Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, -Dekumed Unidos 300 TXMP 2K dosing mixing plant, Siemens Simatic PLC S7 control system, year of manufacture 2016, high-pressure gear pumps for epoxy resin and hardener, 2 stainless steel containers 400 L for epoxy resin adhesive and hardener, heating sleeves for both component containers, dosing mixing head, compressor, cable reel 70 m, control cabinet, boom 4 m swiveling, with plant mounted on steel frame, heavy-duty rollers, drawbar -Dekumed Unidos 300 TXMP Tr. supply for mixing system, year of construction 2016 Feed pumps for epoxy resin and hardener, pressure follower plate unit for 200 l containers, control cabinet, system mounted on steel frame with heavy-duty castors Plant was built in 2016 and put into operation in 2017 and only ran for 6 months Plant is dismantled, new price of the plant 235000€ De Isthdkhsa Srwyocg Plant is disassembled and prepared for transport, all machine documents and operating instructions are available

Year of construction: 2019, Condition: new, machine/vehicle number: BI3, Tempering furnace for stress relieving and forming acrylic glass The furnace has two doors on one side and 2 narrow doors with rail system on the back. The sheets are hung there and pneumatically clamped with foot switch and released again. - The oven has a maximum temperature of 230°C and a permanent deviation around the set temperature of +/-3°C at 75°C . - The internal dimensions are approx. width 1600 x depth 2000 mm. The height of the oven in the rail system can accommodate a 1800mm high free-hanging panel. - You can see the rail system on the attached pictures. The rail system can also be mounted on the front side. It can accommodate panel thicknesses from 1.5 to 25mm and can support a maximum panel weight of 150kg. - The power can be adjusted in several steps. - Air circulation approx. 3.000 m³/h Dcj Iasb Nzyce Srwyjg - doors can also be opened from the inside for safety reasons - Safety device which also switches off the heating in case of fan failure.

Condition: new, Year of construction: 2025, Functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: Dcj Ia Soq Nfuzjrwyog - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: good (used), Year of construction: 2003, Functionality: fully functional, screw diameter: 52 mm, type of input current: AC, input frequency: 50 Hz, Equipment: documentation/manual, NEGRI BOSSI 2700H-1450 injection molding machine from 2003 - Core control Dcs Iasv S Afhe Srwyeg - Air blower - Robot interface

Condition: like new (used), Year of construction: 2007, Arburg 470C 1500-800 Year of construction 06/2007 Control Selogica Operating hours: approx. 60,000h (pump) Screw diameter 70 mm Fuel weight: approx. /gr./hp Distance between tie bars 470 x 470mm Extras: Core pull Paint dispenser interface Handling interface Machine weight: 5500kg Do Ia Sjv Sd Taorwyocg incl. Arburg Multilift Year of construction 2007 X-200mm Z-1000mm

Year of construction: 2025, Condition: as good as new (ex-display), air-cooled process chiller: refrigerant R454B cooling capacity 72KW at 7/12°C, internal P3pump, internal 410l tank, winter package down to -25°C ambient temperature for outdoor installation includes speed controlled fans large Dixell display with protective cover, Ds Ia Sjf H A Eyerwyjcg

Condition: excellent (used), Year of construction: 1997, Demag Ergotech 150-440/610 Closing 150 TO NC 4 Scrow 40 mm BJ 1997 Tie bars distance 50x50 Lifting volumes 255 cm Spray-softened 230 g Dcs Iaod N Ux Dj Srwyjg

