Condition: used, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ..... Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ..... > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ..... > Length 4500 mm 1. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Dusbsvu Hdysu Thl Rot Transfer tape ..... Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool fli...

Condition: used, Year of construction: 2001, total height: 2,320 mm, total length: 1,410 mm, total width: 900 mm, Weight: 400 kg - Table length: 810mm - Wheel diameter: 600mm - Table width: 580mm - Year: 2001 - Documentation available: No - CE mark available: Yes - Serial number: 01/2250 - Voltage [V]: 400 Debujwgbf Ie Thl Rout - Power [kW]: 3.0 - Transport dimensions: 1415mm x 900mm x 2320mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: excellent (used), Year of construction: 1996, The SCHEER DB 4 universal dowel hole drilling machine is specially designed for drilling structural holes, drilling rows of holes in a 32-hole grid system, and drilling various types of fittings. It enables all of these tasks to be performed quickly, precisely, and without extensive setup times. Simple operation via icons and 4 program presets allows for rapid changeover to the new work process. Central adjustment of the removable side stops ensures constant flushness at the front edge and precise drilling of left and right workpieces. It doesn't matter whether the parts are cut to size or at an accurate angle. The doweled corner joint is always flush, both on the edge and on the surface! No other CNC machine can achieve this with the simplicity and speed of a SCHEER DB 4. Safety clamping device across the entire table width allows workpieces to be clamped directly to the drilling beam. Stop rail with three adjustable folding stops. Continuous table supports facilitate pushing and drilling long workpieces, while fold-up workpiece support tables facilitate row and hinged drilling. 2 drilling units Drill motor type BM 602-230/400 volts, 50 Hz, n=2860, 2.2 kW power 25-spindle drive unit Spindle pitch 32 mm For surface and end-face drilling. Gantry clearance: max. 950 mm Working length: max. 2360 mm Location: Arrives at the end of April at warehouse 54634 Bitburg Dujbov Trk Neu Thl Rot Sold as is - no warranty - no guarantee - freight prepaid -

Condition: used, Year of construction: 2012, Working dimension X: 3.280 mm Working dimension Y: 1.320 mm Working dimension Z: 170 mm Number of milling spindles: 1 Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changer positions: 22 Linear tool changer: Yes Disc tool changer: Yes Number of exchangeable units: 4 Vertical drilling spindles: 10 Debu Thlewhfdqj Rout Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Lock recess milling aggregate: Unit, changeable Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 6 Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Safety mat Two rows of stops: Yes Workpiece support aids: Yes Handheld terminal: Yes Control: BIESSE BH 660 Software: BIESSE BIESSEWORKS

Condition: used, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (length / width) 3065x1600x1900 mm weight of the machine ca. 1500 kg Löwer Leistomad SD Window single wood intermediate sanding machine ----- Machine factory tested by Löwer! Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - 1 softisc unit Ø=200mm above 0.75kW, - 1 slat roller unit L=200mm above 0.75kW - 1 soft disc unit Ø=200mm below 0.75kW, - 1 lamella roller unit L=200mm below 0.75kW, - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - Linear guidance of all grinding units via linear ball bearing sets hardened waves - Time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By immersing it is possible To be able to deliver aggregates deeper into the profiles. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter to adjust the Grinding intensity using frequency converters (separately for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fasteners for grinding discs (wood pulp) - Feed via three lower and one upper conveyor belt and spring-loaded Pressure rollers with continuous speed 5-15m/min - Parameters that can be set using the touch panel are workpiece thickness and workpiece width (left side units individually), immersion depth of side units, Spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and profile shape (Workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic clamping of the workpiece as well as retraction after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm - Workpiece height 12-120mm - Suction connection 5 x 100mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (housing) x width x height (mm): 3065x 1500 x 1600, complete length: 3800mm (including inlet roller conveyor with stop for Leistomat SD) - Weight: approx. 1500 kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Included options: Adjust the machine as follows: - max. workpiece thickness: 160mm Dusbu Thsvnv Twjl Ret - max. workpiece width: 260mm (in the transshipment process, workpieces must be 2x be allowed through) Transport belt width remains at 200mm - Side units with grinding height 120mm instead of 100mm - more powerful engines for side units 0.75kw instead of 0.37 - larger frequency converters for the side units Quick release disc spindle side for quick tool changes for DiscMaster 4TD or CrossMaster 2TD (only for clockwise rotation) Quick release disc tool for Softdisc, Combidisc or Mediumdisc Ø 250mm (only for clockwise rotation) -----...

