Condition: good (used), Year of construction: 2000, IPM inline pipe saw TP400 up to D=400mm Febujvzrcbe Tb R Nsgb

Year of construction: 2006, Condition: excellent (used), Functionality: fully functional, top dryer FarragTech GmbH CARD 40 S Fsbuovi I Ene Tb R Negb warehouse no.: 503539 type / device: top dryer manufacturer: FarragTech GmbH type: CARD 40 S year of construction: 2006 Power: 1,1 kW hopper volume: 40 Ltr.

Year of construction: 2024, Condition: as good as new (ex-display), - Winding speed: 1 - 100 m/min - Winding pipe diameter: 3 - 20mm - Possible drum sizes: * Diameter: 300 - 1800mm (Possible order special sizes) * Width: 400 - 1000mm (Possible order special sizes) - Maximum winding drum weight: 1000kg (Possible order heavier) - Drum fast lifting and holding ensures pneumatic solution. - Speed and torque control from potentiometer. - Mitshubishi touch screen and frequency inverter. - Touch screen shows: * Total counted meter * Actual counted meters * From last start up counted meters * Actual winding speed and drum rpm-s Possible to insert in touch screen how many meter need to be rewind and after that machine stops. Fsbu Tsd Hgkfeb R Nogb With machine is possible to wind different plastic pipes, cabel, hoses and rope directly from extrusion line or rewind from bigger drum to smaller drum or coils.

Condition: good (used), Year of construction: 2013, Manufacturer: Schuma Type: SSE-500-R Year of manufacture: 2013 Device number: 48380-13 Roller width: 500 mm Separation gap: 3 to 110 mm Height: approx. 450 to 750 mm Floor area: 485 x 500 mm Condition: good Motor: planetary gear motor Connection: 0.1 kW Fjbu Tbovzwias R Negb Weight: 21 kg Dimensions: 600 x 500 x 600 mm

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 S1 Fsbjutni Rju Tb R Nogb Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: used, Year of construction: 2020, carrying capacity 500 kg weight 930 kg dimensions 1250 x 2590 x 1500 mm Operating instructions available Fgobovg R U Tsu Tb R Njb technical data see attached PDF

Condition: good (used), Functionality: fully functional, Year of construction: 2009, IPM Planetary Saw TPCK 800 Febuouy Rzwo Tb R Njgb

Condition: good (used), Year of construction: 2005, operating hours: 59,000 h, Functionality: fully functional, clamping force: 4,200 kN, screw diameter: 60 mm, clearance between the columns: 800 mm, displacement volume: 769 cm³, injection pressure: 2.2 bar, Equipment: documentation/manual, injection moulding machine KRAUSS MAFFEI KM 420-1900 C2 warehouse no.: 503535 manufacturer: KRAUSS MAFFEI type: KM 420-1900 C2 controller: MC 4 year of construction: 2005 operation hours: 59000 h technical data clamping unit clamping force: 4200 kN distance between tie-bars h x v: 800 x 800 mm size of mould plates h x v: 1270 x 1200 mm min. mould height: 580 mm max. open daylight: 1300 mm opening stroke: 720 mm ejector stroke: 250 mm ejector force: 95 kN centering diameter of moving platen: 200 mm centering diameter of fixed platen: 200 mm weight of mould: 6700 kg Febu Tbovitaqj R Nsgb technical data injection unit screw diameter: 60 mm swept volume: 769 ccm injection pressure: 2200 bar screw length: 23 l/d screw speed: 285 min plasticising rate: 70 g/s PS injection rate into the open: 700 g/s PS number of heating zones: 6 measures & weight measures of machine l x w x h: 6.83m x 2.33m x 2.48m total weight: 23090KG equipment included screen text german core pulling hydraulically 4x Machine without Handling machine without material hopper Anti vibration mounts mould heating 12x

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WTF40120 Main engine power: 75 kW Hydraulic system motor power: 5.5 kW Working rotor length: 800 mm Rotor diameter: 400mm Number of knives: 81 pieces Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators Fgebu Toq Sp Hheb R Njb The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: used, Year of construction: 2003, operating hours: 35,900 h, Functionality: fully functional, screw diameter: 58 mm, heating capacity: 25 kW (33.99 HP), power: 125 kW (169.95 HP), Selling due to a closure our WPC/PVC profile extrusion line consisting of: 1) Main extruder: manufactured by Cincinnati Austria 2003, model Fiberex T58, twin-screw, conical, counter-rotating, screw diam 58mm, motor 39 kW (DC), screws and barrel TC coated. The extruder is designed for WPC profile production but could be re-set for other product and/or type of plastic. Low running hrs. 2) Co-extruder: manufactured by Liansu in 2011, model LSE-38, twin-screw, conical, counter-rotating, screw diam 38mm, motor 11 kW (AC), screws and barrel TC coated, horizontal dosing feeder, double degassing filter, has own control cabinet, able to run synchronic with main extruder or stand-alone. Fgobjv Ddrtju Tb R Neb 3) Calibration table: manufactured by Weber in 2010, calibration length 4m, SS water bath, adjustments up/dwn, left/right, body dimensions 4000×1100×1200mm 4) Haul-off unit: manufactured by Technoplast Austria, double caterpillar track driven by 2x 2.2 kW AC motors, hauling size 240mm (W) x 2700mm (L), speed range 0～6.75m/min adjusted DC drive. Machine combined with cutting saw (diam 400mm) unit, cutting height 100mm, precision cutting length adjustment by Autonics controller. Dpls2V 5) Stacker: pneumatic discharge, length 6m. The line is in good working condition, could be demonstrated on-site by appointment. Optional equipment: vertical Kramer-feeder for pulp materials (made by Cincinnati), pneumatic material auger Simatic, optional replacing the co-extruder made by battenfeld-Cincinnati K38, etc.etc.

