Condition: excellent (used), Year of construction: 1999, Angel ES 1800/350 HLClosing 350 TO (up to 400TO)Year 1999Scrow 60 mm Debed Sym Eo Ey Hkbekl

Year of construction: 1998, Condition: ready for operation (used), Two injection molding machines are available. 1) Battenfeld BA 2700/1200 BK, year of manufacture: 1998, clamping force: 2700kN, platen dimensions X/Y: 900mm/1020mm, tie bar distance X/Y: 630mm/630mm, opening stroke: 550mm, mold height min./max.: 250mm/620mm, max. platen distance: 1170mm, ejector stroke: 160mm. Screw diameter: 55mm, L/D ratio: 22, injection pressure: 1305bar, stroke volume: 913cm³, injection weight: 830g. Machine dimensions X/Y/Z: approx. 6800mm/1900mm/3400mm, weight: approx. 12000kg, control: Unilog 4000, operating hours: approx. 40759h. The machine exhibits faults when switching over. 2) Engel ES 200/45 HLS, year of construction: 1998, clamping force: 45t, platen dimensions X/Y: 550mm/430mm, min. installation height: 180mm, platen distance: 530mm, opening stroke: 350mm, ejector stroke: 100mm. Screw diameter: 25mm, stroke volume: 99cm³, injection pressure: 1400bar, L/D ratio: 20, screw stroke: 140mm. Machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 3300kg, operating hours: 74165h. The machine has slight leaks in the hydraulics. Documentation available. On-site inspection is possible. Individual sale possible. Dsb Eov Sufasy Hkbskl

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder BH45-30D with barrier screw and mixing section. Dkeb Ejuxa Aboy Hkbel 45mm extruder with 30L/D screw length The extruder is equipped with a new control system function-tested Several extruders of the same type available !

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Control: CC100 Condition: fully funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Injection pressure: 2090 bar Djb Ey Hotrhv Sekbokl Weight: 5400 kg Pump drive power: 15 kW

Condition: used, Year of construction: 2017, overall weight: 100 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Dkeb Ey Hksuuu Szobsl

Condition: good (used), Year of construction: 1998, Closing force 600 ton Dobsv Enwve Ey Hkbjkl Screw diameter 80 mm Weight approx. 31 ton Control EC 100 Including handling robot ERC 63 Machine can be inspected under power

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350BJ 2003Sleisskraft 130 TOScrow 40 mmOperating hours 77890 hHolmenabstand 42x42 Djb Eyed Tnbhs Hkbekl

Condition: ready for operation (used), Year of construction: 2008, Demag System 800/1120-9500 injection molding machine Year of production - 2008 Closing system: Closing force: 8000 kN Plate size (h x v): 1620 x 1500 mm Gap between columns (h x v): 1120 x 1000 Mold height min-max.: 500 - 1050 mm Maximum distance between plates: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mold weight: 7200 kg Injection system: Dsbev T A Hho Ey Hkbskl Screw diameter: 130 mm Stroke volume: 7300 ccm Injection weight (PS): 6640 gr Injection pressure: 1300 bar Screw length: 20 l/d Electric-hydraulic equipment: Pump motor rated power [kW] 110 Heater power [kW] 79 Oil tank capacity (L): 1300 Dimensions and weight: Machine dimensions LxWxH: 12.3 m x 2.7 m x 2.7 m Total weight: 33500 / 9700 kg

Condition: good (used), screw-barrel unit complete ( Plastification unit ) Dksb Ey Hok Ivgyskbol used screw-barrel unit EE1190 in 70mm Diameter Shot weight 775g / 865cm³ This unit is complete with Head, Nozzle, a new screw-tip and with Heating ribbons. For DEMAG D250, D275, D300, D325-1190 NC III and NC II

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, clamping force: 600 kN, screw diameter: 30 mm, Operating hours approx. 65,000 h Screw diameter 30 mm - wear-resistant Column spacing 370 x 320 mm Dkjb Ey Hjv A Szyjkbsl 1 core pull, air valve, 5 x hot runner system

Condition: used, Year of construction: 2013, operating hours: 33,000 h, clamping force: 55 kN, screw diameter: 32 mm, displacement volume: 965 cm³, injection pressure: 2,127 bar, overall weight: 2,300 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Manufacturer: BOY Type: BOY 55E Condition: technisch überarbeitet Operating hours: ca. 33.000 CLAMPING UNIT: - Clamping force: 55 t Öffnungsweg: 400 mm Mould installation height min.: 250 mm Mould installation height max.: - Tie bar distance (h x v): 360 x 335 mm Plate dimension (h x v): - Centering (fix- movingplate): - INJECTION UNIT: IU205 Screw diameter: 32 mm Injection weight in polystyrol: 92,3 g Stroke volume: 96,5 cm³ Einspritzdruck: 2.127 bar CONTROL: PROCAN ALPHA Screen language: DE / EN / IT / ES Operating manuel: DE EQUIPMENT: - Core pulls: - Air valves: 1x (Steuerung) Dkob Ey Hkjtug Thebsl Hot runner control devices: - Robot interface: Euromap 67 GENERAL DATA: - Installed heating capacity: 7,7 kW Pump drive power: 11,0 kW Total installed power: 18,7 kW Total weight: 2.300 kg Total size L x B x H: 3,5 x 1,2 x 2,1 m

Year of construction: 2017, Condition: good (used), Used Xtrutech Extruder XTS 24 for sale. The extruder is fully functional and was used in the powder coating sector with many spare parts. Dkjb Eyevcynuo Hkbol

