Year of construction: 2002, Condition: ready for operation (used), Functionality: fully functional, ONLY AVAILABLE DUE TO FACTORY CLOSURE Can be seen in operation currently. Granulator has been meticulously maintained by fastidious engineer / owner. This is offered as a complete line including Infeed cleated conveyor belt feed for either lumps directly, or feed of loose shred. The feed is complemented by a large CMC bandsaw included in the offer. Also included in the offer is Rare earth magnet on the outfeed , and electronic metal detection covering ferrous and non ferrous metals . A Kongskilde fines separation unit, transport fans, cyclones and pipework all make the line super efficient. Electrical control panel, and additionally a mains electrical distribution configuration mounted on free standing support is also included. Many spare screens, spare blades, drive belts etc all complete the package. In full running order and currently can be seen and tested running. Cgelowf Rw Djipy Ayot

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Colijq A Um Ropy Aysgt Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Year of construction: 2002, operating hours: 130 h, Condition: excellent (used), machine/vehicle number: 32503612, This Collin Press has been in the machine storage at Plastima Used Machinery since 2021. The machine is from 2006 and has a normal number of working hours for its age. – Brand: Collin Lab & Pilot Solutions Cgolipyold Uf So Ayst – Fashion model: P200PV – Construction year: 2002

Condition: new, New device Enmair Electro-pneumatic sprue picker ER available immediately from stock ER series type 650 Application range of 5 ton injection molding machine Horizontal travel 650 mm Vertical travel 125 mm Swivel angle 5 Gripper angle ° Lifting weight approx. 3kg Bracket on the back enables easy adjustment of the Cslier A D Itjpy Ayjgt Swivel angle to the right / left, as required Required operating air pressure 5 - 7 bar 220V 50 Hz Device can be offered with Euromap 12 or Euromap 67 plug, depending on the pre-installation on the injection molding machine. User interface: English, Dutch

Condition: ready for operation (used), Year of construction: 2018, operating hours: 58 h, General Data Measurements width 4360 mm Measurements depth 1718 mm Measurements height 3910 mm Machine weight 7600 kg Injection Unit Screw diameter 35 mm Cgjlipy Aewchwieyjt Injection pressure 2500 bar Clamping Unit Clamping force 1000 kN This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2009, Connected load: 4.55kW, cooling capacity: 9kW, circulation medium temperature: 30°C, refrigerant: R 134a, filling weight: 2.13kg, max. operating overpressure: 21bar, compressor volume flow: 11.46m³/h, compressor speed: 2900rpm, compressor discharge pressure: 22.6bar. Documentation available. On-site inspection is possible. The appliance was only used for a few hours for test purposes. Coliswhfmlepy Ayogt

Condition: good (used), Year of construction: 2011, Make WM Model FC 780E Year 2011 Condition Good Stations Forming Cutting and Stacking Max Tool Size 780 x 570 mm Depth of draw 130 / 130 mm Max material width 810 mm Max Sheet Thickness 1.8 mm Cgjlisttlzfjpy Ayot Max mould closing force 20,000 daN Maximum cycles-minute 45 Forming pressure 7 bar All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: excellent (used), Year of construction: 2005, Arburg 320K 700-250 with the side robot Arburg Multilift H Year of manufacture: 2005 injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Cslipyewcmrxe Ayjgt Clamping unit : clamping force: 70 t tie bar distance: 320x320 mm size of clamping platens: 476x476 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Air valve x 3 Control with hot runners injection unit hardened - bimetal Central lubrication Dimensions: Weight: 2350 kg length/width/height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,1 kW Total power: 21,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2007, operating hours: 130 h, Condition: good (used), machine/vehicle number: 32503612, This Collin inspection system has been in the machine storage at Plastima Used Machinery since 2021. The machine is from 2007 and has a normal number of working hours for its age. – Brand: Collin Pilot & Lab Solutions – Model : Coficos AIS – Construction year: 2007 Cgslipjld Ukpey Ayot

Condition: new, New device MASS International Color mixer / Batch mixer Mixer for plastic granules available from stock at short notice Mixer MV 2: Steel version Capacity 200 liters / 120 kg granulate Length 700 mm Width 700 mm Height 1050 mm (incl. control panel 1250 mm) mobile on steerable stop rollers Removal opening for suction lance on both sides, additional drain opening at the bottom, Safety switch on inlet cover and drain opening, Height adjustable in 25 mm steps, Inspection window to check fill level Control via control panel Interval and continuous mixing adjustable MV batch mixer for complete mixing of the entire plastic granulate. Ideal for mixing in additional components such as color batch, additives, fillers, etc.. Due to the forced guidance through the screw sleeve, the entire plastic granulate in the mixer is in the flow, plastic granulate in the mixer is in the flow and mixes completely with the additional completely mixed with the additional components within a short period of time. No "dead" corners are formed, as is the case with conventional Cgoliju Ti Tvepy Ayet screw mixers / agitators.

