Condition: excellent (used), Year of construction: 1992, Gildemeister GM20/6 Multi-Spindle Screw Machine Mfd. 1992 6 Spindles Capacity: 25mm Chip Conveyor Csb Hl Rgjwa D T Ijgjrb Stock Reel and Stand Pickoff Threading Polygon attachment Frontal Milling Part ejection Bar feed IEMCA PRA 40/42/P

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, Functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Crsb Hl Rowcfgbjggjb Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, CNC Control Siemens Sinumerik Control 840 D CNC Control Type Siemens Turning Dia 160 mm Chuck Size 215 mm X-axis Travel 280 mm Ceb Hl Rgjwa U Upegerb Spindle Speed (rpm) 4,500 RPM Live Tooling Yes Machine Dimensions 3,099 x 2,515 x 2,997 mm Machine Weight 11,000 kg Max peak distance – 737 mm Max feed force X/Y (40% CDF) – 10/8 kN Working stroke X/Y – 280 mm / 1.14 mm Max process speed X/Y – 30/60 m/min Ball screw diameter X1/Z1 – 40 mm / 40 mm Number of tools – 12 (2x) Tool holder – VDI 40 Spindle bearing diameter – 89 mm Spindle flange – A6 Rated Speed – 1,500 RPM

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL total power requirement 45 kW weight of the machine ca. 7 t dimensions of the machine ca. 4x3x2,5 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Crob Hl Rev Ehbbeggsb Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 12020 kg Control Unit Brand MAZATROL Movement X-Axis Movement 203.2 Y-Axis Movement 70.10 Csb Hl Rewfuqueggjrb Z-Axis Movement 71.8 Additional Equipment Tool Taper: CAT#40 / Automatic Tool Changer (ATC): 48 tools This 3-axis Mazak VCN 700E/40-II vertical machining center was manufactured in 2013. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this Mazak VCN 700E/40-II vertical machining center. Contact us for more information. Application Types Milling

Year of construction: 1994, Condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle adaptor MK 3 - right - left rotation - Drilling spindle stroke 150 mm - drilling spindle speed infinitely variable 80 - 1170 rpm - 2 feeds 0,1 / 0,2 mm/rev - throat 290 mm - max distance table - drilling spindle 780 mm - table with 2 T-slots 480 x 400 mm - Height adjustable via toothed rack with hand crank - Drive 400 V / 0,9 / 1,3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - coolant device - quick-action drill chuck 1-13 - illumination Crjb Hledkx Ans Rggjb

Condition: excellent (used), Year of construction: 2016, Tornos MultiSwiss 6x16 CNC Multi-Spindle Screw Machine Mfd. 2016 6 Spindles Diameter:16mm Fanuc Control Equipped as pictured Run time: 42,689 hrs Power on: 64,668 hrs Standard tornos bar feed (5ft) Cob Hlowa D Tuo Rggsrb 6 Motorspindles 5,5 kW max. speed 8’000 RPM Spindle capacity 14 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8’000 RPM, 150mm stroke. Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO (DCS version) (requires 3001) contact us for more details

Year of construction: 1998, Condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Crsb Hofnk Ehsl Rggob Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: excellent (used), CNC Control 32i-Model B CNC Control Type Fanuc Turning Diameter: 17.72″ Chuck Size: 23.6″ Spindle Speed: Up to 3500 RPM Dimensions: 118 x 75 x 102 inches Weight: 24,251 lbs Max Process Speed: 30 m/min Ball Screw Diameter: X1=1.6″, Z1=1.6″ Number of Tools: 12 Tool Holder: VD140/50 Tool Flight Circle: 24.4″ Spindle Bearing Diameter: 5.9″ Drive Power: 52 kW (100% CDF), 67 kW (40% CDF) Csbewa Tz Uo Hl Rggorb Rated Speed: 1,200 RPM Max Speed: 3,500 RPM Tailstock Features: Working Stroke: 7.9″ Spindle Bearing: Rigid, without bearing Max Peak Distance: 25.2″ Pressing Force: 850 daN Center Point Adapter: MK4

Condition: good (used), Year of construction: 2003, max. ram stroke 100 mm max. module 8 table diameter 400 mm Cob Hlsvfwuqe Rggerb workpiece diameter 600 mm strokes per minute 80-1200 Hübe/min Feed radial axis from - to 1 - 3750 mm/min angle adjustable from - to - 0,5 / + 0,5 Grad Accessories: - Various tool holders - Various clamping devices - Documentation