Condition: good (used), SPIROFLUX Dryer W x L x H 80 x 55 x 160 cm Fgsbueu Aqvmo Tb R Neb

Condition: like new (used), Year of construction: 2022, operating hours: 1,000 h, Functionality: fully functional, Forming Area: Max. forming area: 825 × 675 mm Min. forming area: 375 × 350 mm Max. tool dimensions: 850 × 700 mm Tool dimensions max. (block change): 850 × 700 mm Height of formed part above / below film level / total: 150 / 150 mm Max. film width (parallel rails): 900 mm Film thickness range (depending on film properties): 0.2 - 1.8 mm Max. production speed (depending on stacking system): 45 cycles/min Max. production speed BFS (depending on stacking system): 40 cycles/min Heating System: Heating capacity per heater bank: 67.2 / 67.2 kW Heating elements (ceramics, black - HTS): 125 × 125 mm Heating element layout (longitudinal row × cross row): 6 × 14 Forming Station: Forming station force: 420 kN Forming cutting force (BFS): 800 kN Max. tool weight top/bottom table: 750 / 750 kg Max. tool BFS weight top/bottom table: 750 / 750 kg Max. tool block weight: 1500 kg Top/bottom table movement: 170 mm Hole Punching Station: Hole punching station force: 420 kN Max. tool weight top/bottom table: 750 / 750 kg Max. tool block weight: 1500 kg Top/bottom table movement: 170 mm Cutting Station: Cutting station force: 800 kN Max. tool weight top/bottom table: 750 / 750 kg Fgjbu Tb Rovx Skyo Nsb Max. tool block weight: 1500 kg Max. tool weight knife plate: 150 kg Top/bottom table movement: 170 mm Downstacker: - P&P Inline: - P&P: 420 mm Pusher Weight: Up-stacker: 80 kg Tip-stacker: 40 kg Downstacker: - P&P Inline: - P&P: 80 kg Stacking station - Max. Speed: Up-stacker: 45 cycles/min Tip-stacker: 45 cycles/min Downstacker: - P&P Inline: - P&P: 50 (D-Basket) Vacuum System: Operation pressure: 6 bar Vacuum pump: 300 m³/h / 2× 1½" / 2× 1" Vacuum connection tool: - Forming air vessel: 2× 90L / 2× 2" Forming air connection tool: 4 × 1" max. coupling Cooling water circuits: 2 × 6 × 1/2" Electrical Data: Voltage: 3 × 400V AC + N + PE (50/60 Hz)

Condition: used, Functionality: fully functional, Year of construction: 2002, IPM Planetary Saw TPC 500 Fgjbouy Ry Tsu Tb R Nob

Condition: good (used), Year of construction: 2004, operating hours: 76,000 h, Functionality: fully functional, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 800 mm, displacement volume: 1,047 cm³, injection pressure: 1.778 bar, Equipment: documentation/manual, injection moulding machine KRAUSS MAFFEI KM 420-1900/55 CZ warehouse no.: 503534 manufacturer: KRAUSS MAFFEI type: KM 420-1900 55 CZ controller: MC 4 year of construction: 2004 operation hours: 76000 h technical data clamping unit clamping force: 4200 kN distance between tie-bars h x v: 800 x 800 mm size of mould plates h x v: 1270 x 1200 mm min. mould height: 380 mm max. open daylight: 1400 mm opening stroke: 1020 mm ejector stroke: 250 mm ejector force: 95 kN centering diameter of moving platen: 200 mm centering diameter of fixed platen: 200 mm weight of mould: 6700 kg technical data injection unit Fgobu Tbevirx Ee R Nsb screw diameter: 70 mm swept volume: 1047 ccm injection pressure: 1778 bar screw length: 20 l/d screw speed: 527 min plasticising rate: 95 g/s PS injection rate into the open: 953 g/s PS number of heating zones: 6 technical data 2. injection unit 55 with ø 22 Injection pressure: 1674 bar Volume: 30cm³ Distance between sprayer 1 and 2: 300 mm (piggyback ) measures & weight measures of machine l x w x h: 9.83m x 2.33m x 2.48m total weight: 23090KG equipment included screen text german core pulling hydraulically 6x Machine without Handling machine without material hopper Anti vibration mounts mould heating 16x Injection moulding machine for two components

