Condition: used, Year of construction: 1974, min. module 1 max. module 10 voltage 220/380 V frequency 50 Hz hole in dividing head spindle 145 mm total power requirement 14 kW weight of the machine ca. 4,7 t dimensions of the machine ca. 3,5 x 2,3 x 1,8 m 1) Working area: - Largest module to be milled: 10 - Largest travelling distance of the table slide: 695 mm - Largest centre distance: 870 mm - Largest workpiece diameter dk2: 300 mm - Smallest number of teeth that can be milled z2min Machine with 2-speed indexing gear: 4 Machine with 1-speed indexing gear: 8 2) Dimensions: - Bore of dividing head spindle: 145/141 mm - Centre distance between milling cutter and workpiece Dkjlisvkyamenbctsl min. 50 mm max. : 170 mm - Largest clampable hobbing cutter Length b1: 170 mm Diameter dk1: 150 mm - Diameter of cutter arbours (standard accessories): 32, 40 mm - Drive taper for milling arbours: 5 Morse taper - Taper for tailstock centre: 4 Morse tapers - Largest tangential path i+: 60 mm 3) Speeds and feed ranges: - Milling cutter speeds: 35.5, 45, 56, 71, 90, 112, 140, 180, 224, 280, 355 rpm - Axial feed: 0.25 .... 4 mm/WU - Radial feed: 0.175 .... 0.995 mm/WU

Condition: used, Year of construction: 2011, Waterjet cutting machine Manufacturer: Flow Type: MACH4 4020 Year of manufacture: 2011 Pump operating hours: approx. 6,895 Cutting area: 4,000 x 2,000 mm Pump: 6,000 bar 2 cutting heads (1 disconnected) Incl. software Accessories Replaced in 2024/06 Control for automatic sand feed Air conditioning units in control cabinet Various seals and valves on the pump replaced: 08/2024 Major pump maintenance: 03/2024 Dkelinbewhwbzjctel 05/2025

Year of construction: 2017, operating hours: 5,010 h, Condition: used, machine/vehicle number: HM1-1304, Turning diameter: 330 mm, turning length max.: 600 mm, travel (X/Z): 165+35/600 mm, B-axis, bar capacity: 52 mm, speed: max. 6,000 rpm, control FANUC Series 0i-TF, 12-station tool turret with driven tools, chip conveyor, machine weight: approx. 6,000 kg, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dslinbcjwh Tytetokl

Condition: excellent (used), Thread plug gauges different sizes M 80 x6 6 H. 476,00 Euro M 80 x 6 7 H. 476,00 Euro M 64 6 H Left 340,00 Euro M 62 6 H Good& scrap 320,00 Euro M 55. x 3 6 H 240,00 Euro M 55 x 1.5 6 H 240.00 Euro Dolisipxynonbctskl M 48 x 2 6 H 240,00 Euro are also sold individually

Condition: used, Dear Sir or Madam, Dkslinbcewhnl Rjtjl We are offering a polishing machine with accessories below.

Condition: good (used), Year of construction: 2017, CNC Lathe - Horizontal Manufacturer: HWACHEON Machine Model: HI-TECH 450 BL YMC Control: Fanuc i-Series Year of Manufacture: 2017 TECHNICAL DATA Max. Turning Length: (mm) 1,214 Max. Turning Diameter: (mm) 420 Chuck Size: (mm) 305 Max. Turning Diameter Over bed: (mm) 700 Travel paths - X-axis: (mm) 280 - Y-axis: (mm) 120 - Z-axis: (mm) 1,390 Rapid traverses - Rapid traverse X/Y/Z: (m/min) 20 / 10 / 24 Spindle - Bar capacity: (mm) 89 - Max. speed: (rpm) 2,500 - Drive power: (kW) 22 / 18.5 - Torque: (Nm) 1,050 / 883.8 Turret - Tool positions: 12 - Tool positions for driven tools: 12 - Tool holder: BMT-65 Dkjliowhpgcenbctel EQUIPMENT FEATURES + Flat guideways + C-axis + Y-axis + Blow-out gun + Steady rest carrier (suitable for SMW Autoblock) SLU-X-3-Z501215Z (SMW steady rest not included) + Manual steady rest, manufacturer RICHTER + Chip conveyor + Automatic tailstock and quill + Work light + Coolant tank capacity: 240 liters Power consumption: 55 kVA Weight: approx. 7,800 kg

