approx.: 2300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping. - A special lift safety device prevents the arm from falling off abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard Equipment: - Threading device - Coolant device incl. pump - machine light - cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - protection device for spindle - CE

Condition: good (used), Table size: - horizontal: 500 x 600 mm - vertical: 310 x 600 mm Tiltable: 90° Dimensions LxWxH, approx.: 700 x 520 x 520 mm Weight, approx.: 280 kg Djb Hbed Ttico Ui Escg Item no.: WW12214

Condition: new, Infinitely variable pillar drill with fully-fledged tapping unit. Equipped with digital speed display as standard. Drilling table adjustable via rack and swivels around the column. Motor protection. Technical data: Drilling capacity: 40 mm Thread cutting: M 24 Spindle: MK 4 Drilling depth: 150 mm Spindle speeds, infinitely variable Range A: 65 - 540 1/min Range B: 245 - 2000 1/min throat depth: 265 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 115 mm Table size: 560 x 470 mm / 14 mm Base plate size: 685 x 485 mm Dimensions, approx. (W x D x H): 580 x 950 x 2000 mm Connected load: 1.7 kVA Weight, approx.: 370 kg Equipment - Gearbox reduction gear - Large machine table - Digital speed display - Stepless speed adjustment - Thread cutting device Dcjb Hbjqfdyws Ui Esg - Table clamping and height adjustment from the front - Drilling depth stop - Overload protection Scope of delivery: - Coolant device - Two MK 3/2 reducing sleeves - LED machine light - Height-adjustable protective cover with micro limit switch - Operating instructions - CE/IEC conformity

Condition: new, MIOTAL® GB 50 VG geared pillar drilling machine with thread cutting device Technical data: Dcsb Hb Uispxmlis Esg Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm throat depth: 340 mm table size: 600 x 600 mm column diameter: 180 mm number of T-slots: 2 T-slot size: 22 x 35 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device - Automatic spindle feed - Thread cutting device - LED machine light - Height adjustable protective cover - Table rotatable - Manual fine feed - Limit switch protected spindle

Condition: new, Continuous drilling capacity in E 335: 18 mm Normal drilling capacity: 20 mm Tapping capacity: M 12 Spindle: MK 2 Drilling depth: 100 mm throat depth: 225 mm Speed range A: 100 - 2,000 min-1 Speed range B: 200 - 4,000 min-1 Debecw H Sys Hb Ui Escg Spindle/table distance: 60 to 440 mm Table surface: 345 x 372 mm Column diameter: 90 mm Total height: 955 mm Weight: 110 kg Frequency-controlled three-phase motor: 1.5 kW Powerful, precise universal drill with a wide range of applications. Table/height adjustment via gear rack and worm gear. Three-phase motor, reversing switch right/left rotation, digital speed display, speed adjustment via potentiometer. UNIMAX 2 T with height adjustment from the front. Mains connection 230 V.

Condition: new, Continuous drilling capacity in St 60: 35 mm Normal drilling capacity: 40 mm Dobsb Nbvgo Hb Ui Ejcg Tapping capacity: M 30 spindle: MK 4 feed infinitely variable: 20 - 400 mm/min drilling depth programmable: 175 mm throat depth: 300 mm distance spindle/table: 70 to 830 mm table surface: 550 x 400 mm column diameter: 120 mm total height: 1.980 mm weight: 450 kg motor pole-changing: 1,5 / 3,0 kW spindle speeds stepless range A: 120 - 2.500 rpm Spindle speeds infinitely variable Range B: 60 - 1,200 rpm