Used Eht Ass 8-30 for sale (55)

Condition: good (used), Year of construction: 1995, Technical specifications: Maximum cutting width: 6500 mm Maximum cutting capacity (steel St40): 6 mm Maximum cutting capacity (stainless steel): 4 mm Adjustable cutting gap Adjustable cutting angle Adjustable parallel stop Oil capacity: 220 l Motor power: 18 kW Dimensions (L x W x H): approx. 8300 x 2200 x 2450 mm Overfloor machine (i.e. no additional foundation required) Weight: approx. 21 tons Csdpfx Afsyhpx Ronopu The seller is not liable for typing or data transmission errors. The machine's visual condition, technical state, and wear correspond to its age; used machines are sold without any warranty.

Year of construction: 2003, operating hours: 3,542 h, condition: ready for operation (used), This EHT ECOCUT was manufactured in 2003. A robust hydraulic shearing machine, it features a cutting length of 3,050 mm and a thickness capacity of 13 mm. It operates with an 18.5 kW main motor and includes an ELGO P8511 control for precision. Consider the opportunity to buy this EHT ECOCUT hydraulic shearing machine. Contact us for more information. • Cutting capacity: • Cutting length: 3,050 mm • Cutting thickness: 13 mm • Material tensile strength: 450 N/mm² • Hydraulic system: • Oil volume: 300 liters • Electrical data: • Current type: AC Codpfx Afjycfq Sonjpu • Frequency: 50 Hz • Operating voltage: 400 V • Control voltage: 24 V DC • Rated current: 45 A • Main fuse rated current: 63 A • Main motor power: 18.5 kW • Control / documentation: • Control type: ELGO P8511 (NC backgauge control) • Electrical circuit diagram no.: 111 796

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Csdouddh Ajpfx Afnopu Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Condition: good (used), Year of construction: 1987, fabric-no. 202 395 working length 2550 mm output 2000 KN tracking travel 13 mm Cjdpfxeq Awh Rs Afnepu safety distance 176 mm

Condition: ready for operation (used), Press force: 250 t Cedjx Tr Ugepfx Afnjpu greatest working length: 4050 mm equipped with CYBELEC DNC 70 PSG control

Condition: good (used), Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm Cpjdpfx Ajgxnkkefnju -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool Cpodpfx Aogxnkvofnou -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm -Weight: 147 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from press brake EHT type EHP 11-40 Cpsdpfx Aegxnkcofneu -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2 cylinders available, 1 left / 1 right -Price: per piece -Dimensions: 855/285/380 mm -Weight: 311 kg/unit

Condition: used, Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition (!!) - in checked conditions - machinevideo - Cedexaa A Njpfx Afnspu ?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * Swiveling control panel, front right * 2D graphic display for display and multiple simulation * 2D graphic programming * Easy handling - CNC electro-motorized backgauge * Travel range 10.0 - 1,600 mm * Pneumatic / lowerable stop fingers * Adjustment speed max. 250 mm/sec. * Rear sheet support table with brushes - Electro-motorized lower beam adjustment (S axis) - Electro-hydraulic pivoting movement of the lower beam - Pneumatic upper tool clamping - Pneumatic lower tool clamping - 1x freely movable double foot switch - Original operating instructions + wiring diagram/hydraulic diagram Special accessories included: - 1x split set of goat's foot upper tools, H = 150 mm (not complete) - 1x split set of goat's foot upper tools, H = 200 mm (not complete) - 1x split bending/lower tool - Rear sheet support with brushes

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard Csdpsxab Tvefx Afnspu - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: good (used), Year of construction: 2000, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm good / well-maintained condition with special accessories (!!) Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side stop, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front Cedpfx Afex Emqysnspu - 1x freely movable foot switch - 2x front EMERGENCY OFF button - Operating instructions (PDF)

Condition: good (used), functionality: fully functional, Year of construction: 2005, controller manufacturer: ELGO, controller model: P8721, - Very well-maintained hydraulic guillotine shear EHT - Max. cutting length: 6050 mm - Max. sheet thickness at 450N/mm²: 6 mm - Pneumatic sheet support lift - Backgauge with positioning control - Ready for demonstration under power - Weight approx. 24 t Cjdjx Sau Eepfx Afnopu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, controller model: Cybelec DNC 70, bending force (max.): 110 t, stroke length: 200 mm, distance between stands: 3,050 mm, working length: 3,550 mm, TECHNICAL DETAILS Cpsdpfexxqtcox Afnju Press force: 110 t Bending length: 3,550 mm Distance between uprights: 3,050 mm Frame throat depth: 400 mm Ram stroke: 200 mm MACHINE DETAILS Control system: Cybelec DNC 70 Drive power: 15 kW Weight: 9,500 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, controller model: CYBELEC DNC 1200 PS Eco, bending force (max.): 225 t, stroke length: 550 mm, distance between stands: 1,550 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 225 t Bending length: 2,050 mm Upright distance: 1,550 mm Stroke: 550 mm Table height: 700 mm Throat depth: 405 mm Distance table/ram: 320-870 mm Frame throat: 405 mm MACHINE DETAILS Control: CYBELEC DNC 1200 PS Eco Machine weight: approx. 14,000 kg EQUIPMENT Cpsdpoxxqm Nofx Afneu Controlled axes: Y1 - Y2 - X - R Z1 and Z2 manually adjustable Lasersafe angle measurement Pneumatically adjustable support table Pneumatic upper and lower tool clamping 2-hand-foot control Manual crowning