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT3080 Main motor power: 30 kW Fjboq Sp Hzou Tb R Negb Hydraulic system motor power: 2.2 kW Working rotor length: 800 mm Rotor diameter: 300 mm Number of movable knives on the rotor: 46 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece Hydraulic system equipped with an oil cooling system External bearing The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, ASSEMBLY TILTING TABLE Fsbu Tb Rovx Ng So Njgb with automatic, pneumatically retractable rollers Table top made of stainless steel pipe 3,000x1,900mm Base frame used, completely blasted and newly powder-coated. All bearings, cylinders, guides, rollers, pneumatics and stainless steel pipes are new.

Condition: good (used), Year of construction: 2003, operating hours: 40,364 h, Functionality: fully functional, clamping force: 2,200 kN, screw diameter: 43 mm, clearance between the columns: 510 mm, column diameter: 115 mm, displacement volume: 351 cm³, injection pressure: 2,454 bar, mold height (min.): 210 mm, ejector force: 50 N, ejector stroke: 220 mm, opening stroke: 630 mm, plate width: 860 mm, plate height: 860 mm, overall weight: 14,000 kg, heating capacity: 13.1 kW (17.81 HP), pump power: 30,000 W, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, SANDRETTO NOVE S 220/860 injection press from 2003 Fgsbu Tb Rsvy Tpte Njb

Condition: excellent (used), Year of construction: 2019, Plasticizing system Krauss Maffei CX machine screw diameter 50 mm Fsbu Tb Rev Au T Ej Negb injection volume -432 ccm injection weight -393 g practically new - used for testing in the tool shop

Condition: good (used), Year of construction: 2008, GRAEWE 6-belt pipe puller BA500-6 up to D=500 mm Fobovzratsu Tb R Negb

Condition: good (used), Year of construction: 1995, operating hours: 30,919 h, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 460 mm, column diameter: 85 mm, displacement volume: 318 cm³, injection pressure: 1,926 bar, mold height (min.): 155 mm, ejector force: 50 N, ejector stroke: 160 mm, opening stroke: 500 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,980 mm, total width: 1,500 mm, total height: 2,080 mm, overall weight: 7,000 kg, heating capacity: 12.8 kW (17.40 HP), pump power: 22,000 W, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, Injection press SANDRETTO OTTO 150/612 SEF 100 in good working order Fgobuovy Th As Tb R Nsb

Condition: excellent (used), Year of construction: 2005, ENGEL DUO 3550H / 330L / 1000 2 F injection molding machine Year of manufacture - 2005 Clamping unit Clamping force [kN] 10000 Clearance between tie bars (hxv) [mm] 1400 x 1150 Min./max. mold height [mm] 492 - 1092 Maximum opening width [mm] 2292 Injection unit Screw diameter [mm] 105/30mm (screws with special barrier cover) Magnetic mold assembly tables Injection volume [cm3] 3053/100 Fsbev Au N Hou Tb R Njgb Injection weight [g] 2775/90.9 Electric-hydraulic equipment Pump motor rated power [kW] 75 Heater power [kW] 45

Year of construction: 2008, Condition: good (used), GRAEWE PS500 inline pipe saw up to D=500mm Fsbu Tbovzq Uis R Njgb

Condition: excellent (used), Year of construction: 2010, operating hours: 20,150 h, Functionality: fully functional, clamping force: 3,200 kN, screw diameter: 55 mm, clearance between the columns: 650 mm, column diameter: 130 mm, displacement volume: 658 cm³, injection pressure: 1,985 bar, mold height (min.): 200 mm, ejector force: 87,000 N, ejector stroke: 130 mm, opening stroke: 710 mm, plate width: 980 mm, plate height: 980 mm, total length: 7,540 mm, total width: 1,910 mm, total height: 2,310 mm, overall weight: 14,000 kg, heating capacity: 16.7 kW (22.71 HP), pump power: 37,000 W, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, Injection press SANDRETTO NOVE 1300HP/320 from 2010, production activity of PE containers for bodywork painting. Fgjbjvy Tddsu Tb R Nsb Machine equipped with a masterbatch doser and three-phase power supply

Year of construction: 2017, Condition: as good as new (ex-display), • Technical products + speed control Fgebuevzq R Rs Tb R Nsb • Suitable for pipes from 4.5 up to 25 mm OD

Condition: ready for operation (used), Year of construction: 2001, Ø 710-1000mm range PVC pipe production line. Fjbuevzqy Se Tb R Nsgb