Condition: excellent (used), Year of construction: 2008, operating hours: 58,000 h, Functionality: fully functional, clamping force: 100 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 20 bar, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 100 mm, overall weight: 3,900 kg, Hello dear customers, We have great cleanroom machines in our program again. Here we offer this Engel e Max cleanroom machine from 2008. This machine is equipped with a GEKU SR 500 ST linear robot. The machine has run almost 58,000 pump hours in automatic mode. The machine comes from a well-known manufacturer in the pharmaceutical industry, so the machine, including handling, was subject to very strict maintenance management and is in the very best condition for its age. There is hardly any damage to the paintwork. I would be happy to send you further information and make you an offer. I look forward to your inquiry. With sunny greetings Dslikst A Ufwoh Ugscg Nick Schönfeld

Condition: excellent (used), Year of construction: 2000, Demag Ergotech 350-115 viva Closing 35 tons Dcjlikhjwgdhls Ugsg Year of manufacture 2000 Scrow 25mm Pls sprue picker

Condition: refurbished (used), Year of construction: 2009, Equipment: documentation/manual, Sumitomo Demag IntElect 160/520-1000 NC 5 Year of manufacture: 2009 Control / Programming: NC 5 Screw: 50 mm Injection volume: 442 cc / 393 g Clamping force 1600 kN Tiebar spacing 520 mm x 520 mm Mold height min 275 mm – 585 mm Plate spacing max. 1080 mm Mold opening stroke 495 mm Ejector stroke 120 mm Core pull 2x Plug ejector plate safeguarding Equipment: 2-circuit core pull in series with mold movement (1x fixed platen + 1x movable platen) Ejector parallel to mold movement Clamping force controlled Freely programmable inputs and outputs (4 inputs/4 outputs) (for 5/2-way pneumatic valve) Switch-on/shutdown program (with spraying) Interface for Handling, Euromap 67 (50-pin) Interface for mold protection (ejector plate protection) Integrated hot runner control, 2 zones Mold protection Intruding Plug combination for electrical connection, Change journal, PDE control, graphic MWE1 + MWE2 graphic Dcjlikh Ujwd Afkogog

Condition: excellent (used), Year of construction: 2006, Technical Specifications Year of manufacture: 2006 Clamping side Clamping force: 8000 kN Maximum clamping platen: 1520 mm Clearance between tie bars: 1170 mm Min. installation height: 700 mm Max. installation height: 1300 mm Max. distance between platens: 2300 mm Opening stroke/max. installation height: 1000 mm Ejector stroke: 300 mm 1st injection side Screw diameter: 105 mm Displacement: 4160 cc 2nd injection side Screw diameter: 90 mm Displacement: 3050 cc Technical Specifications Clamping side Clamping force: 8000 kN Maximum clamping platen: 1520 mm Clearance between tie bars: 1170 mm Min. installation height: 700 mm Installation height Max.: 1300 mm Max. platen spacing: 2300 mm Max. opening stroke/installation height: 1000 mm Dslikh Uewdxd Asgscg Ejector stroke: 300 mm 1st injection side Screw diameter: 105 mm Displacement: 4160 cc 2nd injection side Screw diameter: 90 mm Displacement: 3050 cc

Condition: like new (used), Year of construction: 2019, operating hours: 283 h, machine/vehicle number: 4450, Automatic double winder ADW 1200R T - manufactured by GRAEWE, DE - used machine, tested and ready for use - for pipe/hose diameter 2 - 6 mm - core diameter 595 mm or 450 mm - outer diameter 1135 mm or 750 mm - winding height 270 mm or 150 mm - for cardboard spool Total width 170 mm * Winding width 158 mm Dcjlietzb Naekh Ugog - extrusion speed up to 250 m/min - automatic winder with 2 winding stations * 1 winding station in working position 1 winding station in preparation position * Automatic stop and change of winding stations after reaching a programmed after reaching a programmed part/winding length - incl. length measuring system 1 coil removal trolley * for easier removal of the coil from the winder 1 tube accumulator * free-standing between the required haul-off and winder

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, 3x VE20 Microbond SCI 3x New The parts have been in operation for approximately 200-300 hours. Dcolikhjr Rdd Ne Ugjg The MICROBOND CSI system, consisting of a feed unit, control system, and high-performance generator, guarantees consistent welding quality. Robust yet highly precise mechanics enable constant gap control thanks to the patented MicrogapControl gap control system. The MICROBOND control system controls and visualizes this continuous joining process. Constant amplitude output and high continuous sound power enable process speeds of up to 800 m/min.

