Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 500 mm, injection weight: 250 g, opening stroke: 900 mm, Including robot - LR 100 TECHNICAL DETAILS Control: MC 4 with color monitor, integrated control panel and plate station Closing system: Fully hydraulic Screw diameter: 45 mm Suitable for: Thermoplastics Closing unit Closing force: 1,500 kN Clamping plates (H x V): 780 x 790 mm Free space between the columns (H x V): 500 x 500 mm Maximum opening width: 900 mm Injection unit Screw diameter: 45 mm Injection volume: 275 cm³ Injection weight: 250 g Injection pressure: 1,878 bar Electro-hydraulic equipment Pump motor power: 30 kW Heating element power: 16 kW ROBOT - Krauss-Maffei linear robot LR 100 Load capacity: < 10 kg (gripper + drives + parts) Loading side: opposite the operator X-axis (stroke from mold): 550 mm (servo motor) Y-axis (vertical stroke with motor brake): 1,200 mm (servo motor) Z-axis (lateral stroke): 1,500 mm (servo motor) C-axis (folding axis for depositing): 0-90° (pneumatic) Torque (Md): 30 Nm Position measurement: encoder MACHINE DETAILS Net weight (with control cabinet): 7.1 t Deb Hc I Asvzrmgj Teut Machine dimensions (L x W x H): 4.66 x 1.51 x 2.19 m

Year of construction: 2025, Condition: new, Functionality: fully functional, machine/vehicle number: ZSK27mV, The following elements and quantities are available for sale: 4x conveyor element/conveying element 22/11 – 8027-05.21-022/011-24 10x conveyor element/conveying element 22/22 – 8027-05.21-022/022-24 Duebjvytdks Hc I A Tot 6x conveyor element/conveying element 22/33 – 8027-05.21-022/033-24 6x conveyor element/conveying element 33/16.5 – 8027-05.21-033/00165-24 10x conveyor element/conveying element 33/33 – 8027-05.21-033/033-24 10x conveyor element/conveying element 44/22 – 8027-05.21-044/022-24 10x conveyor element/conveying element 55/27.5 – 8027-05.21-055/027.5-24 10x kneading block/kneading element KB30/7/22 SAM – 8027-05.27-307/022-27 12x kneading block/kneading element KB30/5/11 – 8027-05.26-305 / 011-24 12x kneading block/kneading element KB30/5/22 – 8027-05.26-305 / 022-24 6x Mixing elements SME 22/22 – 8027-05.92-388/022-64 Material: 1.2379 - X153CrMoV12 (CPPU) Available immediately.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,590 h, Functionality: fully functional, Equipment: documentation/manual, Corrugator-Shuttle system , ITIB MACHINERY INTERNATIONAL s.r.l. for producing Double wall corrugate pipe, HDPE and PP , with outside corrugated and inside smooth layer Description of the equipment • Model: Corrugator F700 - shuttle system Molds: 7 dimension of mold blocks . Each dimension include 9 pairs of molds. Dsb Hc Isv E Nwdo A Tjut Die head: 7 die heads - Each dimension has its own die head Cooling mandrels : 7 pcs - Each dimension has one cooling mandrel for SN 8

Condition: good (used), Year of construction: 2012, operating hours: 10,624 h, clamping force: 1,200 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 1.24 bar, ejector force: 16,000 N, ejector stroke: 100 mm, plate length: 400 mm, plate width: 710 mm, input frequency: 50 Hz, input current: 400 A, Equipment: documentation/manual, ENGEL insert 650H-120 injection molding machine Stock no.: 503503 Manufacturer: ENGEL Type: insert 650H-120 Control unit: CC200 Year of manufacture: 2012 Operating hours: 10624 h Technical data closing side Clamping force: 1200 kN Plate size h x v: 710 x 400 mm Installation height min.: 400 mm Plate distance max.: 750 mm Opening stroke: 350 mm Ejector stroke: 100 mm Ejector force: 16 kN Centering fixed plate D: 125 mm Dsb Hcovbgw Ho I A Tjut Technical data injection side Screw diameter: 50 mm Stroke volume: 392 ccm Injection pressure: 1240 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 230 min Plasticizing flow: 343 g/s PS Number of heating zones: 5 Nozzle path: 550 mm Equipment On-screen text German On-screen text English Air valve 1x Leveling elements Closing side vertical Interface for inking unit Mold heating 8x

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, clamping force: 2 kN, screw diameter: 50 mm, BILLION 200 T injection molding machine Reference : Hercule H780/200 Year: December 2000 Type of order: DIXIT 500 Screw diameter: 50 mm Dsb Hc I Aou Iyyxo Tout 8 Mould heating zones 2 hydraulic cores 1 Pneumatic core 1 Blowgun

