Condition: excellent (used), Year of construction: 2006, Arburg 37U 600-290 injection molding machine Year of production - 2006 Closing system: Cebsv Hm I As Enaklorb clamping force: 600 kN distance between columns h x v: 370 x 370 mm size of mold plates h x v: 510 x 510 mm min. mould height: 200 mm max. daylight: 600 mm opening stroke: 400 mm ejector stroke: 125 mm ejector force: 30 kN Injection system screw diameter: 35 mm injection volume: 144 ccm injection weight: 132 g injection pressure: 2000 bar screw length: 20 l/d screw torque: 450 N injection speed to the hole: 140 g/s PS number of heating zones: 4 nozzle stroke: 240 mm Dimensions and weight machine dimensions L x W x H: 3.8m x 1.45m x 2.12m total weight: 3500 kg

Condition: excellent (used), Year of construction: 1998, clamping force: 2,000 kN, screw diameter: 45 mm, injection pressure: 2,500 bar, injection weight: 240 g, mold height (min.): 250 mm, Arburg 520C-2000-675 (154) without hopper General information Product Code: 154 Availability: In Stock Year of production: 1998 Brand: Arburg Technical data Shot Weight: 240 g Clamping Force: 2,000 kN Screw dia: 45 mm Injection pressure: 2500 bar Cjb Enakjvtzmtolorb Tie bar distance: 520 x 520 mm Platen size: 715 x 715 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 44,9 kW Workinghours: 126766 h Weight: 6630 kg Dimensions: 5,6 x 1,7 m Euromap: Yes Air valve: Yes

Condition: new, Year of construction: 2025, Our belt haul-off can be built in different sizes. 40-80 m/min Crebshd Ndxo Enaklob Contact length 170mm to 800mm MADE in GERMANY

Condition: used, Year of construction: 2001, Door hinge drilling unit: with 8 drilling spindles and adjustable drilling depth for simultaneous drilling of the fixing holes for 2-part and 3-part door hinges in blind and leaf frames. Frame and door frame: are precisely adjusted by means of the mitre fence, 2 pressure supports and guide pins on the drilling table and then pneumatically clamped. Crjb Enaksbpt Ecslob The stops in the mitre and foot area: are adjustable. Suitable for the following series:Royal S50 N/65N, Royal S55/65/70, Royal- R45, 54w, 64w, 70, and 78w, Iskotherm 74 Weight: 90 kg

Condition: good (used), Year of construction: 2009, Functionality: unexamined, travel distance X-axis: 550 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,500 mm, Manufacturer Demag Type DR721 X-550 mm Y-1200 mm Z-2500 mm Cob Enakouwdw Telsrb C - pneumatic, rotation 90 degrees Load capacity 10 kg Unfortunately without teach box

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, rotational speed (max.): 12,000 rpm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, Fully functional condition + regular maintenance by machine manufacturer TECHNICAL DETAILS Control: Heidenhain iTNC530 with handwheel X-axis: approx. 3,000 mm Y-axis: approx. 6,000 mm Z-axis: approx. 1,250 mm 4th axis: swivel axis Spindle Spindle type: milling spindle for styrofoam (can be converted to high-frequency spindle) Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: Manual with union nut Drives & feed Feed speed (X, Y, Z axis): up to 20 m/min Axis acceleration (X, Y, Z axis): up to 1.5 m/s² Crsb Enajv Dhlqjklob MACHINE DETAILS Connected load: approx. 28 kW Pre-fuse: 63 A Machine space requirement: approx. 5,000 x 10,000 x 4,500 mm Total weight: 10,000 kg With little effort, it can be converted to an HF spindle with 24,000 rpm and HSK63 holder. This enables the machining of a wide variety of materials, including aluminum. The integration of a tool changer is also easy to implement.

Condition: excellent (used), Year of construction: 2005, Arburg ALLROUNDER 720 S 3200-2100 injection molding machine Year of manufacture: 2005 Closing unit Cob Enaev Hmvgskljrb Closing force: 3600 kN (increased at the factory) Clamping force: 130 kN Opening force: 100 / 800 kN Max. opening stroke: 700 mm Minimum mold height: 300 mm Max. distance between clamping plates: 1000-1400 mm Clearance between columns: 720 x 720 mm Dimensions of mold clamping plates: 1040 x 1040 mm Max. weight of the moving mold half: 3300 kg Ejector force: 100 kN Ejector stroke: 250 mm Hydraulics, drive, other Hydraulic pump drive power: 55 kW Total installed power: 88.9 kW Control cabinet Safety standard: DIN EN 60204 Socket set: 1 x 16 A Injection unit Screw diameter: 70 mm Screw working length (L/D): 20 Cylinder capacity: max. 280 cm³ Injection volume: max. 1078 cm³ Injection weight (PS): max. 984 g Injection pressure: max. 2000 bar Screw speed: max. 51 rpm Screw torque: max. 2247 Nm Nozzle pressure force: max. 90 kN Nozzle stroke: max. 600 mm Installed power of cylinder heaters: 6 x 4500 + 3300 W Installed power of nozzle heaters: 1000 W Machine dimensions and weight Net weight: 17000 kg Electric power supply: Motor + heaters: 125 A Heaters: 50 A Additional options Servo control technology with 2 control pumps Interface for robot system (according to EUROMAP 67, 50-pin) Electric axis control Interface for mold temperature control Interface for V24 printer Interface for PC keyboard ARBURG AES energy saving system Software package "Additional monitoring functions" Software package "Additional machine movements" Software package "Production control" Machine optimization / user support package Software package "Quality assurance" Documentation package

