Condition: used, Year of construction: 1984, Used machine Year of construction: 1984 Machine is completely overhauled Table size 1100 x 880 mm drive motor pole-changing 5/6 kW Spindle speeds 3000/4500/6000/9000 rpm Manual height adjustment via handwheel Manual swivel adjustment via handwheel Height adjustment of the milling spindle 110 mm Angular adjustment of the milling spindle -5° to45 °; mounted on both sides Reversing switch for clockwise and counter-clockwise rotation with 3-roller feed unit Febewhuicju Tfy Sepg without Aigner table extensions Availability: by arrangement Storage location: Hochheim

Condition: excellent (used), Year of construction: 1986, Used, good condition Make: Altendorf Type F45 Year of manufacture: 1986 Machine No. 86-4-143 GS-tested Motor: 5.5 kW Carriage length: approx. 2500 mm Cutting width: approx. 800 mm Pivotable up to 45° Saw blade diameter: 450 mm Parallelogram guard Miter stop Extraction connection: D 80 and 120 mm Space required: approx. 2500 mm x 1600 mm x 1500 mm Febuowhgd Sj Tfy Sepg Weight: approx. 1000 kg Storage location: 54634 Bitburg, Germany, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: used, Year of construction: 2021, Working dimension X: 4.140 mm Working dimension Y: 1.570 mm Working dimension Z: 275 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Main motor power: 13 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 25 Linear tool changer: Yes Tellerwechsler 13-fach: Yes Vertical drilling spindles: 17 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction, in Y-direction BIESSE Drilling aggregate BH 29 2L: Yes Fpobu Tewbankefy Seg Gantry machine: Yes Machine table: Pod and rail table BIESSE Machine table ATS: Yes Three stop ranges: Yes Electronic supervision of the end-position of the stops: Yes Workpiece support aids: Yes Number of consoles: 8 Pneumatic pipe connectors: an den Konsolen BIESSE Preparation for Uniclamp: Yes Positioning aid: Yes BIESSE SA machine table: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Barcode reader: Yes Safety device: Bumper Chip conveyor: Yes Interface for .dxf data: Yes Control cabinet cooling: Yes UPS - Uninterruptible Power Supply: Yes Automatic lubrication: Yes Remote control: Yes Package for abrasive materials: Yes Control: BIESSE BH 660, BIESSE bTouch Software: BIESSE B_SOLID, BIESSE BSOLID 5-ACHS-MODUL, BIESSE SOPHIA, BIESSE BSOLID DATENIMPORT Conformity marking: CE mark

Condition: used, Motor power: 9.5 HP (7.0 kW), motor frequency: 50 Hz, chain conveyor, glue heating, pressure roller, combination trimming units, pressure beam adjustment, impact shears, glue roller, Attention: Edge feed out of function, as well as both snipping units, edge has overhang at the front and rear, which must then be worked in manually Fobu Towhb Tzjfy Sepg

Condition: used, Year of construction: 1992, Offer in progress! Fpobuswh Uhfj Tfy Sjg

Condition: good (used), Year of construction: 2015, Automatic double-blade miter saw Manufacturer: A+ automation Type: T300/T350 auto Year of manufacture: 2015 Retrofit in 2023 Including vertical loader Including conveyor belt for removal Fpobuevrcbcs Tfy Sog High-speed, high-quality cuts with up to 500 frames/hour ä080525

Condition: used, Year of construction: 2009, Used machine Year of manufacture 2009 Condition: workshop overhauled, well maintained Equipment and technical specifications: - CE mark - Working height 8-60 mm - Glue thickness 0.4-12 mm - Rotating control panel with "StarTouch" PLC line control, 12" color touchscreen including "Telesolve" remote maintenance and diagnostics - Anti-adhesive spray unit in front of the milling unit - Pre-milling/joining unit "RT-E" with 2 high-frequency motors, DIA cutters, and "EASY-SIZE PLUS" device (electronically controlled infeed guide) - Glue unit "VC 1000" up to 12 mm thickness with pre-melter (replaceable rapid heating tank, Teflon coating, with second glue tank for PUR glue) Fpsbu Tfyowhulde Sog - Nitrogen storage box for PUR glue tank, fill level monitoring with sensor, "iGlue" kit for control Glue container above the desk - Cross-cut saw unit "K/SEL" with horizontal adjustment, two independent high-frequency motors, pivoting with tracer rollers and extraction hoods on both motors (controllable from the desk) - Tiltable flush trimming unit "RI/1000" 0-20° tiltable, pneumatic positioning, two independent high-frequency motors, high-performance extraction hood "ED-SYSTEM" (controllable from the desk) - Rounding unit/corner rounding unit "ROUND K" with "4 Edge" KIT, pneumatic positioning from the desk for quick edge thickness changes, two high-frequency motors, tracer rollers, unit runs on prism guides with ball-bearing pressure pads, R=2.5 mm - Scraper unit "RAS/V" with tracer rollers, R=2 mm - Sprayer for finishing, in front of the flat scraper and brushing unit - Flat scraper "RCL", tracer rollers, blower nozzles for cleaning Pneumatically controlled - "SPN" brush/buffing unit, 2 independent motors - Whitening unit/Leister hot air gun, with nozzles at the top and bottom - "AUTOSET" function, all necessary adjustments can be made from the control panel, pivoting of the miter saw blades, remote adjustment of the flush trimming units, 2 positions for the ROUND K unit, remote adjustment for the scraper unit, spacers on the infeed guide, electronic positioning of the upper pressure beam, electronic positioning of the pressure rollers, interior lighting of the cabin, all tools with reversible inserts, edge monitoring sensor, all important units are application-controlled, automatic central lubrication of the feed chain - Former list price: €104,250 Location: Langen Availability: Short term

Condition: excellent (used), Year of construction: 1986, TECHNICAL DATA: - Maximum planing width: 530 mm - Maximum planing height: 240 mm - Number of knives: 4 - Motor power: 5.5 kW Fpobu Tfyjwhf N Tj Sjg - Electric thicknessing table adjustment - Feed speed: 2 speeds - Infeed roller - Low-pressure bar - 4-knife planer block - Strip planer knives - Outfeed roller - 2 sliding rollers in the table MACHINE DIMENSIONS: - Length: 990 mm - Width: 930 mm - Height: 1080 mm - Weight: approx. 630 kg Location: arrives at warehouse in 54634 Bitburg - Available at short notice -

Condition: used, Year of construction: 2023, Workpiece width max: 455 mm Workpiece thickness max: 200 mm Workpiece length max: 13.300 mm Crosscut height: 200 mm Aggregates total: 4 Positioning cart: 2 Fpjbu Tfswa S T Nsy Sjg Number of sawing aggregates: 1 Number of milling aggregates: 3 Tool clamping system: HSK-F63 Tool changer positions: 12 5-axes technology: Yes Birds mouth cutting unit: Yes Shark cutter: Yes Scribing: Yes 4-side milling aggregate: Yes Saw for shifter cuts: Yes Printer: Yes Labelling: Yes Workpiece feed: Log carriage Control: Homag powerTouch Conformity marking: CE mark

Condition: as good as new (ex-display), Functionality: fully functional, net weight: 380 kg, Dear Sir or Madam, We are offering you a "HOLZKRAFT" vertical wood band saw. Model: HBS 633S - Quick-action saw blade tensioning system - Precision saw blade roller guide - Fast and precise cutting height adjustment via handwheel and rack and pinion with millimeter scale - Safety switch for automatic shutdown when the door is opened - Large cast parallel stop - Angle stop - Table tilt via rack and pinion and handwheel - Saw blades Technical specifications: Fpebu Tfyewhmtte Sjg Cutting height 90° max. 400 mm Maximum cutting width with stop: 570 mm Maximum cutting width without stop: 610 mm Cutting speed 1,630 m/min Saw blade length 4,600 mm Table dimensions: Table length 830 mm Table width 600 mm Table height 830 mm Table tilt 0 – 45° Machine dimensions L x W x H 119 x 82 x 206 cm Machine weight 380 kg

Condition: used, Offer in progress! Fpobu Tjwh Ug Ujfy Ssg

Year of construction: 2020, Condition: good (used), Frame Assembly Machine Manufacturer: A+ Automation Type: A5 MemoTS Year of Manufacture: 2020 This machine was designed for production frame builders who require fast assembly and frequent changeovers. Its state-of-the-art technology allows you to store a virtually endless number of programs. Fsbsu Sy T Dsu Tfy Sopg The programs can be entered by the operator or downloaded from a PC. After saving this information, the operator can select the frame to be produced via the touchscreen or by scanning with the optional barcode reader. The machine automatically adjusts, and production can resume immediately. Wedges can be driven or stacked in up to 14 positions per corner. It is a very fast and reliable machine. It can be used to assemble all types of wood, plastic, and MDF. It can connect any type of molding using special A+ steel wedges, which are manufactured in several sizes. The horizontal, vertical, and stop clamps allow for very precise tightening of the frames. A robust wedge driver ensures trouble-free operation. All types of wood, plastic, and MDF can be joined together. ä080525

Year of construction: 2015, Condition: used, STORE-MASTER 5110 automatic panel storage system used Built in 2015 Was a demonstration unit from Holz Her and only went into production with one machine in 2019 30% to 50% space savings Minimal distances between stacks (from 70 mm) = optimal use of space Excludes panel damage, panel separation control with weight measurement Fully automated process (storage/retrieval) and machine loading Adaptable for all panel formats (1.2 to 5.6 m) depending on options 90° panel rotation Low manipulator height Fjbusvdyv Ie Tfy Sopg External dimensions: Length 8.5 m, width 7.5 m Max. panel size 3.2 x 2.1 m Min. panel size 1.2 x 0.6 m Max. lifting weight 150 kg Stacking height 1.8 m, max. 2.0 m m Max. lifting height 2.1 m Travel speed: Horizontal approx. 120 m/min Vertical approx. 45 m/min. Manipulator suitable for slightly air-permeable, smooth materials such as: e.g., coated chipboard, blockboard, raw MDF, raw HDF, raw particle board (good quality) Upgrade: Vacuum capacity for suction cups on the manipulator 100 m³/h for a mixed material in the warehouse, such as MDF and raw chipboard Connected load 6 kW Vibration-damped portal bridge, manipulator head with lifting device, and steel gripper arm, space-saving due to its low design Articulated arm design with direct drive via steel belt therefore wear-free and insensitive to vibrations Electronic panel position measurement Panel rotation correction The panels are measured with sensors and neatly stacked Separation device for thin panels via integrated weight measurement Storage and retrieval location Direct loading onto the machine Warehouse software Former list price: €110,000.00 € Availability: Short-term Storage location: Flörsheim

Condition: used, machine/vehicle number: 006579, X axis working area: 3130 mm Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 6 KW Fsbu Tfepz T Saoy Sjpg Number of controlled axes: 3 axes Total number of drilling spindles: 14

Condition: used, Year of construction: 2024, Working dimension X: 2.600 mm Working dimension Y: 900 mm Fjbujwa S Rbe Tfy Sspg Working dimension Z: 60 mm Number of milling spindles: 1 Main motor power: 4,5 kW Rotation speed max: 24.000 rpm Tool clamping system: Collet Vertical drilling spindles: 10 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction BIESSE Drilling aggregate BH 17 L: Yes Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Safety device: Safety mat, enclosed cabin Control: PC control Software: BIESSE B_SOLID, BIESSE SOPHIA Conformity marking: CE mark, UKCA-Zeichen Total connection: 12 kW Weight: 1.800 kg Space requirement Length: 2,8 m Space requirement Width: 1,94 m Space requirement Height: 2 m

Condition: used, Year of construction: 2000, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 + 500 mm Feed motor 3 kW Feed speed 6-36 m/min. 1 WEINIG Unimat 23 E 4-side Planer and Moulder ----- 6 spindles (2 on the right), powerful motors, EM 11 feed magazine available Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle, bottom 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel radius 125 - 180 mm Folding device including tool Hardened table insert in front of 1st lower spindle 2nd spindle, right 11.0 kW ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??6000 rpm Tool travel radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. groove depth 35 mm Axis adjustment range 80 mm Pressure shoe in front of left spindle, including lateral roller pressure, spring-loaded 4th spindle, right 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 5th spindle, top 11.0 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. throat depth 35 mm Axis adjustment range 45 mm Split pressure shoe in front of the upper spindle, adjustable to the tool travel circle and pivoting away from the tool, spring-loaded. 6. Lower spindle 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel circle 112-250 mm Max. throat depth 15 mm Axis adjustment range 45 mm Spindles in general ----- All throat spindles with high concentricity. Lubrication points for the axial spindle movement. Spindle length of vertical spindles 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed continuously adjustable 6 - 36 m/min. Feed roller in front of the first lower tool pneumatically controlled up-down, Durofer pointed tooth rollers (Weinig patent) with Fpebu Tewh Umzsfy Seg depth gauge and self-cleaning Adjustment range of the feed rollers relative to the left spindle, axial: 35 mm Extension of the oscillating axis relative to the left spindles to 150 mm Machine electrical system ----- Operating voltage: 380-400-415 volts, 50 Hz. Machine stands, tables, and stops ----- Surface table 2.5 m long (including jointing ruler) Aluminum extension 0.5 m for surface table, including extension of the jointing ruler Manual Waxilit pump for resin removal from the table One driven rubber roller (spring-mounted in the outfeed table) Pressure elements and Guides ----- Pneumatic pressure rollers from above Pneumatic pressure rollers pivot away from above, opposite the right-hand spindles for easy tool changes Machine Operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Discharge after the upper spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindles 3 and 4 Min. working height 12 mm Electric height adjustment of the upper spindles and the feed Central position ...