Year of construction: 2012, Condition: ready for operation (used), General Data Measurements width 1000 mm Measurements depth 1700 mm Measurements height 870 mm Machine weight 11974 kg Control Unit Brand MAZATROL Main Drive Number of spindles 2 Spindle speed range 4000 RPM Spindle motor power 30 HP Spindle bore 87,884 mm Number of axis 3 Movement X-Axis Movement 309.88 X-Axis Rapid Traverse 945 IPM Y-Axis Movement 76.2 mm Z-Axis Movement 605.028 mm Z-Axis Rapid Traverse 945 IPM Turret Number of turrets 2 Rotating tools Yes Tools Number of station 12 Additional Equipment Max Cutting Length (Chucker): 225 mm Max Distance Between Spindle Faces: 1450 mm Min Distance Between Spindle Faces: 249.42mm General Data Measurements width 1000 mm Measurements depth 1700 mm Measurements height 870 mm Machine weight 11974 kg Control Unit Brand MAZATROL Main Drive Number of spindles 2 Spindle speed range 4000 RPM Spindle motor power 30 HP Spindle bore 87,884 mm Number of axis 3 Movement X-Axis Movement 309.88 X-Axis Rapid Traverse 945 IPM Y-Axis Movement 76.2 mm Z-Axis Movement 605.028 mm Z-Axis Rapid Traverse 945 IPM Turret Number of turrets 2 Rotating tools Yes Tools Number of station 12 Additional Equipment Max Cutting Length (Chucker): 225 mm Max Distance Between Spindle Faces: 1450 mm Min Distance Between Spindle Faces: 249.42mm Cebewfurle Hl Rggorb This 3-axis Mazak Multiplex 6300-II Y was manufactured in 2012, offering robust capabilities for horizontal turning. Ideal for precision machining, this used machine maintains a solid performance record. Consider the opportunity to buy this Mazak Multiplex 6300-II Y horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 50, laser power: 12,000 W, working range: 715 mm, total length: 260,000 mm, workpiece weight (max.): 1,500 kg, warranty duration: 60 months, cutting speed: 100 mm/min, Equipment: cooling unit, HSG Laser | TX 3+1 Heavy-duty Tube Fiber Laser Cutting Machine Size: 7026mm, 9032mm, 12036mm, 12050mm Laser source power: 3000 - 12000W Cutting Capacity: Round tube: Φ15-500 (TL Φ15-715); Square tube: □15*15 - 350*350 Rectangular diagonal ≤ 500mm Optional function: automatic loading and unloading system 3+1 Twin-chucks Clamping Cutting Technique Cjb Hertiirol Rggjrb

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Crsb Hlsq Npqmo Rggeb Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Year of construction: 2017, Condition: excellent (used), machine/vehicle number: #2T1-1001 , The SHD2400S Skiving & Roller Burnishing machine was used as a beta test machine from May 2017 through May 2019 and is available for sale at a discounted price. The machine is offered with a 3 year warranty at the time of installation. SHD2400S skiving and roller burnishing machine features: Maximum part length 2 m (6.56 ft.) Spindle Power: 57 kW (76 hp) induction motor Diameter range 50-180 mm (2”-7”) Ceb Hleh Aywne Rggerb 400 VAC/50 Hz or 460 VAC/60 Hz compatible Machine includes pressure head PH2460001 and SHD8200 Coolant system with filtration Dirty and clean tank capacity 1130 gallons each (2260 gallons total) Optional double wall tank for added leak protection

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, turning length: 1,200 mm, turning diameter over cross slide: 350 mm, turning diameter: 350 mm, spindle motor power: 24,000 W, spindle speed (max.): 5,700 rpm, spindle bore: 120 mm, travel distance X-axis: 200 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 45 m/min, rotational speed (max.): 20,000 rpm, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Control: Siemens SINUMERIK 840D sl DSG-Filter RBF700_500, Industriefilter M 1600 EC, and IF-Vario M 1600 EC. Includes a bin/crate of extra spindles, 4 additional live tooling units, and other spare parts. Crob Hjwa Ttwjl Rggeb

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check Cob Hl Rjul Efmsggorb - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Year of construction: 2009, Condition: ready for operation (used), General Data Measurements width 1879,6 mm Measurements depth 2743.2 mm Measurements height 1905 mm Machine weight 11000 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 4000 RPM Spindle motor power 35 HP Spindle bore 76.2 mm Number of axis 2 Movement X-Axis Movement 177,8 mm Z-Axis Movement 558,8 mm Workpiece Workpiece drm over bed 6731 mm Turret Number of turrets 1 Tools Ceb Hl Rewfuqzeggorb Number of station 12 This Mazak QTN 250-II was manufactured in 2009. A robust horizontal turning machine, it offers reliable performance for precision machining. Ideal for those looking to enhance their machining capabilities with a proven model. Contact us for more information. Application Types Turning

