Condition: used, Year of construction: 1987, sheet width - max. 2035 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control TOUCH total power requirement 8.5 kW weight of the machine ca. 3100 kg range L-W-H 2416 x 2250 x 1760 mm Machine from training workshop good / well-maintained condition (!!) Equipment: - electro-hydraulic NC guillotine shears - electro-motoric back stop * with NC control unit (ELGO) - electric cutting length limit - manual cutting gap adjustment - front support table including recessed grips - 1x stable side stop, with scale and tilting cam - 2x stable, front support arms - 1x freely movable foot switch - front finger guard Dksln Tiowh Uguefbjl - rear sheet metal slide - EMERGENCY STOP button at the front - operating instructions * Special accessories included: - 1x FASTI replacement blade for model 509-20/4

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Dkelorfx Tnon Tifbsl Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: used, Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket -Handover: in the current condition as viewed -Punch bracket: as shown in the pictures -Manufacturer: CEWE -Type: PA8-150 -Projection: 150 mm -Number: 2x punching unit available -Price: per piece -Dimensions: 235/35/H140 mm Delev Rlzpen Tifbskl -Weight: 3.9 kg/piece

Condition: ready for operation (used), Year of construction: 1997, General Data Measurements width 4500 mm Measurements depth 2900 mm Measurements height 3428 mm Machine weight 14000 kg Main Drive Number of axis 4 Movement X-Axis Movement 630 Dkjln Tifowh A S Sjbsl Y-Axis Movement 600 Z-Axis Movement 650 Additional Equipment Tool Storage: 40 pcs This 4-axis MORI SEIKI SH-50 was manufactured in 1997. A reliable horizontal machining centre, it offers robust construction and precision engineering. Ideal for complex machining tasks, this unit has maintained consistent performance over the years. Consider the opportunity to buy this MORI SEIKI SH-50 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: used, length 710 mm Doln Tifsvmih Esbekl height 580 mm ampere bis 500 Power connection 60% ED: 27,5 kVA Power connection 100 % ED: 21,4 kVA welding current stepless ja/yes voltage 380 V weight of the machine ca. 93 Kg dimensions of the machine ca. 1 x 1 x 2 m Electric welding machine on a rolling shelf with accessories such as hose package, plenty ofelectrodes, protective visor. It is suitable for electrode welding. The device was only ever used in a repair shop 3 times a year, so it was only used very little. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1982, Functionality: fully functional, Giddings and Lewis A110RT Horizontal Boring and milling machine with G&L CNC 8000 control system. serial number 150-1588 Year 1982 Dksln Tjvk D Disifbol Spindle diameter 4" Table size 72"x48" X axis 60" Y axis 70" Z axis (spindle) 36" W axis 28" Equipped with:- Removable Power rotary table 600mm, Davis CH8 facing and contouring head.

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min Djlev Dmnwon Tifbskl motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - EMERGENCY OFF button, bottom right - machine swing feet

Condition: good (used), Gap Bed machine 28” Between centers: 80” Dksljnr Nl Son Tifbsl Swing over bed: 17" Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: used, Year of construction: 2008, Table size 700 x 500 mm X/Y/Z - 600/500/500 mm Spindle speeds 10000rpm Spindle taper ISO 40 No. of stations in tool changer 20 Table load 500 kg Control: Fanuc 0i-MC Dkolewigfrsn Tifbsl Equipped with: 20 pcs tool holders

Condition: good (used), Year of construction: 1960, Hand screw press, mandrel press, screw press, hand screw press, printing press, balance printing press, 2-column press, column screw press -Manufacturer: Ageo, manual column screw press type 28/510N with solid base frame -Printing capacity: max. 28 tons -Stroke: 315mm -Intermediate size: 510 mm -Table size: 400 x 510 mm, groove width 22 mm -Pitch: 48 mm/rev. Dkelnergbvye Tifbsl -Dimensions: Ø 1600 x H2040 mm -Total weight: 1024 kg

