Condition: good (used), Year of construction: 1975, tool taper MK4 diameter of tools max. Ø 145 mm table-size L: 800 x B: 700 mm surface area Ø 300 mm table travel 200 mm indexing max 5 Modul total power requirement 7,5 kW weight of the machine ca. 4,9 t dimensions of the machine ca. 2,8 x 1,5 x 2,3 m Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of milling/clamping spindle with counter-holder min./max.: 30 / 240 mm -Counterholder with guide bushes (clamping arbor and milling arbor) Fsbvcvju Imbvohdegb

Condition: used, Year of construction: 2011, Waterjet cutting machine Manufacturer: Flow Type: MACH4 4020 Year of manufacture: 2011 Pump operating hours: approx. 6,895 Cutting area: 4,000 x 2,000 mm Pump: 6,000 bar 2 cutting heads (1 disconnected) Incl. software Accessories Replaced in 2024/06 Control for automatic sand feed Air conditioning units in control cabinet Febvjwhwbzjcvhdjgb Various seals and valves on the pump replaced: 08/2024 Major pump maintenance: 03/2024 05/2025

Condition: excellent (used), Thread plug gauges different sizes M 80 x6 6 H. 476,00 Euro M 80 x 6 7 H. 476,00 Euro M 64 6 H Left 340,00 Euro M 62 6 H Good& scrap 320,00 Euro M 55. x 3 6 H 240,00 Euro M 55 x 1.5 6 H 240.00 Euro M 48 x 2 6 H 240,00 Euro Fjbvcoipxynovhdsgb are also sold individually

Year of construction: 2017, operating hours: 5,010 h, Condition: used, machine/vehicle number: HM1-1304, Turning diameter: 330 mm, turning length max.: 600 mm, travel (X/Z): 165+35/600 mm, B-axis, bar capacity: 52 mm, speed: max. 6,000 rpm, control FANUC Series 0i-TF, 12-station tool turret with driven tools, chip conveyor, machine weight: approx. 6,000 kg, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Febvowh Tytocvhdegb

Condition: used, Dear Sir or Madam, Fgebvcvhewhnl Rsdsb We are offering a polishing machine with accessories below.

Condition: good (used), Year of construction: 2017, CNC Lathe - Horizontal Manufacturer: HWACHEON Machine Model: HI-TECH 450 BL YMC Control: Fanuc i-Series Year of Manufacture: 2017 TECHNICAL DATA Max. Turning Length: (mm) 1,214 Max. Turning Diameter: (mm) 420 Chuck Size: (mm) 305 Max. Turning Diameter Over bed: (mm) 700 Travel paths - X-axis: (mm) 280 - Y-axis: (mm) 120 - Z-axis: (mm) 1,390 Rapid traverses - Rapid traverse X/Y/Z: (m/min) 20 / 10 / 24 Spindle - Bar capacity: (mm) 89 - Max. speed: (rpm) 2,500 - Drive power: (kW) 22 / 18.5 - Torque: (Nm) 1,050 / 883.8 Turret - Tool positions: 12 - Tool positions for driven tools: 12 - Tool holder: BMT-65 EQUIPMENT FEATURES + Flat guideways + C-axis + Y-axis + Blow-out gun + Steady rest carrier (suitable for SMW Autoblock) SLU-X-3-Z501215Z (SMW steady rest not included) + Manual steady rest, manufacturer RICHTER + Chip conveyor + Automatic tailstock and quill + Work light + Coolant tank capacity: 240 liters Fsbswhpgcsvcvhdegb Power consumption: 55 kVA Weight: approx. 7,800 kg

Condition: good (used), Year of construction: 1977, workpiece dia. x mm control x Fobeul Egqsvcvhdsgb table dimensions x mm weight of the machine ca. x t dimensions of the machine ca. x m

