Condition: used, Year of construction: 2016, Functionality: fully functional, load capacity: 3,200 kg, Rotator Load center of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Duslswhtfpsip T Dtjt Condition: Ready for use and fully functional Technical condition: Very good Description: Comes from a Still RX 70-35 with approximately 1,800 hours of operation.

Year of construction: 1989, Condition: used, Axis 3 Delip Tjwhqz Us Dteut serial number 84095 tool taper BT40 toll turrets 12 table surface area 1300 x 400 mm no. of flutes 3 T-Nuten T-slot - width 18 mm control FANUC dimensions ca. 3000 x 2500 x 2500 mm

Condition: used, Used machine Used Ganner Compact 30 line boring machine Dujlip Tewhuh Sj Dtot Equipment and technical data: 2 drilling beams with 15 spindles each Pitch 32 mm Position adjustment drilling unit 0 - 650 mm Distance between the rows of drill holes at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Clamping height of the workpieces max. 70 mm Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Location: Solingen

Year of construction: 2018, Condition: ready for operation (used), Additional Equipment Main Cutting Disc Motor Power (kW): Max 23 kW Number of Pneumatic Clamps on Pusher: Max. 9 Patented Rotating Support Table Duelip Tswhgp Ie Dtet This MACMAZZA Top Saw was manufactured in 2018. Ideal for precise panel cutting, this panel saw represents a reliable choice for your woodworking needs. Contact us for more information. Application Types Sawing

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 Dolipjvtm Aye T Dtsut pneumatic hold-down device, pressing device, stop rulers

Condition: new, Year of construction: 2023, Molding edge banding machine Year of manufacture 2023 with direct gluing to the edging material Workpiece thickness 8 - 50 mm Edge thickness 0.4 - 3 mm Workpiece width min. approx. 30 mm Workpiece length min. approx. 200 mm Electrical connection 230 V Total connection 3 kW Heating power glue pool ca. 2,7 kW Pneumatic connection 6 bar inner radius 25 mm (special designs possible) Weight approx. 165 kg Working height approx. 885 mm Delip Tol Ebyls Dtjut Dimensions approx. 810 x 610 x 885 mm without foil plate Availability: Short term Storage location: Hochheim

Condition: new, Bench drill OPTIMUM D 23 Pro-Set OPTIdrill - Exhibition machine - ----- Technical data ----- Number of speeds: 12 steps, Speed range: 200 - 2,440 rpm, Spindle stroke: 80 mm, throat depth: 180 mm, Table size: 280 x 245 mm, max. drilling capacity in steel: 25 mm, Motor: 750 watts, Columns Ø: 73 mm, Dimensions (LxWxH): 615 x 330 x 1,015 mm, Weight: 63.5 kg, Spindle holder: MK 2 Bench drill with V-belt drive - Industrial motor - User-friendly safety switch in accordance with IP 54 - Digital drilling depth and speed display integrated in the housing - Separate emergency stop switch - Precision spindle bore - Safety electrics with 24 V DC voltage - Guaranteed concentricity of less than 0.02 mm measured in the drill sleeve - Drill spindle with precision ball bearings - High-quality quick-action drill chuck - Drilling depth stop - Precisely machined, stable drill table with diagonal T-slots running diagonally and circumferential cooling water channel - V-belt cover with safety switch - One-piece cast aluminum Dslip Tou R S Exs Dtsut Die-cast quill lever with soft-grip handles - Largely dimensioned, height-adjustable safety screen with safety switch - Heavy-duty design of the entire machine - GATES quality belt - Right/left rotation -- Scope of delivery Quick-action drill chuck 1 - 16 mm Morse taper MK 2 / B16, T-nuts Special offer set including machine vice BMS 100 - new exhibition machine -

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Hydraulic presses for gluing of construction timber, blockboards Small space requirement and front loading Chassis on wheels, two of which are steerable are steerable Height-adjustable hydraulic cylinders with practical and functional Vertically adjustable uprights with frame pressing device Dujlip T Dokwhb Hetjt Technical data: Work surfaces: 1 Usable dimensions: 2500 x 1800 mm Number of vertical hydraulic cylinders with manual adjustment: 3 Number of horizontal manual hydraulic cylinders: 2 Travel of hydraulic cylinders with manual adjustment: 60 mm Pressure of the hydraulic cylinders with manual adjustment: 1500 kg Positioning dimensions approx. 3200 x 800 x 2200 mm Location: Hochheim Availability: short term

