Year of construction: 1998, Condition: ready for operation (used), Functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 6,000 rpm, table load: 15,000 kg, Fully functional condition + regular maintenance by machine manufacturer Control completely renewed in 2017! Crjb Enajv Dhb Sokljb TECHNICAL DETAILS X-axis: approx. 5,000 mm Y-axis: approx. 2,500 mm Z-axis: approx. 1,250 mm Control: Fidia CXR with handwheel - new from 2017 Clamping table dimensions: approx. 5,600 x 2,740 x 520 mm (cast) Table load: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Milling spindle power: 8 kW Spindle speed: 6,000 rpm Tool holder: 78/8 flange Tool clamping: manual with union nut Feed rate: max. 20 m/min Axis acceleration: max. 1.5 m/qs MACHINE DETAILS Connection power: approx. 28 KW Pre-fuse: 63 A Space requirement: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg With little effort, it can be converted to an HF spindle with 24,000 rpm and HSK63 holder. This enables the machining of a wide variety of materials, including aluminum. The integration of a tool changer is also easy to implement.

Condition: new, For valve Herion 7032238 Creb Enev D U H Ioakleb 1 set consisting of: 1 piston 34.9/16.5/0/37 POM 1 R15 20.5/32/4 FPM flat 2 K1 35.2/25/6.5 FPM grooved ring 1 O-ring 67 x 3 mm

Year of construction: 2022, operating hours: 500 h, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 2002631, Fully automatic cutting machine electronic Csb Eetp Ed Isnaklorb Flat knife 4 axes of movement Material: plastic, natural filaments Attention: The machine hours are estimated !!! ( An exact reading was not possible )

Condition: excellent (used), Year of construction: 2008, Ferromatik Milacron Crsb Enakjvk Dbzsljb Type: K-TEC 85-S Injection molding machine (85 tons) Serial number: 522500 Year of production: 2008 Machine weight: 5500 kg Screw diameter: 25 mm Closing force: 850 kN Working hours: 24.386h.

Year of construction: 2008, operating hours: 40,742 h, Condition: excellent (used), WPC double strand extrusion line CINCINNATI-GREINER Parallel twin screw extruder CINCINNATI FIBEREX Argos135 Output range: 500 – 1.000 kg/h (Actual output depends on the formulation mix, the moisture content of the material processed, the extrusion die and the extrusion environment) Adjusted motor power: 160 kW Total connected power: 427 kW Csb Enajuvdt Roklsrb Screw diameter: 135 mm, L/D = 28 Screw speed: 27 rpm Screw & barrel in tungsten carbide execution (highly wear resistant) Double venting system for barrel Force feeder for material CONPRO 5-components gravimetric dosing system PLASTICOLOR vacuum conveyors for all components except for main component Dimensions extruder (L x W x H): approx. 9.000 x 1.600 x 1.300 mm Weight: approx. 11.000 kg incl. tooling equipment for WPC decking from GREINER GREINER dual strand calibration table getCAL 11,2– 5P/4Z – DUAL A (YOM: 2008) Mounting frame (L / W / H): 2 x 11.170 / 2 x 380 / 940 – 1.040 mm Rail distance: 2 x 320 mm Center-line distance dual: 500 mm Mounting width (max.): 400 mm Height-Adjustment: 100 mm Side adjustment: (+/-) 15 mm Longitudinal adjustment: 750 mm Tilt adjustment: (+/-) 10 mm 5 pcs of vacuum pumps each 4.6 kW incl. 50 pcs of vacuum connections ABA 1/2 ” 4 pcs of cyclone pumps each 1.1 kW Dimensions (L x W x H): 11.200 x 1.580 x 1.200 mm incl. calibrators & water tanks GREINER dual strand haul-off/saw comb. getCOM 30/9-235-S/500 (YOM: 2008) Max. profile dimensions (W x H): 235 x 140 mm (each side) Contact length for caterpillars: 2 x 2.300 mm Number of pads: 2 x 55 pcs. Pad width: 235 mm (each side) Haul-off force max.: 30 kN (each side) Haul-off speed: 0.5 – 10 m/min (each side) Extrusion height adjustment via feet: 1.040 – 1.140 mm Saw-blade diameter: 500 mm Saw-motor: 3.4 kW (each side) Cutting accuracy at 6 m/min: (+/-) 2 mm Dimensions (L x W x H): 6.700 x 1.900 x 1.810 mm Weight: 4.500 kg incl. dust exhauster (each side) GREINER dual tipping table GTT 6,0 (YOM: 2008) max. profile dimensions (L x W): 6.000 x 420 mm Working height: 1.040 – 1.140 mm (adjustable) Dimensions (L x W x H): 5.500 x 1.100 x 1.125 mm Weight: 350 kg (each side) incl. roll conveyor Attention: Only serious minded inquiries from business relevant companies will be answered. Full company information is mandatory!

Condition: excellent (used), Year of construction: 2005, Description Stork N-2500-1400 250 tons Year of manufacture:2005 Spraying unit: Spraying pressure (max.) 2100 bar spraying volume (max.) 595 ccm Injection weight PS (max.) 565 g spraying speed (max.) 299 ccm/s Nozzle (immersion depth) Clamping unit: Clamping force 250 tons clamping force 275 tons size of clamping platen (hor. + vert.) 920 X 920 Opening stroke (max.) 575 mm Max. Mold weight Crsb Enaepxnuxeklsb Mold height (min./max.) 200-685 Clearance between tie bars 585-585 mm Ejection stroke (max.) 175 mm Ejector diameter max.80 mm Centering ring (DS-AWS) 160 mm Max. clear width between clamping p. Options: Core pull (time limit switch) Freely programmable Ejector plate (end position control) Fail-safe device (light barrier) 2 air ejectors or air controlled valve gate nozzle Hydraulic nozzle and mold valves Switchover to holding pressure by pressure measurement in the spraying cycle. incl. Labotek granulate dryer. Eta Control to reduce power consumption. Machine is under power and can be inspected and tested by prior arrangement.