Condition: excellent (used), Year of construction: 2018, This Hurco VM30i Vertical Machining Centre (2018) is available to purchase immediately. All viewings are by appointment only. Spindle Hours 3186 X Axis Travel 1270mm Y Axis Travel 508mm Z Axis Travel 508mm Table Size 1,321mm x 508mm T Slot Size 5 slots, 18mm wide Maximum Table Load 1,800kg Maximum Spindle Speed 12,000 RPM Spindle Power 15kW Tool Type BT40 Number of Tools 24 Maximum Tool Diameter 80mm Maximum Tool Length 250mm Maximum Tool Weight 7 KG Rapid Traverse Rates (X, Y, Z Axis) 28 m/min Maximum Programmable Feedrate 28 m/min Spindle Nose to Table Distance 102 mm Spindle Torque 82.3 Nm 1,740 rpm Machine Weight 4,320 kg Machine dimensions (LxWxH) 4,086mm x 3,312mm x 2,543mm Swarf Conveyor Swarf Skip 20x BT40 Tooling Package. BT40 Swing Arm Spindle Chiller Coolant Washdown Hurco Winmax 5 Twin Screen Control Hurco Stackable Vice Fobvowid Drjcvhdsgb Auxilliary Graphics Screen Classic Package: Air Hose and Pistol Assembly Anti Fatigue Mat 120 GB Solid State Hard Drive 3.5GB Ram True Type Engraving High Resolution 3D Rendered Graphics Real time tool simulation USB Port High Speed Profiling software with S curve acceleration with selectable surface finish quality Software Options Include: Advanced Verification Graphics DXF software NC Productivity package Ultipockets Insert Pockets Rigid Tap Helical Ramp Airblast Ethernet Networking and Remote Diagnostics Hurco Height Setter Gewefa 3D Part Setter Adapt ipath NC Conversational Merge Selectsurface Finish Quality Tool and Material Library UltiMotion Tool Change Optimisation

Condition: excellent (used), Rotary table with rotary indexing Raster font 15 degrees ,corresponds to 24 pitch Possible division by degrees on the circumference accuracy 1 degree can be used horizontally and vertically Chuck Forkhardt F 160 with hard jaws Dimensions horizontal : Fgobvcvhjn E Nubedjb height 135 mm width 270 mm depth 220 mm Dimensions vertical height with chuck 125 mm Hole in the chuck 42 mm width 270 mm depth 135 mm total height 220 mm Weight 28 kg

Year of construction: 2004, operating hours: 27,349 h, Condition: used, machine/vehicle number: AN0184, Turning diameter: 280 mm, turning length: 550 mm, travel (X/Z): 200/570 mm, C-axis, FANUC Series 21i-TB control, 12-station tool turret with driven tools, maximum speed: 5,000 rpm, chip conveyor, machine weight: approx. 5,500 kg, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Fgebvcvhewh Tymedob

Condition: used, Dear Sir or Madam, Fobvcvjwhngzshdegb We are offering a metal hacksaw with a coolant circuit and replacement blades.

Condition: good (used), Year of construction: 1992, Weld edge beveling machine Manufacturer: INDUMASCH Type: V20 Year of manufacture: 1992 Fsbvcevwdk Njvhdjgb Material thickness: 6 - 45 mm Weight: approx. 300 kg 080525ä

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm Fjbvcvhstycg Ssdsgb no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981

Year of construction: 2012, operating hours: 8,758 h, Condition: used, machine/vehicle number: AT0602, Turning length: approx. 700 mm, turning diameter max.: 400 mm, travels (X/Y/Z): approx. 275/80/700 mm, 16-station tool turret with driven tools, C/A axis, control FANUC Series 31i-Model A, counter spindle, 12-station tool turret, with driven tools, speed: max. 5,000 rpm, tool holder: VDI 30, chip conveyor, Caution: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Fgjbvcvhjwh Tygsdjb

Condition: used, Dear Sir or Madam, Fgobewhna Uevcvhdjb We are offering for sale a used "HESKA" vertical band saw in good condition.

