Condition: excellent (used), Year of construction: 2006, Arburg 270 U 350-100U (2006) Universal machine / possible to use in horizontal, vertical position. Clamping force: 35 tons Distance between tie bars: 270 x 270 mm Platten dimensions: 380 x 380 mm Screw diameter: 25 mm Injection volume: 49 cm3 Shot weight (PS): 45 g Injection pressure: 2000 bar Equipment: Cores: 1+2 Heating zones: 3 Low hours: 54.000 Dsb Eovdu Dgjcgy Uskl

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 20 278, feed length X-axis: 2,400 mm, feed length Y-axis: 1,400 mm, feed length Z-axis: 800 mm, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 40 m/min, spindle speed (max.): 45,000 rpm, spindle speed (min.): 1,500 rpm, rapid traverse X-axis: 120 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 40 m/min, table width: 1,400 mm, table length: 2,400 mm, rotational speed (max.): 45,000 rpm, rotational speed (min.): 1,500 rpm, overall weight: 8,000 kg, input voltage: 380 V, Equipment: documentation/manual, rotational speed infinitely variable, Geiss FZ 200x1000 5-axis CNC milling machine Dsbev Tcwge Ecgy Uekl Linear motors in X and Y, spindle in Z, rotary axes B270° C560°, Ibag HF 100 spindle with 6/9 kW up to 45,000 rpm HSK32, 12-station tool changer, Siemens 840D control system with enhanced processing power for CAM programs, and dust-proof enclosure

Year of construction: 1992, Condition: ready for operation (used), An injection molding machine with two units Klöckner Ferromatik Desma GmbH, Windsor plant Maintal is available. Stroke volume: 2x30150cm³, clamping force: 40000kN, injection pressure: 1800bar, cooling water requirement: 2x18.1m³/h, total power requirement: 2x700kW. Weight clamping unit: 2x175t, weight injection unit: 2x50t, total system weight: 450t. On-site inspection is possible. Dsb Ecev T Aqaegy Ujkl

Condition: good (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 191523, clamping force: 490 kN, screw diameter: 30 mm, -KOM 3086- Offered here is a used injection molding machine. Technical specifications: Manufacturer: Engel Dksbsv Tb U Do Ecgy Uol Model: Victory 50 Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2013 Machine number: 191523 Screw diameter: 30 mm Tiebar spacing: Tiebarless Centering diameter: 125 mm

Year of construction: 2020, Condition: ready for operation (used), General Data Machine weight 28400 kg Additional Equipment The robot + auto line are not included. These PIOVAN accessories are included: Piovan Hot Air Dryer G35 / Piovan Suction Unit PF30 / 3x Piovan Temp Unit THW118-F (+1x brand new unused temperature unit) Deb Ecgovw Em Ssy Uekl This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. A robust plastic processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. It has a significant opening stroke of 900 mm and mold platens size of 1280 x 1280 mm. Consider the opportunity to buy this Arburg Allrounder 920H 5000-4600 plastic processing machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), 175 tons Year of manufacture 2003 12000kg Dobsv Edwxo Ecgy Uskl Quick change system

Condition: excellent (used), Year of construction: 2017, Engel DUO11050/1300 PRO (2017) Clamping force: 1300 ton Min/Max Mould: 700-1400mm Dksb Eev Inzgscgy Uol Platen size HxV: 2200x1990mm Tie bar distance: 1530x1275mm Screw dia: 120mm Injection volume: 6447 cm3

Condition: used, Year of construction: 2005, operating hours: 70,000 h, Functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Djb Ecsu Awalegy Ujkl Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Debev T An Se Ecgy Uokl

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 185724, clamping force: 490 kN, screw diameter: 30 mm, -KOM 3087- Offered here is a used injection molding machine. Technical specifications: Manufacturer: Engel Model: Victory 50 Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2012 Machine number: 185724 Screw diameter: 30 mm Tiebar spacing: Tiebarless Dob Ecov Tb Ttegy Ujkl Centering diameter: 125 mm

Year of construction: 2005, operating hours: 92,980 h, Condition: ready for operation (used), This Engel Victory 750/200 Tech hydraulic injection moulding machine was manufactured in 2005. Consider the opportunity to buy this Engel Victory 750/200 Tech hydraulic injection moulding machine. Contact us for more information. Dkob Ecgev Dym Hsy Ujl Application Types Injection Moulding

Condition: good (used), Year of construction: 1998, Functionality: fully functional, Engel ES 200 | 50 HL Debjv Abvgo Ecgy Uskl Always used in a school. Very low hours. Machine can be loaded.

Condition: like new (used), Year of construction: 2019, Clamping force: 50 t Min/Max mould height: 150-550mm Platen size HxV: 500x450mm Dkeb Ecevcxuajgy Uel Screw diameter: 30 mm Maximum injection capacity: 99cm3 Robot Engel ER-USP 5 Conveyor belt Material used: POM, PA low hours, very nice condition

