Condition: good (used), Year of construction: 1997, Ref. no.: 18142 Hersteller: DEMAG Type: Ergotech pro 50-270 Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Mould height min.: 210 mm Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg Ceb Hjwgpx Aen N Syegt

Condition: ready for operation (used), Year of construction: 2006, operating hours: 77,000 h, Functionality: fully functional, clamping force: 5,000 kN, screw diameter: 100 mm, Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 137 kN Travel force movable platen closing 136 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95/48 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1411 bar Stroke volume 2411 ccm Shot weight (PS) 2194 gr. Injection rate 801 ccm/s Screw speed 189 1/min Plasticising rate max. 161 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,50 x 2,50 m Total machine weight 27090 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads - 2 x 8 fold water flow regulator Ceb Howgni Hjn N Syegt Additional Options: - 2 x hydr. core pull on movable plate - 2 x hydr. core pull on fix plate - Robot interface according to Euromap 12 - 16 x hotrunner controller - 1 x air valve on movable plate

Condition: excellent (used), Year of construction: 2021, ENGEL DUO 17060/2700 (2021) 🔧 Technical Specifications • Clamping force: 27,000 kN • Tie bar spacing (horizontal × vertical): 2,130 × 1,750 mm • Platen size: 2,970 × 2,640 mm • Mold height (min–max): 800 – 1,900 mm • Opening stroke: 3,100 mm • Max. distance between platens: 5,090 mm • Dry cycle (Euromap 6, 6 mm stroke): 5.8 s • Max. mold weight (fixed/moving platen): 50,000 kg each 🧩 Injection & Plasticizing Unit • Screw type: S4V G18 • Screw diameter: 150 mm • Injection volume: 10,780 cm³ • Injection pressure (max): 1,620 bar • Injection speed: 87 mm/s • Plasticizing rate (barrier screw): 235 g/s • Screw speed: up to 115 rpm 🔩 Nozzle & Ejector • Nozzle stroke: 1,300 mm • Nozzle contact force: 210 kN • Ejector stroke: 400 mm • Ejector force: 385 kN Cjb Hewd Sywjn N Syjgt ⚙️ Drive & Power • Main motors installed power: 192 kW • Reload pump motor: 16 kW • Oil reservoir capacity: 1,600 liters • Main power: 3×400V, N+PE / 50 Hz ➕ Additional Features & Configuration • T-slot platen with ejector back confirmation • Locating ring Ø 120 mm • Sprue bush “R”: 19 mm • Hydraulic corepull 2+2, air valve 1+1 • Mold heating control with 144 zones (24pin, K-type) • Valve gate interface with 36 zones (16pin DC24V) • Abrasion/corrosion-resistant screw barrel • Servo hydraulic drive • Oil maintenance system • UPS (AVR) backup unit • Robot interface EM67 • Cooling circuit: 1” inlet, 2 zones per platen (90°) • Autoclamp system for fast mold changes

Year of construction: 2004, Condition: ready for operation (used), Capacity: 50kg, max. operating temperature: 400°C, heating capacity: 3kW, insulation thickness: 80mm, diameter: 710mm, height: 1175mm, weight: 75kg. Documentation available. On-site inspection is possible. Cgsb Hnjwg E Dnj N Syot

Year of construction: 2018, Condition: like new (used), Functionality: fully functional, Manufacturer: Piovan Type: Aquatech CH50 Year of manufacture: 2018 Power rating: 4.1 kW Ceb Hswc I S Ten N Syjgt Cooling capacity: 7 kW Refrigerant: R407C Unit practically unused - like new!

Condition: ready for operation (used), Year of construction: 2003, operating hours: 33,063 h, Functionality: fully functional, clamping force: 220 kN, screw diameter: 22 mm, injection pressure: 1,732 bar, injection weight: 27 g, Newly refurbished, we have this BOY 22D. The machine is a compact 22 tonne clamp machine with a very easy to use controller with the Dipronic system. These machines have stood the test of time and remain very popular as they are simple to use, cheap to repair and reliable. Fitted with a 22mm diameter screw, which gives a max shot weight PS (g) of 27. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Cgob Hnswak Edo N Syot

Condition: good (used), Year of construction: 2006, Ref. no.: 18140 Hersteller: BATTENFELD Type: 25/50 Unilog B2 Year of construction: 2006 Clamping unit Clamping force: 25 ton Opening stroke: 450 mm Distance between tie bars: 270 X 270 mm Mould height min.: 150 mm Injection unit Screw diameter: 14 mm Injection volume: 15 cm³ Shot weight: 7 g Injection pressure: 2650 bar Measurements and weight Dimensions: 2,25 X 0,90 X 1,30 m Machine weight: 1100 kg Cgeb Hn N Sowgpxveyet

Condition: used, Year of construction: 2004, operating hours: 63,107 h, Functionality: fully functional, machine/vehicle number: 61004849, clamping force: 125 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, injection weight: 142 g, mold height (min.): 300 mm, overall weight: 6,000 kg, Equipment: documentation/manual, We are offering our Krauss Maffei KM125-390 C2 for sale. The machine has been replaced. Until the replacement, it was in continuous operation in our production facility. If you are interested in arranging a viewing, please contact us. We may require some lead time to reconnect the machine to the power supply. If you would like a viewing without the power supply, we are happy to arrange a short appointment. Cgjb Hn N Sov Rbpvsyjt If you are interested, we can also send you a short video of the machine in operation.

