Condition: used, capacity 90 degrees: round 260 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 300 x 260 mm dimensions of saw-band 4200 x 34 x 1,1 mm sawing motor 4 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale! Colinevy Imyo Rd Esgt

Condition: excellent (used), Year of construction: 2001, GEKA R 8 three-roll bending machine, 2040 x 1.0 mm, used - Three-roll, asymmetrically mounted, made of high-strength steel - Side stand with solid welded construction - Quick rear roll adjustment - Crowned rollers to compensate for deflection - Bending length 2040 mm - Weight approx. 300 kg - Year of manufacture 2001 Cgolin Rdswhf T Sj Eet Location: arriving at warehouse 54634 Bitburg - Available at short notice

Year of construction: 2007, Condition: ready for operation (used), Additional Equipment Resonator: 6 kW Co2 Incl LiftMaster This 3-axis TRUMPF TruLaser 5030 classic 6,0kW + LiftMaster was manufactured in 2007. Ideal for precise CO2 laser cutting, this machine offers robust performance and reliability. Consider the opportunity to buy this TRUMPF TruLaser 5030 classic co2 laser cutting machine. Contact us for more information. Cjlin Rjwg Ig Eod Ejgt Application Types Cutting

Condition: good (used), Year of construction: 1996, CNC turning center with gantry loader . Cslin Rdou Eug Is Esgt TRAUB Type:TNC65 DG Year 1996 Control TRAUB TX8F Without lathe chuck With many accessories .

Year of construction: 2007, Condition: used, Max. machining length: 2,600 mm Y-axis travel: 315 mm Z-axis travel: 230 mm Milling spindle speed infinitely adjustable between 2,800 and 12,000 rpm Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping X and Y-axis CNC controlled, Z-axis continuously lowerable by motor 4 pneumatic material clamps Manual tool change Minimum quantity spray device USB port Cgjlinslp Uz As Rd Eot operation manual Accessories as per photo

Condition: used, Year of construction: 1972, turning length 2000 mm turning speeds 1400 U/min centre height 315 mm turning diameter 630 mm Cgslouap Uajin Rd Ejt Including accessories (see pictures). The machine is in very good condition and has been well maintained. Only the rapid traverse should be checked.

Condition: new, Circular working area 360 mm Cslin Rowhli Hsd Eegt Quadrant working area 360 x 360 mm Bundle working area W x H 180 - 280 x 50 - 160 mm Cutting speed 20 - 100 m/min (infinitely variable) Saw blade dimensions 4,420 mm x 34 mm x 1.1 mm Saw blade tensioning: hydraulic Multiple feed 500 mm Drive power 3.7 kW Machine size L x W 2,500 x 2,200 mm Machine weight 2,300 kg Standard equipment - Hydraulically controlled full-stroke double clamping system. - Driven by an IE3 motor with inverter (PMSM, Euate IE4) - User-friendly PC control with touchscreen - Feed rate display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions - Floating pendulum vise - Two-part front vise - Continuously variable speed control via inverter - Hydraulic blade tensioning - Roller bearing with hydraulically controlled carbide blade guide system - Automatic working height control via quick start sensor - Preset cut counter with shutdown - Nesting device for bundle cutting (downholder) - Power-driven blade cleaning brush - Saw blade monitoring for standstill and blade breakage - Flushing hose for machine cleaning - Work light - 2 m long roller table - One M42 bi-metal saw blade - One set of tools and one Toolbox - Full Cover

Condition: excellent (used), Year of construction: 1995, Schroeder HS 2000/1.0 Manual Guillotine Shear Celiowhf Nten Rd Ejgt Specifications: Manufacturer: Schröder Model: HS 2000/1.0 Year of Manufacture: 1995 Working Length: 2000 mm Cutting Thickness: 1.25 mm Collecting Tray Rear Paralleling Device via Handwheel Location: Arrives at Warehouse 54634 Bitburg - Available at Short Notice -

Condition: new, ELGO desk, never assembled, new Cgslin Rdowgwkme Ejt

Condition: good (used), Year of construction: 1998, Semi-automatic circular sawing machine Make KASTO Type:V350 U Year 1998 with mitre cut, roller conveyor and stop Saw blade dm.350mm Pneumatic vice and saw feed Stepless. Machine little used in good condition. Cgolinefym Ewj Rd Ejt

Year of construction: 1995, Condition: used, Max. sawing length: 6,000 mm Cgjlev Ip T Doin Rd Eot Max. saw blade diameter: 500 mm Automatic positioning via diamond control of length and angles Angles can be swiveled inwards and outwards (20-135°) Moving roller conveyor Soundproof cabin Minimum quantity spray device chip conveyor belt Weight: approx. 2,800 kg

Year of construction: 1990, Condition: excellent (used), machine/vehicle number: VH-7360, a used well-preserved CNC bed type milling machine with HEIDENHAIN control, HURON-head, hydraulic Werkzeugklemmumg,. Coolant system, central lubrication system, lighting, TFT - monitor new. Traverse path x/Y / Z 1600/ 800 / 650 mm Spindle retainer for SK 50 Spindelderhzahl 60-1800U/min Working feed 10-3000 mm / min Rapid traverse 10 m / min Table size 1800x610mm Machine weight 9500 kg Cgslisdzy Uyen Rd Est Table load: 3000 kg