Condition: like new (used), amount 1 Set Year unbekannt Jahr Dslinovx Uzhobctekl dimensions of the machine ca. 0 m

Condition: good (used), Year of construction: 1992, Weld edge beveling machine Manufacturer: INDUMASCH Type: V20 Year of manufacture: 1992 Dkolinjvwdk Nobctel Material thickness: 6 - 45 mm Weight: approx. 300 kg 080525ä

Year of construction: 2004, operating hours: 27,349 h, Condition: used, machine/vehicle number: AN0184, Turning diameter: 280 mm, turning length: 550 mm, travel (X/Z): 200/570 mm, C-axis, FANUC Series 21i-TB control, 12-station tool turret with driven tools, maximum speed: 5,000 rpm, chip conveyor, machine weight: approx. 5,500 kg, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dkeliewh Tymsnbctsl

Condition: excellent (used), Rotary table with rotary indexing Raster font 15 degrees ,corresponds to 24 pitch Possible division by degrees on the circumference accuracy 1 degree can be used horizontally and vertically Chuck Forkhardt F 160 with hard jaws Dimensions horizontal : height 135 mm width 270 mm depth 220 mm Dimensions vertical height with chuck 125 mm Hole in the chuck 42 mm width 270 mm depth 135 mm total height 220 mm Weight 28 kg Dkolion E Nubenbctel

Condition: good (used), Year of construction: 1992, honing diameter 79,375 mm stroke 150 mm spindle turning speed - stepless 200-2500 U/min stroke speed 60-350 Dop.m/min total power requirement 2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,5x1x1,6 m Dkolinbeul Etqsctsl SN-Nr. 189101

Condition: good (used), Year of construction: 2008, Crack testing machine Manufacturer: K+D Flux-Technic Type: Universal 4000 ACC Year of manufacture: 2008 Clamping length: 4,000 mm Test diameter: approx. 400 mm Dkjlinevmzm Hebctjl Workpiece weight: 2,400 kg Workpiece handling: minimum 200 mm 080525ä

Year of construction: 2012, operating hours: 8,758 h, Condition: used, machine/vehicle number: AT0602, Turning length: approx. 700 mm, turning diameter max.: 400 mm, travels (X/Y/Z): approx. 275/80/700 mm, 16-station tool turret with driven tools, C/A axis, control FANUC Series 31i-Model A, counter spindle, 12-station tool turret, with driven tools, speed: max. 5,000 rpm, tool holder: VDI 30, chip conveyor, Caution: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dolinbcewh Tygstjkl

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1,5 total power requirement 62 kW weight of the machine ca. 12 t dimensions of the machine ca. 4,7x4,4x2,45 m max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min Dkjlinsul Etdobctel

Condition: used, Year of construction: 2011, operating hours: 9,191 h, machine/vehicle number: 18514, Travels (X/Y/Z): 630/560/510 mm, max. spindle speed: 12,000 rpm, 40-station tool changer, SK 40 tool holder, FANUC control, KNOLL 500 K-1 chip conveyor, KNOLL KF 200/FKA 1300 compact filter system, year of manufacture: 2017, Attention: The machine still contains drilling emulsion and must be vacuumed, taken away and disposed of properly by the buyer!!! Dkolinbcswh Tyyetol

Condition: good (used), max. wheel diameter 630 mm gear width 375 mm max. module 10 clamping table 550 mm table hole 125 mm milling spindle speeds infinitely variable 62 - 390 U/min taper MORSE 5 axial-feeds 0,40 - 6,80 mm/U radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm no. of teeth min. 8 milling cutter dia. x width 192 / 215 mm shifting 200 mm main drive motor 7,5 kW total power requirement 21 kVa weight of the machine ca. 8,2 t Equipment of the machine: - Universal milling head with tangential displacement Dkolisua It Uenbctol - Pressure reducing valve for counterholder - Magnetic chip transport - Year of construction approx. 1976

Condition: used, Year of construction: 2011, operating hours: 16,613 h, machine/vehicle number: H-H41025, Travels (X/Y/Z): 1,020/&610/610 mm, spindle speed max.: 12,000 rpm, tool holder SK 40, 40-station tool changer, Ultimax control, chip conveyor, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dslowh Ty Hoinbctskl