Condition: excellent (used), Functionality: fully functional, Equipment: documentation/manual, Dear customers, We are offering an automation system with very high-quality built-in components and robots. We are sure that some of you may need these parts and we will find a fair price for everyone. Djlisu Rqm Uokh Ugscg With best regards Nick Schönfeld

Condition: excellent (used), Year of construction: 1993, Demag Delikowgdd Tjh Ugjcg Ergotech 200-50 Compact Closing 50 tons Scrow 30mm Hole spacing 35.5x35.5

Condition: good (used), Functionality: fully functional, overall weight: 200 kg, Labotek dryer Type: DDM 60 ALB Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW Dolijvrubnokh Ugecg

Condition: excellent (used), Year of construction: 2007, operating hours: 59,000 h, Technical Specifications Dcjliowdw E Sekh Ugeg Year of manufacture: 2007 Clamping side Clamping force: 13,000 kN Opening stroke/max. installation height: 2,300 mm Max. distance between clamping platens: 4,000 mm Min./max. mold installation height: 1,000 - 1,700 mm Max. clamping platen height: 1,910 mm Min. mold size: 1,020 x 820 mm Clearance between tie bars: 1,500 mm Nozzle radius: R40 mm Mold weight: 29,000 kg Ejector stroke: 350 mm 1st injection side Screw diameter: 120 mm Displacement: 6,786 cc 2nd injection side Screw diameter: 105 mm Displacement: 5,195 cc NC5 control system Core pulls AWS/DS: 1/1

Condition: used, Year of construction: 1988, machine/vehicle number: M8046, Foam cutting machine / circular splitter for PUR flexible foams or block foams. Djlikovzzwnsh Ugjcg

Condition: excellent (used), Year of construction: 2008, Ferromatik Milacron Type: K-TEC 85-S Injection molding machine (85 tons) Serial number: 522500 Year of production: 2008 Machine weight: 5500 kg Delikovk Dbzsh Ugjcg Screw diameter: 25 mm Closing force: 850 kN Working hours: 24.386h.

Condition: new, Year of construction: 2024, Functionality: fully functional, clamping force: 500 kN, screw diameter: 32 mm, injection weight: 69 g, overall weight: 2,430 kg, Dear Customers, For sale is a brand new BOY 50 E injection molding machine from 2024 – an absolute highlight for your production and available immediately!!! Due to a project pause, we are offering this machine with a silicone unit for sale. BOY will commission the entire system this week, week 14, and a video of the commissioning will be posted online afterwards. All further technical data can be found on my machine trading website. Best regards, Nick Schönfeld Dcsliksv T Uuwjh Ugog

Condition: good (used), Year of construction: 1998, Tempering unit Mrke: Single Dcolsfcy Drjikh Ugog Type:STW 1-6-25- ZN FY CA 1998

Condition: good (used), Functionality: fully functional, Labotek dryer Type: DDM 120 ALB Power: 8.9 kW Dcjliovtxmwjkh Ugog Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW

Condition: excellent (used), Functionality: fully functional, Camoga C420 R Surface splitting machine, skinning machine, splitting machine Working area: 420mm Has automatic knife approach Two material feed speeds Material feeding on two rollers top and bottom Machine equipped with a display of the thickness of the split material Dust absorber, strong suction system and waste basket Machine in perfect technical condition after full service Possibility of shipping on a pallet Camoga C420 R Surface splitting machine, skinning machine, splitting machine Djliewf Rwqjkh Ugecg Working area: 420mm Has automatic knife approach Two material feed speeds Material feeding on two rollers, top and bottom Machine equipped with a display of the thickness of the split material Dust absorber, strong suction system and waste basket Machine in perfect technical condition after full service Possibility of shipping on a pallet Camoga C420 R Flächenspaltmaschine, Enthäutungsmaschine, Spaltmaschine, Lederteilmaschine Arbeitsbereich: 420 mm Es verfügt über einen automatischen Messerzugriff Zwei Materialvorschubgeschwindigkeiten Materialzufuhr auf zwei Ober- und Unterwalzen Die Maschine ist mit einer Anzeige der Dicke des geteilten Materials ausgestattet Staubsammler, leistungsstarkes Saugsystem und Abfallbehälter Die Maschine ist nach der Vollwartung in einem technisch einwandfreien Zustand. Möglichkeit des Versands auf einer Palette

