Condition: as good as new (ex-display), Year of construction: 2025, SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Medium smoke and dust Fsb Emjdqzcvj Nidepg Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Technical data Procedure 2-speed Filter type disposable filter Filter surface approx. 20 m ² ᐳ 99% filtration efficiency Filter material of non-woven polyester Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Motor 1,1 kW Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Year of construction: 2019, Condition: ready for operation (used), A Peddinghaus cutting and notching system for mitre cutting and weld bevel preparation is available. The main component of the system is the CNC 5-axis notching machine Peddinghaus SACM-1250/A, year of manufacture: 2019. The system is suitable for small to medium-sized steel construction. Intended use: Standard notching, flange thinning, web openings and other common notching shapes. Documentation available. On-site inspection is possible. Feb Eswgnglom Nidopg

Condition: like new (used), Year of construction: 2008, operating hours: 23,412 h, Functionality: fully functional, KMT SV 100 HP S high pressure pump Sold in overhauled condition. Fobonab Ere Em Nidspg new pressure intensifier, new control and new HP pump Oil/air cooling available ( Pictures are condition )

Year of construction: 2020, Condition: new, MDP-01 SPOT WELDER 10 kW High-performance transformer 5 levels of power regulation Possibility to work with 2 x 230V (380V) power supply Bottom sliding handle The range of welded sheets: 0.4 + 0.4 to 2 + 2 mm Width: 490mm Fpob Em Nijfwxr Tjdjg Length: 1010mm Height: 1100mm Weight: 130kg Power supply: 380V / 3phase / 10kw

Condition: ready for operation (used), Year of construction: 2001, Robotic 3D welding station consisting of a welding robot and two rotary tables. Dimensions of rotary tables: 2000mm x 1000mm Includes: - 2 x rotary tables with 3-phase SEW-EURODRIVE motors - dimensions of the rotary tables: 2000mm x 1000mm - welding wire feeding station included. - 7-axis OTC Daihen IRB-651 robot manipulator with a linear track, teaching panel and OTC Daihen Corporation L5561 control cabinet - OTC Daihen Digital Pulse CPDP-350 Power supply for the welding robot inverter - 3-phase isolation transformer - NORATEL 3LT20.0-400/200-23 - 3-phase transformer DAIHEN W-L00557 - Documentation of the OTC Daihen robot. The stand is ready for launch. Fsb Em Nsp Am T Uoidspg

Condition: used, FP150, TBH, extraction and filter system Model: FP 150 Condition: Used Fpjb Em Nijhii Rcsdsg

Year of construction: 2006, Condition: used, Technical data: Application: Laser, plasma and oxy-fuel cutting, grinding & welding Materials: Steel and stainless steel sheets, dry and oil-free Cartridges / solenoid valves: 6 / 6 Nominal volume flow: 3,600 m 3 /h (with cartridge load of 600 m³/h) Filter area: 84 m² (21 m² per cartridge) Dust collecting container Air input diameter: 300 mm air outlet diameter: 350 mm Air temperature/humidity: < 60 ° C / < 50% Permissible concentration of oil: 3 mg / m ³ Compressed air: min. 6-7 bar at the feed point, dry and oil-free Compressed air consumption: Max 18 nm ³/h - ± 50 NLiter per pulse with max 6 per minute Filtration degree: 99.99% Fpeb Emjdfbkno Nidsg Dust emissions: < 1 mg / m ³ Cabinet: 400 V, 3-phase, 50/60 Hz Control unit: 24 VAC, 50 Hz Noise level: < 73 dBA ± 2 dBA plus pulse charge of < 10 dBA ± 2 dBA Colour: RAL 5015 width x depth: 1.305 x 1.382 mm Weight: 640 kg Engine: 7.5 kW 13.2 A 32 A 4.234 PA 6,500 m3/h 2.635 mm 2,870 mm

