Condition: new, The machine frames of the RSM series are characterized by a heavy design and long, supporting guideways. The table can be swiveled and the finely adjustable hydraulic feed moves smoothly in the longitudinal direction. A large scale ring on the handwheel of the X-axis facilitates precise infeed and the zero stop guarantees compliance with the desired dimension. The standard position indicator with linear scales is used to check the actual values. The headstock is rotated 180 degrees for internal grinding. An extensive accessory package is standard. Doboncdx Ejvaym Tsut

Year of construction: 1998, Condition: reconditioned (used), Machine is in very good condition. Capacity, Ø mm / 90 x 5 radius, min./max. / 50/400 Bending Rate/Repeatability / 40º/s. ±0.1° Mandrel length 4 000 Weight, kg 10 000 Machine dimensions 6.7 x 1.7 x 1.8 Engine kW / 40 Length feed 900 mm/sec Dusbvaysh I Dtwsm Tst Tolerance degree 0.05-0.1°/mm Tools: 48.3-50-57-88.9mm

Condition: good (used), Technical data: - Center height 220 mm - Turning diameter over bed 440 mm - Center height over bridge 330 mm - Turning diameter in the offset 630 mm - Center height / turning diameter over support 135 / 270 mm - Center distance 1000 mm Dsbvaymoqff D Io Tjut - Spindle bore 52 mm - Taper of the tailstock quill MK 4 - Travel of the tailstock quill 310 mm - 18 spindle speeds 25 - 2000 rpm - feeds longitudinal + plane - metric thread / Withworth thread / modular thread / DP thread - Drive 400 V / 6 kW - 4-jaw chuck with interchangeable jaws and center point, new Multifix size B with 3 inserts

Year of construction: 2020, Condition: ready for operation (used), General Data Measurements width 1785 mm Measurements depth 3035 mm Measurements height 1715 mm Machine weight 4050 kg Control Unit Brand FANUC Main Drive Spindle speed range 3500 rpm Spindle motor power 15/11 kW Spindle bore 86 mm Movement X-Axis Movement 255 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 790 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm over bed 651 mm Additional Equipment Coolant tank capacity: 160 liters Tail Stock Tailstock travel: 775 mm Tailstock quill diameter: 80 mm Tailstock quill travel: 120 mm Morse taper: MT4 This DOOSAN LYNX 300M was manufactured in 2020. It features a maximum swing over bed of 651 mm, turning diameter of 461 mm, and a turning length of 712 mm. The main spindle supports speeds up to 3,500 rpm with a spindle bore of 86 mm. It includes a 12-position turret and rapid traverse rates of 24/30 m/min in X- & Z-axes. Consider the opportunity to buy this DOOSAN LYNX 300M horizontal turning machine. Contact us for more information. Located in Denmark. Djbev Tfk Ajvaym Teut Application Types Turning

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 Dsbswgan Uovaym Tsut 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: excellent (used), Year of construction: 1999, CNC Control: MSD-501II (FANUC 18i-T) X-axis mm: 210 Z-axis mm: 550 Y-axis mm: - Maximum Turning Diameter mm: 250 C-axis Increment: 0.001 Maximum Turning Length: 500 Cutting Feed mm / min X, Z, Y: - Travel over Bed mm: Ø Travel over Carriage mm: Ø Bar Pitch mm: Ø 51 Duebjwf E Anovaym Tst Max Rapid Traverse m / min X,Z: 18.24 Main Spindle 6" Spindle Speed rpm: 4,000 Spindle Power kW: 7.5 Torque Nm: - Spindle Bore: - Main Spindle Nose A2-6 Sub-Spindle Spindle Speed rpm: 4,000 Spindle Power kW: 7.5 Torque Nm: - Sub-Spindle Bore mm 41 Sub-Spindle Nose A2-5 Turret Positions 12 Number of Live Tool Stations 12 Live Tool Speed rpm: 3,000 Live Tool Power kW: 5.5 EQUIPMENT Chip Extractor Bar Loader 10-65 Bar Loader Interface Manuals Included Basic Fixed Tool Holder Equipment 1 x Axial and 1 x Radial Power Tools

