Condition: excellent (used), Year of construction: 2006, Here we offer a maintained injection molding machine. from the following machine we have other machines of the same type in stock with Geiger Robot Manufacturer Engel Type Victory 200/80 Tech year of construction: 2006 Control system: CC 200 Extras - installed Language: German Englisch - enlarged clamping plates (B-plates) - minimum installation height 250 mm - maximum plate distance 700 mm - quality switch / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs - handling interface Euromap 12 - host computer interface Engel EMS - without material hopper or conveying unit Clamping unit clamping force: 80 to./ 800 kN tie bar dimension: tie bar-less clamping platens: 730 x 600 (hxv) platen distance: 700 mm max installation height: 250 mm min. opening stroke: 450 mm Injection unit screw diameter 25 mm Cgjbjlc R Tdj Hn N Syot stroke volume: 69 ccm injection pressure: 2090 bar / 2400 increased Weight: 5,200 kg. Dimensions: 4,00 mtr. x 1,40 mtr. x 2,00 mtr LxWxH - available immediately in our warehouse Hanover free loading or free delivery against freight reimbursement - function tested (guaranteed function until first start-up)

Condition: good (used), Year of construction: 1997, Ref. no.: 18552 Hersteller: BOY Type: 22 M Year of construction: 1997 Clamping unit Clamping force: 22 ton Opening stroke: 200 mm Distance between tie bars: 254 mm Mould height min.: 200 mm Mould height max.: 400 mm Platen size (h x v): 425 x 400 mm Cgsbjwgp Dfe Hn N Syot Injection unit Screw diameter: 28 mm Injection volume: 49 cm³ Shot weight: 44 g Injection pressure: 1069 bar Measurements and weight Dimensions: 2.3 x 0.81 x 1.63 m Machine weight: 760 kg

Condition: excellent (used), Year of construction: 2008, We sell a complete injection unit Engel 60 mm with heating bands etc. as seen on photos was mounted on an Cgjb Hnspbv E As N Syjt Engel Victory 1050 /180 machine fit on Victory from 160 until 220 tons (very little used only as exchange screw for a small series production)

Condition: good (used), Year of construction: 2017, Ref. no.: 18542 Hersteller: ENGEL Type: Victory 500/110 tech Year of construction: 2017 Clamping unit Clamping force: 110 ton Opening stroke: 500 mm Mould height min.: 300 mm Opening width: 800 mm Platen size (h x v): 740 x 680 mm Injection unit Screw diameter: 40 mm Injection volume: 251 cm³ Shot weight: 225 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,9 x 1,5 x 2,0 m Machine weight: 7,4 kg Cgeb Hnewgp A Uo N Syet Additional information & extras Core pull: 4 pcs Air valve: 1 pcs Robot Producer: Sepro Type: S5-15 Year: 2016 Weight: 430 kg

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, Functionality: fully functional, Top machine from clean room production (pharmacy) - with turntable 820 mm - with GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - only 33,107 operating hours - Protective housing/ protective cage - Horizontal conveyor belt - hardly any paint damage / almost new condition - fully functional The machine can be inspected under power by arrangement Technical data Manufacturer Engel Type V 330H/80V/130 Combi Serial number 162036 Year of manufacture 2006 Operating hours 33107 h Dimensions L/W/H see drawing Weight 10600 kg Functionality full Condition excellent Special Control unit CC 200 Screw ⌀ 25 / 22 mm Injection weight 72/ 35 gr. Injection pressure 2391/ 2066 bar Injection volume 79 / 38 ccm Clamping force 1300 kN/ 130 to. Tie bar spacing: tie barless Ejector stroke/force 61 kN/ 100 mm Hydraulic clamping unit Motor power follows Heating power follows Total output follows The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras Turntable (820 mm diameter) Geku Robot SR 500 ST Protective housing / protective cage CC 200 German English language GEKU Robot details SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Cobeub Umqe Hn N Sysgt Guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing - On request - Hire purchase option Price on request

