Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Price: €29 900/press €49 900/ 2 presses Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin Dslqsp T Twue Shqhout assembly aids Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Condition: new, Year of construction: 2025, Paint/spray booth dimensions without fan and control Panel! Suction area - dimensions (mm): 2190w)x2350(h) Overall dimension (mm): 2295(w)x2295(h)x1910(d) Technical data: Dslqsia Taqj Shqhjut - Fan power 2.2 kW (ATEX) - Fan suction power: 12000 m³/h (max. 1100Pa) - Lighting: 1pc 2x58W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: reconditioned (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 2962 Ident:171526, Multi-Sided Wide Planer with Beveling Unit LEDINEK SUPERLES 400 4V+4F MACHINE DATA Machine type: Multi-Sided Wide Planer with Beveling Unit, Right-Hand Version Version: Manufacturer: LEDINEK Year of manufacture: 1997 Model: SUPERLES 400 4V+4F Machine No.: 2962 Condition: Used, Ready for use DESCRIPTION SUPERLES 400 4V+4F Multi-Sided Wide Planer with Beveling Unit Heavy-duty, universally applicable planer with an innovative quick-change tool system. The machine is suitable for demanding machining of KVH, glulam lamellas, heavy beams, and glued laminated timber. The machine has 4 work spindles and 4 beveling units, arranged as follows: 1. Horizontal at the bottom 2. Horizontal at the top 3./4. Vertical left/right (opposite) 5./6. Chamfer top left/right (opposite) 7th/8th chamfer bottom left/right (opposite) Tools: Horizontal shaft speed: 3,000 rpm Vertical spindle speed: 4,000 rpm Chamfer spindle speed: 9,000 rpm Tool diameters: Horizontal shafts: 205 mm Vertical heads: 160 – 300 mm Chamfer cutter: Ø 180 / 45° x 10 mm Tools: Two vertical shafts and two planer and thickness shafts are still available. Extraction nozzle diameter: Dressing shaft: 200 mm Thickness shaft: 250 mm Vertical shafts: 2 × 200 mm Dslqowhvzye Shqhjut Bevel cutters: 4 × 80 mm Extraction speed: min. 30 m/sec General: Air pressure: 6 bar Weight: 14,000 kg Installed power: 140 kW with control panel and control cabinet

Condition: good (used), Year of construction: 2006, operating hours: 14,000 h, Functionality: fully functional, machine/vehicle number: AL1/004511, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 25,000 m/min, feed length X-axis: 2,800 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 110 mm, nominal power (apparent): 11 kVA, controller manufacturer: ESA, controller model: KVARA 6, workpiece length (max.): 2,900 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 110 mm, total height: 2,700 mm, total length: 5,500 mm, total width: 2,500 mm, table width: 1,250 mm, table height: 900 mm, table length: 2,750 mm, Working dimension X 2,900 mm Working dimension Y 1,240 mm Working dimension Z 180 mm Number of milling spindles 1 Main motor power 6.6 kW Rotation speed max 18,000 rpm Torque support Tool clamping system HSK-F63 Tool changer positions 8 Vertical drilling spindles 12 Horizontal drilling spindles and X 4 Horizontal drilling spindles and Y 2 Groove saw Dueljwh I Nveq Shqhot and X-direction Lock recess milling aggregate double-sided Angular head 0-360+0-90 deg. Vector axis Cantilever machine Machine table Pod and rail table Number of consoles 6 Vacuum pump Number of vacuum pumps 1 Capacity vacuum pump 100 m³/h Safety devices Bumper Interface for .dxf data Control PC control Software SCM XILOG Conformity marking CE mark

Condition: excellent (used), Loroch Hydromat gang saw sharpener Hydraulics Full automatic Automatic lowering of the grinding wheel after a full cycle Last cycle so called squeezing Duolq Shjnucmpeqhot Sharpening unit tilting at an angle of 0-30 Double-sided slat with 25 and 20mm graduation