Year of construction: 2018, Condition: new, Control system Battenfeld Unilog 9000 C for Battenfeld injection moulding machine Crjbod Eam Rj Enakleb

Year of construction: 2008, operating hours: 40,742 h, Condition: excellent (used), Functionality: fully functional, Parallel twin screw extruder CINCINNATI FIBEREX Argos135 Output rate: up to 1.500 kg (depending on material, extrusion die and extrusion conditions) Adjusted motor power: 160 kW Total connected power: 427 kW Screw diameter: 135 mm, L/D = 28 Screw speed: 27 U/min Double venting system on barrel Screws & barrel in tungsten carbide execution (highly wear resistant) Force feeder for material Dimensions extruder (L x W x H): approx. 9.000 x 1.600 x 1.300 mm, Weight: approx. 11.000 kg Crsb Enaeuvdtwsklob Spare second-hand screws & barrel in tungsten-carbide are available as well

Condition: excellent (used), Moog Valve for Battenfeld Mod D665-404A Crob Enaof N Iw Ejklsb Type P15FXHACN6AO

Condition: excellent (used), double pump for Krauss Maffei Maschines Crjb Ejg I Uyconakljb SY2DFE1-21/071-071 KM Nr. 6441936 MNR: R900751978

Condition: excellent (used), amplifier card VT 5014 for ENGEL hydraulic Creb Enof Ri T Djaklsb

Condition: excellent (used), Battenfeld Calzoni hydraulic motor MR 4500 L Creb Enaefpa Inoklsb

Condition: excellent (used), Handheld terminal KeTop Panel C 35 for Engel robot Viper Crjb Enakjfnqb Doleb

Condition: excellent (used), manual control unit Schleicher Type HBG 2P-0301 for Battenfeld Crob Enaof Ri Upekljb

Condition: refurbished (used), Rexroth double pump for Battenfeld injection moulding machine SY2DFE1-2X/100-100 Crob Enaefpa Ngjkleb MNR: R901016480

Condition: refurbished (used), overhauled Rexroth double pump for Krauss Maffei SGM machines. Service, repair and exchange of hydraulic pumps Rexroth, Voith, Bosch, Moog. Creb Enefnp U Nsaklob

Condition: excellent (used), Inverter for ENGEL robots Acopos Multi PO 220 Crob Eofnqbujnaklob Acopos Multi CO160

Condition: excellent (used), Battenfeld Unilog control 9000 B Cjb Ensf N Ivveaklsrb

Condition: new, Rexroth Controller 4WRSE10 MNR: R900950465 for Krauss Maffei Csb Eef E Nv Rsnaklsrb for opening/closing

Condition: excellent (used), Screw cylinder complete with screw, cylinder head and closure nozzle for ENGEL injection unit size ES3550 Crsbjfnqapo Enakleb

Condition: excellent (used), Hydraulic motor for Krauss Maffei injection molding machines. Crjb Eeiggnaenakljb MOS 6500-30-168

Condition: excellent (used), CC 100 controller for Engel injection moulding machines Crob Enakjfnqbyjleb

Year of construction: 2009, Condition: excellent (used), Pleiger hydraulic motor for Krauss Maffei MOS 4500-05-2203 Crjb Enajf N Ixusklob

Year of construction: 2005, Condition: excellent (used), Manufacturer: BATTENFELD Type: HM 1300-9200H-7700H-BM Control system: UNILOG B4 Clamping force: 13000 kN Year of manufacture: 2005 Csb Enakjgyk Nhelsrb Technical data closing side: Drive type: full hydraulic Closing type: full hydraulic Type of construction: four-bar Closing force: 13000 kN beam dimension h: 1600 mm tie bar dimension v: 1250 mm platen size h: 2220 mm plate size v: 1880 mm Installation height min: 1000 mm Installation height max: 1800 mm distance between plates max: 3850 mm opening stroke: 2850 mm ejector stroke: 350 mm Ejector force: 165 kN centering moving platen D: 315 mm centering fixed platen D: 315 mm Technical data injection side: Screw diameter: 120 mm Stroke volume: 5655 ccm injection pressure: 1630 bar Screw length: 22 l/d Plasticizing flow: 144 g/s PS The technical data of the 2nd injection unit are as follows: Injection unit II 7700 Screw diameter 100 mm, specific injection pressure 1960 bar, calculated stroke volume 3927 ccm, screw L/D 22, plasticizing flow 122 g/sec Dimensions & Weight: Machine dimensions L x W x H: ca. 12,5 m x 3 m x 2,5 m Total weight: 113500KG Equipment: On-screen text German CEE socket 32A Core pull hydraulic 1x Core pull hydraulic 2 x Air valve 1x Machine with water battery Machine without material hopper Leveling elements Interface EUROMAP 63 Interface EUROMAP 67 Interface for Airmould Schuko socket 16A Two-component injection molding machine Machine is offered without peripherals.

Condition: new, Rexroth double pump for Battenfeld injection moulding machine R900737658 SYDFE1-20/100R R900737659 SYDFE1-20/071R Csb Enakjfnqcgjljrb