Condition: excellent (used), Software license HOLZHER cutting optimization OptiBase / HHOS -used- Dolipowhx Nae T Dtout Office version OptiBase / HHOS, incl. activation DataMatrix, incl. activation of remnant storage, incl. activation label printing, incl. activation for data transfer Quality info: - Tested for proper function

Condition: used, Used machine with rigid spindle Spindle diameter 30 mm Duolip Tjwiar Es Dtst Clamping length approx. 120 mm Speeds 3000/2000/6000/10000 rpm Clockwise and clockwise rotation with 4-roller feed unit Availability: Short-term Storage location: North Rhine-Westphalia

Condition: new, Bandsaw HOLZKRAFT HBS 433 - Exhibition machine - Saw blade guide top, Saw blade guide at bottom, Delipeu R S Ako T Dtsut Quick clamping device via eccentric lever ----- Technical data ----- Rollers Ø: 430 mm, max. cutting height: 270 mm, max. cutting width with fence: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, Table size: 610 x 431 mm, Table inclination: -10 - +45 °, Motor 400 V: 1.5 kW, suction nozzle Ø: 2 x 120 mm, Cutting speed: 900 / 450 m/min, Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: 3 band saw blades 6 / 16 / 25 mm - new exhibition machine -

Condition: new, Year of construction: 2021, New machine Year of manufacture: 2021 Equipment and technical data: Dimensions and weights Length (product) ca. 1170mm Weight (net) approx. 660kg width/depth (product) ca. 1003mm Connection suction Suction port diameter thickness 150mm Installation information Space requirement length 1170mm Machine body width/depth 705mm Space requirement width/depth 1003mm Working area length 1000mm Space requirement height 1197mm Working area width/depth 2000mm Explanation of space requirement The dimensions take into account maximum travels or useful clearance to working area. Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Machine body length 1170mm Thickness Thickness table length 520mm Working height thickness max. 250mm Thickness table width 1000mm working length thickness min. 210mm Working height thickness min. 3.5mm Chip removal max. thickness 8mm Electrical data Power drive motor 7,5kW Mains frequency 50Hz Supply voltage 400V Planer shaft type TERSA Planer shaft speed 4500min¯¹ Planing shaft diameter: 120mm max. planing width: 520mm Number of planing knives: 4pcs. Feeding speed: 5/8/12/18m/min Duelipokwg Uns T Dtet Location: Hochheim Availability: Short term

Condition: excellent (used), JET DDS225 Cylindrical Grinder - Used - Closed base cabinet with storage space Dujlip Tov U Anze Dtjt ----- Technical Specifications ----- Grinding width: 635 mm, Max. workpiece thickness: 133 mm, Min. workpiece thickness: 0.8 mm, Min. workpiece length: 230 mm, Grinding drum diameter: 152 mm, Feed speed: 2/3 m/min., Speed: 1,400 rpm, Motor: 5.5 kW, Extraction nozzles: 2 x 100 mm Quality information: - Complete basic cleaning - Electrical system checked - Adjusted according to manufacturer's specifications - Ready for immediate use

Condition: new, Year of construction: 2015, Carpentry plane new device Year of construction 2015 from dissolution Dolijr D Tvpop T Dteut The innovative chip ejector with excellent chip removal thanks to increased air flow and innovative air guidance banishes blockages caused by wet wood shavings to the past! The solid cast construction weighs only 13.2 or 12.5 kg thanks to its consistent lightweight design. The powerful MAFELL alternating current motor offers sufficient reserves. Planing becomes an experience! As with most MAFELL machines, the intelligent control electronics keep watch in the background. For soft start and constant speed under load, as well as for a machine-friendly speed reduction when idling and for overload protection. Scope of delivery 1 reversible blade, 1 pair of carbide steel; order no. No. 091696 1 open-end wrench 8 mm; order no. No. 093258 1 connecting cable 4 m; order no. No. 087323 Planing width 248 mm chip removal 4 mm in cardboard box Technical data chip removal0 - 4 mm Planing shaft Ø74 mm Nominal idle speed8500 1/min Rated power consumption2300 W Universal motor230 V / 50 Hz Planing width Weight18.3 kg Availability: short term Storage location: Hochheim

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Dsliju R S Ersp T Dtout Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new exhibition machine -

