Condition: used, Spot welding machine, projection welding machine ARO Type MA 350 DC Mach. No. MA35031332 / 9731122B110 Year of manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Max. cylinder stroke: 80 mm Max. electrode force: 730 daN (at 6 bar), continuously adjustable Operating air pressure: 0.5 to 6 bar Mains connection: 400 volts, 50 Hz Connected load: 75 kVA / 63 amps / Cable cross-section: 3 x 16 mm² Max. possible sheet pairing: 5 mm + 5 mm - Welding control: ARO Micro 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module Dolimcyjhpf Iys Ujkl - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently attached to the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: ready for operation (used), Year of construction: 2019, General Data Machine weight 260 kg Main Drive Number of axis 6 Additional Equipment High Pulse Welding Power Source Kit: Phases: 3*400V / Operating Range: 20-450A / Welding Voltage: 15-36.5 V / Protection Class: IP23 / Programs: MIG/MAG, Pulse ARC, MMA/s /Components: Torch, cables, wire feed mechanism, wire spool with bracket. Automatic Burner Cleaning Station: Functions: Pneumatic cutter for nozzle cleaning, wire cutting, silicone foaming. Djlimcyjvxbpre Ujkl This 3-axis KUKA KR8 R2100-2 arc HW was manufactured in 2019. Ideal for precise and efficient automation tasks, this welding robot is a robust option for industries requiring high reliability and performance. Consider the opportunity to buy this KUKA KR8 R2100-2 arc HW welding robot. Contact us for more information. Application Types Robotics

Condition: good (used), 1 used TIG welding machine, make EWM Type Tetrix 351 Synergic FW technical data Welding power 350 A at 100% duty cycle Version water-cooled Dkjlou Ub Dpjimcy Usl ready to weld with TIG torch shielding gas regulator ground cable

Condition: used, Year of construction: 2000, filter area: 15 m², suction capacity: 1,400 m³/h, Welding fume extraction, dust extraction, self-cleaning, pneumatic, vacuum filter by Plymovent. Model: M1 "The MobilONE" For welding, grinding, sandblasting and all types of dry dust. Cartridge filter insert. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Year of manufacture: 2000 Fan with a power of 1.1 kW - single-phase Efficiency 1400 m3/h Filtration area 15 m2 arm length 3 m Dkelimcjv Hzdxoy Ujl stock no.: 0965

Condition: good (used), Year of construction: 2008, Offer 23354 Hydraulic Welding Turntable and Tilt Table – Three Axis – Welding Positioner Technical Specifications: - Maximum load capacity 1500 kg - Faceplate diameter 700 mm - Minimum table height in horizontal position approx. 780 mm - Maximum table height in horizontal position approx. 1300 mm - Working height manually adjustable in 3 steps - Faceplate motorized rotation - Faceplate hydraulically swivels or tilts + height adjustable - Electric rotation movement Continuously adjustable speed approx. 0.01 - 2.0 rpm - Right and left rotation - Welding current transmission approx. 500 A - 400 V drive - Connected load 2.5 kvA - Hand-held remote control for speed - Electric foot switch Dkjlimjv Tkxfocy Uol - Space requirement approx. W 1600 x H 780 x D 850 mm - Weight approx. 750 kg

Condition: good (used), Power: 15 KVA Dkjlimcem Twicsy Uel Execution: 530 mm

Year of construction: 2022, Condition: new, Turntable Load: 1.000kg (1.200kg horizontal) with a center of gravity of 200mm from the faceplate Faceplate diameter: 800mm with 4 T-slots Faceplate speed: 0.05-1.5rtm Torque face plate: 1,800Nm Tilt angle: 0-135 ° Welding current transmission: 800A Dolsgn Ecrsimcy Uokl Operation: Two-pedal foot switch and button on the switch cabinet

Condition: excellent (used), Year of construction: 1994, input voltage: 230 V, filter area: 42 m², suction capacity: 1,800 m³/h, Welding fume extraction, dust extraction, self-cleaning, pneumatic, vacuum filter by Castolin. Model: GoodAire 1800 For welding, grinding, sandblasting and all types of dry dust. Dkolimcsv Hxkcsy Uol Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Fan with a power of 1.1 kW - single-phase Efficiency 1800 m3/h Large filtration surface - 42 m2 HEPA filter for more thorough air cleaning Spark catcher Auger for emptying dust 2 inlets with a diameter of 200 mm each. Stock no.: 0968

