Used Eht Ehps 11-25 for sale (54)

Year of construction: 1987, condition: ready for operation (used), An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible. Fsdpowrhwuofx Afnefu

Year of construction: 2005, condition: ready for operation (used), Working length: 3050mm, max. material thickness: 16mm, cutting angle range: 0.5°-2.5°, cutting gap adjustment range: 0.05mm-1.2mm, stroke rate: 16/min, back gauge travel: 1000mm, oil quantity: 300l. Machine dimensions X/Y/Z: approx. 4200mm/4250mm/2050mm, weight: approx. 14000kg. Documentation available. On-site inspection is possible. Fodpfox U Dw Nox Afnjfu

Year of construction: 2003, operating hours: 3,542 h, condition: ready for operation (used), This EHT ECOCUT was manufactured in 2003. A robust hydraulic shearing machine, it features a cutting length of 3,050 mm and a thickness capacity of 13 mm. It operates with an 18.5 kW main motor and includes an ELGO P8511 control for precision. Consider the opportunity to buy this EHT ECOCUT hydraulic shearing machine. Contact us for more information. • Cutting capacity: • Cutting length: 3,050 mm • Cutting thickness: 13 mm • Material tensile strength: 450 N/mm² • Hydraulic system: • Oil volume: 300 liters • Electrical data: • Current type: AC • Frequency: 50 Hz • Operating voltage: 400 V • Control voltage: 24 V DC Ffodsycfq Sspfx Afnou • Rated current: 45 A • Main fuse rated current: 63 A • Main motor power: 18.5 kW • Control / documentation: • Control type: ELGO P8511 (NC backgauge control) • Electrical circuit diagram no.: 111 796

Condition: good (used), Year of construction: 1995, Technical specifications: Fsdeyhpx Rspfx Afnofu Maximum cutting width: 6500 mm Maximum cutting capacity (steel St40): 6 mm Maximum cutting capacity (stainless steel): 4 mm Adjustable cutting gap Adjustable cutting angle Adjustable parallel stop Oil capacity: 220 l Motor power: 18 kW Dimensions (L x W x H): approx. 8300 x 2200 x 2450 mm Overfloor machine (i.e. no additional foundation required) Weight: approx. 21 tons The seller is not liable for typing or data transmission errors. The machine's visual condition, technical state, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2000, Punching Press Manufacturer: EHT Model: Strippit 1500/30 Year of manufacture: 2000 CNC Control: Fanuc Ffodpfx Asul S Eaefnsu Working area without repositioning: 2500 x 1500 mm Max. material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 index stations size D 3 programmable clamps Metal table Used exclusively in single-shift operation Including WILSON TOOL tooling 9226ä

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool Fodpfx Ajgxnkvsfnsfu -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm -Weight: 147 kg

Condition: used, Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * Swiveling control panel, front right * 2D graphic display for display and multiple simulation * 2D graphic programming * Easy handling - CNC electro-motorized backgauge * Travel range 10.0 - 1,600 mm Ffjdpfx Ajxaa A Nefnou * Pneumatic / lowerable stop fingers * Adjustment speed max. 250 mm/sec. * Rear sheet support table with brushes - Electro-motorized lower beam adjustment (S axis) - Electro-hydraulic pivoting movement of the lower beam - Pneumatic upper tool clamping - Pneumatic lower tool clamping - 1x freely movable double foot switch - Original operating instructions + wiring diagram/hydraulic diagram Special accessories included: - 1x split set of goat's foot upper tools, H = 150 mm (not complete) - 1x split set of goat's foot upper tools, H = 200 mm (not complete) - 1x split bending/lower tool - Rear sheet support with brushes

Condition: ready for operation (used), Year of construction: 2000, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1650 mm column arm 400 mm stroke 240 mm dayligth 320 - 560 mm ajustment speed 150 mm/sec working feed 15.0 mm/sec return speed 150 mm/sec back stop - adjustable 5.0 - 1000 mm table width 110 mm work height max. 1050 mm operating pressure max. 297 bar compressed air 4.5 - 6.0 bar oil volume 200 l operating pressure 340 bar total power requirement 7.5 kW weight of the machine ca. 5900 kg range L-W-H 4100 x 2100 x 2750 mm with increased installation height / piston stroke well-maintained condition (!!) - in checked condition - machine video - ?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - including CYBELEC CNC control * swiveling control panel at the front right * external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) * Travel range .. 5.0 - 1,000 mm * Travel speed .. 250 mm/sec. - CNC electro-motorized height adjustment of the back stop (R axis) * Travel range .. 70 - 235 mm * Travel speed .. 100 mm/sec. Ffedpjxab Ugsfx Afnou - CNC electro-motoric adjustment of the stop fingers (Z axes) * Travel range Z1 .. 405 - 1.565 mm * Travel speed .. 1.000 mm/sec. * Travel range Z2 .. 485 - 1.645 mm * Travel speed .. 1.000 mm/sec. - CNC electro-motoric table crowning - CNC pneumatic die displacement (I axis) - EHT pneumatic tool clamping - upper tool - EHT manual tool clamping - lower tool * Tool holder 90.0 mm + 13.0 mm possible - 1x freely movable 2-hand/foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging door) - original operating instructions + circuit diagram etc. * Special accessories included: - Oil cooler for use in continuous operation

