Condition: used, kW: 30 Rotor diameter: 500 mm Dcehx Dqwjwbt A Usmeg Rotor width: 1200 mm

Condition: good (used), Type Luxor LS80 Series No. 08 020 044/07 0135 Dcshx Dqewalxljwmsg Dry air quantity 80 m³ /h Connected load Max 10.2 kW Heating power 6.5 kW

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, WEGOMA SD25 with 500-grit saw blade BECKHOFF C2001 controller with pneumatic tilting. Fully functional Djhx Dswf I Igeqwmocg

Year of construction: 2014, operating hours: 59,121 h, Condition: ready for operation (used), Injection Unit Screw diameter 135 mm Stroke volume 8158 ccm Clamping Unit Dcehx Dqjwbla Eowmsg Opening stroke 1508 Mould height min 500 Mould height max 1008 Ejector stroke 300 Additional Equipment Robot V40 Access Platform Temperature Control Units (2 pieces each) Conveyor Belt Suction and Dosing Station by Koch This Engel Duo 11050/800 hydraulic injection moulding machine was manufactured in 2014. Consider the opportunity to buy this Engel Duo 11050/800 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: as good as new (ex-display), Year of construction: 2024, Pneumatic Glazing Bead Saw Type GLSP-200N-AV Pneumatic Automatic saw feeding Pneumatic work piece clamping Adjustable table height 2 x 45° motors Accessories: HM Saw blade 200 x 2.2 x 32mm HSS Saw blade 103 x 2.0 x 32mm Z=60/45° Right HSS Saw blades 103 x 2.0 x 32mm Z=60/45° Left Dcehx Deuydgoqwmog Glazing Bead Simulation- System With feed cylinder, 1 Revolver stop with 16 stops and 4 clamping cylinders Fixtures for 2 Glazing Beads, support And leg adjustable for simulation Exhaust support D=80mm

Year of construction: 2006, Condition: excellent (used), Spritz Clinder Bareire Dcshxod N Ak Ds Dqwmeg Bj ca2006 Long 130 cm Scrow 35 mm

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Dcjhx Dqswbt Auowmsg A total of four dryers of this model are available.

Year of construction: 1984, Condition: used, Plastic injection molding machine allrounder 170-90-200 horizontal and vertical swiveling Clamping force 200 KN Dehxemmbz Hs Dqwmocg Injection force 91 KN Total power 10,9 kw

Condition: excellent (used), Year of construction: 2014, Engel Duo 11050/800 Baujahr: 2014 Screw dia: 135mm Injection volume: 8158cm3 Dehx Dqewc Edyjwmscg Tie bar distance: 1170x 1000mm (HxV) Viper 40 robot

Condition: ready for operation (used), Year of construction: 2017, operating hours: 21,445 h, Control Unit Brand FANUC Injection Unit Screw diameter 32 mm Clamping Unit Clamping force 1250 KN Opening stroke 350 mm Size of mold platens 660 mm × 610 mm Additional Equipment Equipment: Robot Wittman W818 (2015) 8000 € extra Dcohevxbpxox Dqwmjg This FANUC α-S100A was manufactured in 2017. It is an electrical injection moulding machine, ideal for precision plastic parts production. Consider the opportunity to buy this FANUC α-S100A electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: reconditioned (used), Year of construction: 2004, operating hours: 35,000 h, Functionality: fully functional, clamping force: 2,600 kN, screw diameter: 60 mm, Engel Victory 1800/260 Tech Engel Horizontal Injection Molding Machine, 260 tons of closing force. Servo motor. CC100 control. Only 35,000 operating hours. Extras: Engel ERC 53/1-E robot + safety grille. 60mm intermediate plate. The injection molding machine is delivered reconditioned by our expert technical team and in optimal working condition. We can offer our clients a commissioning service at their facilities, guaranteeing its operation. Dshewdvm Uox Dqwmocg Technical Details INJECTION PRESSURE 2361 (increased) PLATE DIMENSIONS 1100x1000mm SCREW 60mm INJECTION VOLUME 764cm3 CLAMPING POWER 2600kN OPENING STROKE 908mm WORKING HOURS 35,000 MINIMUM MOLD THICKNESS min 400/ max 900 YEAR OF MANUFACTURE 2004 MAXIMUM DISTANCE BETWEEN PLATES 1300mm

Condition: good (used), Year of construction: 1990, Netstal 1000/445HP Closing 100 TO Scrow 40mm Dcshx Dqjgi D Thowmog Stroke volume 44x44 Year 1990