Condition: good (used), Year of construction: 1994, turning diameter 410 mm turning length 495 mm control Philips CNC 532 Dkslnov S Iq Ne Tifbel turning dia. over face-slide 220 mm turning speed range 20 - 6000 U/min spindle head A 2 5 " turret (x-stations) 12 spindle bore 42 mm Number of working hours 12760 h tailstock quill taper MT 3 quill stroke 80 mm diameter of quill 55 mm total power requirement 11,3 kW weight of the machine ca. 3 t dimensions of the machine ca. 2, x 2,15 x 1,8 m Very well-preserved CNC lathe from individual part production in special machine construction with 12-way turret and extensive range of accessories = complete equipment. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Giddings and Lewis G50 Horizontal Boring and milling machine with G&L CNC 8000 control system. serial number 450-1190 Year 1989 Spindle diameter 5" Table size 96"x48" Dkjln Tjvkwbujifbsl X axis 96" Y axis 80" Z axis (spindle) 36" W axis 73" Equipped with:- Removable Airlift rotary table 4' x 3', Davis CH26 facing and contouring head. External guarding

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock Dkeln Tjv Da Tgoifbol - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Year of construction: 2004, Condition: excellent (used), Year: 2004 X axis:50″ Y axis:26″ Z axis:25″ Motor Power:40 hp Dkeln Teh Uqkyoifbsl Spindle speed Rpm:7500 RPM Atc: 24 Spindle Taper: CT 40 Table width: 23″ Table length: 52″ Swarf auger Coolant tank 4th axis

Condition: excellent (used), Fries Research & Technology Device name: FRT MicroProf® MPR 1250 The FRT MicroProf® MPR 1250 is a high-precision surface metrology system from the MicroProf® series from Fries Research & Technology GmbH (FRT). These systems are designed for the non-destructive and non-contact analysis of Dkeln Tifewh Swdsbsl surface parameters such as topography, roughness, coating thickness, and more. Features of the FRT MicroProf: Measurement modes: The device operates both as a 2D optical profilometer and as a 3D imaging system. A scanning method or a direct imaging sensor is used. Measurement range: Height range: Up to 3 mm, depending on the sensor used. Lateral resolution: Typically 1–2 µm, depending on the sensor configuration. Technical features: Modular multi-sensor design: Allows the combination of different sensors for different measurement tasks. High resolution: Offers measurements in the sub-nanometer range. Flexibility: Can be used for various applications in the semiconductor industry, microsystems technology, optics, automotive industry, and photovoltaics. Automation: Supports fully automated measurements for high throughput rates. Areas of Application The MicroProf® MPR 1250 is used in various industries, including: Semiconductor industry: For the analysis of wafers and microchips. Microsystems technology (MEMS): For the investigation of microstructures. Optics: For the measurement of surfaces in optical components. Automotive industry: For checking component tolerances. Photovoltaics: For the analysis of solar modules. Weight approx. 500 kg Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 1998, CNC Vertical Machining Center MORI SEIKI SV500-50, Year 1998, Fanuc MSC-518 Control Dkjlewifzlon Tifbel With pallet changer. Table: 1100x600mm BT50 spindle mount, 40-position magazine. Spindle speeds up to 6,000 rpm Travels: X800, Y510, Z510, Rapid traverse 32 m/min Machine without magnetic chipboard. Complete machine documentation available.

Condition: good (used), Gauge block box, gauge blocks, gauge block boxes, parallel gauge block set Djlnek Hdr Ee Tifbskl -Manufacturer: Carl Mahr, gauge block set of parallel gauge blocks, 46 pieces -Final dimensions: 1.0 - 100 mm -Measurement accuracy: Accuracy grade I -Dimensions box: 370/120/H60 mm -Weight: 2.8 kg

Condition: used, Year of construction: 1988, Functionality: fully functional, Giddings and Lewis PC50 Horizontal Boring and milling machine with G&L CNC 8000 control system. serial number 445-1030 Year 1988 Dkoln Tifovk Eg Eobel Spindle diameter 5" Table size 72"x48" X axis 72" Y axis 62" Z axis (spindle) 36" W axis 64" Equipped with:-Airlift rotary table 3'x3', Davis CH16 facing and contouring head.

