Condition: ready for operation (used), Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 27498, feed length X-axis: 230 mm, feed length Y-axis: 170 mm, feed length Z-axis: 400 mm, gear diameter: 130 mm, spindle speed (max.): 1,200 rpm, TECHNICAL DETAILS Gear diameter: max. 130 mm Gear width: 400 mm Module: 0.5 - 3 Clamping length: max. 1,160 mm Work spindle swivel angle: ± 45° Tool change swivel angle: 90° Workpiece Largest module (in steel with approximately 600 N/mm²): 4 Largest swing diameter (not millable): 480 Smallest number of millable teeth: 3 Tool Largest hob diameter: 130 mm Largest cutter length (depending on cutter arbor diameter): 220 mm Cutter arbor diameter: 16 / 22 / 27 / 32 mm Cutter arbor taper: ISO Workpiece spindle – WS External turning range: 160 mm Cgob Eylswc Tduekuot Bore: 63 mm Tailstock – RT Motorized travel (W-axis): 750 mm Quill stroke (hydraulic): 90 mm Axis travels X-travel: 230 mm Y-travel: 170 mm Z-travel: 400 mm Spindle Cutter speed (infinitely variable): 300 – 1,200 rpm Workpiece spindle speed range: 1 – 125 rpm Control system Control system: Bosch CC 220 MACHINE DETAILS Total power requirement: 52 kW Machine weight: approx. 7.5 t Machine dimensions: approx. 4,800 × 3,800 × 2,500 mm Space required: 7.3 x 5.3 x 4.3 m Operating voltage: 380 V Control voltage: 220 V V Frequency: 50 Hz Machine power consumption: approx. 56 kVA EQUIPMENT - Bosch CC 220 CNC control - Continuously variable cutter speed control - Large travel range in all axes - High flexibility thanks to a wide range of modules

Condition: good (used), Year of construction: 1965, Functionality: fully functional, grinding wheel diameter: 350 mm, rotational speed (max.): 32 rpm, thread length: 500 mm, workpiece diameter (max.): 250 mm, TECHNICAL DETAILS Workpiece diameter: 200 / 250 mm Thread length: 500 mm Thread pitch: 6 - 72 mm Grinding diameter: min. 1 mm Center distance: 800 mm Cob Eylewcrvijkujgt Module: max. 8 Helix angle: 40° Relief grinding: 0.015 - 4 mm Spindle and grinding wheel Workpiece spindle speeds: 0.19 - 32 rpm Grinding wheel diameter: 275 - 350 mm MACHINE DETAILS Total power requirement: 11 kW Machine weight: approx. 3.6 t Space required: approx. 3.8 x 2.3 x 1.0 m EQUIPMENT - 2 dressing devices - Various accessories

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Cgsbjwcrrde Eylkuet X-axis travel: 610 mm Y-axis travel: 305 mm Z-axis travel: 520 mm Table Table size: 762 x 363 mm Max. table load: 249 kg Spindle Spindle speed: max. 8,000 rpm Spindle taper: 40 Spindle motor power: 4.1 kW Tool changer Number of tools in magazine: 16 MACHINE DETAILS Machine weight: approx. 2.510 t Frequency: 50 Hz Technologies: Drilling/tapping, form milling (3D), milling, HSC milling

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 100 mm, feed length Z-axis: 300 mm, spindle speed (max.): 1,500 rpm, controller model: IBH CNC, TECHNICAL DETAILS Axial slide travel Z-axis: 300 mm Radial slide travel X-axis: 140 mm Cutter travel Y-axis: 100 mm Tailstock travel W-axis: 420 mm Workpiece data Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Max. workpiece length: 400 mm Milling parameters Cutter diameter: 40 - 102 mm Maximum cutter length: 230 mm Milling arbor diameter (standard): 16 - 32 mm Milling coordinates Z-axis: 100 - 400 mm X-axis: 100 - 150 mm Y-axis (milling spindle end face): 50 - 230 mm W-axis (tailstock end face): 165 - 585 mm Speeds Cutter speed B-axis: 0 – 1,500 rpm Workpiece speed C-axis: 0 – 350 rpm Feed rates X-axis: 3,500 mm/min Z-axis: 3,500 mm/min Y-axis: 4,000 mm/min W-axis: 5,500 mm/min V-axis (gantry loader): 80,000 mm/min Cgob Eyjwcrnxolkust Swivel range Shift milling head A-axis left/right: 50° / 60° MACHINE DETAILS Weight: 6 t EQUIPMENT - CNC control IBH - Loading device - Various accessories