Condition: used, Year of construction: 1984, Used Machine Year of Manufacture: 1984 Universal dowel drilling machine with a pivoting drilling unit with fully automatic control with two pneumatic safety clamps Drilling gear motor 2.2 kW with 21 spindles Fsbskwg Rceu Tfy Sopg Spindle pitch 32 mm with integrated oil damping Height adjustment 80 mm Drilling depth 80 mm Weight 420 kg Availability: Short term Location: Flörsheim

Condition: used, machine/vehicle number: 007871, Max. panel width: 1200 mm Max. panel length: 3200 mm Fsbu Tfowimzmey Sepg Work capacity: 25 Cycles/min Movement system: suction cups.

Condition: used, Year of construction: 2010, Working width: 630 mm Working height max: 300 mm Fpebu Tovvydpofy Sjg Number of knives: 4 Working height min: 3 mm Rotation speed: 4.600 rpm Table length: 1.100 mm Number of feed-out rollers: 1 Main motor power: 11 kW Feedrate max: 20 m/min Continuously variable feed: Yes Digital readout for thickness: Yes Segmented pressure bar: Yes Electromotoric height adjustment: with digital readout Cutter block: Barke/Brück Outfeed: Steel roller Control: FORMAT 4 POWER-DRIVE Conformity marking: CE mark Space requirement Height: 1,2 m

Condition: used, machine/vehicle number: 006574, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Fobu Tfovxxuxey Sepg Premilling Unit: yes Corner Rounding Unit: yes

Condition: used, Year of construction: 2019, Working width: 230 mm Planing height: 160 mm Number of spindles: 6 Bottom spindles: 2 Right spindles: 1 Spindles left: 1 Spindles top: 2 Spindle configuration: b-r-l-t-t-b Spindle rotation speed max 1/min: 7.000 rpm Spindle diameter: 40 mm Feedrate max: 40 m/min Continuously variable feed: Yes Feed motor: 7 kW Main motor power: 11 kW Seperate motor per spindle: Yes Motoric adjustment: Programmable controller Surface of the machine table: hard-coated Infeed table length: 2.000 mm Table rollers: driven Lubrication pump: manually Pneumatic top pressure: Yes First infeed roller controlled: Yes Type of feed roller drive: Cardanic Control: WEINIG MEMORY PLUS-SYSTEM Fpebowigumsu Tfy Seg Weight: 3.100 kg

Condition: used, Year of construction: 2022, Working dimension X: 2.500 mm Working dimension Y: 1.000 mm Working dimension Z: 80 mm Number of milling spindles: 2 Main motor power: 3,3 kW Rotation speed max: 18.000 rpm 4th axis: Yes Fsbuowigt Ns Tfy Sspg Horizontal drilling spindles in Y: 1 Cantilever machine: Yes Machine table: Feed-through technology Special workpiece clamping system: For doors Outfeed: vacuum lifter Milling for fittings: Yes Insert fittings: Yes Control: PC control Conformity marking: CE mark Space requirement Length: 9,7 m Space requirement Width: 4,1 m

Condition: used, Year of construction: 2017, Edgeband thickness max: 12 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Feedrate max: 18 m/min Electromotoric height adjustment: Yes Top pressure by belt: Yes Glue system granulate: Yes Fjbu Tfewigtvjy Sspg Spraying device: Yes Premilling unit: Yes Type: left-side machine Machine length: 5.610 mm Control: BIESSE SMART TOUCH

Condition: used, Year of construction: 2022, Working dimension X: 3.050 mm Working dimension Y: 1.250 mm Working dimension Z: 80 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Vertical drilling spindles: 15 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable, Top and bottom Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Barcode reader: Yes Dowel insertion: Yes Dowel diameter: 8 mm Dowel length max: 40 mm Safety device: enclosed cabin Milling for fittings: Lamello Clamex Interface for .dxf data: Yes Control: Homag powerTouch, HOMAG POWER CONTROL Fpebowa Skbsu Tfy Ssg Software: HOMAG WOODWOP, HOMAG tapio ready, HOMAG WOODWOP 8.0 Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 18 kW Weight: 3.975 kg Space requirement Length: 4,8 m Space requirement Width: 2,4 m Space requirement Height: 2,5 m

Condition: used, Year of construction: 2015, Working dimension X: 3.740 mm Working dimension Y: 1.570 mm Working dimension Z: 250 mm Independent Z-axes: 2 Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Main motor power: 10 kW Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 34 Vertical drilling spindles: 12 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Cantilever machine: Yes Machine table: Pod and rail table Fsbu Tfyowidzwj Sepg Number of consoles: 6 Positioning aid: Yes Laser setup aid: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Bumper Control: PC control Conformity marking: CE mark Total connection: 29 kW