Condition: used, Year of construction: 1999, suction capacity: 5,600 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which results in high efficiency of the device. Sinbran filter cartridges. SINBRAN filter cartridges are environmentally friendly and therefore suitable for use in the pharmaceutical and food industries. They are suitable for separating aerosols of organic materials, such as those created during laser cutting operations. SINBRAN filter cartridges combine the advantages of membrane filters with the advantages of rigid body filters: Large filter surface requiring minimal space. High mechanical load capacity, very long life cycle, low pressure drop and high filtration efficiency is a new approach to dust removal that achieves impressive filtration results, even in particularly difficult applications. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters it causes minimal pressure loss. Short compressed air pulses during the filtration process ensure effective filter cleaning. 7.5 Kw fan Efficiency 5600 m3/h Sinbran filter inserts 12 pcs. Negative pressure 3000 Pa Djbvayjvxtkzjm Teut

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, bending angle: 182 °, bending radius: 400 mm, total length: 7,000 mm, total height: 1,800 mm, total width: 2,200 mm, thorn length: 4,000 mm, overall weight: 16,000 kg, pipe diameter: 127 mm, type of input current: three-phase, wall thickness: 5 mm, feed length Z-axis: 4,000 mm, motor voltage: 400 V, Equipment: documentation/manual, Capacity, Ø mm / 127 x 5 Radius, min./max. / 50/400 Debvsu Rf E Eeaym Tout Bending speed/repeatability / 40º/s. ±0,1° Mandrel length 4 000 Weight, kg 16 000 Motor kW / 40 Length feed 900 mm/sec Degree of tolerance 0.05-0.1°/mm Tools: 63 mm

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, Dujbvayjwhylvsm Tjt 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: excellent (used), Fasti hand guillotine shears type 505 - 10 - 2 1060 x 2.0 mm Dujbvaymswgylae Tet

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs EUR 118,436.00) Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 rpm bore capacity in steel 60 mm max.drill diameter 60 - 300 mm spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Debswgagdjvaym Tout Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: used, Year of construction: 2023, tank 1.300 l Dsbvayewgd I Esm Teut Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: used, Year of construction: 2007, suction capacity: 3,300 m³/h, negative pressure: 3,500 Pa, Dust extraction, welding fume extraction by Keller. For collecting and separating dust, such as fine particles of metal oxides and fumes generated in thermal processes such as joining, separation or surface treatment using laser, plasma or gases. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, soda blasting, grinding plaster, cement, plastics and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Fan with a power of 5.5 kW. Capacity 3300 m3/h Negative pressure 3500 Pa Inlet diameter - 400 mm Electrical documentation included. Dimensions of the device: height - 3.30 m Debvayevxt Elem Tout total width - 1.35m x 1.15m stock number: 0953

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: A0051, laser power: 2,000 W, Year of manufacture 2005 Laser power 2000 W Working area 3000 x 1250 mm Control Siemens Sinumerik 840D Complete with integrated automatic loading/unloading system STANDARD EQUIPMENT: Automatic pallet changer Quick change laser cutting head with 5" lens Quick change laser cutting head with 7.5" lens Automatic sheet position detection system Programmable cutting gas selection and pressure Conveyor belt for small parts/waste Work area lighting Positioning laser diode Oil spray device Autolas plus Hi-Las Automatic shutdown function TFT color screen RJ45 network connection Dobvaymovclz Hj Tsut Multi-chamber extraction system Dust extractor Cooler Light barrier safety system The resonator was replaced in 2007 and Trumpf installed a UV light beam ignition amplifier installed.

Condition: good (used), Doosan Model S 550L CNC Lathe Year 2006 Control Fanuc 21T Djbvaymjwhyklo Tjut Swing over bed 710.0 mm Max turning dia 550.0 mm Max turning length 1130.0 mm Chuck dia 400.0 mm Spindle bore 102.0 mm Spindle nose 6 mt Spindle speed 30 – 2500 rpm Spindle motor power 22 kw Turret 12 stations, Feeds 0.001 – 133 mm/rev Rapid X 20m/min Z 24m/min Bar capacity 90.0 mm Tailstock Swarf conveyor Steady Rest Manuals

Condition: like new (used), Year of construction: 2009, Metal circular saw Berg + Schmid VKS 370 HA 2 built in 2009 with stop + roller conveyor 2 cutting speeds 30 + 60 rpm Dujbowgykpevaym Tet