Condition: used, Year of construction: 2022, Functionality: unexamined, machine/vehicle number: 0500800070, overall weight: 742 kg, fuel type: electric, The machine presented for inspection was purchased new in 2022. It is in good technical condition on the outside, there are visible scratches from use on the external casings, traces of use, local corrosion centers on the conveyor belt casings. During the inspection, it was not possible to connect to a power source and check the machine in operation. Electric motor 400V Motor power: 9500 W 18.4 A Dslq Shqjwhw Izehout Splitting force: 20 tons Max. cutting length: 500–550 mm Max. wood diameter: 500 mm (minimum 100 mm) Splitting wedge speed: 5 cm/s Splitting wedge return speed: 4 cm/s Saw guide length: 55 cm Chain saw / splitter drive: Hydraulic Chain: C3621 000 0077 / 0.375 / 1.5 mm Conveyor belt length: 3.2 m Max. loading height: 2.0 m Conveyor speed: 0.8 m/s Conveyor belt drive: Hydraulic Weight: 742 kg (632 kg + 110 kg conveyor) Dimensions (W / L / H): 2200 / 1050 / 1250 mm Dimensions - belt feeder (W / L / H): 1850 / 450 / 570 mm

Year of construction: 2008, Condition: good (used), Scolari sawdust dryer for sale with automatic control - currently in operation. The dryer uses fresh air mixed with flue gas, the maximum drying temperature is 130-140 °C. Its heat requirement is 2,000,000 Kcal/h, capacity is 2 tons/h (dry sawdust). It is heated by an automatically controlled wood chip boiler. Extras: • Automatic moisture meters on the inlet and outlet sides Delqsv Eu R Ae Shqhjut • Frequency converter-controlled draft in the drying chamber The equipment can be viewed in operation after prior arrangement. A detailed description is available on request.

Condition: new, Year of construction: 2025, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1400(h) Overall dimension(mm): 3100(w)x1850(h)x810(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Dusloia Ta Heq Shqhst Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2025, Functionality: fully functional, working width: 250 mm, planing height: 120 mm, spindle diameter: 35 mm, planing width: 240 mm, working height: 120 mm, total width: 1,600 mm, total height: 140 mm, total length: 5,300 mm, overall weight: 3,500 kg, spindle speed (max.): 8,500 rpm, spindle speed (min.): 6,000 rpm, rotational speed (max.): 8,500 rpm, rotational speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, motor voltage: 380 V, workpiece height (max.): 130 mm, compressed air connection: 6 bar, jointer table length: 2,300 mm, type of input current: three-phase, workpiece width (max.): 250 mm, tool diameter: 125 mm, table length: 2,500 mm, warranty duration: 12 months, number of spindles: 6, power: 7.5 kW (10.20 HP), chip removal: 10 mm, frequency: 50 Hz, chip removal for surfacing (max.): 10 mm, feed roller diameter: 140 mm, worktable width: 250 mm, blade shaft diameter: 125 mm, Equipment: cabin, motor brake, Superset NT with 6 spindles and profile package and 14 axis control with 999 programs available. Position 1. Dressing spindle Position 2. Right vertical spindle 2nd axis (up - down / on - off) Dolq Sen Nwkrshqhsut Position 3. Left vertical spindle 3rd axis (width adjustment + up - down + setup) Position 4. First horizontal spindle 2nd axis (height adjustment + setup) Position 5 second horizontal spindle 3rd axis (height adjustment + on-off + setup Position 5 top to horizontal spindle: automatic glass bead separation Position 6 plaster spindle bottom with 2nd axis (on-off + up - down) All spindles with 8500 rpm (pos. 2-3-4-5-6) and pos. 1 with 6000 rpm. Control with color screen with 19" touch screen (14 axis control)

Condition: good (used), Rotor approx. 250 mm Hydraulic slider Feed opening approx. 600 x 800 mm Rotor length approx. 600 mm Motor 18.5 kW External dimensions approx. 1750 x 1250 x 1600 mm Dolqowc R Rle Shqhout Technical specifications upon request

Condition: used, machine/vehicle number: 007722, Position 1: Single Edgebanders IMA-NOVIMAT CONCEPT I/G80/440/R3 Duolq Shjv Ir Spoqhot Position 2: Panel Return Systems IMA-NOVIMAT CONCEPT I/G80/440/R3

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 11218-20, The press is fully functional, in constant use. The press is fully functional and in constant use. Dolq Sewh R D Ashqhsut The press is fully functional, in constant use.