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, 2 machines in a double package = 1 functional + 1 spare parts rack (identical) TECHNICAL DETAILS Control: GE FANUC 15T Tool positions: 12, all driven Spindle positioning: in 2.5-degree increments Chuck: 3-jaw hydraulic chuck Automatic tool measurement: available Chip conveyor: available Cooling system: available Maintenance: regular Csbewcz U Is Eylkuogt

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 304-1196, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, table width: 900 mm, table length: 900 mm, tank capacity: 1,200 l, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 600 mm Cgsb Eylkjwf Hgnoujt Y-axis travel: 500 mm Z-axis travel: 400 mm Table and container Workpiece clamping table: 900 × 900 mm Container size: 950 × 950 mm Work container filling height: 450 mm Distance from table to electrode holder: 215 - 615 mm Loads Max. electrode weight: 50 kg Max. workpiece weight: 2,000 kg Dielectric tank capacity: 1,200 l Tool changer: 6 tools MACHINE DETAILS Dimensions (W × D × H): 2,070 × 2,850 × 2,980 mm Machine weight: 5,500 kg Electrical Specifications EDM generator: 60/120 A EQUIPMENT - Andronic 400 control system - Menu-driven user interface - AAC-3AM process control - Integrated state-of-the-art technology - Hand control panel with handwheel - 3 cartridge filters - Integrated cooling unit - CO₂ extinguishing system - New gears, bearings, and ball screw - C-axis with positioning, rotation, and EDM functions, Heidenhain RON275 direct measuring system - New container drive with chain tensioner - Silver metallic paint finish - Hirschmann heavy-duty chuck H8.11.15/3 - Laser measurement in all axes - Services available: transport, training, commissioning

Condition: good (used), Year of construction: 2013, operating hours: 3,901 h, Functionality: fully functional, machine/vehicle number: 169527, turning diameter: 710 mm, travel distance X-axis: 690 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 2,045 mm, rotational speed (max.): 10,000 rpm, The machine can be shipped free of charge for €2,500. TECHNICAL DETAILS X-axis travel: 690 mm Y-axis travel: 230 mm Z-axis travel: 2,045 mm B-axis swivel range: up to 225°, 0.001° interpolation Turning parameters Cjb Eylowff R Sokujgt Turning diameter: 710 mm Turning length: 2,000 mm Torque: 65 Nm Bar capacity: 110 mm Spindle bore: 110 mm Spindle nose: HSK-A63 Spindle speed: 38 - 2,800 rpm Speed: 50 - 10,000 rpm Counter spindle Counter spindle motor power: 22,000 W Max. counter spindle speed: 3,800 rpm Maximum counter spindle torque: 412 Nm Counter spindle bore: 80 mm Spindle drive Spindle motor power: 30,000 W Tool data Number of tool magazine slots: 80 Tool length: 400 mm MACHINE DETAILS Overall length: 7,930 mm Overall width: 2,998 mm Overall height: 3,157 mm Total weight: 16,000 kg EQUIPMENT - NC tailstock - IFS exhaust system - Door automation - Continuously adjustable speed and counter spindle speed - NC steady rest SMW SLU-Z 3.2 (clamping range Ø50–200) - In-process measurement with Renishaw possible - Documentation/Manual