Year of construction: 1988, Condition: good (used), Chamber furnace, hardening furnace, tempering furnace, muffle furnace, nitriding furnace, chamber furnace, annealing furnace, annealing and hardening furnace -Manufacturer: Nabertherm, hardening furnace type N60/H -Program control: STANGE type SE-402 -Usable space: 400/420/H390 mm -Heating power: 10 kW -Nominal temperature: 1340°C -Individual components: see photos -Transport dimensions: 950/1070/H860 mm -Weight: 290 kg Dobvayjvrivasm Tsut

Condition: used, Year of construction: 2022, tank 1.300 l Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Dobvaymswgd Ixe Tjut Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Dobvov Raatoaym Tsut Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P

Condition: good (used), Drill, drill press, pillar drill, pillar drill -Table size: 275 x 215 mm -Spindle mount: MK3 -Projection: 280 mm -Speeds: 200-1450 rpm -Columns: Ø 120 mm -Spindle stroke: 100 mm -Translation via: Gears -Number: 1x drilling machines available -Price per piece Djbvayjkw H D Rom Tsut -Dimensions: 360/600/H1945 mm -Weight: 230kg

Condition: used, Year of construction: 2023, tank 1.300 l Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW Dusbvaymowgd Iro Tjt - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: excellent (used), Year of construction: 2018, operating hours: 2,284 h, - Shuttle table - IPG 4kW fiber laser - Camera monitoring inside the machine - Cooling system, lubrication system and extraction system - Acceleration 1.5G - Format support DXF, PLT, AI, Gerber etc - Position accuracy X/Y axes ±0.015 mm - Repeat accuracy X/Y axis ±0.015 mm - X/Y axis Max. Max. movement speed 140 m/min - Maximum table load 1000 kg Emission time 2284 hours (Laserhead working time) Maximum CW power 4133 W New laser head 2021 MACHINE DATA Item number 118544 Capacity 4 kW X-axis movement 2000 mm Y-axis movement 4000 mm Djbvaymjrxrr Ne Teut Z-axis movement: 315 mm Maximum sheet size 4000 x 2000 mm Year of construction 2018

Condition: used, Year of construction: 2022, tank 1.300 l Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors Dusbvswgd Ilsaym Tjt - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, WE Flexmaster 400 laser welding machine Year of manufacture: 2010 Laser unit TruDisk 3302, Trumpf company Dobvaymsv Ipcfs Tout Cooling unit P805-17640, Termotek company Material: black sheet metal and stainless steel sheet Sheet thickness: 0.6 - 2.0 mm Pipe diameter: 80 - 600 mm Pipe length: 100 - 1250 mm

Condition: reconditioned (used), Year of construction: 2007, Amada LC-3015 X1 NT - Deflection type (X/Y axis): Flying optics - Travel (X): 3100 mm - Travel (Y): 1550mm - Vertical movement (Z): 120 mm - Cutting speed: 0-30 m/min - Travel speeds: (X and Y axis) 85 m/min, (Z axis) 25 m/min - Position Tolerance: (X/Y axis): 0.005mm/500mm, (Z axis): 0.1mm/100mm - Maximum workpiece dimensions: (L x W x H) 3150 x 1525 x 19 mm - Maximum weight allowance: 690 kg - Maximum steel thickness: 20 mm - Maximum thickness of stainless steel: 15 mm (oxygen cut),12 mm (clean cut) - Maximum aluminum thickness: 12 mm - Number of pallets (pallet changer): 2 pcs. - Pallet change time: approx. 25 seconds - Dimensions of the laser cutting machine: (L x W x H) 6670 x 3260 x 2100 mm - Dimensions pallet changer: (L x W x H) 3430 x 2310 x 850 mm Dobjh I Dtpovaym Tsut - Laser cutting machine weight: 9900 kg - Pallet changer weight: 1800 kg - Power supply: (machine + resonator) 71 KVA - Controller: LC20BP2 laser resonator - Manufacturer: MITSUBISHI - Model: ML40CFX - Nominal power: 4 kW - Stability: +/- 1% - Maximum power: 5 kW - Frequency range: 10 - 3000 Hz - Laser type: C02 laser - Operating hours: discharge 23,000h - Total mirror revision recently done