Condition: good (used), Year of construction: 2018, Projection welding machine and spot welding machine Manufacturer: WMA Schmidt & Bittner Type: PMP 11/200 Year of manufacture: 2018 As good as new, almost no operating hours Rated power (at 50% duty cycle): 200 kVA Connected load: 396 kVA Connector cross-section: 180 mm² Maximum welding current: 52.8 kA Thrust: 350 mm Electrode stroke: 100 mm Dobet Hlpho E Sg T Eokl ä080525

Condition: used, Dear Sir or Madam, We are offering a metal hacksaw with a coolant circuit and replacement blades. Dob E Sewhngzjg T Ejkl

Condition: used, Year of construction: 2016, operating hours: 60,000 h, Functionality: fully functional, Heller FMS with 2 x H2000 Machine make / type: HELLER H2000 Operating hours: 59,654 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: PC63 10,000 rpm, 38 kW, 242 Nm Tool clamping system: HSK63 Magazine / positions: Chain magazine / 160 positions Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make / type: HELLER H2000 Operating hours: 60,546 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: SC63 16,000 rpm, 40 kW, 96 Nm Tool clamping system: HSK63 Magazine / locations: Chain magazine / 240 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Deb E Sgewh Td Eo T Ejkl Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make/type FASTEMS FPC750 with expansion container Operating hours: No counter installed Year of manufacture: 2016 Control system: FASTEMS Memory locations: 24 memory locations, 2 setup stations Workpiece clamping: Mechanical Additional options, special features: 20 pallets included Further information and technical specifications upon request.

Condition: excellent (used), Year of construction: 2000, Siemens control unit Djb E Sg Towh U Eds Eekl Bar passage 32 mm 2 x 12-position turrets with driven tools Main / counter spindle Y-axis turret top Parts lifting device Chip conveyor IRCO bar loading magazine

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, GF AgieCharmilles FORM 3000 Year of manufacture 2008 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) ISPG generator with 60 amps Best achievable surface finish Ra 0.10 µm AGIEVISION 5 user interface Dsbewh Smrj E Sg T Eokl 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Includes CAPA Electrode changer - 60 electrode positions - 4 pallet positions Net weight of the system: 5900 kg Machine dimensions: 1790 x 2790 x 3110 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: new, ELGO desk, never assembled, new Dkeb E Sg Tjwgwkmo Eol

Year of construction: 1993, Condition: good (used), Compressor Booster Manufacturer: Boge Type: RHV 221-33 Year of manufacture: 1993 Final pressure: 25 bar Flow rate: 221 l/min ä080525 Dob Ejip T Rks Sg T Eokl

Condition: used, Dear Sir or Madam, We are offering for sale a used "HESKA" vertical band saw in good condition. Dkebjwhna Uj E Sg T Eol

Condition: used, Year of construction: 2003, machine/vehicle number: IntNr230445, branded CNC sliding head lathe Citizen L520-VII, year 2003 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, fire extinguishing system chip conveyor, IEMCA BOSS 432r loading magazine Dkeb E Sgjwh Sb Ao T Eel The machine can be inspected under power by appointment. Subject to changes and errors in the technical data and information as well as prior sale! used CNC-lathe Citizen L520-VII, year 2003 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, bar-Ø max. 20 mm, turning length max. 205 mm, main spindle, speed max. 10.000 rpm, C-axis 0,001 deg, counter spindle, speed max. 10.000 rpm, C-axis 0,001 degree, Tool holder f. total 18 tools (linear tool holder, front attachment, backworking), parts conveyor belt, fire extinguishing system chip conveyor, loading magazine IEMCA BOSS 432r The machine can be inspected under power by prior arrangement. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: excellent (used), Year of construction: 2004, Control Siemens Sinumerik 840D Dkob E Sjwh U D Hjg T Eel Bar capacity 65 mm Speed 5,000 min-1 2 x 12-way turret with driven tool Turret 1 with Y-axis Part collection device Belt filter system Chip conveyor Bar loading magazine IRCO Profimat

Condition: refurbished (used), Year of construction: 2019, Functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm AC FORM HMI user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm Dksb E Sgswh Sigs T Eol We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: good (used), Year of construction: 2000, Section steel shear with punch Manufacturer: Muhr and Bender Type: KLS 1100 Year of manufacture: 2000 Punching capacity: 110 tons Diameter x sheet thickness: 40 x 22 mm Dsbovwdn Io E Sg T Ejkl Thrust: 500 mm Maximum hole diameter: 80 mm Maximum cut-out thickness: 22 mm Weight: approx. 5,500 kg 080525ä