Condition: like new (used), Year of construction: 2010, Functionality: fully functional, Fiedler boiler for dryer - heat transfer medium flue gas We offer for sale our "Fiedler SZDO-BS" boiler. Power: 1000 kW Maximum temperature: 400 °C Maximum flow rate: 2 m³/sec Dslstwclvjq Shqhsut Noise level: 78 dB Total weight: 7500 kg Power consumption: 2,7 kW Electrical requirements: 3x400V/230, 50Hz Production number: 356 Year of manufacture: 2010 The boiler is in excellent condition as shown in the pictures. The boiler body is insulated with samott bricks. The boiler has been sold due to the closure of the manufacturing plant. Not in use but cold tests have been carried out. No possibility to test it in operation. The boiler is in automatic operation. The fuel is fed into the firebox by a pulley. The firebox is of the shrouded type, with inclined grate (but not moving), using primary and secondary air. The flue gas is mixed with fresh air in the 'afterburner' section of the boiler. The fresh air enters on the left side of the boiler. Its flow rate - and thus the drying air temperature - is controlled by an electrically operated butterfly valve.

Condition: new, Year of construction: 2025, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x810(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation Djlq Shqsia Ta Rehout - Warranty We can manufacture filtration supply (new air to sprayroom). Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2006, 1. tool holder - lower Nobq Up Nusuzaa Sj Docp Brake motor: 5.5 kW Spindle diameter: 40 mm Speed: 6000 rpm Tool circumference: 93 - 160 mm Axial adjustment range: 5 mm Folding device MarathonCoatin for table insert in front of 1. lower tool holder 2. tool holder - PowerLock - right Brake motor: 11.0 kW Common motor with left tool holder Speed with high-performance ball bearing Tool circle 40 mm below table level: 93 - 200 mm Tool circle 55 mm below table level: 93 - 180 mm Tool circle for simple milling heads max. 163 mm Max. tool diameter behind the limiting plane: 180 mm Max. forming depth: 35 mm Axial adjustment path: 55 mm CNC-controlled axial and radial spindle 3. tool holder - PowerLock - left Brake motor: common motor with 2nd spindle Speed with high-performance ball bearing Tool circle 40 mm below table level: 93 - 200 mm Tool circle 55 mm below table level: 93 - 180 mm Tool circle for straight milling heads max. 163 mm Max. forming depth: 35 mm Axial adjustment path: 55 mm CNC-controlled axial and radial spindle 4th tool holder - PowerLock - upper Brake motor: 7.5 kW Speed with high-performance ball bearing Duolq Shqowavgtshjt Tool circumference: 93 - 200 mm Max. tool circle for straight cutting heads: 180 mm Max. forming depth: 35 mm Axial adjustment range: 40 mm Split pressure foot in front of the upper tool holder, adjustable to the tool circle and tilted away from the tool, spring-loaded. CNC radial controlled spindle 5th tool holder - PowerLock - upper Brake motor: 7.5 kW Speed with high-performance ball bearing Tool circumference: 93 - 200 mm Max. tool circle for straight cutting heads: 180 mm Max. forming depth: 35 mm Axial adjustment range: 40 mm Split pressure foot in front of the upper tool holder, adjustable to the tool circle and tilted away from the tool, spring-loaded. CNC controlled spindle axially and radially 6. Tool holder - PowerLock - lower Motor with brake: 7.5 kW Rotation speed with high-performance ball bearing Tool circumference: 93 - 200 mm Max. forming depth: 15 mm Axial adjustment range: 35 mm CNC controlled radial spindle Feed system Feed controlled frequency, stepless with brake: 4 kW, 5 - 30 m min The machine is connected, it only worked in pine wood.