Condition: excellent (used), Year of construction: 2006, operating hours: 10,542 h, Functionality: fully functional, clamping force: 10 kN, screw diameter: 160 mm, clearance between the columns: 1,090 mm, displacement volume: 14,654 cm³, injection pressure: 1,250 bar, injection weight: 15,970 g, opening stroke: 1,200 mm, plate width: 1,628 mm, plate height: 1,580 mm, total length: 15,300 mm, total width: 3,700 mm, total height: 4,300 mm, overall weight: 63,000 kg, heating capacity: 110 kW (149.56 HP), pump power: 155,000 W, input voltage: 400 V, Equipment: documentation/manual, Closing force: 1000 T Between columns: 1090 x 1090 mm Opening stroke: 1100 mm Mold thickness: 500-1100 mm Screw diameter : 160 mm Injectable volume: 14654 cm3 PVC injectable weight: 15970 gr Injection pressure: 1250 bars Pump power: 45 + 55 +55 kw Oil tank: 3050 L Dusbjlcdk Eo Hc I A Tst Machine dimensions: 15.3 x 3.7 x 4.3 + DAL MASCHIO robot Machine dismantled, transport by 3 trucks: -20T -22.3T -20.5T Charging included

Condition: ready for operation (used), Year of construction: 2008, operating hours: 42,000 h, Functionality: fully functional, machine/vehicle number: 61012448, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, injection weight: 140 g, ejector stroke: 150 mm, opening stroke: 600 mm, TECHNICAL DETAILS Control: MC5 with color monitor, integrated control panel and 3 USB ports Screw diameter: 35 mm Design: Scuff protection for thermoplastics Non-return valve: Yes Nozzle: Open nozzle Clamping unit Mold clamping force: 1,100 kN Mold opening force: 70 kN Mounting plates (H x V): 745 x 770 mm Column spacing (H x V): 470 x 470 mm Mold opening stroke: 600 mm Dob Hcsvzrkfs I A Tsut Mold height: 300 mm Plate opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection unit Screw diameter: 35 mm Injection pressure: 2,429 bar Injection volume: 154 cm³ Injection weight (HP): 140 g Screw revolutions (standard/option): 390 / 490 rpm MACHINE DETAILS Working hours: approx. 42,000 h Machine weight (with control cabinet): 5.8 t Machine dimensions (L x W x H): 4.5 x 1.6 x 2.1 m Pump motor power: 18 kW Heating power: 10.97 kW Cylinder heating zones: 5 Drying cycles according to Euromap: 1,850 / h Oil tank capacity: 489 l

Condition: ready for operation (used), Year of construction: 2001, Krauss Maffei KM 5C WIN Grinding force 50 tons Year 2001 Dsb Hc Ijix N Tro A Tsut Screw diameter 25mm Injection weight 56 g

Condition: excellent (used), Year of construction: 2019, operating hours: 9,900 h, Functionality: fully functional, Injection molding machine Engel VC200/50 Year of manufacture 2019 / approx. 9900 operating hours Engel control system Total height: approx. 1,800 mm Total length: approx. 3,800 mm Total width: approx. 1,500 mm Total weight approx. 2,900 kg Clamping force 500 KN Screw diameter 30 mm Table ejector stroke 100 mm Injection pressure 200 bar Heating zones 4 10x heating channel / core pull on ejector side Djb Hjvx T U Tsc I A Tout Opening stroke max. 400 mm Robot pneumatics Engel ER-USP5 (year of manufacture 2019) Dryer Motan Luxor CA 15

Condition: good (used), Year of construction: 2004, Functionality: fully functional, clamping force: 350 kN, screw diameter: 18 mm, clearance between the columns: 280 mm, displacement volume: 23 cm³, ejector force: 26,000 N, ejector stroke: 100 mm, plate length: 450 mm, plate width: 460 mm, total height: 2,000 mm, overall weight: 2,750 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 530 mm, Equipment: documentation/manual, injection moulding machine DEMAG concept 35/280-80 warehouse no.: 503175 manufacturer: DEMAG type: concept 35-280-80 controller: NC4 year of construction: 2004 technical data clamping unit clamping force: 350 kN distance between tie-bars h x v: 280 x 280 mm size of mould plates h x v: 460 x 450 mm min. mould height: 180 mm Deb Hc Isvbgnrs A Tsut max. open daylight: 530 mm opening stroke: 350 mm ejector stroke: 100 mm ejector force: 26 kN centering diameter of moving platen: 110 mm centering diameter of fixed platen: 110 mm weight of mould: 230 kg technical data injection unit screw diameter: 18 mm swept volume: 23 ccm injection pressure: 2868 bar screw length: 20 l/d screw stroke: 90 mm plasticising rate: 3 g/s PS injection rate into the open: 68 g/s PS number of heating zones: 4 nozzle stroke: 170 mm measures & weight measures of machine l x w x h: 3.42m x 1.38m x 2m total weight: 2750KG equipment included screen text german CEE-socket 16A air valve 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A