Year of construction: 2013, Condition: ready for operation (used), General Data Measurements width 1830 Measurements depth 5730 Measurements height 2230 Machine weight 7300 Injection Unit Cgslipyov U Ew Ee Ayot Screw diameter 45 mm Shot weight 269 g Stroke volume 286 cm³ Injection pressure 1694 bar Clamping Unit Clamping force 150 ton Additional Equipment Core Pulling: 1 Air Valves: 1 Robot Interface: EUROMAP 67 Screw Drive: Electric This ROMI EL ELECTRIC machine was manufactured in 2013 and features a robust clamping force of 150 tons, accompanied by platen sizes of 700 x 700 mm. It offers a screw diameter of 45 mm with an impressive injection pressure of 1694 BAR and a stroke volume of 286 cm³. Consider the opportunity to buy this Sandretto ROMI EL 150/485 machine if you need quality plastic processing capabilities. Reach out for more details regarding this machine. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2000, Arburg 370S 800-350 Year of manufacture: 2000 Injection unit: Screw diameter: 35 mm Injection weight: 117 g injection pressure: 2500 bar Metering volume: 139 ccm Cgolipy Aowcmv Dsyst Clamping unit : clamping force: 80 t tie bar distance : 370x370 mm size of clamping platens: 570x570 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap Robot interface Hydraulic core pull x 2 Injection unit hardened - bimetal Built-in sorting flap Integrated lateral original Arburg sprue picker Dimensions: Weight: 3800 kg Length/width/height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating power: 10,2 kW Total power: 28,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: new, New device Enmair EML-6U Suction conveyor / vacuum cleaner Several devices immediately available from stock Enmair EML‐6U Cgjlier A D I Ejpy Ayjt Funnel capacity 7.5 liters Conveyor volume 300 kg/h Motor 230V 50Hz Stainless steel container Automatic filter cleaning Metal filter insert Additional exhaust air filter for external installation Incl. wired remote control, approx. 2m cable length Incl. 3m spiral hose ¤ 40 mm with stainless steel probe

Condition: excellent (used), Year of construction: 2010, Arburg 420C 1000-290 Year of manufacture: September 2010 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Dosing volume: 144 cc Clamping unit: Clamping force: 100 t Type distance: 420 x 420 mm Clamping platen size: 570 x 570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Cjlipy Ajwcm Tvsyjgt Injection unit hardened - bimetal Dimensions: Weight: 3600 kg Length/Width/Height: 4.30 x 1.63 x 2.07 m Drive: Pump/Motor: 15 kW Heating power: 6.4 kW Total power: 21.4 kW All machines offered are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: new, New appliance ENMAIR Color dispenser ECM-5012 several devices immediately available from stock volumetric dosing screw 12mm Cgsliji Igw Hspy Ayst capacity 0,1 - 2 kg/h hopper 6 liters 1 x 230V 50 Hz Optional: Double color mixer Funnel 12 liters

Condition: excellent (used), Year of construction: 2010, Arburg 470H 1000-400 e² / Hybrid machine Year of construction: 2010 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Metering volume: 254 ccm Clamping unit: Clamping force: 100 t Distance between tie bars: 470x470 mm Size of the clamping platens: 637x637 mm Ejector: hydraulic Clamping unit: toggle lever Control system: SELOGICA touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: h in automatic mode Air valve x 1 Control unit with hot runners x 12 Hardened injection unit - bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by a servomotor controlled by an inverter Centralized lubrication Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) Dimensions Weight: 5090 kg Celipyswcnaqo Ayjgt Length/width/height: 4.40x1.56x2.03 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Boy 90 M Year of manufacture: 2004 Injection unit: Screw diameter: 42 mm Injection weight: 193 g Injection pressure: 1724 bar Metering volume: 214.7 ccm Clamping unit : clamping force: 90 t tie bar distance: 430x360 mm size of clamping platens: 635x610 mm ejector: hydraulic clamping unit: hydraulic Control: Procan - touch screen Additional equipment: Euromap 12 Robot interface Air valve x 1 Dimensions: Weight: 3100 kg Length/width/height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating power: 11,3 kW Total power: 26,3 kW Cgelipyswcmbmo Ayot All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Cjlipyjwcmb Ho Ayogt Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Battenfeld HM 45/60S with sprue picker Wittmann W702 / machine in very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 30 mm injection weight: 31.1 g Injection pressure: 1100 bar Metering volume: 34.2 ccm Clamping unit : clamping force: 45 t tie bar distance: 320x270 mm size of clamping platens: 480x460 mm ejector: hydraulic clamping unit: hydraulic Control system: UNILOG B6 - touch control panel Additional equipment: Machine in very good technical condition Operating hours: approx. 39.000 h Euromap Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear resistant and resistant to corrosion Proportional valve on the injection unit - precise injection It is possible to buy the machine with the sprue picker Wittmann W702 for additional payment Dimensions: Weight: 2500 kg length/width/height: 3.00x1.30x1.90 m Drive: Pumps/motor: 11 kW Heating power: 3,8 kW Total power: 14,8 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Cgslipyewcmdne Ayot Price: Upon request