Condition: new, Year of construction: 2025, Here are the main features, functions and benefits of the welding positioner: Characteristics: 1. Versatility: The PS-360 positioner is a versatile auxiliary tool that can be used in various types of assembly and welding works. 2. Automated processes: The machine can be used in partially automated production processes, which contributes to increased work efficiency. 3. Welding in the optimal position: The device allows welding of cylindrical elements in the optimal position, which translates into safe, fast and accurate welding. 4. Solid construction: The solid construction of the machine ensures its durability and strength, which increases the quality of the work performed. 5. Tilt adjustment: The rotator disc can be tilted from 0 to 90 degrees, giving you the flexibility to adapt it to a specific job. 6. Regulation of rotational speed: The possibility of smooth regulation of the rotational speed of the turntable allows it to be adapted to a specific application. 7. Pedal control: The device is equipped with a pedal that allows the welder to control the positioner's operation. Advantages: 1. Increased work efficiency: Thanks to the ability to rotate cylindrical elements in the optimal position, welding works become more effective. 2. Reduce production costs: Automated or facilitated part rotation can reduce production time and costs. 3. Repeatability of work: The device helps maintain the repeatability of the joints made, which is important in production. 4. Flexibility: The positioner is flexible in use and can be adapted to various tasks. 5. Improved working conditions: Allows the welder to work more comfortably and ergonomically, which translates into improved working conditions. Fsb Emorigmgj Nidspg Set contains: 1. PS-360 positioner device. 2. Control pedal. 3. Power cable. 4. User manual. 5. Mast with welding fixture. The CORMAK PS-360 positioner is a useful tool in industries that require rotation and positioning of elements in assembly and welding processes. This helps increase efficiency, reduce costs and improve the quality of work performed. Technical parameters: Rated load 100kg Worktable size φ360 mm Tilt angle 0°～＋90° Rotation speed 0.2 ~ 5 rpm Rotational power 120W Manual tilt Voltage 220V-1PH-50HZ Weapon support Dimensions 530x550x500 mm Weight 49 kg *three-jaw chuck is not included in the set

Condition: used, Year of construction: 2003, suction capacity: 3,600 m³/h, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. 4 Kw fan. Capacity - 3600m3/h year of production : 2003 Feb Eorwm Izjm Nidepg

Condition: excellent (used), Year of construction: 2018, PLA-65A PLASMA CUTTER The machine, which is able to make fast, precise and high-quality cuts up to 25 mm, was specially developed for manufacturers of ventilation ducts, advertisers and customers using thin sheets. Together with the economic price, this machine CNC plasma cutting machines equipped with ergonomic functions have become an indispensable helper for customers in this matter industry. Technical data: Hypertherm Powermax plasma source Power: 65A Max power consumption 11 kw Speed m / min 20 X / Y / Z 1500 3000 150 working area Weight: 1000 kg Loudness: 69 dB (A) Dimensions: Length: 3700 mm Width: 2200 mm Foboizahmj Em Nidjpg Height: 1300 mm Equipment: Source - power hypertherm max 65A Controler CNC +THC PC computer

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, total height: 2,500 mm, total width: 1,000 mm, total length: 3,500 mm, input voltage: 400 V, Lorch V300 Automatic TIG Welding/Cladding Overlay Rig with Adjustable Column and Boom. 300A, auto wire feed, arc voltage control, DC, water cooled, up/down, in/out position control, flexible torch. All working and in excellent condition, training can be provided on collection. Warranty 6 months. Fjb Em Njwdpu Ejidopg

Condition: excellent (used), The TBi PenFeeder is a feed drive for TIG and plasma welding. It is a machine-independent addition to any TIG welding station and helps to make manual TIG welding faster and more efficient. It thus offers practical time, efficiency and cost advantages for industrial production. Feb Em Nog Uwb Ueidspg

Year of construction: 2019, Condition: ready for operation (used), This PTR Strahltechnik EBW PS 4-1 60-6 CH was manufactured in 2019. A reliable laser welding machine, it represents an excellent opportunity for those seeking high-quality welding capabilities. Contact us for more information about this machine. Fpjb Em Nswbw Egoidjg Application Types Other Sheet Metal Machinery

Condition: excellent (used), Suitable for butt welding of series parts Fpsbev H Rwnj Em Nidjg Welding ranges wire: Ø1-9 mm (steel < 0.25% C), Ø1-6 mm (steel > 0.25% C) Welding ranges tape: 3 - 50 mm² Smallest thickness: 0.25 mm largest width: 50 mm With manual The machine has been cleaned, checked and is ready for immediate use. The butt fusion machine is in very good condition.

Condition: good (used), Year of construction: 2016, operating hours: 3,890 h, filter area: 222 m², suction capacity: 20,000 m³/h, IVAT 20000 m3/h filter ventilation tower Industrial welding hall filtration - numerous technological processes in production plants, mainly carried out in metalworking. Suction from the top and draft-free exhaust from the bottom - exactly to the workplace. The principle of layered filter ventilation, the device does not require the installation of pipelines. Cartridge filter inserts - self-cleaning by means of compressed air pulses during operation. Filter cleaning by means of pressure difference - no loss of compressed air. The principle of layered ventilation: contaminated air is sucked in from the top, filtered and then released at floor level as clean air suitable for breathing without generating drafts, at a speed below 1.2 m/s. Exactly where employees inhale it. And this in a wide range of 270 degrees. The tower operates in accordance with the principle of layered ventilation, recommended by trade unions and considered the best type of air circulation. Brand: IVAT Model: Air FTower-20.000 Year of production 2016 Working hours: 3890 Parameters: 15 kW fan Fsb Emovrgbte Nidepg Air flow 20000 m3/h Filter surface 222 m2 6 cartridge inserts Built-in frequency converter. Additional final fine filter with an area of 65 m2 in filtration class F9 gives us higher air purification efficiency and additionally protects the fan in the event of damage to the main filter. Dust drawer with a capacity of 200 l. Very quiet operation 75 dB (A) Purification degree - > 99.9 % Stock no.: 0944

Condition: used, Year of construction: 2014, machine/vehicle number: 950144105510003, Lg.No. 25044 Welding mist filter system with spark pre-separator + extraction arms Technical specifications - Upright design for filtering welding mist + grinding dust - Welding fume class "W 3" - Suitable for filtering welding fumes from steels with chromium + nickel content of over 30% - Exhaust air can be vented into the work area, e.g., for heating, or outside - TEKA control system - Air flow rate up to approx. 5000 m³/h - Max. static pressure up to approx. 3000 pa - 4 BIAM filter cartridges - Pulse Jet cleaning method with separation efficiency > 99% Fob Emjwgd A As Nidjpg - Separate control cabinet - Connection 400 V / 5.5 kW - Space requirement of filter cube approx. W 850 x H 3150 x D 850 mm - Weight approx. 380 kg

Condition: new, Year of construction: 2025, Functionality: fully functional, laser power: 30,000 W, working range: 13,000 mm, total length: 16,800 mm, total height: 5,120 mm, total width: 2,200 mm, workpiece weight (max.): 2,000 kg, positioning accuracy: 0.03 mm, warranty duration: 24 months, input voltage: 380 V, input frequency: 50 Hz, repeat accuracy: 0.02 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 13,050 mm, travel distance Z-axis: 450 mm, Equipment: cooling unit, All New Full Cover Fiber Laser Cutting Machine | GS-CE PRO Series | 6000-40000W MACHINE AVAILABLE ON HAND This GS-CE series FULL COVER FIBER LASER CUTTING MACHINE offers maximum safety for metals cutting. Thanks to its full cover structure and protective glass observation window, you can observe the operation and avoid hazards such as laser radiation, sparks, etc. It also has a fast exchange table, and the exchange is within 10s. It will be your ideal solution for safe and efficient metal cutting! Working platform size: 4000mm*2000mm Laser power 6KW-40KW Fjb Esv Hnl Ajm Nidjpg GS-4020CE PRO Intelligent anti-collision function Automatic lubrication Laser fault alarm Cooling fault alarm Laser protection glass Water cooler TÜV CE certificate Optional function: automatic loading and unloading system Control unit supports graphic formats: AI, BMP, Dst, Dwg, DXF, DXP External programming System complete incl. cooler, extraction system and safety light barriers

Condition: ready for operation (used), Year of construction: 1989, machine/vehicle number: D205228, Heinrichsglueck H-36 welding positioner Fully functional. Fjb Ejuiac Hom Nidepg Square table 1050x1050mm. The set includes a remote control with adjustment of table rotation speed and inclination (135 degrees). New power and control cable.