Condition: ready for operation (used), Year of construction: 2012, operating hours: 21,109 h, Functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 80, Includes Indunorm UL300 pallet changer (3 pallet sizes) Submission of bid obligates the buyer to pick up the item by May 30, 2025. Cgjb Eylowgcn Dekuot TECHNICAL DETAILS X-axis travel: 550 mm Y-axis travel: 1,000 mm Z-axis travel: 500 mm Axes A-axis: +300° / -120° C-axis: 360° C-axis resolution: 0.0001° Clamping table Table dimensions: 500 mm diameter Table dimensions with zero-point system: 356 mm x 356 mm Max. table load: 350 kg T-slots: 18H8 x 4 Workpiece size: 650 x 500 mm Spindle Spindle speed range: 50 – 20,000 rpm Spindle power: 18.5 kW (S6) Spindle torque: 95 Nm (S6) Tool holder: HSK63 Control Control manufacturer: Fanuc Automatic tool changer Tool holder: HSK63 Number of tool positions: 80 Indunorm pallet changer Pallet size 1 for automation: 6 pcs, 398 mm x 398 mm Preset pallet for Erowa IST: 1 pc, 398 mm x 398 mm Pallet size 2 for automation: 15 pcs, Erowa ITS115 mm Pallet size 3 for automation: 32 pcs, Erowa ITS50 mm Transfer weight including pallet: 300 kg Rapid traverse Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A/C-axis: 18,000°/min (equivalent to 50 rpm) Feed X-axis feed: 32 m/min Y-axis feed: 40 m/min Z-axis feed: 40 m/min A-/C-axis feed: 12,000°/min (equivalent to 33.3 rpm at max. 500 kg) A-/C-axis feed: 18,000°/min (equivalent to 50 rpm) MACHINE DETAILS Width: 3,200 mm Depth: 3,550 mm Height: 2,900 mm Machine weight: 16,000 kg Operating hours On-time: 41,624 h Operating time: 21,877 h Machining time: 16,829 h Spindle hours: 21,109 h EQUIPMENT - Chip conveyor - Paper belt filter - Bed flushing system - Electric handwheel - 6 Parotec pallets, 398 mm x 398 mm - 1 Parotec pre-pallet for Erowa ITS, 398 mm x 398 mm - Extensive control options for Fanuc - Machine documentation - Marposs infrared sensor - Preparation for oil mist extraction - Blum tool measurement with laser - Work area flushing system - Manual flushing gun - External coolant with 3 nozzles, 7 bar - Internal coolant, 15 bar - Coolant temperature control - Internal and external air supply Disassembly and loading can be arranged through a service provider.

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, pressing force: 152 t, working length: 3,100 mm, Valid until 10/2025 TECHNICAL DETAILS Press force: max. 1,500 kN Working length: max. 3,100 mm Diameter: 690 mm Upper beam stroke: max. 300 mm Speeds Upper beam drop speed: 100 mm/s Upper beam pressing speed: 10 mm/s Upper beam return speed: 100 mm/s Backgauge Backgauge range: 600 mm Number of backgauge axes: 6 Compressed air Compressed air consumption for sheet thickness measurement: 0.0002 m³/min at 6 bar MACHINE DETAILS Length: 4,360 mm Width: 2,120 mm Height: 2,885 mm Weight: 12,800 kg Mains voltage: 3 x 400V/50/60Hz/N/PE Slow-blow fuse: 63 A Power consumption: 22 kW Cgjb Eewffkxsylkuot EQUIPMENT - Hydraulic tool clamping (top/bottom) - CNC-controlled bending aid - Safety light curtain - Sheet thickness measurement

Condition: good (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: PT25SY0113, turning length: 350 mm, turning diameter over cross slide: 620 mm, turning diameter: 390 mm, spindle speed (max.): 4,000 rpm, bar passage: 76 mm, TECHNICAL DETAILS Control: Fanuc Series 18i-TB Number of axes: 8 Machining area Swing over bed: 800 mm Swing over carriage: 620 mm Recommended turning diameter: 255 mm Turret turning diameter: 390 mm Lower turret turning diameter: 300 mm Workpiece length: 350 mm Bar capacity: 76 mm Turret Tool stations per turret: 12 Cob Eylkowc Sicsusgt Spindle Max. spindle speed: 4,000 rpm Travel paths X1 axis: 255 mm X2 axis: 190 mm Z1 axis: 800 mm Z2 axis: 900 mm Y axis: 120 mm B axis: 810 mm C1 and C2 axes: 360° MACHINE DETAILS Power consumption: 87.06 kVA Weight: 11.7 t EQUIPMENT - 2 turrets with 12 tool stations each - C-axes on both spindles - Y-axis for milling operations - Fanuc control with 8-axis capacity