Year of construction: 2003, Condition: ready for operation (used), Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device. Dob Hc I Aemrri Do Tout

Year of construction: 2001, Condition: excellent (used), BI-MATERIAL injection molding machine Main injection group screw diam 70, volume 1212 cm3 Vertical annex injection group, screw diam 35, volume 170 cm3 Hydraulic core : 6 Dujboiw Ia Ss Hc I A Tet Air blast : 2 Interface robot Accumulator on main injection Mold pressure sensor pre-equipment 32 hot runner control zones Electric motor on main unit screws Automatic tie bar extraction Between columns 1025 x 1025 mm (large platens)

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 164225, clamping force: 600 kN, screw diameter: 35 mm, clearance between the columns: 450 mm, mold height (min.): 600 mm, plate width: 720 mm, TECHNICAL DETAILS Closure system: Hydraulic Closure force: 600 kN Plate size (table size): 720 mm Distance between the columns: 450 mm Mold height: 600 mm Djb Hc Iovzrhds A Tout Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 kN Injection system Screw diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2,400 bar MACHINE DETAILS Total weight: 5,300 kg

Condition: good (used), Year of construction: 1999, Engel ES 7 K Closing 1000 tons Year 1999 Scrow 105 mm Displacement 4160 cm3 Number of heating zones including nozzle 7 Pump drive power 130 KW Clamping force 1100 tons Dueb Hc Ijlyr Awe A Tet Opening stroke 1100 Tool installation height min-max Bar spacing 1400x1150 Machine softened 64 tons + 18 tons

Year of construction: 2007, Condition: ready for operation (used), Hydraulic operating pressure: 275bar, weight: 4.1t. Duob Hc I Aom Ncizj Tst

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 7154 - 0118, clamping force: 800 kN, clearance between the columns: 750 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 600 mm, TECHNICAL DETAILS Control: NC 4 control, DIAS Closing system: Hydraulic Closing force: 800 kN Distance between columns: 420 mm x 420 mm Plate dimensions: 590 mm x 600 mm Mold size (min.): 250 mm Bar width: 420 mm Maximum opening distance: 500 mm Dueb Hevzrf Noc I A Tot Maximum distance between plates: 750 mm Two-component system Horizontal system: Nitrided screw, diameter 18 mm Vertical system: Bimetallic screw, diameter 25 mm MACHINE DETAILS Motor power: 18.5 kW Heating power: 8.8 kW Machine dimensions (L x W x H): 3.9 m x 1.4 m x 1.9 m Weight: 4,100 kg EQUIPMENT - Two-component injection molding machine with hydraulic closing system - Complete machine history available

Condition: repair required (used), Year of construction: 2002, Demag Ergotech 1 system Dob Helxnmnec I A Tjut Closing 100 tons Year of manufacture 2002 Scrow 40mm NC5 control

Year of construction: 2004, Condition: ready for operation (used), Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software. Duob Hcjp S Srho I A Tst

Condition: used, Year of construction: 1992, Arburg 370C-1 Closing 100 tons Dujb Hcsm Sg Dls I A Tjt Year 1992 Scrow 35 mm Bar spacing 37x37

Year of construction: 2010, Condition: ready for operation (used), Pneumatic pressure: 8bar, connected load: 2kW, weight: 550kg, without documentation, spare parts or accessories, was maintained regularly. Duebemccwfj Hc I A Tet

Year of construction: 2004, Condition: ready for operation (used), Connected load: 104kVA, operational hours counter: 18,775h, the chain of the chain rail system was replaced in 2018. Djbel Ax Tvs Hc I A Teut

Year of construction: 1999, Condition: ready for operation (used), Connected load: 2000W, weight: 80kg. Djb Hsmnpx Roc I A Teut

Condition: ready for operation (used), There are three identical machines available, including documentation. Dusb Hc I Aom Rg R Aj Tjt

Year of construction: 2003, Condition: ready for operation (used), There are two identical presses available, max. stroke speed: 200mm/s, oil viscosity: 46cSt a 40°C, max. hydraulic/operating pressure: 25/ 210bar, weight of the half tool: 10t, pump power at 75/ 210bar: 200/ 70l/min, pump motor power: 30kW, weight: 25t. Dueb Hc Ijivt R Aj A Tjt

Year of construction: 2003, Condition: ready for operation (used), Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling. Dob Heiiv Aqsc I A Teut