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, Hopper opening (basic dimensions) 1230 x 1235 mm Main motor 45 kW Duslq Shswc Sbfjqhjt Screen perforation 25/30 mm (or upon request) Hopper volume (basic hopper approx. 2 m³) Rotor diameter 360 mm Turbo coupling Number of cutting blades: 60 Suction nozzle 200 mm Weight approx. 3200 kg Fast slide return PLC control

Condition: good (used), Sliding table, sliding carriage on a Martin T21 spindle moulder for sale. Worked perfectly until dismantled. Only removed due to lack of space. Ideal for making mortise and tenon joints and lap joints. Weight according to data sheet: approx. 170 kg Duolq Sowgh Trohqhst

Condition: like new (used), Year of construction: 2012, Dear customers, we are currently offering you a used band saw from the HEMA brand. Here are the technical data of the machine: Table: 900 x 900mm Cutting width: 780 mm Super cutting height: 390 mm Roll diameter: 800 mm Saw blade length: 5,600 mm Power: 4 kW Speed: 1,650 rpm Dimensions: 1,500 x 950 x 2,700 mm Weight: approx. 720 kg Special features: - Comes from a paper factory and only sawed cardboard there! Duslq Shqjwc Tuaehot Price plus VAT, which is shown separately on the invoice. Shipping possible for an additional charge! If you have any questions, please feel free to contact us.

Condition: used, Functionality: fully functional, Sawmill for sale: The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Due to their design, they are suitable for processing both soft and hard hardwoods. The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: - 2-1 Log store with splitter - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control Duelq Shqjv Hm T Sohot - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine

Condition: new, Working width (finished size) 23 – 180 mm Working height (finished size) 6 -105 mm Min. length of single workpiece 300 mm Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Motor power vertical spindles 1 x 7.5 kW Spindle speed 6000 rpm Djlq Sjiiv Dcehqhjut Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle 10 mm Los roller integrated in the outfeed table Suction DM 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick changeover - Front vertical printing unit in front of the left vertical spindle - Feed table length 2300 mm - Tool package consisting of 4 planing heads and a joint rebate cutter

Condition: refurbished (used), Year of construction: 2022, Functionality: fully functional, Rotor 260 mm Feed opening approx. 630 x 810 mm Hydraulic slide Rotor length approx. 630 mm Duelq Shqewc R S Ajhot Motor 18.5 kW Blades 30 mm Screen 25 / 30 mm (can be replaced) Completely overhauled Robust design Technical specifications upon request

Year of construction: 2024, Condition: new, For sale: drying system - 1T 184 TPR Model, (Mobile Conveyor Belt) We offer a high quality drying system, ideal for drying wood sawdust, produce, recyclable waste, food ingredients. Below we present the design details and features of the drying system: Design data: - Product handled: sawdust - Physical appearance:Loose - ˃ 1 mm - Initial moisture content: 55%, 50%, 40% - Final moisture content: 12% - Wet production: 4,00 t/h, 4,50 t/h, 5,65 t/h - Dry production: 2,05 t/h, 2,55 t/h, 3,85 t/h - Drying air temperature: 80 °C - Thermal energy consumed: 1.800 - 2.350 kWh - Max. evaporated water per hour: 1.800 - 1.955 Kg/h Installed electrical power: - Feeding cooker: 5,5 kW (x2) - Drying belt: 2,2 kW Deljua D U Isq Shqheut - Unloading equipment: 5,5 kW - Exhaust fans: 22,00 kW (x3) - Cleaning fans: 4 kW (x2) - Total installed power: Approx. 92.70 kW Water-to-air heat exchanger: - Recommended thermal capacity: 2.600 kW - Water temperature: 90 °C on - 70 °C off Dimensions: - External dimensions of dryer frame: Approx. 22 m long, 6 m wide - Drying belt surface: 72 m² - Unloading equipment: 5,500 mm x Ø 300 mm - Feeding trough: Approx. 1.00 m³ - Number of exhaust fans: 3 - Number of water-to-air heat exchangers: 4 Technical description: - Feeding system: Adjustable pulley conveyor with level sensor. - Drying table: Modular design with inspection windows. - Drying belt: Polyester fabric conveyor belt with steel rollers. - Thermal insulation: 50 mm thick rock wool with Magnelis® cladding. - Mixing brush: Painted steel mixing brush. - Base frame: Folded steel plates with reinforcing profiles. - Drying belt cleaning system: High pressure air and water spraying system. - Water spraying system: Closed circuit water spraying system. - Stairs and access: Secure access stairs and walkways. - Unloading equipment:Steel pulley unloader with motor. - Heat exchangers: High efficiency steel finned heat exchangers. - Air exhaust fan: Centrifugal fans with vibration damping connections. - Heat recovery: Hot air return duct. - Machine enclosure: Prefabricated enclosure made of insulated sandwich panels. - Dust filters: dust filters on the air intake grille. - Paint cycle: Phosphating, passivation, polyester powder coating. - Electrical control panel with PLC: SCHNEIDER electrical and PLC components, HMI control panel. - Humidity control system: PT 100 temperature sensors. - Remote service: direct connection via Internet. - Input and output humidity sensors: 4-20 mA adjustment. For further information and quotation please contact us! We look forward to your interest! Price: 530.000 Eur

Condition: new, Multi-combination machine with aluminum sliding table for sawing, milling, planing/thicknessing and optional slot drilling torsion-resistant cast steel construction machine table made of cast iron, hardened and ground light-weight anodized aluminum sliding table, 10 years SCM warranty on wear of the guideways large trimming frame with telescopic aluminum fence and folding fences with combi saw fence with 45° quick adjustment max. saw blade Ø 315 mm with optional scoring device, swivels from 90°-45° helical toothed steel infeed roller for uniform wood infeed when planing thicknesses four milling speeds, manually adjustable standard with right-left rotation of the milling spindle three independent motors for each working unit working length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. clearance width left of saw blade 1660 mm cutting width at rip fence 800 mm saw shaft speed 3500 rpm. saw blade inclination 90° - 45° working width 300 mm planing table length 1260 mm planing shaft Ø / number of planing knives 72 mm / 3 pcs. table dimension 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm feed speed 7 m/min Duslq Shqsiiyppshjt milling spindle diameter 30 mm useful length of milling spindle 100 mm max. tool diameter 180 mm retractable spindle speed 3500/600/800 rpm motor power 3 x 4 kW, 400 V, 50 Hz weight 430 kg suction nozzle diameter 4 x 120 mm Suction nozzle Ø saw blade guard 60 mm sliding carriage with ball contact system equipped with millionfold proven ball contact system permanently smooth running due to hardened and ground guideways not sensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail The suction nozzles of the dresser and thicknesser point in the same direction. The suction hose can therefore be fed to the machine from the same side for both types of planer. Steel infeed rollers with helical teeth for a constant and even and uniform wood infeed solid backstops prevent the backstroke of workpieces 3-knife shaft ensures an optimal planing pattern

Condition: new, Screw compressor AGRE Model Sonetteo 7,5+ 10 Screw compressor compact unit incl. refrigerant dryer and DL tank 270 lt. Belt driven. Space saving. Inexpensive. Easy operation thanks to Infologic² Basic control. Duelq Sshun Tzohqhot Efficient compressor stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Mounted refrigeration dryer. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Infologic² Basic control unit Refrigerant dryer: Mounted, refrigerant R513A Tank: 270 lt. horizontal painted 11 bar Motor power: 5,5 kW Pressure: 10 bar Delivery rate: 780 lt./min incl. time controlled condensate drain Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg Duslq Shqohby Rijhot