Condition: refurbished (used), Year of construction: 2012, operating hours: 38,984 h, Functionality: fully functional, machine/vehicle number: 06860001401, spindle speed (max.): 5,000 rpm, turning diameter: 320 mm, TECHNICAL DETAILS Max. swing diameter: Ø 320 mm Spindle speed: max. 5,000 rpm MACHINE DETAILS On-time: 60,009 h Spindle hours: 38,984 h Machine weight: 6,000 kg Connected load: 40 kVA EQUIPMENT - Automatic workpiece feeder - Chip conveyor - High-pressure cooling system with paper filter Further technical details according to the manufacturer - without guarantee X-stroke: 650 mm Y-stroke: +90 mm / -65 mm Z-stroke: 300 mm Max. workpiece diameter: Ø 220 mm Max. workpiece height: max. 160 mm Cgjbjwcrgno Eylkuot Max. chuck diameter: Ø 260 mm Tool turret: 12 x VDI 40 Speed: 4,000 rpm

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 1602, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS No information available Further information according to the manufacturer - without guarantee Cgeb Eylswhdr Tskuet X-axis: 700 mm Y-axis: 1,000 mm Z-axis: 700 mm MPe (X-axis): from 1.3 + L / 300 µm MPEp (Y-axis): from 1.3 µm Mounting holes: M10 in 200x200 grid

Condition: used, Year of construction: 2016, swing diameter 560 mm turning length 1.400 mm control C200-4D Siemens 840 D spindle head 8 DIN 55026/55021 ISO 7027/1 bar capacity 90 mm spindle diameter in front bearing 140 mm turning speed range - spindle ~ 3.500 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C-Axis 0,001 ° spindle head 6 DIN 55026/55021 ISO 702/1 bar capacity 65 mm spindle diameter in front bearing 110 mm turning speed range - spindle ~ 5.000 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C - Axis 0,001 ° Number of Turrets 3 turret (x-stations) 3 x 12 pos number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 30 x 55 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -y axis 190 mm travel -z axis 1.400 mm b - axis 360 ° Holding Torque B: 3.000 Nm rapid traverse X/Y/Z: 20 / 10 / 40 m/min rapid traverse B: 360 °/sec feed power X/Z: 9.000 N feed power Y: 16.000 N number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 9,4 kW Torque 19 Nm travel -x axis 140 mm travel -z axis 1.375 mm rapid traverse X-axis 22,5 m/min rapid traverse Z-axis 45 m/min feed power X/Z: 9.000 N number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 30 x 55 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -y axis 190 mm travel -z axis 1.400 mm b - axis 360 ° Holding Torque B: 3.000 Nm rapid traverse X/Y/Z: 20 / 10 / 40 m/min rapid traverse B: 360 °/sec Ceb Eylkswb Hx Asuogt feed power X/Z: 9.000 N feed power Y: 16.000 N tool taper 30 x 55 mm DIN 69880 total power requirement 108 kVA weight of the machine ca. 14 t dimensions of the machine ca. 8,0 x 2,6 x 2,5 m CNC Turning- and Milling Center INDEX G 250 - INDEX WHD 200/14 Workpiece Handling System Chuck parts max. 200 mm in diameter Length up to approx. 200 mm Shaft parts max. 80 mm in diameter Length up to approx. 400 mm Workpiece weight max. 2x 10 kg Max. workpiece projection: 150 mm (at 10 kg) Two-jaw double gripper for blanks and finished parts Longitudinal gripper travel Z: max. 5,200 mm Gripping stroke Y: max. 300 mm Electric rotation axis 23 degrees Electric gripper rotation angle horizontal axis 4x 90 degrees Double gripper travel per gripper jaw 20 mm - Schnaithmann Pallet Handling System (Type BS) 20x workpiece carriers 240 x 200 mm

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,517 h, Functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 48, Bidding obligates the buyer to pick up the vehicle by May 30, 2025. Geometry report available! Cgjb Eylowgbx Uekuot TECHNICAL DETAILS X-axis travel: 1,300 mm Y-axis travel: 800 mm Z-axis travel: 650 mm Control manufacturer: Fanuc Feed rate: 24,000 mm/min Clamping table Table dimensions: 1,550 x 800 mm Spindle-to-table distance: 250 - 900 mm Table load: max. 2.5 t Workpiece size: 1,550 x 800 x 550 mm Spindle Spindle speed range: 50 - 20,000 rpm Spindle power: 18.5 kW (S6) Torque: 95 Nm (S6) Tool holder: HSK63 Number of tool positions: 48 Coolant system External coolant pressure: 7 bar Internal coolant pressure: 40 bar Accuracy Positioning accuracy: ± 0.0025 mm Repeatability: ± 0.002 mm MACHINE DETAILS Width: 3,850 mm Depth: 4,090 mm Height: 3,560 mm Machine weight: 16,000 kg On-time: 38,291 h Machining time: 20,068 h Program on-time: 24,725 h Spindle on-time: 24,517 h EQUIPMENT - Electric handwheel - Chip conveyor - Paper belt filter - Internal & external air supply - Marposs infrared sensor - Preparation for oil mist extraction - Blum tool measurement with laser - Work area flushing - Manual flushing gun - Coolant temperature control - Machine documentation - Geometry report A separate tool changer can be used for dismantling and loading. service providers are provided.