Condition: good (used), Year of construction: 2006, Model: HM 210/1000 S Clamping force: 210 t Distance between tie bars: 630 x 570 mm Mould height: 300 mm Daylight max. : 1050 mm Csbou Ekbhe Hn N Syogt Screw diameter: 50 mm Injection pressure: 2016 bar Injection volume: 491 cm3 Shot weight: 440 g Transport parameters: weight 10000 kg, L x W x H: 5000 x 1700 x 2300 mm Controll: Unilog B4 Videos on request.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,630 h, Functionality: fully functional, laser power: 60 W, working range: 1,330 mm, Equipment: documentation/manual, safety light barrier, For sale is a Zünd Eurolaser M-1200 with 1,630 operating hours and a camera system. We purchased the system in 2014 and have unfortunately not produced enough since then, so we want to sell it. The system is fully functional and can be tested on-site. Operating hours: approx. 1,630 hours Working area (W x L): 1,330 mm x 1,230 mm Dimensions (W x L x H): 2,730 mm x 2,010 mm x 1,600 mm Laser power: 60 watts Synrad Laser source: CO2 Speed: 1 - 1,414 mm/s (in 1 mm increments) Acceleration: max. 14.1 m/s² Cgsb Hn N Sowg Tb Usyot Including 2 x Teka extraction systems Accessories Black anodized grid plate with extraction holes / Acrylic surface with extraction holes Gray cutting mats, 2.5 mm Focus lens including lens holder, 1 x 7.5 / 1 x 5.0 Laserscout Position plus (LS-POS+ Crea) camera system for reading registration marks Universal module UM-S for recording Cutting, grooving, and milling tools UCT cutting tool including spring shoe and 2 knife holders Various knives for UCT Optiscout 7.0 software for production and design including computer System is located at ground level and has easy access to the loading yard. Disassembly and transport must be organized by the customer.

Condition: good (used), Year of construction: 1998, operating hours: 65,000 h, clamping force: 3,300 kN, screw diameter: 70 mm, clearance between the columns: 710 mm, displacement volume: 1,039 cm³, injection pressure: 1,400 bar, injection weight: 940 g, DEMAG ERGOTECH 330 T injection molding machine in good condition Reference: Ergotech E330-1450-NC4S Cjb Hn N Sowcq A Usyjgt Year: 1998 65,000 operating hours Screw diameter: 70 mm L/D ratio: 20 Injectable volume: 1039 cm3 Injectable weight in PS: 940 g Injection pressure: 1400 bar Maximum dosing stroke: 270 mm Heating power: 27 kW Plate dimensions: 1040 x 950 mm Distance between columns: 710 x 630 mm Mold thickness: 330 - 710 mm Maximum opening stroke: 675 mm + SEPRO robot type 3031 YN MPA II X axis: 2500 mm Y axis: 800 mm Z axis: 1400 mm Machine dimensions: 6.50 x 2.00 x 2.30 m Machine weight: 14,300 kg

Condition: used, Year of construction: 2008, Functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, displacement volume: 156 cm³, injection pressure: 2,180 bar, injection weight: 139 g, With Robotsystem Cgeb Hnewgc R Sj N Syjt

Condition: good (used), Year of construction: 2006, Ref. no.: 18138 Hersteller: DEMAG Type: IntElect 80-370-100 NC 4 All electric Year of construction: 2006 Clamping unit Clamping force: 80 ton Opening stroke: 850 mm Distance between tie bars: 370 X 370 mm Mould height min.: 200 mm Mould height max.: 510 mm Platen size (h x v): 600 x 600 mm Injection unit Cgsb Hn N Sewgpxpjyjt Screw diameter: 22 mm Injection volume: 37 cm³ Shot weight: 32 g Injection pressure: 2580 bar Measurements and weight Dimensions: 4,50 X 1,28 X 1,95 m Machine weight: 4750 kg

Year of construction: 1999, Condition: ready for operation (used), General Data Machine weight 61900 kg This DEMAG Ergotech 10000-8000 was manufactured in 1999. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing tasks. Consider the opportunity to buy this DEMAG Ergotech 10000-8000 hydraulic injection moulding machine. Contact us for more information. Ceb Hn N Sowchxasysgt Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 620 mm, displacement volume: 156 cm³, injection pressure: 2,180 bar, injection weight: 139 g, With Robotsystems Cgob Hn Nswgcx Aj Syot