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Condition: Well maintained (serviced annually) Operating hours: Approx. 7000 Equipment: Basic machine Accura 1558 Performance with belt bridge Incl. air cushion table with long infeed ruler Incl. guide system BS703 Incl. edge feed 1901 fully automatic Dolip T Dovymfzotout Incl. joint milling unit FG 701 MOT 2 HSK 32 R Incl. Glujet 301 automatic adhesive application system Incl. printing unit DW701 MOT Incl. trimming unit KA702 pneumatic Incl. multifunctional package: Milling unit FR 701 Multi Corner copying unit FF701 MULTI Radius scraper ZK701 MULTI Incl. flush milling unit 1828 MOT 2 to 20 mm Incl. surface scraper FK 701 aggregate NT 701 Incl. buffing unit Incl. spray device at the inlet and outlet New price in this configuration over 200T€ Location: Czech Republic Availability: Short term

Condition: new, HOLZKRAFT sc 2c sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Speeds: 4,000 rpm, max. saw blade Ø: 315 mm, Cutting width with rip fence: 900 mm, Duolipou R Sy Ne T Dtst Cutting height 90/45°: 100 / 79 mm, cutting length: 1,600 mm, Swivel range: 90 - 45 °, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new exhibition machine -

Condition: used, Year of construction: 1996, Used machine Year of construction: 1996 Equipment and technical data: Spreading unit consisting of: -roll and fixed length magazine -roll separator -glue applicator -pressure zone Heating system: Glue basin Dslipevymddj T Dtsut Cross-cut unit Jointing unit Universal trimming unit Scraper unit Buffing unit Buffing unit Workpiece thickness: 10-55 mm Workpiece length: min. 160 mm Workpiece width: min. 65 mm Edge thickness: 0.4 - 12 mm Roller cutting: 3 x 45 mm Feed rate: 13 m /min. Pneumatics: 7 bar Availability: Short term Storage location : Flörsheim

Condition: new, Drilling and milling machine OPTIMUM OPTImill MB 4 - Exhibition machine - This offer is an equipment package. The following items and options are already included in the price: Duolou R Tfteip T Dtot - OPTImill MB 4 Optimum precision drilling and milling machine - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: new, Year of construction: 2022, Band saw Year of manufacture 2022 Work table 1000 x 720 mm Work table height 980 mm working table inclination 0-20 Dusliomxp I Aop T Dtjt Motor 3,0 kW Cutting height max. 450 mm Cutting width max. 720 mm Saw wheel diameter 740 mm saw band speed 1540 m/min saw band length 5340-5420 mm Precision guide top and bottom Suction nozzle diameter 2 x 120 mm L X W X H 1180 x 820 x 2430 mm Weight approx. 5610 kg Availability: short term Storage location: Hochheim

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 Dolipju R Szys T Dtsut - new exhibition machine -

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: Currently still in production Equipment and technical specifications: Gluing max. 8-55 mm Including rotating control panel Dual-motor HF joining unit Including replaceable, Teflon-coated rapid heating tank Including electronically controlled positioning of the pressure rollers Including pivoting double cross-cut saw unit Including flush trimming unit Including application-controlled bevel, radius, and corner rounding unit with nesting package Including radius scraper with nesting package Including flat scraper Dujlip Tev Ufzwe Dtot Including grooving unit Including buffing unit Including spray unit Location: Hesse Availability: Upon request !Sold on behalf of customers!

Condition: used, Frame clamping element (WS15) HOLZ-HE-used- ATTENTION: SET price for 4 pieces!, Clamping cover type O, Clamping on console via toggle switch, Djlipsvtrk Ae T Dteut Opening / closing via toggle switch ----- Technical data ----- Clamping range: 40 - 115 mm

Condition: new, Jointer and thickness planer HOLZKRAFT fs 30c TERSA Duelip Tou R Sz Te Dtot - Exhibition machine - Table opening to the rear, TERSA planer shaft, helical toothed infeed roller ----- Technical data ----- Planing width: 300 mm, Thicknessing table dimensions: 565 x 300 mm, table length: 1,510 mm, max. chip removal: 4 mm, planer shaft Ø: 72 mm, Number of knives: 3 pieces, clearance height: 230 mm, min. Workpiece thickness: 3 mm, feed speed: 7 m/min, Speed: 5,200 rpm, Extraction nozzle Ø: 2 x 120 mm, Motor power 400 V: 5.5 HP / 4 kW, weight: 270 kg - new exhibition machine -

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Dolipju R S Dhj T Dtout Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg - new exhibition machine -