Condition: good (used), Year of construction: 2007, operating hours: 71,303 h, Functionality: fully functional, machine/vehicle number: 1634.., clamping force: 7,500 kN, screw diameter: 90 mm, injection weight: 2,850 g, plate length: 1,250 mm, plate width: 925 mm, Equipment: documentation/manual, This angel is in very good condition. One bar can be pulled out to better fit the shape. Dceljvta Ntjikh Ugog

Condition: excellent (used), Year of construction: 1991, Arburg 270M-500-210 Dcelikhewgc Epe Ugjg Closing 50 tons Scrow 40 mm Injection softened 188 cm3

Condition: good (used), Functionality: fully functional, overall weight: 200 kg, power: 8.9 kW (12.10 HP), Labotek dryer Type: DDM 120 ALB Dcslikevrubhjh Ugsg Power: 8.9 kW Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW

Condition: excellent (used), Year of construction: 2011, operating hours: 74,000 h, Functionality: fully functional, clamping force: 1,100 kN, screw diameter: 20 mm, Equipment: documentation/manual, Top Offer: Arburg 470S 170/70 2-Component Injection Molding Machine (2011) This reliable machine offers outstanding performance and versatility—perfect for demanding production requirements. Main Features: Condition: Well maintained and ready for use Mileage: 9.3 million cycles Operating hours: Manual operation: 74,500 hours Automatic operation: 70,000 hours Injection units: Horizontal: Ø 170 mm, max. 36.2 cm³ Vertical: Ø 70 mm, max. 21.4 cm³ Djliov Rf S Uekh Ugocg Technical Highlights: Opening stroke: 850 mm Electric indexing Integrated 15-zone hot runner 3 core pulls & 2 blow-out stations (including needle valve control) Additional functions: Multilift H (6 kg capacity) with: 2 vacuum connections 5 double-acting grippers Servo Z-axis (800 mm) Pneumatic control for C-, G-, X-, and B-axis Interfaces for ALS and temperature control units Included additional equipment: 2 Farrag Tech dryers (20S & 10S), compatible with dryer interfaces. This machine meets the highest requirements and is perfect for precise and efficient injection molding processes. Don't hesitate – For more information or to schedule a tour, contact us today.

Condition: excellent (used), Year of construction: 2002, Arburg 221K-350-100 Closing 35 tons Year of manufacture 2002 Deliowgc Drjkh Ugocg Scrow 25mm Injection soaked 49 cm3

Condition: good (used), Functionality: fully functional, overall weight: 200 kg, power: 9.5 kW (12.92 HP), Labotek dryer Type: DDM 120-S Power: 9.5 kW Dcelikhevrubbo Ugog Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW

Condition: good (used), Year of construction: 2006, Functionality: fully functional, clamping force: 2,600 kN, Equipment: documentation/manual, Dear Sir or Madam, This Engel is just arriving and is being sold on behalf of the customer from direct production. Delikhjvxkpne Ugscg The machine is of course thoroughly tested and cleaned before being switched off. The machine can be inspected on site under load. With sunny greetings Nick Schönfeld

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, overall weight: 10,600 kg, Hello dear customers, We have great cleanroom machines in our program again. Here we offer this Engel 2-component cleanroom machine from 2006. This machine can be purchased as a package with a GEKU SR 500 ST. A conveyor belt, protective cage and turntable are available as accessories. Dcolot A Ui Aeikh Ugog The machine has run just under 33107 hours in automatic mode. The machine comes from a well-known manufacturer in the pharmaceutical industry, so the machine including handling was subject to very strict maintenance management and is in the very best condition for its age. There is hardly any damage to the paintwork. I would be happy to send you further details and an offer. With best regards Nick Schönfeld

Condition: good (used), Year of construction: 2008, Functionality: fully functional, clamping force: 5,500 kN, screw diameter: 90 mm, clearance between the columns: 914 mm, column diameter: 155 mm, displacement volume: 2,480 cm³, Equipment: documentation/manual, Here we are offering a freshly arrived Engel CL 4550/550 built in 2008 Please ask for more information. Delikevw Ad Ujh Ugocg Regards, Nick Schönfeld