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Hersteller: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Cgjb Hjwgpxion N Syet Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 20,000 h, General Data Machine weight 6500 kg Control Unit Brand ENGEL Main Drive Spindle motor power 92 kW Injection Unit Screw diameter 60 mm Stroke volume 315 mm Injection pressure 2400 bar Screw speed 220 min-1 Nozzle pressure 2400 bar Clamping Unit Clamping force 6500 kN Opening stroke 1400 mm Distance between bars 1100x960 mm Mould height min 350 mm Mould height max 850 mm Size of mold platens 1510x1440 mm Ejector stroke 250 mm Ceb Hnswchw Ao N Sysgt Ejector force for / back 95 kN Additional Equipment Oil Reservoir Capacity - Injection Unit: 500 l Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool Water Consumption (32°C): 4.80 m3/h General Data Machine weight 6500 kg Control Unit Brand ENGEL Main Drive Spindle motor power 92 kW Injection Unit Screw diameter 60 mm Stroke volume 315 mm Injection pressure 2400 bar Screw speed 220 min-1 Nozzle pressure 2400 bar Clamping Unit Clamping force 6500 kN Opening stroke 1400 mm Distance between bars 1100x960 mm Mould height min 350 mm Mould height max 850 mm Size of mold platens 1510x1440 mm Ejector stroke 250 mm Ejector force for / back 95 kN Additional Equipment Oil Reservoir Capacity - Injection Unit: 500 l Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool Water Consumption (32°C): 4.80 m3/h This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 2008, operating hours: 75,000 h, Functionality: fully functional, clamping force: 2,800 kN, screw diameter: 45 mm, clearance between the columns: 630 mm, displacement volume: 368 cm³, injection pressure: 2,402 bar, injection weight: 320 g, opening stroke: 675 mm, plate width: 950 mm, plate height: 950 mm, installation height: 710 mm, total length: 6,620 mm, total width: 1,920 mm, total height: 2,250 mm, overall weight: 13,000 kg, Core pull 2-fold, 6-fold cascade, with robot Cgsb Hswgcmgsn N Syot

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Hersteller: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Cjbowgpxcs Hn N Sysgt Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg

Condition: good (used), Year of construction: 2011, Ref. no.: 17514 Hersteller: BILLION Type: H 80-50 Select Year of construction: 2011 Clamping unit Clamping force: 50 ton Opening stroke: 250 mm Distance between tie bars: 350 x 300 mm Mould height min.: 150 mm Mould height max.: 400 mm Platen size (h x v): 490 x 440 mm Injection unit Screw diameter: 25 mm Injection volume: 39 cm³ Shot weight: 35 g Injection pressure: 2040 bar Measurements and weight Dimensions: 3,7 x 1,4 x 1,8 m Machine weight: 3200 kg Additional information & extras Hot runner systems: 6 pcs. Csb Hnjwgpw Ss N Syogt

Condition: good (used), Year of construction: 1998, Ref. no.: 17507 Hersteller: DEMAG Type: ERGOtech system 800-310 Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Cobjwgpw Eo Hn N Syegt Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg

Condition: good (used), Year of construction: 2008, Ref. no.: 171 Hersteller: ENGEL Type: VC 1050H/200W/200V(TOP4)/400 Combi-WP 6K Cgobswgpwxj Hn N Syst Year of construction: 2008 Clamping unit Clamping force: 400 ton Opening width: 1008 mm Platen size (h x v): 1300 x 1460 mm Injection unit Screw diameter: 50 mm Injection volume: 422 cm³ Shot weight: 0 g Injection pressure: 2322 + 00 + + + + bar Measurements and weight Machine weight: 22000 + 6600 kg Dimensions LxWxH part 1: 5 x 2,3 x m Dimensions LxWxH part 2: 3,9 x 2,3 x m

Condition: good (used), Year of construction: 2008, Ref. no.: 17147 Hersteller: ENGEL Type: VC 1050H/200W/200V(TOP4)/400 Combi-WP 5K Year of construction: 2008 Clamping unit Clamping force: 400 ton Opening stroke: 1008 mm Platen size (h x v): 1360 x 1460 mm Injection unit Screw diameter: 60 mm Cgjb Hn N Sewgpwroyot Injection volume: 608 cm³ Shot weight: 7 g Injection pressure: 17 + + + + bar Measurements and weight Machine weight: 22.000 + 6.600 kg Dimensions LxWxH part 1: 5 x 2,3 x m Dimensions LxWxH part 2: 3,9 x 2,3 x m

Condition: good (used), Year of construction: 2004, Ref. no.: 17146 Hersteller: ENGEL Type: ES 750H/80W/(500V)/300HL-2F Year of construction: 2004 Clamping unit Ceb Hnjwgpwls N Syogt Clamping force: 300 ton Opening stroke: 855 mm Injection unit Screw diameter: 50 + 25 mm Injection volume: 393 + 49 cm³ Shot weight: 354 + 44 g Injection pressure: 1917 + 1586 bar Measurements and weight Dimensions: 6,5 x 2,3 x m Machine weight: 21000 kg

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Hersteller: BATTENFELD Cgob Hn N Sewgpwfeyjt Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg