Used Screw Clamp for sale (12,988)

Condition: new, Year of construction: 2022, Kaeser screw compressor SK 22 - 11 bar - exhibition piece - Chsdpfx Ahsvk R Dcs Isa Volume flow at 11.0 bar (g) 1.67 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 13.7 kW Max. overpressure 11.00 bar Drive motor efficiency at full load 91.2% Drive motor efficiency class IE3 Drive motor rated power 11.0 kW Drive motor speed 2960 rpm Drive motor protection class IP 55 Electrical supply 400V / 3 / 50Hz Compressed air outlet temp. above ambient temperature (at +20°C, 30% relative humidity) 6 K Sound pressure level 66 dB(A) Max. usable warm air volume 2500 m³/h Compressed air connection G 1 Cooling oil capacity 7.0 l Cooling oil type compressor SIGMA FLUID MOL Dimensions (W x D x H) 750 mm x 895 mm x 1260 mm Weight 312 kg Location: from stock 54634 Bitburg - available immediately -

Year of construction: 2010, condition: excellent (used), Kaeser SM 9 – 11 bar screw compressor Manufacturer: Kaeser Type: SM 9 Machine type: Oil-injected screw compressor Year of manufacture: 2010 Condition: Used screw compressor, ready for operation Max. operating pressure: 11.0 bar Delivery rate: 0.75 m³/min Motor rated power: 5.5 kW Compressed air connection: G 3/4 Electrical connection: 400V / 3Ph / 50Hz Dimensions W x D x H: approx. 630mm x 800 mm x 900 mm Sound pressure level: 64 dB(A) Csdpjhy Tzysfx Ah Ioha Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective Chedevmivcjpfx Ah Isa System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: excellent (used), very robust spindle press Pressing area: 40 x 50 cm Working height: approx. 50 cm Made of cast iron Cedpfozmytusx Ah Isha 80 kg

Condition: excellent (used), Very nice, robust spindle press. Pressing area: 40 x 50 cm. Working height: approx. 50 cm. Weight: 60 kg. Chedpfszmyr Rjx Ah Isa

Condition: used, length 1000 mm width 1000 mm height 800 mm weight of the machine ca. / t Clamping cube 1000x1000x800 mm Edge distance: 110 mm T-slot spacing: 180 mm Cjdpfx Ahszk Riuj Ijha Slot size: 34 mm Thickness: 115 mm Number of slots: 9 2 units available

Condition: excellent (used), functionality: fully functional, Starlinger Extruder - Single-screw extruder - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter/screen changer - Die installed Data sheet, see photos. Optionally available with water bath & strand granulator, etc. If you have any further questions, please do not hesitate to contact us. Commissioning and testing can be arranged. Available for immediate delivery. Chsdehgq Ahjpfx Ah Ija

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter - 4x heating zones - dosing Chedpju Hik Dofx Ah Ioa - Control system

Condition: excellent (used), The system is suitable for conveying, loosening, and gently mixing bulk materials, granules, powders, or similar materials. The special screw geometry with mixing/paddle sections not only transports the material but also moves and mixes it during the conveying process. Technical data: * Manufacturer: Waeschle / Wäschle * Type: DST 200 * Year of manufacture: 2001 * Screw diameter: approx. 200 mm * Motor power: 2.2 kW Chedozabrmepfx Ah Ija * Design: Stainless steel * Function: Conveying, loosening, mixing * Immediately available from stock

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw Chsdpfx Aox Dkmgoh Iea • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader Cjdpfx Ahoy A H Umj Ijha • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm • Screw center height: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.

Condition: like new (used), functionality: fully functional, As-new twin-screw volumetric feeder As shown in the photos, the unit features: • Twin screws with approx. 45 mm diameter • Integrated paddle mechanism (agitator) inside the hopper • Rectangular hopper with stainless steel liner • Driven by a 0.55 kW electric motor The feeder is in as-new condition and fully functional. Ideal for powders, granulates, or difficult-to-flow bulk materials. Cedpfxeyfm Epo Ah Isha

Condition: excellent (used), functionality: fully functional, Brabender Single Screw Extruder 30 mm – 30 L/D – with K-Tron Twin Screw Feeder – Strand Die For sale is a fully functional Brabender single screw extruder in a compact design, ideal for laboratory, development, or small-scale production applications. Technical Data: • Manufacturer: Brabender • Screw diameter: 30 mm • Process length: 25 L/D • Drive: 5.5 kW • Multi-zone heating system (5 zones) Cjdsyi Am Repfx Ah Ieha • Compact control cabinet with digital temperature control • Strand die adapted Features: • K-Tron twin screw feeder • Compact, clearly arranged control unit • Multiple heating zones with individual control • Melt temperature & melt pressure monitoring Condition: • Fully functional • Well-maintained overall condition • Ready for immediate use A trial run with customer material is available upon prior arrangement.

