Year of construction: 2013, Condition: ready for operation (used), Clamping force: 250kN, distance between tie bars: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, screw diameter: 25mm, injection volume: 49cm³, injection weight (PS): 45g, injection pressure: 2000bar, cores: 2+5, heating zones: 12, pump hours: 2388h, automatic operation: 1600h. Including Multilift H with B-axis, clean room module. Fobva I Notyax Ej Ispg

Condition: ready for operation (used), Year of construction: 2008, A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible. Fpebvaot Eu Azo I N Ieg

Year of construction: 2003, Condition: ready for operation (used), Clamping force: 13000kN, tie bar distance X/Y: 1600mm/1250mm, installation height min./max.: 650mm/1400mm, opening stroke: 1680mm, screw diameter: 100mm, stroke volume: 3900cm³, control: Unilog B4, operating hours: 44450h. Including linear robot Bettenfeld R15, Euromap, Europaket, various interfaces, various Mouldmaster and core pulls. 1x core pull valve and flat surface nozzle defective. Documentation available. Fsbva I Njt Eu Dle Ispg

Year of construction: 2012, Condition: ready for operation (used), Installation height min./max.: 200mm/550mm, opening stroke: 350mm, closing force: 350kN, screw diameter: 20mm, distance between tie bars: 270mm, max. injection volume: 31cm³, operating hours: 61737h. Documentation available. On-site inspection is possible. Fsbot E Tq Deva I N Iopg

Year of construction: 2013, Condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1000kN, screw diameter: 35mm, distance between tie bars: 420mm, max. injection volume: 144cm³, operating hours: 54164h. Documentation available. On-site inspection is possible. Fjbvjt E Trbja I N Ispg

Year of construction: 2016, Condition: ready for operation (used), Cooling capacity: 14.4kW, permissible min./max. temperature TS: +6°C - +20°C, refrigerant: lled water temperature at inlet/outlet: 15°C/10°C, ambient temperature/air inlet: 35°C.Length: 1100mm, width: 750mm, height: 1100, empty weight: approx. 220kg. Fsbjrxunbsva I N Iopg

Year of construction: 2018, Condition: ready for operation (used), Number of heating cartridges: 24, heating cartridge average and length: 12.5mm/200mm, power: 630W, 230V, including resistance thermometer type PT100, heating time to 350°: 40min. Dimensions X/Y/Z: 1900mm/2100mm/3040mm, weight: approx. 2200kg. Documentation available. Fsbva I Netp Naco Ijpg

Condition: ready for operation (used), Year of construction: 2009, There are 3 identical Maag FSC 160 screen changers available. Screen diameter min./max.: 600mm/200mm, screen area min./max.: 28cm²/314cm², throughput min./max.: 100-1700kg/h, max. temperature tolerance: 300°C, operating pressure: 700bar, differential pressure: 100bar. Documentation available. Fpjbjtt Slyjva I N Isg

Year of construction: 2005, Condition: ready for operation (used), Flange diameter: 160mm, clamping force: 1600kN, tie bar distance: 520mm/520mm, min. mold diameter: 350mm, min. mold installation height: 300mm, opening stroke: 650mm, platen distance: 950mm, ejector stroke: 150mm. Screw diameter: 45mm, injection pressure: 2336bar, stroke volume: 318cm³, nozzle radius: 15mm, injection volume: 134cm³, injection weight: 289g. Machine dimensions X/Y/Z: approx. 4900mm/1600mm/2200mm, weight: approx. 7400kg, operating hours: approx. 71187h. The machine has an unknown defect. Documentation available. An on-site inspection is possible. Fpsbsuabq Tjva I N Ijg

Year of construction: 2022, Condition: ready for operation (used), A Getecha plastic granulator is available. Rotor diameter: 300mm, cutting width min./max.: 400mm/1260mm, number of rotor knives: 5, power: 5.5kW. Including an enlarged control cabinet. Overhauled with less than 100 operating hours. Documentation available. Fsbva Ioucw S Ee N Iepg

Year of construction: 1999, Condition: ready for operation (used), Clamping force: 2000kN, tie bar distance: 520mm/520mm, platen size: 715mm/715mm, min. installation height: 250mm, max. platen distance: 900mm, max. opening stroke: 650mm, max. ejector stroke: 225mm, max. ejector force: 66kN. Screw diameter: 45mm, injection weight: 240g, injection pressure: 250bar, stroke volume: 254cm³. Machine dimensions X/Y/Z: approx. 6500mm/1700mm/2200mm, weight: approx. 6700kg, control: Selogica 3.090, operating hours: over 100,000h. On-site inspection is possible. Fpsbvaovnd Txe I N Ieg