Condition: good (used), SPİNDLE HOLE DİA 1.3" POWER 7.5 hp RPM 8,500 RPM # AXİS 8 CONTROL CNC (FANUC 32i-B Plus) Machine concept Number of linear axes + C-axes 6 + 2 Number of spindles 2 Number of channels 2 Main spindle Maximum bar capacity mm | in 32 | 1.26 Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 7.5/5.5 | 10.1/7.4 S2 15 min/S1 Torque (S2 30 min/S1) Nm | ft lbs 51.9/40.4 | 38.3/29.8 S2 15 min/S1 Counter spindle Maximum bar capacity mm | in 32 | 1.26 C-axis (0.001°) Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 3.7/2.2 | 5.0/3.0 Torque (S2 30 min/S1) Nm | ft lbs 23.6/14 | 17.4/10.3 Working area/ travels Z1 travel (spindle travel) mm | in 100 | 3.94 Tool carrier 1: X1/Y1 travel mm | in 70/405 | 2.76/15.94 Counter spindle: X2/Z2 travel mm | in 300/200 | 11.81/7.87 Tool carrier 2: Y2 travel mm | in 135 | 5.31 Rapid traverse speed on linear axes X1, Z1, X2, Z2/Y1, Y2 m / min | in/ min 40/30 | 131/98 Acceleration in linear axes m /s² | ft 5 | 0.02 Tool holder on slide 1 Fixed turning tools 6 Tools for front machining/back-working 4/4 Driven tools 2 + 2 Maximum speed rpm 6,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3.5/3 | 2.6/2.2 Maximum speed rpm 4,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 5.25/4.5 | 3.9/3.3 Tool holder on slide Y2 On station for back working Fixed/driven tools for back-working 4/4 (5/4)* Maximum speed rpm 6,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3.5/3 | 2.6/2.2 Tool holder on slide 2 Ceb Hlorbl N Es Rggerb Fixed/driven tools for back-working 2/0 (0/2)* (0/1 for polygons)* Maximum speed rpm 4,250 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3.5/3 | 2.6/2.2 Machine Footprint m² | ft² 2.8 | 30.1 Machine height mm | in 2.085 | 82.09 Machine weight (including coolant tank) kg | lbs 3,550 | 7,826 Control system DMG MORI SLIMline Control with 10.4″ monitor FANUC 32i Automatic turning with 6 linear axes and 2 C-axis Main spindle with 8,500 rpm, 29.8 ft lb, 7.4 hp Counter spindle with 8,500 rpm, 10.3 ft lb, 3 hp Total of 41 tool stations 8 driven tool stations as standard Driven tools spindles 6,000 rpm, 2.2 ft lb, 1.3 hp Control panel with 10.4" color display and FANUC 32i-B Plus 2 control channels, 6 linear axes and 2 C-axes Tool Monitoring System with graphical tool load display as option Up to 2 tools working simultaneously EQUIPPED WITH: Patriot 338 Edge Bar Feed Sliding Headstock Belt Type Chip Conveyor

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° total power requirement 4 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Milling length 1750 mm Milling width 260 mm Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Cebswhquus Hl Rggorb Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm Bcfed2Md7M Milling head swivels on both sides for helical gearing 30 ° Machine weight approx. 4 t Space requirement approx. 4 x 1.85 x 1.85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - documentation

Condition: good (used), Year of construction: 2013, Tornos MultiSwiss 6x14  CNC Multi-Spindle Mfd. 2013 Capacity: 14mm 6 Motorspindles  5,5 kW max. speed 8’000 RPM Spindle capacity 14 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8’000 RPM, 150mm stroke. Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO (DCS version) Cjb Hl Rgjv S Iawjgsrb (requires 3001) contact us for more details

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 14974, Tornos MultiSwiss 6x16  Creb Hl Rev S H Uyeggeb CNC Multi-Spindle Screw Machine Mfd. 2019 6 Motorspindles  5,5 kW max. speed 8’000 RPM Spindle capacity 16 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8’000 RPM, 150mm stroke. Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO (DCS version) (requires 3003) contact us for more details

Condition: excellent (used), Year of construction: 2022, Doosan DBM 2030 Bridge Mill Double Column and Bridge Type Machining Center Installed 2022 Crobjv Iq Hfs Hl Rggjb Control: Fanuc 31i-B, 15" Screen Contact us for specifications