Condition: used, Year of construction: 1996, pressure 175 t Fedoxab Exepfx Afnefu chamfer lenght 4050 mm distance between columns 3050 mm column arm 300 mm ajustment speed 140 mm/sec work speed 10.0 mm/sec return speed 130 mm/sec work stroke 360 mm dayligth 340 - 700 mm table height 1000 mm table width 200 mm oil volume 300 ltr. operating pressure max. 295 bar air pressure 4.5 - 6.0 bar voltage 3x 400 Volt total power requirement 15.0 - 27.0 kW weight 17200 kg range L-W-H 5850 x 2550 x 3200 mm good condition (!!) including new CNC control - in checked condition - machine video - ?v=Owh6BjvZ4RM Equipment: - electro-hydraulic CNC press brake - with new CYBELEC "VisiTouch 19" touch CNC control (conversion) * graphic numerical 2D control * 19? modern, streamlined touchscreen with glass surface * can also be operated with gloves * clear, well-arranged menus in the operator's language * easy operation thanks to the user-friendly HMI * large tool and product library - CNC controlled axes: * Y1+Y2 / X+X1 / R / Z1+Z2 / BV1+BV2 / I + CNC crowning - CNC electro-motoric back stop adjustment (X-axis) * Stop range X axis of bending line .. 5.0 - 1.000 mm * Adjustment speed .. max. 500 mm/sec. * Adjustment in X1 axis possible .. +/- 125 mm - CNC-controlled vertical adjustment of the stop fingers (R axis) * Adjustment range of table surface .. 85 - 235 mm * Adjustment speed .. max. 100 mm/sec. - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2 axis) - CNC-controlled / pneumatic die displacement (I axis) - 2x CNC-controlled front bending aids (BV axes) * Swivel angle max. .. 45 degrees * Swivel speed .. max. 45 degrees/sec. - CNC-controlled electric table crowning - pneumatic EHT upper tool clamp - pneumatic EHT lower tool clamp - 1x freely movable 2-hand/foot control - rear protective device (protective grille) - side protective device (swivel doors) - various bending tools - original operating instructions + circuit diagram etc.

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates Fjdpfx Aexab Tvefnsfu - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: good (used), Technical data: Working length: 8050 mm Column distance: 7550 mm Pressing force: 200 t CNC control: CYBELEC DNC 880 S Adjustable backgauge Dimensions (Length x Width x Height): approx. 8650 x 2900 x 3800 mm Weight: approx. 47 tonnes Note: The table extends approximately 3 meters into the floor. Accessories: Various tools Fjdpsya D A Isfx Afnefu The seller shall not be liable for typing or data transmission errors. The machine's condition, visually, mechanically, and regarding wear, is consistent with its age; used machines are sold without any form of warranty.

Condition: ready for operation (used), Year of construction: 2001, pressure 135 t chamfer lenght 3050 mm distance between columns 2550 mm dayligth 320 - 560 mm stroke 240 mm working feed 10.0 mm/sec return speed 150 mm/sec column arm 400 mm work height max. 1050 mm control DNC 1200 PS/B operating pressure max. 297 bar compressed air 4.5 - 6.0 bar connected load 15.0 kW oil volume 250 ltr. Ffedpfx Afox Ik D Aensu weight 11500 kg range L-W-H 5240 x 2400 x 2900 mm good/well-Maintained conditions used in Aluminum processing - in checked conditions - machine Video - ?v=z-Bxibk_8uE Features: - CNC Electro-Hydraulic Press Brake - CYBELEC CNC Control Model DNC 1200 PS/B * Swiveling Control Panel, Front Right * Numerical Programming * Tool & Program Library - CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning - CNC Electro-Motorized Backgauge (X-Axis) * with 3x Manually Adjustable Backgauge Fingers (Z-Axis) * Maximum Travel Speed: 250 mm/sec - CNC electro-motorized height adjustment from the backgauge (R-axis) * Maximum travel speed: 100 mm/sec. - CNC under-table crowning - CNC pneumatic die shifting (I-axis) - Pneumatic upper tool clamping - Pneumatic lower tool clamping - Rear safety guard, including swiveling door - 2x side safety guards - includes LAZER SAFE safety device - front - 2x stable front support arms with sliding system - original EHT split upper and lower tools - 1x freely movable 2-hand/foot control - Wiring diagram + hydraulic diagram

Condition: good (used), Year of construction: 2000, sheet width 3050 mm plate thickness 10.0 mm Ffjdpfjx Emqyox Afnou thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm good / well-maintained condition with special accessories (!!) Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side stop, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front - 1x freely movable foot switch - 2x front EMERGENCY OFF button - Operating instructions (PDF)

Condition: good (used), functionality: fully functional, Year of construction: 2005, controller manufacturer: ELGO, controller model: P8721, - Very well-maintained hydraulic guillotine shear EHT - Max. cutting length: 6050 mm - Max. sheet thickness at 450N/mm²: 6 mm - Pneumatic sheet support lift - Backgauge with positioning control - Ready for demonstration under power - Weight approx. 24 t Fodpfx Afox Sau Eenofu

