Used Barrels for sale (222)

Condition: used, oil hand pump, oil pump, fuel hand pump, hand lever pump, hand pump, oil drum pump, oil drum pump -Manufacturer: ABG pumps, hand pump for oil and fuel -Barrel screw connection: M 64 x 4. -Dimensions: 270/60/H290mm Dksdpfst Rbh Usx Al Usn -Weight: 1.1 kg

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Outer diameter: 210 mm -Width: 53 mm -Inner diameter: 140 mm -Weight 6.3 kg Dedeb A Ipzjpfx Al Ujkn

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings Dksdpfxjb A Ip Aj Al Usn -Outer diameter: 310 mm -Width: 82 mm -Inner diameter: 200 mm -Weight 22.8 kg

Condition: good (used), moving point, moving center point, moving Morse taper, moving -barrel tip: shaft-mounted -Recording: MK5 -Dimensions: Ø 70/240 mm -Weight: 3 kg Djdped R Smnefx Al Uskn

Condition: used, moving point, moving center point, moving Morse taper, moving Dkoded R Smuspfx Al Usn -barrel tip: shaft-mounted -Recording: MK5 -Dimensions: Ø 85/220 mm -Weight: 2.8 kg

Condition: used, moving point, moving center point, moving Morse taper, moving -Center point: 40 mm -barrel tip: shaft-mounted -Recording: MK5 Dkedpfx Alsc S D H Aj Uen -Number: 2x tips available -Price: per piece -Weight: 4.7 kg

Condition: used, moving point, moving center point, moving Morse taper, moving -Center point: 50-85 mm -barrel tip: shaft-mounted -Recording: MK5 -Weight: 5.4 kg Dedsc S D H Hepfx Al Uokn

Condition: used, moving point, moving center point, moving Morse taper, moving Dodpod R Smxsfx Al Uskn -barrel tip: shaft-mounted -Recording: MK5 -Dimensions: Ø 85/242 mm -Weight: 3.9 kg

Condition: used, moving point, moving center point, moving Morse taper, moving -Center point: 75/250 mm -barrel tip: shaft-mounted Dksdpfx Asc Nir Iol Uon -Recording: MK7 -Weight: 34 kg

Condition: used, turning diameter / mm turning length / mm swing diameter over bed slide / mm Technical data - Model 230 DIMENSIONS Centre height on the bed: 230 mm Spacing between centres:1600mm Bed width: 360 mm Largest turning Ø: on the bed: 465 mm on the carriage: 278 mm on fixed steady rest: 200 mm on travelling steady rest: 160 mm CROWNING Width of the crank: 300 mm Dodpfxewz Ryws Al Uokn Distance between face plate edge and offset: 150 mm Largest turning Ø on the offset: 690 mm SPINDLE Ø of front bearing (inside): 110 mm Ø of rear bearing (inside): 95 mm Ø of hole: 77 mm Mounting Type - Cam Lock: 6" Internal spindle taper - taper: 1 : 20 Spindle taper - C. M. - N.: 5 Speed ranges: Slow feed - rev. 1': 15÷1000 Normal feed - rev. 1': 22÷1500 Fast feed - rev. 1': 30÷2000 FEEDS (without gear change)-N.: 108 Longitudinal feed range at revs. : 0.04÷4 mm Transverse feed range at revolution: 0.02÷2 mm Lead screw - Ø: 40 mm Lead screw pitch: 12 mm THREAD (without gear change) Metric - N. 54 to: 0.5÷28 mm Module - N. 54 to Module: 0.25÷14 Whitworth - N. 54 to Wt. x 1": 56÷1 Diametral Pitch - N. 54 to D.P.: 112÷2 Inch - N. 54 to Inch: 1/32 ÷ 13 3/4" SPINDLE PIT Quill Ø: 75 mm Quill barrel: 220 mm Quill taper - vices N. 5 POWER Main motor - HP: 10 Pump motor - HP: 0.25 WEIGHT approx. - kg 2000-2220 2530-2720 2920 ON REQUEST Main motor - HP

Condition: used, Year of construction: 2016, functionality: fully functional, Timber sawing line with horizontal band saw and timber outfeed mechanisation, including control cabinets and hydraulic unit. The roller conveyors are each 11 metres long. The mobile band saw is set up stationary and axles, wheels, tow bar and mudguards are present. Comes with 12 associated saw blades. Available from mid-April/May Mobile saw Wimmer Zenz BN110, year of manufacture 2016, equipped as follows: Manufacturer: ZENZ Type: MOBILE SAW (MOBILSÄGE) Model: BN 110 Equipment: Clearance: 110 x 130 cm Cutting width: 95 cm Cast iron wheels, 850 mm diameter Band saw blade width: 100 mm Drive motor: 22 kW Length: 11 m with drawbar Width 2.55 m, height 2.70 m Weight: 3,500 kg Vertical support: 5.00 Log turner: 1.00 Level adjustment with claws: 4.00 Log roller: 2.00 Pre-cutter: 1.00 Official operational permit for overrun brake: 1.00 SPS control Band saw blade 6000x100x1.1 mm stellite Water cooling with 20 l barrel Dkedeypat Iopfx Al Uon 20 l barrel and nozzle mounted on the blade guide Chain turner: 2.00 Extension 3 m without support beam Chip collection box