Condition: good (used), Year of construction: 2011, Ref. no.: 18496 Hersteller: ARBURG Type: 570 C 200-800 Golden Edition Year of construction: 2011 Clamping unit Clamping force: 200 ton Opening stroke: 520 mm Distance between tie bars: 570 X570 mm Mould height min.: 300 mm Opening width: 950 mm Csbswgp Aus Hn N Sysgt Platen size (h x v): 795 X795 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 291 g Injection pressure: 2470 bar Measurements and weight Dimensions: 5,6 X 1,8 X 2,3 m Machine weight: 7450 kg

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 199107, Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 720S 3200-2100 Control unit: Selogica Year of manufacture: 2005 Special feature/Condition Pump was changed new hydraulic motor in 2019 injection unit sealed in 2019 constant maintenance by the manufacturer and previous owner Extras 2 x core pull robot interface machine data sheet is available on request - complete documentation and software available - German language - from first owner - origin Germany clamping unit clamping force: 3200 kN /320 to. tie bar distance: 720 x 720 mm platen size h: 1040 mm x 1040 mm Installation height min.: 300 mm Installation height max.: 700 mm platen distance max.: 1400 mm opening stroke: 700 mm ejector stroke: 250 mm Ejector force: 100 kN centering moving platen D: 165 mm centering fixed platen D: 165 mm mold weight: 3600 kg Injection unit screw diameter: 70 mm injection weight in polysterol: 984 g/PS Cjbelc R Rxj Hn N Sysgt available immediately from our warehouse in Hanover/German or free domicile against freight reimbursement the machine is offered functionally tested the machine is in our sole ownership the requested machine is available immediately in our warehouse Hannover and is offered functionally tested and can be inspected under power.

Condition: good (used), Year of construction: 2010, Ref. no.: 18482 Hersteller: KRAUSS MAFFEI Type: KM 300 / 2000 CX Year of construction: 2010 Clamping unit Clamping force: 300 ton Opening stroke: 820 mm Distance between tie bars: 810 X 720 mm Mould height min.: 480 mm Opening width: 1300 mm Injection unit Screw diameter: 60 mm Injection volume: 792 cm³ Shot weight: 720 g Injection pressure: 2420 bar Csb Hnjwgp Anj N Syegt Measurements and weight Dimensions: 6,7 X 2,1 X 2,4 m Machine weight: 16400 kg Additional information & extras Accumulator: 1 pcs Robot Producer: Krauss Maffei Type: KM LRX S 250 Year: 2010

Condition: like new (used), Year of construction: 2008, operating hours: 40,376 h, Functionality: fully functional, screw diameter: 25 mm, displacement volume: 59 cm³, injection weight: 54 g, Equipment: documentation/manual, Manufacturer: Arburg Type: 320C 500-170 Serial number: 208575 Year of manufacture: 2008 Operating hours: 40,376 h Fully functional Condition: very well maintained Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) Cgob Hn Notzqz Sj Syot German language - From first owner - Made in Germany Constant maintenance by the manufacturer and previous owner Selogica control system Injection unit Screw diameter: 25 mm Injection weight: 54 g/PS Injection pressure: 2500 bar Injection volume: 59 cc Clamping unit Clamping force: 50 t/500 kN Tiebar spacing: 320 x 320 mm Clamping platens: 446 x 446 mm Mold height: 200 mm Maximum spacing between platens: 550 mm mm Ejector travel/force 125 mm / 30 kN Clamping unit hydraulic Motor power 11 KW Heating power 9.4 KW Total power 21 KW The machine is immediately available from our warehouse in Hanover, Germany, and has been tested. Dimensions L/W/H 3.12 x 1.43 x 1.99 Weight 2300 kg Warranty Warranty until first commissioning Loading/Shipping Free loading onto the buyer's truck or carriage paid against freight reimbursement Available from our warehouse in Hanover, Germany Information about the machines we offer and our company - We only sell machines purchased from our own production from our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - we are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course. - All machines offered can be viewed in our warehouse.