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, clamping force: 6,500 kN, screw diameter: 90 mm, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1300 mm Mould height min 650 mm Max. daylight 1950 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 90 / 35 mm Ls/D ratio 18 / 23 Injection pressure 1445 / 2429 bar Stroke volume 1813 / 156 ccm Shot weight (PS) 1650 / 142 gr. Injection rate 649 / 123 ccm/s Screw speed 218 / 291 1/min Plasticising rate max. 137 / 22 g/s Dobev Stcws Ecgy Uekl Nozzle pressure 173 / 84 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 36 / 18,5 kW Adjustable barrel heating zones 7 / 5 Dimensions and weights: Dimensions of the machine ca. 8,70 x 5,10 x 2,60 m Total machine weight 35000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 48 x hotrunner controller - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Year of construction: 1996, Condition: ready for operation (used), Three Ferromatik Milacron injection molding machines are available. Output: 1x15kW/2x37kW, power consumption: approx. 136A, machine weight: approx. 38000kg. On-site inspection is possible. Dsbev T Ap Ne Ecgy Uokl

Condition: used, Functionality: fully functional, The hot runner device is for sale, it has 5 heating zones Dob Ecevxz Nfsgy Ujkl

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 1610 Measurements depth 5820 Measurements height 2010 Machine weight 8200 Injection Unit Screw diameter 60 mm Shot weight 651 g Stroke volume 715 cm^3 Injection pressure 1556 bar Clamping Unit Clamping force 2500 kn Opening stroke 1150 mm Distance between bars 580 x 580 mm Mould height max 600 mm Size of mold platens 860 x 860 mm Ejector stroke 160 mm Ejector force for / back 67 kn Djb Ecgjv Ezqcsy Ujkl Additional Equipment Equipped with a servo drive - energy saving energy 30-70% compared to a machine with a constant pump 2x sequences of core pullers EUROMAP 67 interface This INVERA Intec 250/1110 was manufactured in 2016. A hydraulic injection moulding machine featuring a screw diameter of 60 mm and a clamping force of 2500 kN. It supports a max mold weight of 850 kg and is equipped with a servo drive, offering energy savings of 30-70%. Ideal for efficient, high-quality molding operations. Contact us for more information about this machine. Application Types Injection Moulding

Condition: repair required (used), Functionality: not functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, For sale is an injection molding machine from the Arburg brand and the type 470 C 1600-800 The pump and a card have been removed from the machine, so the machine is being sold as defective. It is otherwise in very good condition Technical data: Pump hours: 61,400 Debev Edris Ecgy Ujkl Clamping force: 1600 kN Clear column spacing: 470*470 Ejector travel: 225 mm Screw diameter: 50 mm Displacement: 398 cm³ Dimensions: 4335*1635*1950 mm Weight: 6950 kg The machine is offered without peripherals Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit us on our website

Year of construction: 2023, Condition: like new (used), SEPRO Success 22X (2023) X = 2000mm Z = 1400 mm Dkeb Esv Ift Hecgy Uel Y = 700mm C axe : YES Payload : 10kg Vacuum circuid: 2x Pressure circuid: 2x

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Djb Eev Stbmecgy Uekl Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Year of construction: 2013, Condition: ready for operation (used), An Arburg injection molding machine including a handling interface is available. Clamping force: 800kN, min. mold installation height: 250mm, max. mold installation height: 550mm, distance between tie bars: 470mm/470mm, clamping platen diameter: 125mm, ejector stroke: 125mm, injection weight: 132g, screw diameter: 35mm, injection pressure: 2000bar, core pulls: 1, total power requirement: 45.5kW, weight: approx. 4600kg. Documentation available. On-site inspection is possible. Dksb Ecjv Tny Tegy Uol

Condition: like new (used), Functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION Dob Esg Ailcscgy Uskl The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 39,626 h, General Data Machine weight 11600 kg Deb Ecgyjvyl R Aj Uokl Injection Unit Screw diameter 50 mm Shot weight 361 g Injection pressure 392 cm³ Clamping Unit Clamping force 2200 kN This Engel Victory 750H/330V/220 combi was manufactured in 2011. It's a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Engel Victory 750H/330V/220 combi. Contact us for more information. Application Types Injection Moulding

Year of construction: 2016, Condition: ready for operation (used), An Arburg injection molding machine including handling is available. Clamping force: 4000kN, opening stroke: 700mm, min. mold installation height: 350mm, distance between tie bars: 820mm/820mm, clamping platen diameter: 160mm, ejector stroke: 250mm, injection weight: 1078g, screw diameter: 70mm, injection pressure: 2000bar, core pulls: 2, total power requirement: 124kW. Documentation available. On-site inspection is possible. Debsv Tny Hj Ecgy Uokl

Year of construction: 2008, Condition: ready for operation (used), Two similar Battenfeld injection molding machines are available, each with a core pull. 1) Battenfeld HM 1000/750, year of manufacture: 2004, tie bars: 4, clamping force: 1000kN, opening stroke: 500mm, hole spacing extension: by 300mm, min. mold installation height: 250mm, tie bar spacing: 520mm/470mm, clamping table diameter: 125mm, ejector stroke: 150mm, heating capacity: 14kW, injection weight: 400g, screw diameter: 45mm, injection pressure: 2100bar, total output: 36kW, machine weight: approx. 4600kg. Handling included. 2) Battenfeld HM 1000/750, year of manufacture: 2008, tie bars: 4, clamping force: 1000kN, opening stroke: 500mm, min. mold installation height: 250mm, tie bar distance: 470mm/420mm, clamping table diameter: 125mm, ejector stroke: 150mm, heating power: 14kW, injection weight: 500g, screw diameter: 50mm, injection pressure: 1714bar, total power: 36kW, machine weight: approx. 4600kg. Documentation available. On-site inspection is possible. Dksb Ecgysv Tnzdj Uel