Condition: good (used), Year of construction: 2007, INDEX MS22C, Mfd. 2007, Assorted Tooling, 10-ft IEMCA SIR Bar feed, Excellent condition Cob Hl Rgsv Daz Regorb Contact us for full details

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 1040-0016, STUDER S22 Cylindrical Grinder (used) Mfd 2010 Serial #: 1040-0016 with Auto-Load and Fanuc Robot load system, low hours, well maintained, many spares and extra wheels, fixtures, etc. Available immediately. It has straight, fixed wheel-head and was set up for OD’s only. It can grind multiple OD’s simultaneously, but does not do ID’s or faces on the work piece. Ideally suited for a production environment. SPECIFICATIONS SWING: 14" PLAIN OR ANGLE HEAD: Plain GRINDING WHEEL DIA.: 24" CONTROL: CNC (Fanuc) The S22 is a production platform for the mass production of medium-sized workpieces. It has distances between centres of 650mm (25.6") / 1100mm (43.3") and centre heights of 175mm (6.9") / 225mm (8.8"). It can machine workpieces with a maximum weight of 150kg (330lbs). The S22 with its extensive expansion options can be configured for every grinding application to be the perfect production machine. Highly dynamic axis drives, high-quality STUDER guideway systems, short reaction times and optimized traverses form the basis of the S22. The high-speed grinding option (HSG) contributes to increasing productivity with its peripheral speed of up to 140m/s (27,600 sfpm). Hardware: GranitanR S103 mineral casting machine base Cross slide X: anti-friction guideways with ball-screw Longitudinal slide Z: guideway with patented surface structure and ballscrew drive C-axis for the workhead Application-specific workhead concepts Additional NC axis for profiling the grinding wheel Full enclosure with movable front panels for optimal accessibility Integrated loading unit or loading cell for loading and unloading from left, right or above Large range of accessories Software: Easy programming with StuderWIN on Fanuc 31i-A StuderGRIND programming software to create grinding and dressing programs Standardized interfaces for loader and peripheral devices EQUIPPED WITH Fanuc 31i-A control Full C Axis work head 24" fixed straight wheel Crsb Hjv Dazwsl Rggeb Auto Load Fanuc Robot System Fixtures Extra Wheels Spare Parts Low Hours Extremely well maintained

Condition: good (used), INDEX MS22-8 1 INDEX C200-4 D SL control 2 NCU - Number of spindles: 8 - Bar diameter: 22mm - Spindle power: 15 kW - Spindle speed: 10,000 rpm Control: INDEX C200-4 D SL controller With IEMCA SIR Bar Feed (10ft) 1 Pickup Attachment - Number of spindles: 8 - Bar diameter: 22mm - Spindle power: 15 kW - Spindle speed: 10,000 rpm - 1.1 Slide units: X and Z axes controlled by CNC - 1.2 slide units: X and Z axes controlled by CNC - 2.1 slide units: X and Z axes controlled by CNC - 2.2 slide units: X and Z axes controlled by CNC - 3.1 slide units: X and Z axes controlled by CNC - 3.2 slide units: X and Z axes controlled by CNC - 4.1 slide units: X and Z axes controlled by CNC - 4.2 slide units: X and Z axes controlled by CNC - 5.1 slide units: X and Z axes controlled by CNC - 5.2 slide units: X and Z axes controlled by CNC - 6.1 Slide units: X and Z axes controlled by CNC - 6.2 slide units: X and Z axes controlled by CNC - 7.1 Slide units: X and Z axes controlled by CNC - 7.2 slide units: X and Z axes controlled by CNC - 8.1 slide units: CNC-controlled swivel axes and Z-axes - 8.2 slide units: X and Z axis controlled by CNC - 1 set of draw collet holders - 1 bar loading magazine IEMCA SIR MS 22.8/33/F bundle with drilling station - 1 synchronous spindle in SL 8.1 with flushing and ejector as well as jaw chuck - Back drilling station for 3 fixed tools in SL 7.1 or 8.2 - 1 workpiece removal through a chute in SL 8 with a conveyor belt within the machine - 1 preparation for air/oil lubrication for drive devices - 1 electrical preparation, double module for SL 1,2,3 and 4 with electronic shaft - 1 electrical preparation, double module for SL 5,6,7 and 4 with electronic shaft - 1 flap for suction - UNICOOL EA interface - UNIMESS interface - 16 freely programmable inputs and outputs - CO2 fire extinguishing system - Hinged belt conveyor - High pressure pump 80 bar Crjb Hl Rorn Uxfjggob - Preparation for central cooling water supply - 6 double holders - 6 base plates - 1 catch - 2 The engine