Year of construction: 2016, Condition: excellent (used), Functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. De Iaovbcbuo Srwyocg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Year of construction: 1998, Condition: ready for operation (used), Two injection molding machines are available. 1) Battenfeld BA 2700/1200 BK, year of manufacture: 1998, clamping force: 2700kN, platen dimensions X/Y: 900mm/1020mm, tie bar distance X/Y: 630mm/630mm, opening stroke: 550mm, mold height min./max.: 250mm/620mm, max. platen distance: 1170mm, ejector stroke: 160mm. Screw diameter: 55mm, L/D ratio: 22, injection pressure: 1305bar, stroke volume: 913cm³, injection weight: 830g. Machine dimensions X/Y/Z: approx. 6800mm/1900mm/3400mm, weight: approx. 12000kg, control: Unilog 4000, operating hours: approx. 40759h. The machine exhibits faults when switching over. 2) Engel ES 200/45 HLS, year of construction: 1998, clamping force: 45t, platen dimensions X/Y: 550mm/430mm, min. installation height: 180mm, platen distance: 530mm, opening stroke: 350mm, ejector stroke: 100mm. Screw diameter: 25mm, stroke volume: 99cm³, injection pressure: 1400bar, L/D ratio: 20, screw stroke: 140mm. Machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 3300kg, operating hours: 74165h. The machine has slight leaks in the hydraulics. Documentation available. On-site inspection is possible. Individual sale possible. Do Iov Sufaoa Srwyscg

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder BH45-30D Dcj Ia Sreuxa Abswyeg with barrier screw and mixing section. 45mm extruder with 30L/D screw length The extruder is equipped with a new control system function-tested Several extruders of the same type available !

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Control: CC100 Dco Ia Srwjtrhv Sjysg Condition: fully funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Year of construction: 2020, Condition: excellent (used), Chiller SBS 330 built in 2020 for sale from our rental park. System receives new maintenance and leak test on takeover. Cooling capacity at 7/12°C and 35°C ambient temperature 320kW. The chiller has compressor sound insulation enclosures, winter package, low pressure and high pressure gauges, low water version, electronic expansion valves, X-Web, flange connections, Dce Ia Ssi Ab N Hjrwyog

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350 YEAR 2003 Grinding force 130 TO Scrow 40 mm Dj Iaod Sqrre Srwyecg Operating hours 77890 h tie bar spacing 42x42

Year of construction: 2015, Condition: excellent (used), Functionality: fully functional, Make: Viscotec Model: DeCON20 Year: 2015 Condition: Excellent Dco Ia Sordgygsrwyeg Use: Dryer / Decontamination Unit Main data: Max. output with flakes [500kg/h]* Net volume of reactor [2.6 m3] Installed power [125 kVA]* Energy consumption [0.10-0.15 kWh/kg]* Max. surface moisture of input material [1%] Output humidity [

Condition: ready for operation (used), Year of construction: 2008, Demag System 800/1120-9500 injection molding machine Year of production - 2008 Closing system: Closing force: 8000 kN Plate size (h x v): 1620 x 1500 mm Gap between columns (h x v): 1120 x 1000 Mold height min-max.: 500 - 1050 mm Maximum distance between plates: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mold weight: 7200 kg Injection system: Screw diameter: 130 mm Stroke volume: 7300 ccm Injection weight (PS): 6640 gr Injection pressure: 1300 bar Screw length: 20 l/d Electric-hydraulic equipment: De Iov T A Hhea Srwyocg Pump motor rated power [kW] 110 Heater power [kW] 79 Oil tank capacity (L): 1300 Dimensions and weight: Machine dimensions LxWxH: 12.3 m x 2.7 m x 2.7 m Total weight: 33500 / 9700 kg

Condition: used, Year of construction: 2017, overall weight: 100 kg, terms of delivery: EXW (ex Works) delivery time: on request Ds Ia Seuuu Szsrwyecg terms of payment: 100% prior to delivery

Year of construction: 2023, Condition: new, Chiller with refrigerant R454B < 500GWP. Dcj Iajmhgg Re Srwyjg Cooling capacity according to Eurovent 34kW. Internal pump, Internal tank , Coaxial evaporator , Winter package up to ambient temperature of -25°C, Internal bypass. Delivery time approx. 6 weeks Also available with other cooling capacities.