Condition: good (used), Year of construction: 2004, Ref. no.: 18481 Hersteller: ARBURG Type: 320 C 600 – 250 Year of construction: 2004 Clamping unit Clamping force: 60 ton Opening stroke: 350 mm Distance between tie bars: 320 X 320 mm Mould height min.: 200 mm Platen size (h x v): 446 X 446 mm Cgjb Hn N Sewgp Ahoyst Injection unit Screw diameter: 25 mm Injection volume: 45 cm³ Shot weight: 40 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 X 1,5 X 1,7 m Machine weight: 2330 kg

Condition: like new (used), Year of construction: 2014, operating hours: 57,492 h, Functionality: fully functional, machine/vehicle number: 227349, clamping force: 400 kN, screw diameter: 18 mm, clearance between the columns: 270 mm, displacement volume: 23 cm³, injection weight: 21 g, Equipment: documentation/manual, Manufacturer: Arburg Type: 270C 400-70 Control unit: Selogica Year of manufacture: 2014 Operating hours: 57,492 h Machine number: 227349 Extras - Robot interface - Highly wear-resistant screw - Separation gate - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Continuous maintenance by the manufacturer and previous owner Clamping unit Clamping force: 400 kN / 40 t Tie-bar spacing: 270 x 270 mm Clamping platens: 446 x 446 mm Opening stroke: 350 mm Mold height: 200 mm min. Distance between platens max. 550 mm Ejector stroke: 125 mm Ejector force: 30 kN max. Injection unit Screw diameter: 18 mm Injection volume: 23 cc Shot weight: 21 g Injection pressure: 2500 bar Electrical system Pump: 11 kW Heating: 4 zones, 4 kW Installed power: 15 kW Pre-fuse: 50 A Weight: 2150 kg Warranty Warranty until first commissioning Cgsb Hnev U Uhgs N Syot Loading/Shipping Free loading onto the buyer's truck or carriage paid for Available from our warehouse in Hanover, Germany +++++ We have an additional 6 machines of this machine type with the same equipment in stock+++++ All prices are negotiable. 07 Arburg 270C 400-70 v. 2008 No. 208574 - 72,967 h - €10,000 Handling interface: - Screw 18 mm 06 Arburg 270C 400-70 v. 2011 No. 215701 - 61,134 h - €14,000 Handling interface: - Screw 18 mm 05 Arburg 270C 400-70 v. 2007 No. 215701 203129 - 89,470 h - €8,000 Handling interface: - 18 mm screw 04 Arburg 270C 400-70 v. 2014 No. 227349 - 57,492 h - €16,900 Handling interface: - 18 mm screw 03 Arburg 270C 400-70 v. 2010 No. 213142 - 78,394 h - €11,000 Handling interface: - 18 mm screw 02 Arburg 270C 400-70 v. 2010 No. 213141 - 75,942 h - €10,000 Handling interface: - 18 mm screw Information about the machines we offer and our company - We only sell machines purchased from our own production facility from our Hanover warehouse - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be inspected in our warehouse

Condition: good (used), Year of construction: 1995, Ref. no.: 18439 Hersteller: MOTAN Cgob Hnowgpz Rj N Syet Type: LA8-200 Year of construction: 1995 Further information: These are 15 drying hoppers with a capacity of 60L each. The conveying devices on them are included in the scope of delivery. Additionally, the two vacuum generators, the two central dryers, and the main control unit are also included.