Condition: used, Year of construction: 2004, Functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: DEMAG Typ: Concept 350/710-2300 Baujahr: 2004 Schließkraft 350 Tonnen Holmabsta 630 x 630 mm Dshxowa Trgs Dqwmjcg Einbauhöhe min.: 330 mm Öffnungsweg: 675 mm Schnecken DN: 55 mm Max. Hubvolumen: 890 cm³ Spritzteilgewicht: 800 g/PS Steuerung: NC4 Ausstattung: Ausstattung: Roboter, Hersteller: WITTMANN 2 St. Kernzüge Hochverschleißfeste Spritzeinheit Verfügbar ab 16. KW/2025

Condition: ready for operation (used), Year of construction: 1997, operating hours: 55,362 h, Functionality: fully functional, Twin screw extruder, conical Manufacturer: Cincinnati Milacron Type: Titan 45R-APC Year of manufacture: 1997 Operating hours: 55,362 hours Dcshxowfdqko Dqwmsg Screw geometry: conical for PVC-hard profiles Screw diameter: 45 - 88 mm Screw speed: max. approx. 45 1/min. Motor power: 20.1 kW, Drive motor: ABB direct current motor Cylinder heating/cooling zones: 3/2 (air cooling with fan) Adapter heating zones: 1 Mould heating zones: 5 Control: EXc+ (microprocessor control) Output: approx. 100 - 120 kg/h for PVC-hard profiles Dimensions: 2500 x 1300 x 180 mm without hopper (LxWxH) Weight: 2100 kg Note: The extruder is checked for function. The extruder is supplied without dosing, without material hopper and without vacuum pump.

Condition: like new (used), Year of construction: 2022, Engel duo 17060/2000 injection molding machine Year of production -2022 Robot viper 60 - RC300 integrated Z= 4280 mm X= 1800 mm Y= 2600 mm B9Wbl2Xapk Injection system Screw diameter mm 135 Screw pitch mm 610 Maximum injection capacity cm³ 8731 Screw speed min⁻¹ 125 Screw torque Nm 14000 Maximum screw speed at reduced torque min⁻¹ 135 Reduced torque at max. speed Nm 12963 Reduced screw speed at max. torque min⁻¹ 112 Maximum screw torque at reduced speed Nm 15630 Regeneration efficiency (3-zone screw) g/s 222.9 Regeneration efficiency (barrier screw) g/s 279.2 Injection Injection efficiency cm³/s 1904 Injection volume cm3 8731 Injection weight g 7860 Injection pressure (regeneration) bar 1648 Injection pressure (maximum) bar 2000 Nozzle Nozzle stroke mm 1100 Nozzle pressure force kN 210 Material cylinder L/D ratio - 25 Heating zones (including nozzle) - 8 Heating power kWel 88.5 Closing system Closing force kN 20000 Minimum closing force kN 2000 Opening force (with pressure cushion) kN 1600 Force opening kN 614 Opening stroke mm 3000 Max. distance between platens mm 3800 Dehowc A T Sox Dqwmjcg Min. mould height mm 800 Max. mould height mm 1800 Spacing between tie bars (h x v) mm x mm 2000 x 1600 Size of mould plates (h x v) mm x mm 2700 x 2430 Max. mould weight (moving platen) kg 41330 Max. mould weight (stationary platen) kg 41330 Max. total mould weight kg 62000 Dry cycle stroke (Euromap 6) mm 1400 Dry cycle time (Euromap 6) s 5.5 Ejector Ejector stroke mm 400 Ejector force kN 385 Drive Installed power of main motors kW 265 Capacity oil tank (injection unit) l 1600 Oil filter Max. cooling capacity (at 25°C) kWcool 43.2 Water consumption (at 25°C) m³/h 6.3

Year of construction: 2010, operating hours: 32,497 h, Condition: ready for operation (used), General Data Dcshx Djwcht Rjqwmsg Machine weight 8800 kg Additional Equipment 2 ejectors Vacuum pump This Kloeckner Desma 968.250 ZO was manufactured in 2010. A hydraulic injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Kloeckner Desma 968.250 ZO hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2004, 1x Arburg 820S 4000-2100 Ma-No. 195746 Year of construction: 10/2004 Core pulls: 2x Dcohxjwfr Dxo Dqwmsg Auger: 80mm incl. Multilift and safety fence

Condition: excellent (used), Year of construction: 2023, operating hours: 100 h, Functionality: fully functional, 2 component mixing unit Mixing ratio 100:100 800g/min Material tank 3L Dcjhx Dqewgciuswmjg Mixing gun