Condition: excellent (used), Year of construction: 1999, Angel ES 1800/350 HLClosing 350 TO (up to 400TO)Year 1999Scrow 60 mm De Ia Sred Sym Eewyocg

Condition: ready for operation (used), Year of construction: 2004, Krauss Maffei KM 2300 - 12000 MC injection molding machine Year: 2004 Controller version: MC 4 Number of operating hours 93,900 Closing unit Clamping force: 23000 kN Mould opening force, max.: 1420 kN Moving platen feed force Opening: 227 kN Moving platen feed force Closing: 203 kN Mould platen size (h x v): 2830 mm x 2400 mm Distance between columns (h x v): 2000 mm x 1600 mm Mould opening stroke: 2600 mm Min. mould height: 1100 mm Max. mould height: 1800 mm Max. daylight: 3700 mm Dcj Ijv T Aw Toa Srwysg Hydraulic ejector - stroke: 350 mm Ejector force forward/backward: 415/115 kN Injection unit Screw diameter: 135 mm Ls/D ratio: 23 Injection pressure: 1389 bar Sweep volume: 8588 ccm Injection weight, PS: 7815 g Injection rate: 1019 ccm/s Screw speed: 113 1/min Maximum plasticization rate: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Nominal pump motor capacity: 132 kW Installed heating power: 997kW Adjustable barrel heating zones: 7 Number of drying cycles: 350 1/h Tank capacity: 2500 ltr. Dimensions and weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total machine weight: 143000 kg Maximum mold weight: 62000 kg LRX 1000 robot X-axis - 2000 mm Y-axis - 3000 mm Z-axis - 5000 mm

Condition: used, Year of construction: 2013, operating hours: 33,000 h, clamping force: 55 kN, screw diameter: 32 mm, displacement volume: 965 cm³, injection pressure: 2,127 bar, overall weight: 2,300 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Manufacturer: BOY Type: BOY 55E Condition: technisch überarbeitet Operating hours: ca. 33.000 CLAMPING UNIT: - Clamping force: 55 t Öffnungsweg: 400 mm Mould installation height min.: 250 mm Mould installation height max.: - Tie bar distance (h x v): 360 x 335 mm Plate dimension (h x v): - Centering (fix- movingplate): - INJECTION UNIT: IU205 Screw diameter: 32 mm Injection weight in polystyrol: 92,3 g Stroke volume: 96,5 cm³ Einspritzdruck: 2.127 bar CONTROL: PROCAN ALPHA Screen language: DE / EN / IT / ES Operating manuel: DE Dce Ia Srwstug Theyeg EQUIPMENT: - Core pulls: - Air valves: 1x (Steuerung) Hot runner control devices: - Robot interface: Euromap 67 GENERAL DATA: - Installed heating capacity: 7,7 kW Pump drive power: 11,0 kW Total installed power: 18,7 kW Total weight: 2.300 kg Total size L x B x H: 3,5 x 1,2 x 2,1 m

Year of construction: 2022, Condition: as good as new (ex-display), air-cooled chiller ENR 008, 7,9KW at 7/12° calculated at an ambient temperature of 35°C, coaxial evaporator, internal P3 pump, storage tank with 50l water volume, speed controlled fan De Isfy Rykja Srwyscg

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350BJ 2003Sleisskraft 130 TOScrow 40 mmOperating hours 77890 hHolmenabstand 42x42 De Ia Sred Tnbhewyjcg

Condition: excellent (used), Woojin Plaimm TE50 IE 70 injection molding machine Year of production 2020 3 machines available Screw diameter fi 22 mm Injection pressure 2184 bar Injection volume 34 cm3 Spacing between columns 360 X 360 Dco Ia Srov T Aghewyjg weight 3,600 kg dimensions 4.0x1.3x1.6 m

Condition: excellent (used), Year of construction: 2001, Conveyor U. Dosing unitsBrand: A. TschritterType: WC 100BJ 2001 Dco Ia Sod Twgcerwyeg

Condition: excellent (used), Year of construction: 2000, Demag 150/500-840 Closing 150 TO PVC clinder Ds Ia Sjfp U Hnerwyocg Scrow 50 mm Sprayweighted 400 g Tie bars wide 50x50 FY 2000