Condition: used, Dear Sir or Madam, We are offering a "Profilar" belt sander below. Price upon request Deb E Sewhm Tgjg T Eokl

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231259, Hermle C600 U, built in 2005, without Cellro magazine, with FANUC robot, without Lang loader (Cellro magazine with FANUC robot and Lang loader can be purchased optionally) Siemens 840 d control system Operating hours: 78,025 Spindle ON: 17,382 Drives ON: 37,955 Tool change: 586,110 NC software: 05.03.39 PLC software: 05.03.21 18,000 SK40 spindle Laser tool breakage monitoring Sensor Oil mist extraction Chip flushing gun X travel: 600 Y travel: 450 Z travel: 450 Rapid traverse in X/X/Z: 35 m/min Infinitely variable spindle speed Weight: approx. 6,700 kg Chip conveyor on the left Additional tank Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool positions Equipment: - Rigid clamping table - NC reversible clamp iTNC - Coolant system standard - Chip conveyor - Enclosed cabin roof section - Electronic thermal compensation (iTNC) - Electronic manual control module (iTNC) - Tool breakage monitoring - Chip flushing gun - Foot switch for clamping/unclamping - 200 bar hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axes in motion: 35 m/min - Acceleration: 5 m/s² - X/Y/Z measuring system: 0.1 µm Optionally available: Cellro magazine, built in 2005, automated storage system with robot for 300 tool holders Technical description of the Cellro magazine with Fanuc robot • Type: Automated storage system (robot magazine) • Capacity: 300 tool holders (for storage and quick tool exchange) Optionally available: LANG Technik automation system with slide arrangement, built in 2005, storage capacity of approximately 50-60 clamping vises. Dimensions & weight of the machine tool: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes and errors in the technical data and information, as well as prior sale! Hermle C600 U, year 2005, without Cellro magazine, with FANUC robot, without long loader (Cellro magazine with FANUC robot and long loader can be purchased as an option) Siemens 840 d control system Operating hours: 78025 Spindle ON: 17382 Drives ON: 37955 Tool change: 586110 NC software: 05.03.39 PLC software: 05.03.21 18,000 Spindle SK40 Tool breakage monitoring Laser Probe Oil mist extraction Chip flushing gun X-path: 600 Y-path: 450 Z-path: 450 Rapid traverse in X/X/Z 35 m/min Stepless spindle speed Weight approx. 6700kg Chip conveyor left Additional tank Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool positions Equipment: - Rigid clamping table - NC reversible clamp iTNC Dkob E Sg Tewh Sbie Esl - Standard coolant unit - Chip conveyor - Closed cabin roof section - Electronic thermal expansion compensation (iTNC) - Electronic manual control module (iTNC) - Breakage monitoring tool - Chip flushing gun - Foot switch for clamping/unclamping - Hydraulic unit 200 bar for clamping/unclamping Traverse paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z axis (vertical): 450 mm Table: - Clamping surface: 800mm x 465mm - Maximum table load: 250 kg Axes: - Axes in motion: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Optionally available: Cellro magazine built in 2005 automated storage system with robot for 300 tool holders Technical description of the Cellro magazine with Fanuc robot - Type: Automated st

Condition: excellent (used), Year of construction: 1997, Control Fanuc Series 20-T Turning diameter 330 mm Bar diameter 42 mm Turning length 650 mm Speed 5,000 min-1 Dkob E Sgewh U Dtj T Ejl 8-position turret Minimum quantity lubrication

Condition: good (used), Year of construction: 1989, Punching machine Manufacturer: Amada Type: Aries 245 Year of manufacture: 1989 CNC control: Amada 04PA Operating hours: approx. 20,000 Punching force: 200 kN Maximum sheet thickness (stainless steel): 3 mm Maximum sheet thickness (mild steel): 4 mm Maximum sheet thickness (aluminum): 3 mm Dob E Sgjrxrgdo T Eokl Travel paths: 1,270 x 1,000 mm Turret: 20-station (2x rotating B-stations) Includes complete tool set! Power: 11 kVA Dimensions: LxWxH = 2,700 x 3,784 x 1,950 mm Weight: 7,500 kg plus 2,500 kg base plate ä080525