Condition: used, Year of construction: 2005, Hersteller: KRAUSS MAFFEI Typ: KM300-1400C2 Baujahr: 2005 Schließkraft 300 Tonnen Holmabsta 630 x 630 mm Dcohx Dqjvzqhvewmjg Einbauhöhe min.: 330 mm Öffnungsweg: 820 mm Schnecken DN: 45 mm Max. Hubvolumen: 373 cm³ Spritzteilgewicht: 335 g/PS Steuerung: MC3+ Ausstattung: 2 St. Kernzüge an BWAP Hochverschleißfeste Spritzeinheit Eine zweite zusätzliche Spritzeinheit DN 45 mm Innendruckmessung Kistler Verfügbar ab 16. KW/2025

Year of construction: 1994, operating hours: 32,303 h, Condition: reconditioned (used), Functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Dcehx Dqowfc Unowmjg Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function.

Condition: like new (used), Year of construction: 2019, FANUC ROBOSHOT S100iA FANUC ROBOSHOT ALPHA S100IA Operating hours: 10,839 hours Year of manufacture: 2019 100 tons Tiebar spacing: 460 x 410 mm Installation height: 520-220 mm Dohx Dqwewcx Rtjmocg 40 mm 3-zone screw Injection speed: 330 mm/s Injection stroke: 144 mm Ejector stroke: 120 mm

Year of construction: 1988, Condition: good (used), hydraulic clamp vertical adapters for parting line molding capability clamp tonnage 40 ton Platen size 346 x 346 mm Distance between tie bars: 220 x 220 mm Maximum open daylight: 475 mm Mold opening stroke: 275 mm Minimum mold height: 200 mm Hydraulic ejector force: 2 ton Hydraulic ejector stroke: 100 mm Screw diameter: 22 mm Shot size: 30 gram Optional screw-shot sizes: up to 30 mm Screw stroke: 95 mm Screw volume: 36 cm³ Djhx Dqsbqi Tbjwmecg Maximum injection pressure: 91 kN (18,200 psi) Screw speed range: 10-580 rpm (infinitely variable) Hydraulic oil required: 190 liters (50 gallons) Dry cycles: 2520 per hour Pump Motor: 11kW (15HP) Overall length x width: 3.3 x 1.1m Height w/inj unit vertical: 2.8 m Weight without oil: 1700 kgs

Year of construction: 2007, Condition: good (used), LABOTEK DDM4-120 Dry Air Dryer Dcohx Djwakwgsqwmeg Stock No.: 503563 Machine Type/ Equipment Type: Dry Air Dryer Manufacturer: LABOTEC Type: DDM4-120 Year of Manufacture: 2007 The DDM is a mobile dry air dryer designed for the continuous drying of free-flowing plastic materials in granular form. The DDM is supplied as a standard mobile unit and can be installed alongside the processing machine(s) that will be supplied with dried raw material. The DDM is supplied as a standard unit with automatic dry air material transport to one processing machine and can also be supplied with a transport system for two processing machines. The DDM is designed for the drying of hygroscopic and non-hygroscopic raw materials, including reclaimed material, in the temperature range between 60 and 140°C with a maximum deviation of +2/-2°C. DDM is also available in a HT/LT (high/low temperature) version, which dries in the temperature range of 50-180°C. Due to the highly precise temperature control and a dew point temperature of -30°C, a residual moisture content of less than 0.02% can be achieved. (HT/LT 0.002%) - Connected load: 9 kW - Tank volume: 120 liters - Heating capacity: 8 kW

Year of construction: 1996, Condition: good (used), Shredding system, twin-shaft shredder, 2-shaft shredder, shredder, chipper, cutting mill, twin-shaft crusher, rotor mill -Shredder system: equipped with 24 cutting blades -Engine power: 7.5 kW Dohx Djvbylwjqwmjcg -Speed: 28 rpm -Dimensions cutting blade: 250 x 19 mm -Filling nozzle 500 x 470 mm -Dimensions 650/1760/H470 mm -Weight 864 kg

Condition: good (used), Year of construction: 2011, VC 750H/330V/220 COMBI CC200 controll Clamping force: 220 t Screw diameter: 50 mm Screw dia 2: 35 mm Shot weight: 361 g Shot volume: 392 cm3 Dcjhev I Ul Esx Dqwmjg Type: Uni Drive: Hydraulic Possible to buy Wittmann 821 robot extra