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand FANUC Model 30i-B Main Drive Cgsb Esv Dni Aeylkuet Number of axis 12 Movement X-Axis Movement 50 mm Y-Axis Movement 50 mm Z-Axis Movement 100 mm Turret Number of turrets 1 Additional Equipment Chip Conveyor, Hinged Type High Pressure Device: 0.25/5/12 MPa Oil Mist Collector for Oil/Emulsion Chiller System for Machine & High Pressure Device Cooling This 12-axis DMG MORI Multisprint 36 multi-spindle turning machine was manufactured in 2019. Ideal for complex turning operations, it offers precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DMG MORI Multisprint 36 machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2008, operating hours: 60,000 h, Functionality: fully functional, turning length: 800 mm, turning diameter: 350 mm, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 100 mm, controller model: FANUC 180is-TB, TECHNICAL DETAILS Control: FANUC 180is-TB Turret Number of turrets: 2 Turret heads: 2 × 15 stations Y-axis: 100 mm (± 50 mm) Machining capacity Max. turning diameter: 350 mm Max. turning length: 800 mm (200 mm for flange machining) Cob Eylkewc Shfsuegt Spindle and bar machining Chuck size left spindle: 250 mm Chuck size right spindle: 200 mm Bar capacity left spindle: Ø 76.2 mm Bar capacity right spindle: Ø 50.8 mm Spindle speeds Left spindle speed: 4,000 rpm Right spindle speed: 4,000 rpm Rotary tool speed: 4,000 rpm Travel speeds Upper Turret X1 / Y / Z1: 24 / 12 / 30 m/min Lower turret X2 / Z2: 24 / 30 m/min Motor power Left spindle: 22 kW (30 min), 15 kW (continuous) Right spindle: 18.5 kW (30 min), 11 kW (continuous) Rotary tool: 5.5 kW (S3 25%), 3.7 kW (continuous) MACHINE DETAILS Machine height: 2,250 mm Space requirement: 4,745 × 2,932 mm Weight: 8,500 kg Feed time: 14,850 h On-time: 60,000 h EQUIPMENT - Comprehensive tool package - Tool Eye (automatic tool measurement) - Internal coolant supply (IKZ) with 24 bar pressure and Filter system - Chip conveyor - Manuals

Condition: new, Year of construction: 2025, Functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 100 mm Workpiece Weight : max. 170 kg Ceb Eylowhi Srekusgt Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 1800027, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Chip conveyor: present Control system: Siemens 840D Coolant and lubricant processing system Manufacturer: Knoll Type: AE1058 Cgob Eylewhdqcjkuot Year of construction: 2004

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 2320005, travel distance X-axis: 550 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 375 mm, number of slots in tool magazine: 40, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Cob Eylewhdp Eokujgt Control: Siemens 840 DSL X-axis travel: 550 mm Y-axis travel: 450 mm Z-axis travel: 375 mm Tool changer Capacity: 40-station Tool holder: HSK63 Chip disposal Chip conveyor: Knoll 440S-1/250 Year of manufacture: 2017 Cooling system Coolant and lubricant treatment system: Knoll Further information according to the manufacturer - without guarantee Swivel table / counter bearing with face gearing: Swivel time 0 - 180° approx. 3.0 s Prepared for A and U axes: yes Support for X / Y clamping blocks: yes Speed range A and U axes: 1 - 50 rpm Speed range C-axis: 7-station 4-axis Speed range: 10 - 10,000 rpm (1 - 17,500 rpm) Ramp-up time t₀ - 4: 0.45 s Drive system: Ball screw Rapid traverse X / Y / Z: 75 / 75 / 75 m/min Tool change system: Pick-up Max. tool diameter: 70 mm / 160 mm (adjacent position free) Max. tool length: 275 mm Max. tool weight: 7.5 kg Transport dimensions L x W x H: 2.75 x 2.85 x 2.65 m Max. table load: 1,000 kg Machine weight: 8.3 t Total connected load: approx. 64 kVA Control system: Siemens SINUMERIK 840 D