Condition: excellent (used), Year of construction: 2001, Conveyor U. Dosing unitsBrand: A. TschritterType: WC 100BJ 2001 Djbsd Twgce Ey Hkbskl

Condition: ready for operation (used), Year of construction: 2004, Krauss Maffei KM 2300 - 12000 MC injection molding machine Year: 2004 Controller version: MC 4 Number of operating hours 93,900 Closing unit Clamping force: 23000 kN Mould opening force, max.: 1420 kN Moving platen feed force Opening: 227 kN Moving platen feed force Closing: 203 kN Mould platen size (h x v): 2830 mm x 2400 mm Distance between columns (h x v): 2000 mm x 1600 mm Mould opening stroke: 2600 mm Min. mould height: 1100 mm Max. mould height: 1800 mm Max. daylight: 3700 mm Hydraulic ejector - stroke: 350 mm Ejector force forward/backward: 415/115 kN Injection unit Screw diameter: 135 mm Ls/D ratio: 23 Injection pressure: 1389 bar Sweep volume: 8588 ccm Injection weight, PS: 7815 g Injection rate: 1019 ccm/s Screw speed: 113 1/min Maximum plasticization rate: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Nominal pump motor capacity: 132 kW Installed heating power: 997kW Adjustable barrel heating zones: 7 Number of drying cycles: 350 1/h Tank capacity: 2500 ltr. Dimensions and weight Dkeb Ey Hksv T Aw Tobol Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total machine weight: 143000 kg Maximum mold weight: 62000 kg LRX 1000 robot X-axis - 2000 mm Y-axis - 3000 mm Z-axis - 5000 mm

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Dob Eysrp Dyro Hkbskl PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, clamping force: 450 kN, screw diameter: 22 mm, Number of operating hours approx. 45,000 Screw diameter 22 mm 1 core pull Djb Ey Hksv A Sypjbokl Handling interface

Condition: used, Year of construction: 2006, overall weight: 150 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Arburg Type: 500 Condition: gebraucht ALLGEMEINE DATEN: - Total installed power: - Control: - Operating manuel: - Other equipment: Schwenkkran 500kg für A370 und A420 incl. Montagematerial und elektrischen Kettenzug. Total weight: 150 kg Total size L x B x H: 110 x 30 x 420 cm Dksbst Hzhyj Ey Hkbjl

Year of construction: 2006, operating hours: 15,000 h, Condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. Dkeb Eysumubye Hkbsl The system can be viewed during operation. A new extruder screw was installed in February.

Condition: excellent (used), Year of construction: 2000, Demag 150/500-840 Closing 150 TO PVC clinder Scrow 50 mm Sprayweighted 400 g Tie bars wide 50x50 FY 2000 Dkob Ey Hefp U Hnekbol

Condition: excellent (used), Woojin Plaimm TE50 IE 70 injection molding machine Year of production 2020 3 machines available Screw diameter fi 22 mm Injection pressure 2184 bar Injection volume 34 cm3 Dkob Ey Hkjv T Aghobol Spacing between columns 360 X 360 weight 3,600 kg dimensions 4.0x1.3x1.6 m

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Control SELOGICA mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm Dob Ey Hjvkqfajkbokl total power requirement 96 kW weight of the machine ca. 17 t dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Operating hours: 42878h

Year of construction: 2005, Condition: ready for operation (used), Injection Unit Screw diameter 100 mm Clamping Unit Opening stroke 950 mm Distance between bars 1020 x 1020 mm Additional Equipment Dkebev Ir Aze Ey Hkbol Core Valve: 1 Air Valves: 2 EU 12 for Robot Connection This Netstal S 6000-5500E hydraulic injection moulding machine was manufactured in 2005. It features a tie bar distance of 1020 x 1020 mm and an opening stroke of 950 mm. Equipped with 1 core valve, 2 air valves, and a screw diameter of 100 mm. It also includes an EU 12 connection for robot integration. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: used, Calzoni hydro motor 250bar MR350E Dkjb Esrr Efvoy Hkbel - removed from K-Tec 350 - S - removed from running machine - fully functional manufacturer: Calzoni type: MR350E sparepart no.: 10084268 manufacturer no.: MR350E-F2N1N1C1NX Dition: gebraucht

Year of construction: 2021, Condition: excellent (used), Wanner Xtra 2-A slow-speed mill with toothed roll 2015 - 2 pieces 2017 - 1 piece 2019 - 1 piece 2020 - 8 pieces 2021 - 8 pieces Technical data Cutting chamber opening: 260 x 260 mm² Dksb Eyev Tzz Re Hkbel Rotor knives: 3 pieces Pre-breaker: 2 pieces/3-notches Rotor speed: 32/min Tooth module: 4 mm, alternatively 5 mm Motor power: 1.5 kW Power supply voltage: 400 Volt/50 Hz Weight (Standard): 230 kg Dimensions (LxWxH cm): 99 x 40 x 110 Controller: Controller with contactor with 5 m cable

Year of construction: 2004, operating hours: 64,285 h, Condition: ready for operation (used), Injection Unit Screw diameter 100 mm Clamping Unit Dobjv Ir Aue Ey Hkbekl Opening stroke 950 mm Distance between bars 1020 x 1020 mm Additional Equipment Core Valve: 1 Air Valves: 2 EU 12 for Robot Connection: Yes This Netstal S 6000-5500E was manufactured in 2004. A hydraulic injection moulding machine featuring a tie bar distance of 1020 x 1020 mm and an opening stroke of 950 mm. Equipped with 1 core valve, 2 air valves, and a screw diameter of 100 mm. It also includes an EU 12 for robot connection. For more information about this hydraulic injection moulding machine, please reach out to us. Application Types Injection Moulding