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Condition: unused -Outer diameter: 260 mm -Inner diameter: 170 mm -Width: 42 mm Dkedpfxsb A Ia Rs Al Ujn -NO SALES BY WEIGHT

Year of construction: 2000, condition: used, General Technical Description: The Macchi 3-Layers is a three-layer blown film co-extrusion line designed for the production of high-quality tubing and sheeting films. The line is capable of processing LLDPE, LDPE, mLLDPE, MDPE, and HDPE. Film production utilizes an upward bubble-up working principle. The machine is equipped with a 350 mm 3-layer die head and delivers an output capacity of up to 450 kg/hour. EXTRUSION GROUP: Extruders: 65 mm + 80 mm + 65 mm • Infrared heating zones • Hydraulic screen changers The Coexflex Size 3 extrusion group includes: – Two high-performance extruders 65/30D (layers A and C) – One high-performance extruder 80/30D (layer B) – Bimetallic barrels – Nitrided, high-mixing screws – Water-cooled grooved feed sections – AC motors with digital frequency converters (74 kW for 65 mm, 100 kW for 80 mm) DIE HEAD: • Model TE502 • 350 mm diameter, die gap 1.8 mm • IBC (Internal Bubble Cooling) • Electroless nickel-plated flow channels • 4+4 ceramic heating zones • Mounted on a die cart with integrated air distribution manifold COOLING SYSTEM: • Dual-lip Plast-Control air ring • Coexflex version includes Double Flux Cooling Ring ASR3, with inverter-driven blower and interchangeable inserts TAKE-OFF UNIT: • Take-off width: 1800 mm • Oscillating nips • Side gusseting capability WINDING SECTION: • Double automatic back-to-back winder • Fully automatic roll change • Maximum winding width: 1750 mm • Cardboard core diameter: 76 mm FILM SPECIFICATIONS: Dkedpsyt Ikvefx Al Uon Film widths achievable with 350–400 mm die: 1300–1700 mm Thickness range: 18–200 μm Output example (Coexflex specs): 1600 mm width, 100 μm LDPE → 400 kg/h LINE SPECIFICATIONS: • Total line height: 10 m • Mechanical winder speed: 7–110 m/min • Installed electrical power: 320 kW, 415 V, 3-phase + neutral • Cooling water consumption: 6 L/min • Compressed air requirement: 6 bar AUXILIARY EQUIPMENT: • Tower • E+L web guiding system • Piovan gravimetric weight control • Piovan Quantum dosing units • Plast-Control automatic thickness control • Calibrating basket • Corona treater (Ferrarini & Benelli) • FBF cold-needle micro-perforation • Air shafts (8 pcs) This translation uses precise, industry-standard terminology suitable for machinery and equipment descriptions on professional trading platforms.

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Dksdpfx Aeub S R Hel Uen Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Dedsd N Erpjpfx Al Uskn Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: not inspected (used), DÜRR Type: DÜRR 1C gluing system Dürr 1C gluing machine with drum pump, dosing unit and heated hose (approx. 5m). Technical description of the machine: Condition of the system Barrel pump, delivery hoses, dosing unit etc. are contaminated with old glue and must be cleaned or replaced. and must be cleaned or replaced. The machine has approx. 20 operating hours. Machine was used in a research facility. Year of construction 2017 Air inlet pressure max 6 bar Dimensions: approx. 1.5x1x1.5 meters 1 DÜRR adhesive control unit (110017040) Dsdpfx Alerdyb Aj Uekn 1 single barrel pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2018, condition: used, construction height: 2,000 mm, bed width: 2,700 mm, Equipment: CE marking, We are offering this used "Marican" L250E3 two-vessel brewhouse with fermentation tanks, year of manufacture 2018. The brew kettle capacity is 250 liters per batch. The system consists of a mash tun with integrated false bottom and a wort kettle with integrated whirlpool. Additionally, a hot liquor tank for sparge water is included. For cooling, a plate heat exchanger is installed. There are also 3 open, non-refrigerated fermentation vessels, as well as all hoses and a pump for cold wort transfer. The brewery is equipped with a 32-amp three-phase power connector. A fixed water connection is not required. If interested, a "Sommer" Maltman 55 grist mill, a barrel washer, a manual counter-pressure filler, and a capper are also available. Stainless steel kegs in various sizes can be purchased as well. Djdpeyt Nlnjfx Al Uekn The system was in regular operation until 2025. Machine type: L250E3 Model number: 551 Year of manufacture: 2018 Wiring diagram number: MAB-118 If you have any questions, please feel free to contact us at any time.