Condition: good (used), Year of construction: 2008, Crack testing machine Manufacturer: K+D Flux-Technic Fgsbvsvmzm Hscvhdeb Type: Universal 4000 ACC Year of manufacture: 2008 Clamping length: 4,000 mm Test diameter: approx. 400 mm Workpiece weight: 2,400 kg Workpiece handling: minimum 200 mm 080525ä

Condition: good (used), Year of construction: 1975, max. wheel diameter 400 mm gear width 290 mm max. module 6 min. module 0,5 weight 4,6 t total power requirement 17 kW Working area: 1. largest module to be milled 6 mm 2. straight toothing a) Largest workpiece Ø 400 mm b) Largest length of toothing 290 mm 3. smallest number of teeth to be milled for 1-speed sub-gear 6 with 2-speed gearbox 3 Dimensions: 1. Ø of the workpiece table 400 mm 2. Ø of the table dimensions 80 mm 3. diameter of the workpiece mandrel 36 mm 4. largest clampable milling cutter: Ø diameter 160 mm Length 160 mm 5. diameter of the milling cutter arbour 32; 40 6. centre distance between milling cutter and workpiece a) Largest distance 300 mm Fgsbsugawxjvcvhdjb b) Smallest distance 30 mm 7. drive cone for milling arbors MK 4 8. maximum milling cutter displacement: a) Tangential milling 120 mm b) Shifting 100 mm

Condition: used, Year of construction: 2011, operating hours: 9,191 h, machine/vehicle number: 18514, Travels (X/Y/Z): 630/560/510 mm, max. spindle speed: 12,000 rpm, 40-station tool changer, SK 40 tool holder, FANUC control, KNOLL 500 K-1 chip conveyor, KNOLL KF 200/FKA 1300 compact filter system, year of manufacture: 2017, Attention: The machine still contains drilling emulsion and must be vacuumed, taken away and disposed of properly by the buyer!!! Fjbvcvowh Tyyjhdegb

Condition: used, Dear Sir or Madam, We are offering a "Profilar" belt sander below. Price upon request Fobvcvewhm Tgjhdsgb

Condition: good (used), Year of construction: 2018, Projection welding machine and spot welding machine Manufacturer: WMA Schmidt & Bittner Fjbjt Hlphsvcvhdegb Type: PMP 11/200 Year of manufacture: 2018 As good as new, almost no operating hours Rated power (at 50% duty cycle): 200 kVA Connected load: 396 kVA Connector cross-section: 180 mm² Maximum welding current: 52.8 kA Thrust: 350 mm Electrode stroke: 100 mm ä080525

Condition: good (used), x-travel 300 mm y-travel 340 mm z-travel 250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t Heidenh. 3 axes aktiv digital display Year of construction unknown Fgebvcvsucphxehdob

Condition: used, Year of construction: 2011, operating hours: 16,613 h, machine/vehicle number: H-H41025, Travels (X/Y/Z): 1,020/&610/610 mm, spindle speed max.: 12,000 rpm, tool holder SK 40, 40-station tool changer, Ultimax control, chip conveyor, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Fjbvcjwh Ty Hevhdsgb

Condition: used, Dear Sir or Madam, We are offering a used "FLOTT" belt sander in good condition. TYPE: "BSM-150" with dust extraction system Belt dimensions: 2000 x 150 mm Fjbvcvowhm H Hjhdegb Power: 3.0 kW Weight: 130 kg

Year of construction: 1993, Condition: good (used), Compressor Booster Manufacturer: Boge Type: RHV 221-33 Year of manufacture: 1993 Fsbvcvhjip T Rkodjgb Final pressure: 25 bar Flow rate: 221 l/min ä080525

Condition: good (used), Year of construction: 2000, Section steel shear with punch Manufacturer: Muhr and Bender Type: KLS 1100 Year of manufacture: 2000 Punching capacity: 110 tons Diameter x sheet thickness: 40 x 22 mm Febvcvhjvwdn Ijdsgb Thrust: 500 mm Maximum hole diameter: 80 mm Maximum cut-out thickness: 22 mm Weight: approx. 5,500 kg 080525ä