Condition: ready for operation (used), Year of construction: 1979, Functionality: fully functional, machine/vehicle number: 2287, pressing force: 16 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Machine was rebuilt in 2017! TECHNICAL DETAILS Pressure: 160 kN Motor power: 3 kW Safety clearance: 140 mm Overtravel: 11 mm Overtravel time: 70 ms Further information according to the manufacturer - without guarantee Stroke: approx. 250 mm Thrust: approx. 270 mm Csbswhdple Eylkusgt Installation height: approx. 400 mm Table surface: approx. 800 x 500 mm Bore diameter: approx. 50 mm Ram surface: approx. 220 x 360 mm Weight: approx. 2.3 t Dimensions: approx. 1.8 x 1.5 x 2.7 m

Condition: ready for operation (used), Year of construction: 1983, Functionality: fully functional, machine/vehicle number: 3182, pressing force: 200 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Machine rebuilt in 2017! TECHNICAL DETAILS Max. pressure force: 200 t Year of manufacture: 1983 Year of rebuild: 2017 Motor power: 30 kW Safety clearance: 180 mm Overtravel: 18 mm Overtravel time: 90 ms Ceb Eylewhdn Ijkujgt Material feed Roll feed: 2 rolls Manufacturer: Eckardt

Condition: ready for operation (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 1127626, table width: 400 mm, table length: 600 mm, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Table dimensions: 400 x 600 mm EQUIPMENT - Chip conveyor - Tool changer Further information according to the manufacturer - without guarantee X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Distance from spindle to table: 546 mm Spindle speed: 10,000 rpm Tool taper: BT 30 T-slot spacing: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Cgeb Eyjwhdnnjlkujt Number of slots: 3 Table load: max. 113 kg Tool changer: Double gripper Tool diameter: 51 mm Tool length: 178 mm Tool weight: 2.5 kg Tool slots: 20+1 Machine dimensions: approx. 2.6 x 1.7 x 2.6 m Transport dimensions: 2.5 x 2.0 x 2.5 m Weight: approx. 2.4 t

Condition: ready for operation (used), Year of construction: 1978, Functionality: fully functional, machine/vehicle number: 3073, pressing force: 200 t, ram stroke: 180 mm, Machine recovered from the insolvency of an automotive supplier - machines are still in operation! Rebuilt in 2008! TECHNICAL DETAILS Press force: 200 t Max. stroke length: 180 mm Control: Two-hand operation Cgeb Eyswhdm Delkust Further information according to the manufacturer - without guarantee Front column clearance: 420 mm Side column clearance: 220 mm Table width: 830 mm Table depth: 530 mm Machine dimensions: 1.3 x 1.5 x 2.7 m

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 1140165, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Control: Haas Spindle mount: CT 40 EQUIPMENT - Tool changer Cgeb Eyowhdk Nelkust - Chip conveyor - Swivel axis Further information according to manufacturer - without guarantee Travel paths X / Y / Z: 711 x 406 x 394 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Table dimensions: 864 x 381 mm T-slot spacing: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Tool changer: Double gripper Tool diameter: 64 mm Tool length: 178 mm Tool weight: 5.4 kg Tool slots: 18+1 Machine dimensions: approx. 2.8 x 2.2 x 2.6 m Transport dimensions: approx. 2.6 x 2.3 x 2.5 Transport weight: approx. 2.5 t

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: P5276678, ram adjustment: 70 mm, stroke adjustment: 100 mm, pressing force: 35 t, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Nominal force: 35 t Cob Eylkswhdh Ieuegt Stroke adjustment: 8 - 100 mm Ram adjustment: 70 mm Stroke rate: 130 / min Motor power: 3 HP Other auctions from the same location: Further information according to the manufacturer - no guarantees given Ram surface: approx. 350 x 180 mm Space required: approx. 1.0 x 1.6 x 2.3 m