Condition: excellent (used), Year of construction: 1995, Schroeder Manual Bending Machine with Segments Specifications: Manufacturer: Schroeder Model: Ak 2000/1.0 Year of Manufacture: 1995 Working Length: 2000 mm Cgolinjwhf Eho Rd Ejt Bending Thickness: 1.0 mm With Segments Mobile Location: Arrives at warehouse in 54634 Bitburg - Available at short notice -

Year of construction: 2009, Condition: used, Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Control via Siemens S7 panel Operating instructions etc. available, further technical data on request Machine was in operation until dismantling Further technical data on request or see photos Colin Rdoqzmnus Ejgt

Year of construction: 1989, Condition: used, A used CNC- lathe in good condition with NUM- CNC control Chip conveyor, coolant unit, hydraulic power chuck, jaws and tool holders turning diameter over bed 360mm Turning diameter over support 260mm Max. turning length 625mm Spindle speed 3500 rpm spindle passage 42mm Tech. Data and dimensions: Errors excepted. Cslioflhcmon Rd Eogt Further tech. data see pdf.- document

Year of construction: 1994, Condition: good (used), machine/vehicle number: 24.105, A used, well-preserved hydraulic press brake HATASTAR equipped with: - CYBELEC DNC 70 control - Controlled axes Y1;Y2;X;R - Hydraulic upper tool clamping - Hydraulic crowning - FIESSLER AKAS safety system - Tools - Press book - Documentation bending length 4600mm Stands width 4100mm Colin Rdefthzkj Eogt Press force 1350kN stroke 220mm Rapid traverse 140mm/sec working speed 10mm/sec Retraction speed 100mm/sec Further tech. data see pdf.- document Tech. Data and dimensions: Errors excepted.

Year of construction: 2019, Condition: new, We offer press brake tooling and stamping tools machines for TRUMPF, AMADA, BYSTRONIC, LVD, SALVAGNINI, DURMA, ERMAKSAN, MVD, HACO. Cgjlin Rdod H T Tfs Ejt Standard and special tools Send us your wishes and we offer matching tool.

Condition: good (used), machine/vehicle number: 550C08, A used punching PEDDINGHAUS with large throat and large plate with attacks Cutting capacity 45 tonnes Stroke rate 40 strokes/min Colined Hxrte Rd Esgt Projection 762mm Arbeitshöte 1110mm

Year of construction: 2004, Condition: good (used), A used good condition double miter cold circular saw machine from KASTO Model: "KASTOdisc A10". - Fully automatic operation - Single cut - Hydrasulic saw bars - Central lubrication for saw guides - Coolant device - documentation Celekfvhksin Rd Eogt Saw blade diameter 350mm Cutting range round 90°/ 45° 100/ 100mm square 90/ 45° 100x100/ 100x100mm Rectangle 90°/ 45° 170x100/ 130x100 Shortest remaining piece length with single cut at 90° 30mm Shortest remaining piece length in automatic mode at 90° 260mm Working height 950mm Dimensions WxDxH 1530x1348x1890 mm Weight 980kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Year of construction: 2011, Condition: new, manual swivelling bending machine with a 100mm high goose foot and segmented upper and lower tools Celin Ro N N D Esd Eogt bending length 1020mm bending capacity 2,0mm bending angle 0-150 weight 370kg

Year of construction: 1966, Condition: good (used), A used eccentric press Weingarten in good condition with pneumatic engagement, piece counter, documentation, press test book, spare parts 2 pallets pressure 1500 kN (150 tons) Cgjlieir I Slen Rd Ejt stroke 60 mm ram small / large stroke 10 - 140 mm throat 550 mm Cylindrical holder 30 mm Table W x D 1200 x 1000 mm dimensions W x D x H 150 x 270 x 290 cm Weight 13.500 kg Tech. Data and dimensions: Errors excepted.

Year of construction: 1997, Condition: excellent (used), A used very good condition cold circular saw from EISELE equipped with 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant device and documentation. Cgoljkfp D Tsin Rd Eot Speed: 17/ 34 rpm Cutting range: Round 90°/ 45° r. l./ 30° r. 130/ 130/ 105mm. square 90°/ 45° r. l./ 30° r. 120x120/ 100x100/ 90x90mm rectangle 90°/ 45° r. li/ 30° r. 200x100/ 140x100/ 100/100mm Pneumatic connection 7 bar working height 900mm Machine dimensions WxDxH 865x1332x2175mm Weight 460kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Year of construction: 2005, Condition: excellent (used), pneumatic punching machine Csleff Apwsin Rd Eogt

Year of construction: 1980, Condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Celinjgyy I Ae Rd Ejgt Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Year of construction: 2005, Condition: excellent (used), machine/vehicle number: 47885/05, pneumatic punching of window profiles Stroke 20 mm Cgolin Roff Apijd Eet