Condition: excellent (used), Year of construction: 2016, operating hours: 23,170 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection pressure: 2,005 bar, injection weight: 618 g, mold height (min.): 330 mm, Injection molding machine Krauss Maffei 250-1400CX with robot and gas boost (225) Product Code: 225 Availability: In Stock Cob Ensvtzkfsaklerb Year of production: 2016 Brand: KRAUSS MAFFEI Technical data Shot Weight: 618 g Injection speed: 848 ccm/s Clamping Force: 2,500 kN Screw dia: 60 mm Injection pressure: 2005 bar Tie bar distance: 630x630 mm Platen size: 1135x1180 mm Mould height min.: 330 mm Total day-light max: 1150 mm Type of controls: MC6 Language: German Power: 70 kW Workinghours: 23170 h Weight: 15000 kg Dimensions: 6,5x2,3x2,3 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes Heating channels: Yes Gas bottle: Yes Picker or robot: Yes

Year of construction: 2025, Condition: new, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Csb Enaoiv H Ekoklorb Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Year of construction: 1997, operating hours: 31,850 h, Condition: good (used), Conical twin screw extruder - Manufacturer: CINCINNATI - Type: Titan 45 - Conical screws Ø45mm - Year: 1997 - 31850 operating hours - Engine power: 15kW Creb Eov D Nzmonakljb - Flow rate: 120kg/h - Replacement motor - Replacement vacuum pump - Replacement material feed screw

Condition: good (used), Year of construction: 2003, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,500 mm, Year of construction 2003 X = 600 mm Y = 800 mm Crob Enakouwdmbolsb Z = 1500 mm

Condition: used, Year of construction: 2001, Functionality: fully functional, Year: 2001 - technically efficient, ready to work (directly from the client) - corner cleaning machine SV 494 CNC Cjb Enajtr Dukeklorb - for-head welding machine AKS 6110 - turning station - cooling station - flash limitation: 0.2 - 2 mm

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, Functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater Cob Enakev D Nxlslerb 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: excellent (used), Year of construction: 2004, Engel Victory 750/150 Tech (146) without hopper Product Code: 146 Availability: In Stock Cjb Esvtzf Ajnaklorb Year of production: 2004 Brand: Engel Technical data Shot Weight: 354 g Clamping Force: 1,500 kN Screw dia: 50 mm Injection pressure: 1427(1909) bar Tie bar distance: Tie-bar less Platen size: 750 x 850 mm Type of controls: CC200 Language: German Power: 61 kW Workinghours: 98108 h Weight: 9500 kg Dimensions: 5,7 x 2 m Hopper: No Core pull: Yes Euromap: Yes

Condition: used, Year of construction: 1992, machine/vehicle number: 293784, Drill spindles: 8 Drill spindle rotation direction: 4 right and 4 left Drill spindle speeds: 2800 rpm Shaft mount: 10 and 11 mm Drill stroke: 100 mm Crjb Enebnnyboaklob Drive motor: 380 V, 1.1 kW Table height above floor: 840 mm Space required: approx. 650 x 400 x 1700 mm Weight: 120 kg

Condition: good (used), Vibration welding machine for plastic Stock number: 2974 Manufacturer: Branson Type: VIP 2830 Cjb Enev D Nfroaklerb Device number: 4.E035.00.A10 Table: 1,000 x 420 mm Stamp: 800 x 420 mm Distance table - stamp: 600 mm Weight: approx. 2 t Dimensions: 2,400 x 1,700 x 2,400 mm Equipment: Condition: ready for use Sold without tools!

Condition: good (used), Year of construction: 1998, operating hours: 105,191 h, Functionality: fully functional, machine/vehicle number: F41, clamping force: 250 kN, screw diameter: 18 mm, clearance between the columns: 220 mm, displacement volume: 20 cm³, mold height (min.): 150 mm, opening stroke: 275 mm, plate width: 220 mm, plate height: 220 mm, overall weight: 1,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 58 A, Machine is in use. Can be viewed in operation. Peripherals are not included with the machine. Cobsvrg Uge Enaklsrb

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, Year: 2015 - technically efficient, ready to work – after full service - vertical work Cjb Enasvai Nveklerb - flash limitation: 0.2 – 2 mm - Windows 10 operating system - maximum welding dimensions: 2700 x 2500 mm - automatic regulation and monitoring of the welding process - protective gates