Condition: used, Dear Sir or Madam, We are offering a used "FLOTT" belt sander in good condition. Dob E Sgowhm H He T Ejkl TYPE: "BSM-150" with dust extraction system Belt dimensions: 2000 x 150 mm Power: 3.0 kW Weight: 130 kg

Condition: good (used), Year of construction: 1991, Saw Blade Chamfering Machine Manufacturer: Loroch Dkeb E Sgjhwixde T Eol Model: AK Year of Manufacture: 1991 For chamfering HSS and segment circular saws ä080525

Condition: used, Year of construction: 2004, Dear Sir or Madam, We are offering a used "BERG UND SCHMID" aluminum cold circular saw in good condition. Model: "Multi Cut 500HA PENTA" Digital miter angle display Infinitely adjustable saw feed Two pneumatic vertical vices Ball-bearing rotary table for miter and rip cuts Mist spray system Year of manufacture: 2004 Serial number: 091 Dob Eewhmy Hj Sg T Ejkl Technical specifications: HM saw blade Ø 500 x 4.2/3.6 x 30 mm Cutting range [mm] 90° 45° left 45° right Round 160 140 140 Square 140 120 120 Rectangle 100x200 100x150 100x150 Speed: 2800 rpm Infinitely adjustable feed speed External dimensions W x D x H: 85 x 105 x 145 cm Weight: 350 kg Accessories: Discharge length stop with roller conveyor ST 260 roller width 260 mm, made of plastic, 4.0 m

Year of construction: 2018, Condition: like new (used), Zero-Point Clamping System Manufacturer: Vischer & Bolli VB tools Year of manufacture: 2018 Dsb E Sg Tjgquv Uj Eokl Condition: Unused System consists of: 1 DockLock locking plate made of steel Size: 600x200x85/95 mm with 2 DockLock SAFE20 built-in cylinders up to 12.5 kN per cylinder 10 mounting holes for M16 Allen key 1 special steel base plate Size: 800x250x76 mm 1 DEUX-MILL clamp 1 special aluminum base plate Size: 600x600x40 mm 5 SAFE20 long clamping bolts with centering 10 SAFE20 long clamping bolts without centering 5 SAFE20 long compensating clamping bolts 1 hydraulic pump ä080525

Condition: good (used), Plasma power source Manufacturer: Kjellberg Type: HiFocus 160i with automatic gas console Cable assembly and torch Cutting data: Puncture up to 30 mm Cutting up to 50 mm 080525ä Deb E Sgst H I Iys T Ejkl

Condition: good (used), Year of construction: 2006, CNC Portal Flame Cutting Machine Manufacturer: Messer Type: Easytherm 4600 Year of Manufacture: 2006 Control System: Global Control Dob E Soivz A Rjg T Ejkl Working Area: 3 x 9 m No Table!! Table available upon request! Track Length: 12 m with HEB Carrier 1 ALFA Oxyacetylene Torch 1 Plasma Torch with Kjellberg 160i Plus Power Source Including Marking Torit Filter System In-house technicians available for installation, commissioning, and training! All spare parts in stock. ä080525

Condition: good (used), Year of construction: 2007, CNC Portal Plasma Cutting Machine Manufacturer: Zinser Type: 2425 N Year of Manufacture: 2007 CNC Control: CNC2050 Dksb Eofnxmxj Sg T Esl 1 plasma torch with Kjellberg HiFocus 160i power source Working area: 2 x 4 m Track length: 6 m Table and filter available upon request ä080525

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Tool holder, horizontal and vertical: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill diameter 100 mm, extendable vertical: 75 mm M & H 3D Buttons Individual feed motors for each axis – three-phase (brushless) Feed range in X, Y, and Z manual/programmable: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Probe system Counterholder with counter bearing Chip conveyor with chip trolley Coolant tank: 150 liters Dksb E Sg Tsv Rxa Sj Esl Weight approx.: 4,800 kg Machine dimensions LxWxH approx.: 2,950 x 1,840 x 2,150 mm 080525ä

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Horizontal and vertical tool holder: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill stroke vertical: 75 mm Renishaw 3D probe Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manual / program-controlled: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Dobsv Rpr Sj E Sg T Eekl Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Coolant tank: 170 liters Flow rate/pressure: 40 L/min. at 3 bar Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm Information: If you tilt the vertical milling head from its zero position to a +/- angle position, e.g., to produce inclined surfaces or holes, the working range of the Y-axis is reduced from 450 mm to 410 mm. 080525