Condition: as good as new (ex-display), Year of construction: 2023, Motorized height adjustable tilt and turn table Maximum load: 500kg Djlimsd H I Nfocy Ujkl Faceplate diameter: 600mm Stroke: 600m Operation: Foot switch and push button on control cabinet

Condition: used, Year of construction: 2003, suction capacity: 3,000 m³/h, negative pressure: 3,000 Pa, Welding fume extraction, dust extraction, self-cleaning, pneumatic, vacuum filter TEKA Cartmaster . For welding, grinding and all types of dry dust. Cartridge filter insert. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Djljv Hxadsimcy Uokl Year of manufacture - 2003 Fan with a power of 1.5 kW. Efficiency 3000 m3/h Vacuum max 3000 Pa Stock no. - 0956

Year of construction: 2023, Condition: as good as new (ex-display), Technical data:- Load capacity: 1500kg- Own weight: 300kg- Insertable workpiece diameter: approx. 50 - 3000 mmm- Roll diameter: 250mm- Roll width 50mm - Rotation speed approx. 100 - 2,000 mm/min- Two-pedal foot switch potentiometer for stepless speed control Djlisd Iuqlemcy Uekl

Condition: as good as new (ex-display), High vacuum extraction system for welding torches and soldering stations. IFA approved: tested in accordance with the W3 standard. Ideal for welding fume extraction directly at the source (torch extraction) and as a soldering station extraction system thanks to its high vacuum performance. Easy to operate thanks to the intelligent SPS control. Speed adjustment from 30 to 100%. High extraction power thanks to a continuous duty motor controlled by a frequency converter. Technical parameters of the device in the last photo. Djlimcevc U Rwoy Ujkl The device is in very good condition (new, never used)

Condition: new, Year of construction: 2023, Hydraulic height adjustable rotary tilt table Maximum load: 1.000kg Faceplate diameter: 850 mm Speed of face plate: 0,05- 1,0 rpm length / width: 1.800mm / 1.450mm Height faceplate horizontal: 800mm - 1.275mm height faceplate vertical: 625mm - 1.100mm Operating devices: 2-pedal foot switch/ turn LEFT/ RIGHT hand-held remote control: Djlimcyjh T Dafs Uekl Turn LEFT/RIGHT/STOP, speed controller (potentiometer) for stepless speed control, pushbutton tilt FORWARD/BACK, pushbutton lift UP/DOWN Operation at the control cabinet: Pushbutton "DEVICE ON Selector switch "MANUAL/FOOT OPERATION Main switch "ON/OFF

Year of construction: 2017, Condition: excellent (used), Compact high vacuum unit that can be used as central vacuuum cleaner for cleaning or hand tool connection. Compressed air cleaned filter unit with timer control built together with side channel blower in sound enclosed cabinet and mounted on strong transport platform. Plug & Play model HFU-F is with built-in frequency converter and motor with thermal fuse. HFU/HFU-F: Air volume: Max. 1,050m³/h - 50 Hz Max.1,275m³/h - 60 Hz Vacuum: Max. 32,000Pa - 50 Hz Max. 35,000Pa - 60 hz Filter area: 13m² Description filter unit type CJF • Polluted air is led into unit through tangential inlet in raw air chamber top. Hereby downflow and pre-separation by cyclone effect are ensured, which contributes to load reduction on the filter media itself. • Air is filtered through vertical-placed filter cartridge with internal filter core, which optimizes cleaning effect. • Timer-controlled filter cleaning by integrated compressedair system with pressure tank and jet valve. • The clean air is led out through ø125mm-connection (muff measurement) in cabinet top. Sound is damped by channel silencers on outlet integrated in unit. • Dust is collected in dust container in unit bottom. Quicklockadjustable dust container system suspended in ø400mm system flange. Description side channel blower type KMS • Side channel blower is placed on vibration absorbers in Dkolimcoiqgr Sjy Uol sound enclosed cabinet. • Vacuum limiter mounted on inlet. • Guided cooling air by cooling ribs in cabinet

Year of construction: 2022, Condition: new, Height adjustable L manipulator Load: 500kg Stroke: 640mm, height faceplate min. 480, max. 1.110mm Pivoting range: +/-185 face plate diameter: 800mm Welding current: 400A Torque face plate: 900Nm Torque swivel arm: 900Nm Total length: 2.495mm Height: 1.855mm Width: 900mm The rotary stand is controlled by a hand-held remote control with the following functions: - LIFT arm - arm LOWER - Arm swivel RIGHT - Arm give LEFT - Potentiometer for the stepless SPEED- adjustment of the faceplate For the control of the face plate a two-pedal foot switch is available with the functions: - face plate rotation RIGHT Dolimcysh Td The Uskl - face plate rotation LEFT