Condition: like new (used), amount 39 STK Broaching tool, broach, special tool, grooving tool, grooving machine, grooving machine, grooving jointing machine, grooving jointing tool, broach Dsliju A I A Djnbctjkl - Manufacturer: KARL KLINK, Various broaches in a complete package, with cabinet. Quantity= 39 pcs. Unit price per piece = 140,00€ / per piece Complete purchase with cabinet = 120,00€ / per piece

Condition: good (used), Year of construction: 1975, max. wheel diameter 400 mm gear width 290 mm max. module 6 min. module 0,5 Dkjlinbceul Em Rjtel weight 4,6 t voltage 220/380 V frequency 50 Hz dimensions 3010 x 1800 x 2200 mm total power requirement 17 kW Working area: 1. largest module to be milled 6 mm 2. straight toothing a) Largest workpiece Ø 400 mm b) Largest length of toothing 290 mm 3. smallest number of teeth to be milled for 1-speed sub-gear 6 with 2-speed gearbox 3 Dimensions: 1. Ø of the workpiece table 400 mm 2. Ø of the table dimensions 80 mm 3. diameter of the workpiece mandrel 36 mm 4. largest clampable milling cutter: Ø diameter 160 mm Length 160 mm 5. diameter of the milling cutter arbour 32; 40 6. centre distance between milling cutter and workpiece a) Largest distance 300 mm b) Smallest distance 30 mm 7. drive cone for milling arbors MK 4 8. maximum milling cutter displacement: a) Tangential milling 120 mm b) Shifting 100 mm Accessories: Interchangeable wheels

Condition: used, Year of construction: 1998, workpiece diameter with ratio 1:10 300 mm workpiece diameter with ratio 1:1 212 mm max. number of teeth 200 min. number of teeth 6 x-travel 300 mm X - Axis speed 0,1-5.000 mm/sec. y-travel 400 mm Doleul El Toinbctskl Y - Axis speed 0,1-5.000 mm/sec. A - axis -170 / +170 ° control Siemens Sinumerik 840 C total power requirement 38 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,20 x 2,20 x 2,10 m incl. suction

Condition: good (used), Year of construction: 1975, tool taper MK4 diameter of tools max. Ø 145 mm table-size L: 800 x B: 700 mm surface area Ø 300 mm table travel 200 mm indexing max 5 Modul total power requirement 7,5 kW weight of the machine ca. 4,9 t dimensions of the machine ca. 2,8 x 1,5 x 2,3 m Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: Djlinbcju Imbvetokl -counter-point taper MK4, co-rotating -Centre distance of milling/clamping spindle with counter-holder min./max.: 30 / 240 mm -Counterholder with guide bushes (clamping arbor and milling arbor)

Condition: good (used), Year of construction: 1977, workpiece dia. x mm control x table dimensions x mm Dksleul Egqoinbctjl weight of the machine ca. x t dimensions of the machine ca. x m

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 Delinstycg Sjbctekl min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981

Condition: good (used), Year of construction: 1975, max. wheel diameter 400 mm gear width 290 mm max. module 6 min. module 0,5 weight 4,6 t total power requirement 17 kW Working area: 1. largest module to be milled 6 mm 2. straight toothing a) Largest workpiece Ø 400 mm b) Largest length of toothing 290 mm 3. smallest number of teeth to be milled for 1-speed sub-gear 6 with 2-speed gearbox 3 Dimensions: 1. Ø of the workpiece table 400 mm 2. Ø of the table dimensions 80 mm 3. diameter of the workpiece mandrel 36 mm 4. largest clampable milling cutter: Dslijugawxsnbctekl Ø diameter 160 mm Length 160 mm 5. diameter of the milling cutter arbour 32; 40 6. centre distance between milling cutter and workpiece a) Largest distance 300 mm b) Smallest distance 30 mm 7. drive cone for milling arbors MK 4 8. maximum milling cutter displacement: a) Tangential milling 120 mm b) Shifting 100 mm

Condition: good (used), x-travel 300 mm y-travel 340 mm z-travel 250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t Dkelinoucphxobctel Heidenh. 3 axes aktiv digital display Year of construction unknown