Condition: used, Year of construction: 2019, total width: 1,850 mm, total length: 5,790 mm, total height: 1,500 mm, Weight: 1.750 kg Price: On request = Rinaldi TDF55 Double Aluminium Mitre Saw = ⚙️ Technical Specifications - Power Supply: Three-phase, 380/400V – 50/60Hz - Motor Power: 2.2 kW - Saw Blade: Ø 550 mm, 2850 rpm - Saw Head Positioning Speed: 25 m/min - Maximum Cutting Length: 4000 mm Djbuswf Uuye Thl Rjut - Minimum Cutting Length: - 135°: 200 mm - 90°: 300 mm - 22.5°: 200 mm - Mitre Angles: - External: 90° to 22.5° - Internal: 90° to 135° - Weight: 1750 kg 🛠️ Key Features - CNC control via industrial PC (Windows 10, 12.1" touchscreen) - Oleopneumatic saw feed with 15° inclination - 4 horizontal and 2 vertical pneumatic clamps - Pneumatic impulse lubrication system - Dust extraction connection (Ø100 mm) - USB 2.0 and RJ45 Ethernet ports - Multiple cutting modes: single cuts, undercuts, overcuts, etc. 📦 Standard Equipment - 2 carbide-tipped saw blades (Ø 550 mm) - Adjustable feet, air gun, service tools - Pneumatic clamps: Yes - Year: 2019 - Documentation available: No - CE mark available: Yes - Serial number: 215439 - Transport dimensions: 5790mm x 1850mm x 1500mm (l x w x h) - Transport weight [kg]: 1750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 1972, Bürkle long-belt sander with vacuum table and vacuum pump Table size approx. 2500 mm x 800 mm Manual height adjustment Without top belt cover Belt length 7200 mm Weight approx. 900 kg Dimensions approx. L x W x H approx. 3800 x 1700 x 1600 mm Dujbev Trlasu Thl Rst Location: Arrives at the end of April at warehouse 54634 Bitburg Sold as is - no warranty - no guarantee - freight prepaid -

Condition: used, Year of construction: 2023, Longitudinal traversing range: 33 m Crosswise traversing range: 13,5 m Number of rows max: 3 Places per row max: 10 Stack height max: 2.000 mm Workpiece width max: 2.100 mm Workpiece width min: 700 mm Workpiece length max: 4.200 mm Workpiece length min: 1.600 mm Load capacity: 150 kg Feedrate max: 180 m/min Infeed roller conveyor: Yes Raised storage level: Doppelstocklager Vacuum lifter: Yes Turning device: Yes Management of residual parts: Yes Duebu Tewhfc Tohl Rjt Adjustment to panel size: Yes Labelling: Yes Control: PC control Control cabinet cooling: Yes Total connection: 18 kW

Condition: excellent (used), Year of construction: 2001, Langzauner edge sander EK 3/4 top condition Accessories: some abrasives still available Veneer stop jaws Table width: 350 mm Table length: 1,000 mm Debevr Hw Iju Thl Rout Maximum sanding belt width: 150 mm Sanding belt length: 3,000 mm Belt speed: 22 m/s Main motor: 2.2 kW Motorized feed Veneer sanding Circular sanding support Oscillation Height adjustment: table, manual Sanding belt pivotable: Yes Conformity marking: CE mark Total connection: 4.6 kW Space required: Length: 1.7 m Width: 0.85 m Height: 0.9 m Location: from stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1994, Manufacturer POLZER frame press Top condition With top control Vertical cylinders: 4 Horizontal cylinders: 2 Pressing length: 3,000 mm Pressing height: 2,000 mm Pressing force: electro-hydraulic Installation: vertical free-standing Location: from stock 54634 Bitburg Dujbu Thlevr I D Ae Ret - immediately available -

Condition: excellent (used), Used, good condition Make: Kuper Type: FWJ 900 Machine No. 26118174 Projection: 900 mm Dusbev T R Tvju Thl Rjt Thread Heating: Air Space requirement: approx. 1400 mm x 600 mm x 1600 mm Weight: approx. 350 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - Free shipping, unpacked Handed over in the current condition, as seen, without warranty or guarantee

Condition: excellent (used), Year of construction: 1982, Planing width 500 mm 2-knife cutter block Planing height: 230 mm Steel feed roller, grooved Rubber feed roller 2 idler rollers in the table Motor 5.5 kW Measurement scale for height adjustment via handwheel 2 feed speeds Weight approx. 900 kg Location: Arrives end of April, Lage 54634 Bitburg Duobu Tjv Trmwohl Rot - Delivery as is - free on freight - No warranty - no guarantee -

Condition: excellent (used), Year of construction: 1990, Kölle Sizing Edge Milling Machine with Belt Feed Type: FKF For plastic panels, varnished panels, and solid wood For milling, jointing, flush trimming, and trimming improperly bonded edges This machine produces chip-free edges. Table length: 3000 mm Table height: 620 mm Milling width: 45 mm Max. chip removal: 4 mm Milling speed: 8000 rpm Milling motor: 2 HP Feed speed: 11 m/min Feed motor: 0.5 HP Chip extraction nozzle: Diameter: 100 mm Required space: 3000 x 450 mm Net weight: 400 kg Location: Arrives at the end of April at our warehouse in 54634 Bitburg - Delivery as is - no warranty - Djbov Trunju Thl Rsut - Free shipping -

Condition: excellent (used), Year of construction: 1995, Used Brand Bütfering Type AWS-1100 Machine in excellent condition - carpet in very good condition - Year of manufacture 1991 Machine No. 2127547 Working width approx. 1100 mm Passage height approx. 160 mm Number of units: 1 unit Duobov Tfykou Thl Ret Belt dimensions 1900 mm x 1120 mm Extraction connection Space required approx. 1700 mm x 2100 mm x 2100 mm Weight approx. 2200 kg Storage location: Warehouse 54634 Bitburg, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty Available end of April 2025

Condition: good (used), Year of construction: 1996, Grass ECO Press pot hole drilling machine Year of manufacture 1995 Djbujvzbuys Thl Reut Right and left stops Weight approx. 45 kg 380 V - 50 Hz - 2.5 A Pneumatic connection - max. 6 bar CE marked Location: from warehouse 54634 Bitburg - free loading Immediately available Handed over in the current condition, as inspected in Bitburg, Without guarantee, without warranty

Condition: excellent (used), Year of construction: 1993, Grass fitting and hole row drilling machine used, good condition Type BBM-R Year of manufacture 1993 Mach. No. 931137 Vertical drilling head 1st fitting 2nd fitting 3rd fitting Turret head for selecting the drill head Hole row drilling head with pins Number of spindles in a row 15 pieces with press-in die 1 piece Stop rulers Weight: 95 kg Storage location 54634 Bitburg, free loading, unpacked Djbevzb Dnou Thl Rjut Handed over in the current condition as inspected

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Debu Thev Trlmol Rout Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: excellent (used), Year of construction: 1999, Used, excellent condition, little used Debu Thlev Trlyo Reut Make: Scheer Type: FM12 - 8 - 3100 K Year of manufacture: 1999 Power: 2.21 kW Saw feed / handwheel Cutting length: 3100 mm Pneumatic clamping Rear support table Strip stop with stop finger Parallel stop Space required: approx. 4200 mm x 1200 mm x 1200 mm Location: Arrives at warehouse 54634 Bitburg, available end of April Free on freight, unpacked Sold in as-is condition, as seen, without warranty or guarantee

Condition: new, Year of construction: 2025, Holzkraft Edge Sander: KSO 150 F PRO With oscillating sanding belt for the best sanding results Item number: 5390020 Brand: Holzkraft Sanding unit can be pivoted using a hand crank The welded steel machine stand guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be optionally activated Granite-coated sanding sole for a longer sanding belt service life Height-adjustable sanding table for utilizing the entire sanding belt width Additional table with extraction openings for sanding radii on the rubberized guide roller Sanding sleeve device with attachable work table The spring-loaded belt tension automatically compensates for belt length differences With adjustable stops, ideal for veneer sanding The grooved veneer stop allows the veneer overhang to be adjusted Duobu Thlev Sk Nnj Rst TECHNICAL DATA Dimensions and Weights Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Net weight approx. 300kg Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 100mm Worktable(s) Worktable length: 950mm Worktable width: 450mm Worktable height adjustment: 110mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Oscillation motor power: 0.11kW Sanding unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt rotation speed(s): 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Sanding surface width: 150mm Sanding unit pivoting 0 – 45° SCOPE OF DELIVERY 1x Sanding Belt K100 5x Rubber Rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding Sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm On-Board Tool Kit Miter Gauge

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Duobu Thlov Sk Tme Rot Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: excellent (used), Year of construction: 1984, Joos Veneer Press - Top Condition - Gold anodized heating plates Safety step bar Pressing area: 2500 mm x 1100 mm Opening: 400 mm Heating: Electric Dobev Tfzzju Thl Rsut Plate surface: Gold anodized Pressing pressure: 90 t Number of cylinders: 4 Current consumption: approx. 33 A Machine length: 3000 mm Machine width: approx. 1400 mm Weight: 2750 kg Location: Arrives at the end of April at the warehouse in 54634 Bitburg - Free on freight - Handed over as is - no guarantee - no warranty

Condition: excellent (used), Year of construction: 2000, Eumacop band saw type: ER 600 - very good condition - Model ER 600 Machine type band saw Year of manufacture 2000 Technical data Roller diameter: 600 mm Passage width: 585 mm Passage height: 395 mm Total height of the machine: 2,115 mm Maximum saw blade width: 35 mm Maximum saw blade length: 4,725 mm Main motor: 2.2 kW Top roller guide APA Bottom roller guide APA Version: left-hand machine Conformity marking: CE mark Total connection: 2.2 kW Weight approx.: 275 kg Space requirement Length: 0.75 m Debjvr H Nwsu Thl Rjut Width: 1.1 m Height: 2.22 m Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 77 panel saw - new stock machine - Equipment: T 7710/1-a saw unit 1 x 46 degrees T 7725/2-a cutting height 205 mm T 7715/3-a drive power 7.5 KW infinitely variable T 7730/3-a trimming table length 3.0 m T 7735/3-a cutting width 1350 mm T 7743-a parallel stop electronically controlled and can be lowered to the end position Debsvn Ef Nju Thl Rjut T 7750-a electrical preparation for retrofitting a scoring unit T 7780/1-a table extension at the rear 610 x 860 mm Location: from stock 54634 Bitburg - available immediately -

Condition: ready for operation (used), Year of construction: 1991, Manufacturer: OSMEKA Model: HZ 2100 Machine type: Chopper Year of manufacture: 1991 Operational status: Still connected Technical specifications: Chopping unit speed: 650 rpm Number of shafts: 1 Screen hole diameter: 10 mm Main motor: 15 kW Automatic reverse start-up Debu Tev Trm Dohl Rjut Replaceable individual blades Top loading Chopping tool: Strip blade Weight: approx. 960 kg Space required: length: 1.7 m Space required: width: 1.2 m Space required: height: 1.5 m Location: Still in operation. Arrives at the end of April at warehouse in 54634 Bitburg. Sold as is - as seen - No warranty - no guarantee - free on freight.

Condition: not inspected (used), Year of construction: 1996, Edge banding machine IMA Compact S 312 Year of manufacture: 1996 Trimming unit, radius, bevel, flush trimming unit, profile scraper, flat scraper, buffing unit Location: Arrives at the end of April at warehouse 54634 Bitburg - Free shipping - Dujbjv Tkv Reu Thl Ret Sold as is, without warranty.