Condition: good (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, controller model: DELEM DA-69 TW, bending force (max.): 300 t, working width: 6,050 mm, overall weight: 33,000 kg, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, - Press brake EHT / Trumpf 6050mm x 300t Fedpfx Aox Rvrdjfnjfu - Immediately ready for operation, well-maintained condition - CNC-controlled axes Y1 / Y2 / X / R / Z1 / Z2 / crowning - Extensive tool set - From facility closure, available for inspection under power - Matching guillotine shear 6050 x 6mm from EHT / Trumpf also available

Year of construction: 2005, condition: excellent (used), Very good, hardly used Ffedexbft Nopfx Afnju

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, controller model: Cybelec ModEva 10S, bending force (max.): 170 t, empty load weight: 16,300 kg, working length: 4,050 mm, TECHNICAL DETAILS Press force: 170 t Bending length: 4,050 mm MACHINE DETAILS Control: Cybelec ModEva 10S Machine weight: 16,300 kg EQUIPMENT Lasersafe 2 sheet supports Fsdpfx Aexwnv Ejfnjfu Die shifting Crowning Pneumatic tool clamping top and bottom Controlled axes: Y1, Y2, X, R, Z1, Z2 Tool cabinet with tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, controller model: Cybelec ModEva 19 T, bending force (max.): 300 t, distance between stands: 3,550 mm, oil tank capacity: 400 l, working length: 4,050 mm, The machine control was renewed in 2022! TECHNICAL DETAILS Press force: 300 t Bending length: 4,050 mm Distance between uprights: 3,550 mm Oil capacity: 400 l MACHINE DETAILS Control system: Cybelec ModEva 19 T Total power requirement: 22 kW Machine weight: approx. 20,000 kg EQUIPMENT 2 bending aids Matrix displacement Pneumatic tool clamping, top and bottom Crowning Controlled axes: y1, y2, x, R, z1, z2 Two-hand foot control 2 parking stations for bending aid Fedpfx Ajxwnqcjfnsfu

Condition: good (used), functionality: fully functional, Year of construction: 2008, Press force: 170 t Bending length: 4050 mm Machine weight approx.: 16,300 kg Control: ModEva 10S Equipment: - CNC control Cybelec ModEva 10S - Lasersafe - 2 sheet supports - Die shifting - Crowning system - Pneumatic tool clamping (top and bottom) - Controlled axes: y1, y2, x, R, z1, z2 Fsdpjxu I Ucofx Afnofu - Tool cabinet with tools

Condition: used, functionality: fully functional, Year of construction: 2002, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Oil volume: 300 l Control: CYBELEC DNC 1200 PS Eco Total power requirement: 15 kW Ffedpfoxfh R Esx Afnsu Machine weight approx.: 10,700 kg Dimensions (LxWxH): 4200x2200x3200 mm Accessories/Equipment: – 2 bending aids in front of the machine – Parking right/left for bending aids – 3 backgauge fingers – CYBELEC DNC 1200 PS Eco control

Condition: used, functionality: unexamined, Year of construction: 2016, machine/vehicle number: 24398, control type: CNC control, controller manufacturer: Cybelec, controller model: Modeva Pac 15, Used Cybelec Modeva Pac 15 controller for press brake, max 7 axes. Ffjdpjx Dh U Ijfx Afnsu

Condition: used, Year of construction: 1971, sheet width 2000 mm Fodeww Nccjpfx Afnofu plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t working width: 4500 mm clear support width: 3050 mm support throat: 300 mm rear stop: 1000 mm electrical connection: 380 V, 18,5 kW Fsdpfx Asb N Evmofnefu weight: 14,8 t space needed: 4200 x 2000 x 3000/3150 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 4,125 h, working width: 3,050 mm, sheet thickness (max.): 13 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Ffsdpjww E Nxjfx Afnsu Sheet width: 3,050 mm Sheet thickness: 13 mm Back gauge – electric: 10–1,000 mm Strokes: 16 strokes/min Control: Elgo MACHINE DETAILS Total power requirement: 22 kW Operating hours: approx. 4,124 h EQUIPMENT - Automatic cutting gap adjustment - Sheet lifting device - Foot switch - Digital back gauge 1,000 Elgo - Scrap chute - Rear safety guards - Angle stop - Material support arms

Condition: good (used), Year of construction: 2006, machine/vehicle number: B0617A0014, Offer 25376 Technical Data: - Max. cutting width: 3050 mm - Max. cutting capacity at 45 Kp/mm²: 13 mm - Hydraulic cutting angle adjustment - Number of hold-downs: 13 pcs - Front angle gauge - 4 front support arms - Motor-driven, position-controlled backgauge: 10 - 1000 mm - Cutting line illumination - Rear area safety with side grids and light barrier - Electric foot switch - Drive: 400 V / 20 kW - Required floor space approx.: W 4350 x H 2100 x D 2200 mm Ffedpfx Aoxp Hp Ujfnsu - Weight approx.: 8.5 t