Condition: excellent (used), Year of construction: 2003, operating hours: 20,092 h, Functionality: fully functional, machine/vehicle number: 190332, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras Cgjb Hn N Ssgrzh Eoyet 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: good (used), Year of construction: 2001, Ref. no.: 18404 Hersteller: ARBURG Type: 420C-1300-350 Year of construction: 2001 Cgjb Hjwgpzkjn N Syst Clamping unit Clamping force: 130 ton Opening stroke: 500 mm Distance between tie bars: 420 x420 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 605 x 605 mm Injection unit Screw diameter: 45 mm Injection volume: 230 cm³ Shot weight: 210 g Injection pressure: 1670 bar Measurements and weight Dimensions: 4,68 x 1,3 x 2,2 m Machine weight: 5100 kg Additional information & extras Core pull: 1 pcs

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, Functionality: fully functional, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Cgsbjubamvs Hn N Syot Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing On request - installment plan option Price: On request

Condition: good (used), Year of construction: 2008, Ref. no.: 18383 Hersteller: DEMAG Type: Systec 420-2300 NC5 Year of construction: 2008 Clamping unit Clamping force: 420 ton Opening stroke: 770 mm Distance between tie bars: 820 X 820 mm Mould height min.: 380 mm Csbewgpzdo Hn N Syegt Mould height max.: 825 mm Platen size (h x v): 1200 X 1100 mm Injection unit Screw diameter: 60 mm Injection volume: 890 cm³ Shot weight: 810 g Injection pressure: 2420 bar Measurements and weight Dimensions: 8,2 X 2,2 X 2,4 m Machine weight: 22300 kg Additional information & extras Core pull: 4 pcs Air valve: 7 pcs Hot runner systems: 8 pcs.

Condition: excellent (used), Year of construction: 2004, Here we offer a very well maintained constantly serviced injection molding machine. complete maintenance by manufacturer until current Injection molding machine: Manufacturer / Type: Krauss-Maffei KM80 220 C2 Serial No.: 61006272 year of construction: 2004 Control system: MC4 Clamping unit clamping force: 800 kN /80 tons tie bar distance: 405 x 405 mm Mold installation height min.: 250 mm platen distance max.: 750 mm Clamping platens standard: 610 x 610 mm ejector stroke: 150 mm core pull: 1x pcs. Injection unit Injection unit / cylinder ø30 mm Shot weight max. (ø30):: 77g/hp Injection flow: 73cm³/sec Spec. injection pressure: 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & Weights Weight with control cabinet: 3,8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine available now in our warehouse Cgobsh Dr E Ts Hn N Syst free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: good (used), Year of construction: 1997, Ref. no.: 18368 Cgeb Hn N Sewgpy Heyet Hersteller: ARBURG Type: 320 S 500-150 Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 320 X 320 mm Mould height min.: 300 mm Mould height max.: 550 mm Platen size (h x v): 446 X 446 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 75 g Injection pressure: 2200 bar Measurements and weight Dimensions: 3,25 x 1.15 x 2,0 m Machine weight: 2250 kg

Condition: like new (used), Year of construction: 2006, operating hours: 50,332 h, Functionality: fully functional, machine/vehicle number: 200943, clamping force: 1,000 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection weight: 97 g, Manufacturer: Arburg Type: 420C 1000-290 Year of manufacture: 2006 Machine No. 200943 Cgsbov U T Nce Hn N Syjt Control system: Selogica Operating hours: 50,332 h Clamping unit Clamping force: 1000 kN/100 t Tie bar spacing: 420 x 420 mm Mold clamping platens: 570 x 570 mm Ejector travel: 175 mm max. Opening travel: 500 mm Mold installation height: 250 mm Clamping platen spacing: 750 mm max. Injection unit Screw diameter: 30 mm Injection volume: 106 cc Injection weight: 97 g/PS Injection pressure: 2500 bar Extras Handling interface Hardened screw Weight/Dimensions 4.14 x 1.60 x 2.08 mtr. (L x W x H) Weight: 3650 kg Connected load: 80 A Warranty Warranty until first use Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our warehouse in Hanover, Germany Information about the machines we offer and our company - We only sell machines purchased from our own ongoing production from our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be inspected in our warehouse