Year of construction: 2022, Condition: new, Height adjustable rotary tilt table Load: 500kg Stroke: 1.015mm, height faceplate min. 345, max. tilt angle 120°. Delimcoh Tfbzsy Uekl Face plate diameter: 800mm Welding current: 400A Torque face plate: 1.300Nm Total length: 2.365mm Height (housing): 1.030mm The rotary tilt table is controlled by pushbuttons on the machine housing with the following functions: - LIFT arm - Arm LOWERING - Potentiometer for the stepless SPEED- adjustment of the face plate For the control of the face plate a two-pedal foot switch is available with the functions: - face plate rotation RIGHT - face plate rotation LEFT

Year of construction: 2022, Condition: new, Load capacity: 10.000kg Speed: 0.03- 1.6 rpm faceplate diameter: 1.500mm, expandable to 2.500mm welding current transmission: 800A Delefxgp Ujimcy Uokl

Year of construction: 2022, Condition: new, Technical data: - load capacity: 10.000 kg - Own weight: 850kg - Insertable workpiece diameter: 50 - 3500 mm - Roll diameter: 250mm - Roll width 160mm - turning speed approx. 100-2.000 mm/min - Two-pedal foot switch Dslsfxw H Aeimcy Ujkl - Potentiometer for infinitely variable speed control

Condition: new, Year of construction: 2023, Manipulator with hydraulic height adjustment, faceplate with clamping slots and manual remote control. Height (faceplate horizontal): approx. 670 - 2,400mm Swivel range of face plate: approx. +-360°. face plate dimensions: Ø1.200mm x 40mm, 6x clamping slots Rotational speed of main axis: approx. 2.0 rpm (other Torque main rotary axis: approx. 13.000 Nm Dolsnqzt Asimcy Ujkl Speed of face plate: approx. 0.2-2rpm Torque face plate: approx. 10.000 Nm

Year of construction: 2023, Condition: as good as new (ex-display), Technical data:- Load capacity: 15000 kg- Own weight: 960kg- Insertable workpiece diameter: approx. 50 - 3200 mm- Roll diameter: 250mm- Roll width 240mm - Rotation speed approx. 100-2,000 mm/min- Two-pedal foot switch- Potentiometer for stepless speed control Dsled Iuqasimcy Uekl

Year of construction: 2022, Condition: new, Manipulator with two height adjustable outriggers and face plate. Load: 1.500kg stroke: 800mm swivel range: 300 face plate diameter: 1.000mm Welding current: 600A Dkelimcyjfnku He Uel

Year of construction: 2020, Condition: new, Hydraulically height-adjustable tilt and turn table Dslimced H Hzbsy Ujkl Maximum load: 2.500kg faceplate diameter: 1.200 mm Stroke:1,050 mm

Year of construction: 2022, Condition: new, - Load capacity rotating stand: 1.000 kg - Machine body: Sheet metal construction made of quality steel, - length/width 1.000mm x 1.180mm Dkslimcyjfxw Dcj Uol - height 2.220mm - Stroke face plate (vertical): 700-1.400mm - diameter of face plate: 600 mm - Chuck: M-WPS500 - Machine weight (DSH): 1,400 kg - Face plate speed: 0.1- 2 rpm Operation on the control cabinet: Selector switch: Turn foot switch or Button on the control cabinet Turn: LEFT/RIGHT Lift: UP/DOWN) Potentiometer for infinitely variable speed control Foot switch: Turn: LEFT/RIGHT welding current transmission: 600A

Year of construction: 2023, Condition: new, Rotating device for a component load of 40.000kg. Applicable component diameter: 500mm-6.000mm. Rotating speed 100-2.000mm/min. Control via hand remote control (radio control on request). Dolisflmcxjmcy Ujkl

Year of construction: 2022, Condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, face plate with clamping slots and manual remote control. Height (face plate horizontal): approx. 532 - 1.132mm Lifting distance/lifting time (hydraulic): approx. s = 600mm, t = 20s Swivel range of face plate: approx. +-300°. Dkolimcyefw Ah Rs Usl Height (Pl.-sch.vertical axis): approx. 709mm Dimensions face plate: Ø1.200mm x 40mm, 6x clamping slots Speed of the main axle: approx. 2.0 rpm (other Torque main axis of rotation: approx. 7,500 Nm Face plate speed: approx. 2.5 rpm Face plate torque: approx. 1,500 Nm