Condition: excellent (used), Year of construction: 2008, Arburg OK-C S350-60 / Vertical injection molding machine with sliding table / Very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t tie bar distance: 0x0 mm size of clamping platens: 295x395 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Vertical injection molding machine with sliding table 3 stations on the sliding table Air valve x 4 Hydraulic core pull x 1 Control system with hot runners Injection unit hardened - bimetal Parallel movements Infrared protection curtains It is possible to change the screw diameter Dimensions: Cgelipy Ajwcmhgjyst Weight: 2500 kg Length/width/height: 2.55x1.85x3.52 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2001, Arburg 320C 600-250 / machine in very good technical condition Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 60 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: hydraulic clamping unit: hydraulic Cslipy Ajwcmqheyogt Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Core pull control Injection unit hardened - bimetal Built-in sorting flap Dimensions: Weight: 2330 kg Length/width/height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2017, Haitian JU 5500II plus with the Sepro Industrial Robot Success 22 robot / Operating hours: 10,218 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 80 mm Injection weight: 1693 g Injection pressure: 1730 bar Metering volume: 1860 ccm Clamping unit: Clamping force: 550 t Distance between tie bars: 920x830 mm Size of the clamping platens: 1280x1260 mm Ejector: hydraulic Clamping unit: hydraulic Control: Haitian - touch screen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 10,218 h in automatic mode Number of cycles: 599412 Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 4 Hardened injection unit - Bimetal Main motor of the machine - Servomotor driven by inverter -Energy saving The injection unit is driven by the servo motor controlled by an inverter Automatic mold height adjustment Robot Sepro Industrial Robot Success 22 Year of construction: 2018 Celipswcm S Sey Ayogt 5-axis robot Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 23000 kg Length/width/height: 7.62x2.39x2.59 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table and additional automation. Year of manufacture: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - touch screen Additional equipment: Production line with robot, rotary table and additional automation Vertical injection molding machine Cgjlipyswcmaij Ayjt Air valves Injection for mold parting Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor controlled by an inverter - very precise Automatic part feeding with quality control system Machine workstation protection with safety package Dimensions: Weight: 350 kg Length/width/height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2015, Wittmann Battenfeld Smart Power 90/350 / hybrid machine / operating hours: approx. 24,000 in automatic mode Year of manufacture: 2015 injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Injection pressure: 2083 bar Metering volume: 169 ccm Clamping unit: clamping force: 90 t tie bar distance: 470x420 mm size of clamping platens: 680x660 mm ejector: hydraulic clamping unit: hydraulic Control: UNILOG B6 - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Machine in perfect technical condition Operating hours: approx. 24.000 in automatic mode Euromap 67 Robot interface Cgslipy Ajwcmc Doyst Air valve x 2 Hydraulic core pull x 1 Injection unit is wear resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter -energy saving Proportional valve on the injection unit -precise injection There is a possibility to purchase the machine with robot or manipulator Dimensions: Weight: 4100 kg Length/width/height: 4.18x1.42x2.18 m Drive: Pumps/motor: 15 kW Heating power: 10,4 kW Total power: 25,4 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2006, Engel Victory 330/90 / Machine in very good technical condition Year of construction: 2006 Injection unit: Screw diameter: 40 mm Injection weight: approx. 190 g Injection pressure: 1665 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 90 t Distance between tie bars: 0x0 mm Size of the clamping plates: 740x680 mm Csliswcmflepy Aysgt Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Machine in very good technical condition The machine worked in the so-called "clean production" for the food industry Tie-bar-less machine Control system with hot runners x 6 Hardened injection unit - bimetal Machine was regularly serviced by the authorized service Engel Dimensions: Weight: 7300 kg Length/width/height: 4.35x1.48x2.05 m Drive: Pumps/motor: 15 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: On request