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet Dsln Tifev Da Tajbskl - original operating instructions

Condition: excellent (used), New 2006 Brother CNC-B00 Control Pallet Change time 3.4 seconds Pallet Size 600 x 425mm X axis 550mm Y axis 400mm Z axis 415mm Delnjrfxr Us Tifbjkl Spindle speed 12000rpm 40 Station ATC BT30

Condition: good (used), Year of construction: 1984, CNC Optical Profile Grinding Machine Doln Tifep R Rm Ijbokl Wasino GLS-130AS 1984

Condition: used, Year of construction: 2007, operating hours: 15,000 h, Functionality: fully functional, USED YOU-JI YV1000 ATC 2-axis CNC VTL - YOM 12/2014 – SERIAL NUMBER 07V10T1566 TABLE Table Diameter 1000 MM Table Speed (2 gears) 2 ~ 850 RPM Max. Table Torque 10000 Nm Dkeln Tisvnclyjfbel CAPACITY Maximum Swing Ø 1150 MM Maximum Turning Diameter Ø 1100 MM Maximum Turning Height 800 MM Maximum Load on Table 4000 KGS TRAVEL X-Axis Travel (Saddle Horizontal) 820 MM Z-Axis Travel (Ram Vertical) 800 MM Vertical Travel of Crossrail 500 MM FEEDRATE X-Axis Rapid Traverse 20 M / MIN Z-Axis Rapid Traverse 20 M / MIN Cutting Feedrate 0.001 ~ 500 MM / REV Manual Feedrate 0 ~ 1260 MM / MIN ATC / TOOLING ATC Capacity 12 Stations Tool Shank Type BT50 MOTORS Main Spindle Motor (30 Mins / Cont.) 30.0 / 37.0 KW X-Axis Servo Motor 3.8 KW Z-Axis Servo Motor 3.8 KW Coolant Pump Motor 0.18 KW TANK CAPACITIES Hydraulic Tank 65 L Coolant Tank 300 L Gearbox Lubrication Tank 50 L Slideway Lubrication Tank 4 L POWER SOURCES Input Power Supply 415V / 50HZ / 3PH Power Capacity 80 KVA DIMENSIONS & WEIGHT Floor Space including swarf conveyor & walk round space 5442 x 5999 MM Machine Weight 16,000 KGS ADDITIONAL FEATURES & OPTIONS  Tooling Package  Transformer  Swarf Conveyor  Air and washdown guns  Operators Platform  3 jaw hydraulic chuck & hard jaws  15000 Hours of Actual Cutting Time

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36,0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 15 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. Dslev Da S Non Tifbjkl range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts - in checked conditions - machine video - ?v=DrOH6oWnvKo Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - EMERGENCY OFF button, bottom right - machine swing feet