Condition: good (used), Year of construction: 1990, Battenfeld-Fischer VK 1-1 Blower Number of heads: 2 Center distance: 100 mm Maximum container volume: 0.5 l Number of stations: 1 Continuous Extrusion Number of extruders: 1 Screw diameter: 60 mm L/D ratio: 20 Parison thickness control: PROFILOG 32 points Center distance: 100 mm Hot knife Automatic coring Crob Enakevrfhrslob Voltage: 380 V Triphase Frequency: 50 Hz Blower: Dimensions (L x W x H): 4.60 m x 1.50 m x 2.60 m Weight: 5000 kg Cabinet: Dimensions (L x W x H): 0.85 m x 1.10 m x 2.40 m Weight: 400 kg

Condition: excellent (used), Year of construction: 2007, Injection molding machine Arburg 630S-2500-1300 (231) Product Code: 231 Availability: In Stock Year of production: 2007 Technical data Shot Weight: 510 g Clamping Force: 2,500 kN Screw dia: 55 mm Csb Enakevtmlheljrb Injection pressure: 2380 bar Tie bar distance: 630x630 mm Platen size: 900x900 mm Mould height min.: 400 mm Total day-light max: 1000-1300 mm Type of controls: Selogica Language: German Power: 68 kW Workinghours: 74.294 h Weight: 13500 kg Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes

Condition: excellent (used), Year of construction: 2011, Wittmann Battenfeld EcoPower 110/130 injection molding machine Creb Enjrn I Nreaklob Electric machine, energy efficient Control :UNILOG B6 Year of production : 2011 Closing force 110 tons Auger diameter 25 mm Injection weight max. 55.8 gPS Column spacing 470x470 mm Min. tool height 200 mm Max. tool height 450 mm Hydraulic working pressure 210 bar Machine weight 4600 kg L. 420 x width 140 x height 270 cm, Battenfeld has about 60000 hours (in the machine the computer was changed and the hours were not recorded there, now it has less hours 4944)

Year of construction: 2011, Condition: excellent (used), INJECTION MACHINE - PROCREA BLOWING TYPE Rev 300 This PROCREA REV 300 injection blow molding machine can produce completely finished hollow body containers, without waste as injection molded with different plastic materials, with fully automatic cycles, capacity of 50 cc. at 15 liters and weight of 20 gr. at 700 gr. Cjbepy Eq Hj Enakljrb This machine is predisposed to work with molds of 1 to 8 cavities and the production is very high thanks to the revolver system which carries out all the operations of injection, blowing and ejection of the finished part in a single stage. The construction of molds for the Rev 300 is very simple thanks to the automatic extraction system applied to the revolver.

Condition: good (used), Year of construction: 2000, operating hours: 38,900 h, Functionality: fully functional, clamping force: 9 kN, screw diameter: 115 mm, displacement volume: 5,349 cm³, injection pressure: 1,600 bar, injection weight: 5,062 g, STORK 900 T injection molding machine Clamping force: 900 T Reference : SXN 9000-8600 Year : 2000 Screw diameter : 115 mm Max. material pressure: 1600 bar Injection volume : 5349 cm3 Injection capacity : 5062 g Injection speed: 599 mm/s Plasticizing: 123 g/s Csb Enoq Iyazoaklsrb Distance between columns (H x V): 1010 x 1010 Column diameter: 190 mm Number of hours: 38,900 h

Condition: good (used), Year of construction: 2001, operating hours: 51,500 h, Functionality: fully functional, clamping force: 14 kN, screw diameter: 133 mm, displacement volume: 8,336 cm³, injection pressure: 1,600 bar, injection weight: 7,919 g, STORK 1400 T injection molding machine Clamping force: 1400 T Reference : SXN 14000-12500 Year : 2001 Screw diameter : 133 mm Max. material pressure: 1600 bar Injection volume : 8336 cm3 Injection capacity : 7919 g Injection speed : 771 mm/s Plasticizing: 143 g/s Distance between columns (H x V): 1300 x 1300 Column diameter: 220 mm Number of hours: 51,500 h Crsbsq Iyb Hs Enaklob

Condition: good (used), Year of construction: 2008, operating hours: 60,700 h, Functionality: fully functional, clamping force: 8,000 kN, clearance between the columns: 1,100 mm, BILLION bi-material injection press 800 T Locking force: 800 T Reference: H780/4200 Year: 2008 - H780 injection unit: 45 mm screw - Injectable volume of 341 cm3 - Injection pressure of 2276 bars - sfcw shnH4200 injection unit: 80 mm screw - Injectable volume of 2261 cm3 - Injection pressure of 1863 bars Passage between columns (H x V): 1100 x 1100 mm Plate dimensions (H x V): 2400 x 1570 mm Max. mold thickness: 1300 mm Minimum mold thickness: 350 mm Max. opening stroke: 1100 mm Hydraulic cores: 6 Rotating base G4 270mm digital Machine dimensions: 10200 x 2730 x 3533 mm Crsbjvrfdaj Enakleb