Condition: excellent (used), Year of construction: 2008, KRAUSS MAFFEI Injection Moulding Machine KM 1100-12000 MX Basic Information Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Control panel: color monitor integrated with the control console Interfaces: 3 USB ports The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for processing thermoplastics, featuring abrasion protection. Clamping Unit Clamping force: 11,000 kN Mold opening force: 770 kN Platen dimensions (horizontal × vertical): 2,210 × 1,910 mm Tie bar spacing (horizontal × vertical): 1,550 × 1,250 mm Mold opening stroke: 2,000 mm Minimum mold height: 600 mm Maximum mold height: 1,200 mm Platen opening stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection Unit Screw diameter: 120 mm Maximum injection pressure: 1,758 bar Injection volume: 6,786 cm³ Dsdpfx Aloyugfzj Uekn Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s Electrical-Hydraulic Equipment Rated drive motor power: 132 kW Installed heating capacity: 82 kW Number of barrel heating zones: 7 Dry cycle rate (EUROMAP): 802 cycles/h Hydraulic oil tank capacity: 2,440 l Machine Dimensions & Weight Net weight (with control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection molding machines. The system controls the hydraulic pump motor via a frequency inverter, adjusting the motor speed to the current production cycle requirements. Key Benefits: - Reduction in electricity consumption by up to 30% - Hydraulic pump servo drive technology - World-class, proven technology used in the plastics processing industry - Reduced energy losses during idle operation - Less heating of the hydraulic system - Increased longevity of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection molding machines The ESS system allows for a significant reduction in machine operating costs while maintaining full production parameters.

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Dkjdpfeyugaljx Al Usn Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: like new (used), Year of construction: 2018, operating hours: 20 h, functionality: fully functional, 1 x Riggs Autopack Ltd depositor on mobile frame with pneumatic foot pedal. Has had very little use - LESS THAN 20 HOURS. Suitable for a variety of hot or cold products liquid or semi-liquid, including sauces, chutneys, jams, etc. Model - 1000 Series 3. Serial number - TT2365. Dksdpfx Aewpunbel Usn Filling range - 200ml to 2500ml piston & barrel set. Filling nozzle - 25mm diameter.

Condition: good (used), Year of construction: 2004, operating hours: 63,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, Type: Engel Victory 500/120 Phoenix Dodpfoymn Inex Al Ujkn Year: 2004 Screw ø: 35 & 40 mm (Extra screw & barrel from 2021) Shot volume ccm: 193 & 251 Operating hours: approx. 63,000 h Complete line: – Robot: Wemo 8-5 3S, Year 2003 – Conveyor belt, Crizaf – Color doser, Moretto – 2 pcs. temperature control units, Regloplas – Extra screw & barrel

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 6V0146, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   Dkedpfxjwmm S Te Al Uon MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex display Dyson apprentice training facility, in excellent condition

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for thermoplastics processing and is equipped with a complete plasticizing unit in a version with abrasion protection. Technical specifications Clamping unit - Clamping force: 13,000 kN - Mold opening force: 910 kN - Dimensions of mounting platens: 2210 × 1910 mm - Tie bar spacing: 1570 × 1270 mm - Ejector stroke: 350 mm - Ejector force: 250 / 125 kN Injection unit - Screw diameter: 105 mm - Injection pressure: 2296 bar - Injection volume: 5195 cm³ - Shot weight for PS: 4728 g - Injection rate: 856 cm³/s Plasticizing parameters - Screw speed: 103 / 145 rpm - Plasticizing throughput (PS): • standard speed: 122 g/s • increased speed (option): 171 g/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Installed heater power: 71 kW Dkjdpsyrrwksfx Al Uen - Number of barrel heating zones: 7 - Dry cycle time according to Euromap 6: 765 cycles/h - Oil tank capacity: 2440 l Dimensions and weight - Net weight with control cabinet: 70 tons - Installation dimensions: 13.03 × 3.65 × 2.82 m

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal wire and strip bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch wire stripper Holder and brush motor with mounted tool W32/1-32 Soundproof booth Barrel CU wire with punched parts Switch cabinet Item condition: very good Description of the manufacturer, deviations possible.  You buy the machine as it can be seen on the pictures.  Complete factory closure, Dodpfxeh I Nrqs Al Uokn large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal wire and strip bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch wire stripper Holder and brush motor with mounted tool W32/1-32 Soundproof booth Barrels of CU wire with punched parts Switch cabinet Item condition: very good Description of the manufacturer, deviations possible.  You buy the machine as it can be seen on the pictures.  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Dodpog T S T Eefx Al Uskn Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!