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Year of manufacture: 1987 Cpodpjx Da D Uefx Afnju Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. — If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Location for viewing and collection: 12277 Berlin Domestic price net plus VAT or Net export price Collection only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Condition: used, functionality: unexamined, Year of construction: 2016, machine/vehicle number: 24398, control type: CNC control, controller manufacturer: Cybelec, controller model: Modeva Pac 15, Used Cybelec Modeva Pac 15 controller for press brake, max 7 axes. Cpedpfex Dh U Iex Afnsu

Condition: excellent (used), Year of construction: 1998, pressing force: 125 t, Hydraulic press brake Fab. EHT Typ. VARIOPRESS 125-3550 Year 1998 Technical data Make: EHT Type: Variopress 125-3550 Year of construction: 1998 Capacity: 125 t Effective length: 3550 mm Machine column: 2550 mm Projection: 300 mm Stroke: 240 mm Installation height: 640 mm Oil volume 250 L Dimensions: approx. L 3.90 x W 1.80 x H 3.00 m Weight: approx. 12 t Equipment - Control system: Cybelec DNC 80 2D graphics Cpodpfx Aer Epr Usfnou - Automatic upper tool clamping - Lower tool clamping 90mm and 13mm - controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 - motorized crowning - 6 x V block die length 3,500, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° - Punch straight, H 350mm / approx. 70°, length 3060 mm, segmented All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping Cpsdpfx Asd Ih S Uofnsu upper tool quick change system crown 3 sets of tools included

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm Cpsdpfxjww Ncco Afneu passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t working width: 4500 mm clear support width: 3050 mm support throat: 300 mm rear stop: 1000 mm electrical connection: 380 V, 18,5 kW weight: 14,8 t space needed: 4200 x 2000 x 3000/3150 mm Cpsdpfx Afjb N Evmenou

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm Cpjdpo Dqaqefx Afnju clear support width: 3050 mm support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 4,125 h, working width: 3,050 mm, sheet thickness (max.): 13 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Sheet width: 3,050 mm Sheet thickness: 13 mm Back gauge – electric: 10–1,000 mm Strokes: 16 strokes/min Control: Elgo MACHINE DETAILS Total power requirement: 22 kW Operating hours: approx. 4,124 h Cjdoww E Nxepfx Afnspu EQUIPMENT - Automatic cutting gap adjustment - Sheet lifting device - Foot switch - Digital back gauge 1,000 Elgo - Scrap chute - Rear safety guards - Angle stop - Material support arms

Condition: good (used), functionality: fully functional, Year of construction: 2003, Pressure: 225 t Bending length: 2050 mm Distance between uprights: 1550 mm Cedpewvi Uvjfx Afnjpu Control: CYBELEC DNC 1200 PS Eco Stroke: 550 mm Table height: 700 mm Throat depth: 405 mm Distance table/ram: 320-870 mm Frame throat depth: 405 mm Machine weight approx.: 14,000 kg Accessories/Equipment: - Controlled axes: Y1 - Y2 - X - R - Z1 and Z2 manually adjustable - Lasersafe angle measurement - Pneumatically adjustable support table - Pneumatic upper and lower tool clamping - Two-hand foot pedal operation - Manual crowning

Condition: not inspected (used), Year of construction: 1992, CNC folding machine make: EHT, type: EHPS 11 - 45, SN: 206882, year: 1992, pressure capacity: 1,100 kN, working range: 4,450 mm, CNC control Cybelec, 2-hand operation, safety device make: Trumpf, retrofitted in 2023, last maintenance in 2023 by Trumpf for approx. €10,000.00, Cpsdpfx Asv Duu Eofneu Note: Machine already professionally dismantled and ready for transport

Condition: good (used), Year of construction: 1999, cutting width: 6.050 mm Cedpfx Ajwzvntefnepu cutting thickness: max. 4 mm length stop range: 10 - 1.000 mm