Condition: like new (used), functionality: fully functional, Used Brabender twin-screw feeder type DDW-H21-M-DDS20-50R • Year of manufacture: 1993 • Throughput range: 5 – 50 kg/h • Integrated agitator / paddle system in the hopper (as shown in the photos) Cjdpfxjyfm Spj Ah Ioha • Stainless steel hopper • Twin-screw design The feeder is in good condition, complete, and ready for immediate use. Ideal for powders, granulates, and poorly flowing bulk materials.

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm Chodpfx Ahoycuuyj Isa • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: new, functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm - Drive: Siemens motor 95 kW - Volumetric K-Tron dosing Chodjqy E Evjpfx Ah Ioa - Degassing zone - K-SWE 180 double piston screen changer / filter - strand nozzle - Control system Optionally with strand pelletizer, water bath etc. Inspection possible by arrangement

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 1,400 kg, empty load weight: 380 kg, drive type: Keine, Cellulose/Bale Clamp Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: None Technical Condition: Good Chsdpfsy A Uadex Ah Ija Description: Type 1.5T413, sideshift +/- 100 mm, sideshift independent of the opening range, overall width 970 mm, opening range 495 - 1,675 mm, arm height 440 mm, arm length 1,000 mm, arms smooth on the outside, inside with round bar, arm tips beveled, load capacity 1,400 kg at 500 mm load center, installation depth 158 mm, own center of gravity at 289 mm, weight approx. 380 kg, incl. pressure gauge, connection ISO - Class 2 A.

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 1,400 kg, empty load weight: 380 kg, drive type: Keine, Cellulose/Bale Clamp Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: None Technical Condition: Good Description: Type 1.5T413, sideshift +/- 100 mm, sideshift independent of the opening range, overall width 970 mm, opening range 495 - 1,675 mm, arm height 440 mm, arm length 1,000 mm, arms smooth on the outside, inside with round bar, arm tips beveled, load capacity 1,400 kg at 500 mm load center, installation depth 158 mm, own center of gravity at 289 mm, weight approx. 380 kg, incl. pressure gauge, connection ISO - Class 2 A. Cedpjzk Sblefx Ah Ioha

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 1,400 kg, empty load weight: 380 kg, drive type: Keine, Cellulose/Bale Clamp Chedpfx Ajzbn Eioh Iea Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: None Technical Condition: Good Description: Type 1.5T413, sideshift +/- 100 mm, sideshift independent of the opening range, overall width 970 mm, opening range 495 - 1,675 mm, arm height 440 mm, arm length 1,000 mm, arms smooth on the outside, inside with round bar, arm tips beveled, load capacity 1,400 kg at 500 mm load center, installation depth 158 mm, own center of gravity at 289 mm, weight approx. 380 kg, incl. pressure gauge, connection ISO - Class 2 A.

Condition: good (used), Year of construction: 2010, Screw compressor COMPAIR L15-10, serial number CD10001916004, pressure 10 bar, output 15 kW, year of manufacture 2010. Chjdpszqcmxsfx Ah Ioa Pressure vessel OKS, serial number 486069, volume 1,500 liters, year of manufacture 2001. Refrigerant dryer ALUP ADQ 180 (E6), serial number ITJ912677, year of manufacture 2025.