Condition: excellent (used), Year of construction: 2014, USED HANKOOK VTC140E – YOM 2014 – Serial Number 44L09842 - TWW Cat 7962 MACHINE CONSTRUCTION & FEATURES • Ram Type Vertical Boring & Turning Machine with C-Axis & Driven Tools. • Heavy-Duty Cast-Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Hardened & Ground Slideways to Provide Increased Stability & Rigidity. • 2 Step Automatic Gear Change. • 24 Position Tool Magazine. INCLUDED FACTORY FITTED MACHINE OPTIONS • Chip Conveyor & Chip Bucket • 30 Bar Through Spindle Coolant System • Measurement System C-Axis Scale • Transformer • Hydraulic 3-Jaw & Manual 4-Jaw Combination Chuck With4 Manual Adjustable Jaw Bodies • Automatic Tool Setting Device TOOLING INCLUDED • DINE Tool-changeable Angular Milling Head with 40 ISO Output • 2 Off Sandvik Capto C6 Turning Toolholders with Two Outputs (V & H) • 1 Off Sandvik Capto C6 Axial Turning Head • 7 OFF BT50 Driven Toolholders • 1 Off Hankook TA12B4121015043 • 1 OFF Hankook TA12B412015142 • 1 Off Hankook TA12410000161 • 2 OFF Hankook TA12417010160 CAPACITY Maximum Turning Diameter - Ø 1,600 mm Maximum Turning Height - 1,400 mm Maximum Torque - 17,885 Nm Maximum Cutting Force - 3,000 kgf Maximum Workpiece Weight - 8,000 kg TABLE Table Diameter - Ø 1,400 mm Table Speed - 0.9 ~ 360 RPM Table Speed Range - Automatic 2 Step TABLE C-AXIS Dkolnouu Rz So Tifbjl Minimum Index Angle - 0.001° C-Axis Cutting Feedrate - 0 ~ 1,200 Deg / Min Max. C-Axis Speed - 3.333 RPM RAM HEAD Tool Size - 32 mm² Spindle Taper - ISO 7/24 #50 Ram Cross Section - 220 x 220 mm MILLING SPINDLE Milling Spindle Speed - 30 ~ 3,000 RPM Max. Milling Spindle Torque - 235 Nm TRAVEL & FEEDRATE X-Axis Travel (Saddle Horizontal) - 1,600 mm Z-Axis Travel (Ram Vertical) - 900 mm Maximum X / Z-Axis Cutting Feedrate - 7,500 mm / Min X / Z-Axis Rapid Feedrate - 7,500 mm / Min ATC Type of Tool Holder - MAS BT 50 Tool Magazine Capacity - 24 (12T & 12M) Max. Tool Weight - 50.0 KGS MOTOR Table Motor (Cont. / 30 Min) - AC 37.0 / 45.0 kW Milling Spindle Motor Power - 15.0 / 18.5 kW X / Z-Axis Servo Motor - AC 7.0 kW C-Axis Motor - 7.0 kW POWER SOURCE Input Power Supply - 415V / 50HZ / 3PH Power Capacity - 80 KVA DIMENSIONS & WEIGHT Height - 5,535 mm External Width (With Chip Conveyor) - 6,760 mm External Depth - 4,565 mm Weight - 25,800 kg STANDARD SUPPLIED MACHINE FEATURES • Fanuc 32iA Control System • Through Tool Coolant • Table, Servo Drives & Motors • Through Spindle Coolant • 4 Jaw Independent Manual Chuck • Splash Guard & Safety Guard Rail • Automatic Tool Change System • X-Axis Slideway Protect Steel Cover • Lubrication Oil Cooler • Work Light • Hydraulic Power Unit • Levelling Blocks • Patrol Lamp (Red, Yellow & Green) • Automatic Guideway Lubrication System • NC Power Off • Coolant System & Wash Gun • Chip Pan • Electrical & Mechanical Manuals

Condition: used, Year of construction: 1998, dimensions of saw-blade 350 x Ø 40 x 3 mm cutting range 120 mm capacity 90 degrees: square 100 x 100 mm capacity 90 degrees: flat 170 x 100 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 95 x 95 mm capacity 45 degrees: flat 120 x 100 mm capacity 60 degrees: round RE 100 mm capacity 60 degrees: square RE 85 x 85 mm capacity 60 degrees: flat RE 85 x 100 mm work height max. 900 mm saw blade turning speeds 17 / 34 U/min compressed air 6.0 - 8.0 bar total power requirement 1.4 / 1.9 kW weight 340 kg range L-W-H 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device - Infinitely adjustable saw blade feed - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Convenient saw blade change - High productivity with the smallest footprint (less than 1 m²) - Machine base - Operation manual (PDF) Machine with factory new spare parts (installed): Dkjlnou Sa U Dj Tifbsl 1x cylinder Pneu/HydrDoppelw.D80HUB190 for saw blade lowering 1x gas spring Hub100 D23 F=800N for safety hood