Condition: good (used), Year of construction: 1998, Ref. no.: 18333 Hersteller: DEMAG Type: 330-1450 NC4 Year of construction: 1998 Clamping unit Clamping force: 330 ton Opening stroke: 675 mm Distance between tie bars: 710 x 630 mm Mould height min.: 330 mm Mould height max.: 710 mm Platen size (h x v): 1040 X 950 mm Injection unit Cjb Hnowgpymo N Syegt Screw diameter: 50 mm Injection volume: 530 cm³ Shot weight: 480 g Injection pressure: 2426 bar Measurements and weight Dimensions: 6,5 X 2,0 X 2,3 m Machine weight: 14300 kg

Condition: like new (used), Year of construction: 2007, operating hours: 47,800 h, Functionality: fully functional, machine/vehicle number: 203241, Used injection molding machine - New screw with original Arburg Multilift H The machine has a complete history with all major repairs and component replacements such as the screw, cylinder, etc. (In addition, the annual oil and filter changes, etc., were of course performed.) See document for download Manufacturer: Arburg Type: 470C 1500-350 Cob Hn N Sovhb Iysyjgt Year of manufacture: December 2007 Machine No. 203241 Control: Selogica Operating hours: 47,800 h Continuous maintenance by manufacturer Clamping unit Clamping force: 1500 kN/150 tons Tie-bar spacing: 470 x 470 mm Mold clamping platens: 650 x 650 mm Ejector stroke: 175 mm Opening stroke: 500 mm Mold installation height: 250 mm Clamping platen spacing: 750 mm max. Injection unit Injection volume: 145 cc Injection weight: 127 g Screw diameter: 35 mm Injection pressure: 2500 bar Extras Multilift H Handling interface Core puller - Available immediately from our Hanover warehouse, free on load or free to your door with freight reimbursement - Functionally tested (guaranteed functionality until first commissioning)

Condition: good (used), Year of construction: 2001, Ref. no.: 18331 Cgeb Hewgpygen N Syst Hersteller: ARBURG Type: 320 S 500-150 Year of construction: 2001 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 320 x 320 mm Mould height min.: 225 mm Opening width: 575 mm Platen size (h x v): 446 x446 mm Injection unit Screw diameter: 25 mm Injection volume: 54 cm³ Shot weight: 49 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 12 x 1,9 m Machine weight: 2250 kg

Condition: excellent (used), Year of construction: 2005, Here we offer a very well maintained constantly serviced injection molding machine complete maintenance by manufacturer until current Injection molding machine Krauss-Maffei KM 65-160 C2 Injection molding machine: Manufacturer / Type: Krauss-Maffei KM65 160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 complete annual maintenance by the manufacturer clamping unit: clamping force: 650kN /65 tons tie bar distance: 405 x 405mm mold installation height min.: 250mm platen distance max.: 750mm Clamping platens standard: 610 x 610mm ejector stroke: 150mm core pull: 1 x pcs. Injection unit Injection unit size / cylinder ø: 160 / cylinder ø25mm and cylinder ø18mm Shot weight max (ø25): 47g/PS Injection flow: 63cm³/sec Spec. injection pressure: max. 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & weights: Weight with control cabinet: 3.8 t Length: 3800mm Cob Hn N Ssh Dp R Eeysgt Width (machine only): 1050mm Height: 1890mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine is available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: good (used), Year of construction: 2003, Ref. no.: 18330 Hersteller: ARBURG Type: 320 S 500-150 /60 with turntable Year of construction: 2003 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 320 X 320 mm Mould height min.: 225 mm Mould height max.: 575 mm Platen size (h x v): 446 X 446 mm Injection unit Screw diameter: 25 + 15 mm Injection volume: 39 + 20 cm³ Shot weight: 35 + 18 g Injection pressure: 2210 bar Measurements and weight Dimensions: 3,5 X 1,2 x 1,9 m Cgsb Hn Nowgpyao Syst Machine weight: 2250 kg

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Hersteller: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Cgsb Hnjwgpx Ne N Syet Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009