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Chsdodcmdljpfx Ah Ioa Stretch control Hold torque / position Friction torque test Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube Manufacturer: BAT Machine type: Shaker Fixture Cube / Mounting Cube Material: Magnesium For sale is a high-quality, used Shaker Fixture Cube made of magnesium, designed for vibration and shock testing systems. The mounting cube serves as a universal adapter and clamping device for securing test specimens, fixtures, and measurement setups on electrodynamic vibration testing systems (shakers). The precision-machined mounting surfaces with a threaded grid on all sides allow for the flexible implementation of various test setups. The magnesium design offers high rigidity with a low weight, making it particularly suitable for dynamic vibration and environmental testing. Technical data Manufacturer: BAT Type: Shaker Fixture Cube / Mounting Cube Material: Magnesium Dimensions: approx. 400 × 400 × 400 mm Thread size: M8 Threaded grid on all sides Precision-machined mounting surfaces Several large through-holes for mounting Features Robust, lightweight magnesium construction Precision-machined mounting surfaces Multi-sided threaded grid Large corner through-holes Industrial design Application areas Electrodynamic vibration testing systems Vibration testing Environmental testing technology Automotive testing technology Aerospace Electronics testing Testing and development laboratories Quality assurance Transport data Dimensions: approx. 400 × 400 × 400 mm Weight: approx. 35 kg Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear consistent with age. Scope of delivery Magnesium Shaker Fixture Cube Scope of delivery as shown in the pictures Shipping via freight forwarder or self-collection possible. Subject to changes, errors and prior sale. Chedpfx Aozkhxtoh Ioa

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube with Adapter Plate Manufacturer: BAT Machine Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Design: with lateral adapter plate For sale is a high-quality, used magnesium clamping cube for vibration and shock testing systems. The Fixture Cube serves as a universal clamping and adapter device for securing test specimens, fixtures, and assemblies on electrodynamic vibration testing systems (shakers). The precision-machined clamping surfaces with numerous threaded holes allow for the flexible configuration of various test setups. The laterally mounted adapter plate further expands the range of applications. Technical Data Manufacturer: BAT Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Dimensions: approx. 330 × 330 × 330 mm Precision-machined clamping surfaces Thread pattern on multiple sides Large through-holes at the corners Lateral adapter plate made of aluminum Features Magnesium lightweight construction Precision-machined clamping surfaces Multi-sided thread pattern Adapter plate made of aluminum Industrial design Application Areas Electrodynamic vibration testing systems Vibration testing Environmental simulation Automotive testing technology Aerospace Electronics testing Testing and development laboratories Quality assurance Shipping Data Dimensions: approx. 330 × 330 × 330 mm Weight: approx. 30–40 kg Chedpfezkhv Sex Ah Isa Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. Scope of Delivery Magnesium Shaker Fixture Cube Adapter plate Scope of delivery as shown in the pictures Shipping via freight forwarder or self-collection possible. Subject to change, errors and prior sale.

Condition: excellent (used), BAT Magnesium Shaker Fixture Cube Manufacturer: BAT Machine type: Magnesium Shaker Fixture Cube / Clamping Cube Material: Magnesium Thread size: M8 For sale is a high-quality used magnesium clamping cube for vibration and shock testing systems. The fixture cube is used for the flexible mounting of test specimens, fixtures, and adapters on electrodynamic shakers. The numerous M8 threaded holes on several sides allow for a wide variety of test setups to be realized. The magnesium design ensures high rigidity while maintaining low weight and is ideal for applications in environmental, shock, and vibration testing. Technical data Dimensions: approx. 300 × 300 × 300 mm Material: Magnesium Thread size: M8 Threaded holes on several sides Chedszkgqnspfx Ah Ioa 2 lifting eyes for transport Internally weight-optimized design Application areas Electrodynamic vibration testing systems Shock testing systems Environmental testing technology Automotive Aerospace Electronics testing Quality assurance Research and development Testing laboratories Equipment Robust magnesium design Precision-machined clamping surfaces Thread pattern on several sides Lifting eyes Industrial design Transport data Dimensions: approx. 300 × 300 × 300 mm Weight: approx. 30–40 kg Condition Used From industrial use. Normal wear and tear consistent with age. Optical condition as shown in the pictures. Scope of supply BAT Magnesium Shaker Fixture Cube Scope of supply as shown in the pictures Shipping by freight forwarder or self-collection possible. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Auction of two Kaeser screw compressors, one Kaeser refrigeration dryer, and one compressed air tank! Screw compressor Kaeser SK 22 Year of manufacture: 2020 Screw compressor Kaeser SK 19 Chodpfx Aszktnysh Iea Year of manufacture: 1995 Refrigeration dryer Kaeser TB 26 Year of manufacture: 2016 Compressed air tank Volume: 500 l Year of manufacture: 1986