Condition: new, Year of construction: 2024, table length 1000 mm table width 1000 mm table height 200 mm weight 300 kg Our welding tables are manufactured with HT 300 casting quality. All welding tables are also available in a nitrided version. • Plate thickness: 25mm All our tables are equipped with adjustable legs. Fpsbsuia N Te Em Nidsg The minimum adjustment range is 620 mm, the maximum 665 mm. Thus, a working height of 820 - 865 mm is possible. Further details on the production and characteristics of our tables can be found in our catalogue. The illustrations do not correspond to the original size and are for llustration purposes only. 3D welding table - 3D clamping devices - 3D precision welding table

Year of construction: 2022, Condition: ready for operation (used), A 2-in-1 HMB pipe grinding machine is available. Roller diameter: 18mm/23mm/30mm/38mm/40mm/48mm/63mm/74mm, chip collection tray suction nozzle diameter: 100mm, sanding belt type: K36, sanding belt dimensions X/Y: 100mm/2000mm, pipe diameter range: 20mm-76mm. The machine has only been used twice for test purposes and is partly in its original packaging. Includes two chip trays and one sanding belt. Documentation available. On-site inspection is possible. Feb Emowgc Abe Nidopg

Condition: new, welding current max. 70 A cutting capacity max. 25mm mm open-circuit voltage 120 V Required air-pressure min. 4 bar connected load 9,2 kW connected load frequency 400 V Fjb Eswfyq Hjm Nidjpg weight 0,28 kg Dimensions (LxWxH) 1,7 x 1,0 x 1,2 mm

Condition: used, Year of construction: 2007, operating hours: 5,931 h, Functionality: fully functional, laser power: 3,200 W, For sale – TTM-Bystronic tube laser cutting system Fpsb Emowg Ey Nj Nidog Sold by an active company, with a fully functional and regularly maintained system. Manufacturer: Tube Tech Machinery Model: FL 250 2D Year of construction: 2007 Cutting technology: 2D CO₂ tube laser Laser source: Brand: Trumpf Model: TLF 3200 Power: 3.2 kW Type: CO₂ Laser operating hours: 22,456 Beam emission hours: 5,931 Maintenance: Preventive maintenance always performed twice a year by authorized Trumpf technicians.

Condition: new, Year of construction: 2025, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Fpsb Em Nisvvx Hpsdeg Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Year of construction: 2014, Condition: ready for operation (used), Cutting dimensions X/Y: 3048mm/1524mm, max. sheet dimensions X/Y: 3000mm/1500mm, max. workpiece weight: 890kg, positioning speed X/Y: 80m/min, simultaneous positioning speed: 113m/min, max. axis acceleration: 4.5m/s², max. Cutting speed: 50m/min, position deviation Pa: +/-0.1mm, position spread Ps: +/-0.05mm, edge detection accuracy: +/-0.5mm, laser source: ByLaser 4400, wavelength: 10.6µm, laser power: 4400W (4.4kW), pulse frequency range: 1Hz-2500Hz, max. Sheet thickness steel/stainless steel/aluminum: 25mm/20mm/12mm, system dimensions X/Y/Z: approx. 11500mm/6500mm/2350mm, machine weight: approx. 13000kg, laser source dimensions X/Y/Z: approx. 2900mm/950mm/1600mm, laser source weight: approx. 1600kg, operating hours: approx. 27729h. Documentation available. On-site inspection is possible. Fob Em Newgc Aneidspg

Condition: new, Year of construction: 2025, table length 4000 mm table width 2000 mm table height 200 mm weight 2400 kg Manufacturer: GERD WOLFF Fjb Em Njuia I Nsidspg Technical Details: • Length 4000 mm • Width 2000 mm • Height 200 mm • Weight 2400 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table