Year of construction: 2014, Condition: ready for operation (used), An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible. Fpjbvaeuy T Nqo I N Iog

Year of construction: 1997, Condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Fpsbvorc Hibea I N Ijg

Year of construction: 2015, Condition: ready for operation (used), There is a complete pultrusion line with three Krauss Maffei RimStar Nano pumping machines, three creels, ABUS column-mounted slewing jib crane and a KraussMaffei EW 2300 CFI winder, tensile force: 10t, max. profile dimensions: 300x50mm, max. speed: 4m/min, on-site inspection is possible. Fjbsriurbeva I N Iepg

Year of construction: 2011, Condition: ready for operation (used), A rotational molding machine consisting of 2 rotational units and an oven in between. Rotation unit: Weight: 7500kg, weight with load: 11500kg, on 8 350mm x 350mm base plates. Rotation unit diameter: 3300mm. Compressed air nozzles: Pneumatic connection: 1inch, water connection: 0.5inch, 6bar, height: 1500mm. Oven: Dimensions X/Y/Z: approx. 5800mm/4200mm/6800mm, weight: approx. 27000kg, max. temperature: 400°C. Documentation available. Fpobvaer Eqvdo I N Isg

Year of construction: 2009, Condition: ready for operation (used), Clamping force: 1000kN, column distance X/Y: 420mm/420mm, mold height min./max.: 200mm/800mm, platen size X/Y: 620mm/620mm. Screw diameter D25/D35: 25mm/35mm, max. injection volume D25/D35: 90cm³/173cm³, max. injection pressure: 2500bar, injection speed: 160mm/s. Including various accessories, including D25 and D35 units. Dimensions X/Y/Z: approx. 4500mm/2200mm/1700mm, weight: approx. 5300kg, control: Arburg Selogica, operating hours: 1798h. Documentation available. Fpjbvjtthr Nja I N Isg

Condition: ready for operation (used), Year of construction: 2008, A Krauss Maffei linear device (handling) for injection molding machines is available. Travel X/Y/Z: 1500mm/2500mm/4000mm, load capacity: 30kg, vacuum: 4x, compressed air: 3x, weight: approx. 650kg, operating hours: 69100h. The Y-axis is slightly skewed. Documentation available. On-site inspection is possible. Fpebva Iju St I Ds N Ieg

Condition: ready for operation (used), Heating output: 2000W, ultrasonic frequency: 40kHz, weight: 275kg. Fpjbva Ievvu N Hj N Iog

Year of construction: 1993, Condition: ready for operation (used), An agglomerator for processing plastic shredded material is available. Output LDPE: 500kg/h, output OPP: 300kg-400kg/h, output TPO: 300kg-400kg/h, control: Siemens S5-95U. On-site inspection is possible. Fpobva I Nsu U Nqwo Isg

Condition: ready for operation (used), Year of construction: 2008, A complete StyroDesign EPS cutting system is available. The Styrodesign EPS cutting system is ideal for precise cutting of foam materials. Equipped with modern STYRODESIGN software, it offers optimum material utilization through advanced cutting path definition and nesting techniques. Documentation available. Fpsbva Ietndwxs N Iog

Condition: ready for operation (used), Year of construction: 2006, Power: 1.5kW, materials: plastic/aluminum, intended use: welding and machining processes, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1800mm, weight: approx. 150kg. Including accessories. On-site inspection is possible. Febvsukhz Ija I N Ispg

Year of construction: 2002, Condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Fsbveum U S Eja I N Ispg

Year of construction: 2013, Condition: ready for operation (used), Five KLN and Rudholzer welding and hot riveting machines are available. 1/2) KLN WNA-W, year of construction: 2012/13, power: 11kW, frequency: 25kHz, machine dimensions X/Y/Z: approx. 2700mm/2000mm/2500mm, control: Siemens Simatic S7. 3/4/5) Rudholzer hot riveting machine, year of manufacture: 2016, control system: Siemens PLC. On-site inspection is possible. Fpsbva I Neugmxvj Ieg

Year of construction: 2018, Condition: ready for operation (used), Cutting circle diameter: 240mm, cutting chamber opening X/Y: 465mm/330mm, rotor knives: 3 x 2, stator knives: 2, motor power: 5.5kW, throughput: approx. 100kg-160kg/h, machine dimensions X/Y/Z: approx. 1400mm/900mm/800mm. Including feed device (diameter: 96mm, width: 150mm), dancer arm extrusion, angle sensor and vector FU. Documentation available. Fpobveucw Tcoa I N Ieg

Year of construction: 1990, Condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Fpjbva Ijvw Aqhe N Iog