Condition: used, Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Cgjb Et Dowaauno Stet Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Variable speed drive for X - Y Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Weight: 3 T

Condition: used, 10 meter deep hole boring machine Kramatorsk KJ1910 10-meter boring depth - Heavy duty: 25-ton workpiece foratrice per fori profondi Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx) Machine in our wahouse (I-25064 Gussago - BS - Italy) Cgeb Ejhcxvxst D Stet

Condition: good (used), Functionality: fully functional, Data: Tool holder MK 5--- Drilling capacity with ST60 50 mm--- Cob Eev S H Tcet D Stogt Infinitely variable speed ranges approx. 40 - 180 rpm + 180 - 800 rpm--- 5 feeds 0.1 / 0.14 / 0.2 / 0.28 / 0.4 mm/rev--- Table surface, 880 x 670 mm--- throat depth: 385 mm---

Condition: good (used), Drilling capacity in steel: approx. Ø 10 mm Spindle speed: 390 - 5000 rpm / 8 steps Projection: 180 mm Tool holder: MK 2 Quill stroke: 70 mm Table clamping surface: 240 x 220 mm Cjb Esrypb Set D Stogt Weight: approx. 80 kg Dimensions W x D x H: approx. 400 x 500 x 800 mm without trolley!

Year of construction: 2018, operating hours: 500 h, Condition: ready for operation (used), General Data Measurements width 4715 mm Measurements depth 7750 mm Measurements height 3700 mm Machine weight 22500 kg Control Unit Brand FANUC Model 0i Main Drive Spindle speed range 35–3000 rpm Spindle motor power 15/18.5 kW Tool taper ISO 50 Wire diameter 150 mm Movement X-Axis Movement 2200 Y-Axis Movement 1600 Z-Axis Movement 1600 W-Axis Movement 550 mm B-Axis Movement 0.001° Cgsbev U Etgs Et D Stet Table Outer length 1250 mm Outer width 1500 mm Table load 5000 kg Additional Equipment Tool Changer Type: Arm type / Tool Positions: 60 / Max Tool Diameter: Ø125 mm / Max Tool Length: 300 mm / Max Tool Weight: 25 kg / Tool Change Time: 9 seconds Standard Accessories: Fanuc 0i CNC control, spindle oil cooler, chip conveyor, high-pressure cooling system (30 bar), hydraulic system and central lubrication, electronic handwheel, workspace lighting, spindle vibration monitoring Optional Features: 0.001° table indexing, 3D Fanuc option for universal milling head This 5-axis MICROCUT HBM-4 boring machine was manufactured in 2018. It features a robust Meehanite cast iron structure, high spindle speeds with low vibration, and a Fanuc 0i CNC control for precision. The spindle supports a 150 mm diameter and operates at speeds up to 3000 rpm. The table can handle loads up to 5000 kg, with a working area of 1250 x 1500 mm. If you are looking to get high-quality boring capabilities, consider the MICROCUT HBM-4 machine we have for sale. Contact us for more information. Application Types Milling

Condition: new, Year of construction: 2025, Continuous/normal drilling capacity 18/20 mm Thread cutting capacity M12 (depending on pitch) Spindle MK II Drilling depth 100 mm Thread depth 240 mm Column diameter 82 mm Usable work surface W x L 340 x 280 mm T-slot size (arm), distance (mm), width dimension (mm) Number 2, 125, 13/26 Speed display: Digital Drilling depth display: Digital Drilling depth stop: quickly adjustable stop ring Manual drilling feed Table height adjustment with rack and pinion Motor three-phase - frequency-controlled, 230 V, 0.75 kW Spindle speeds continuously variable 30 - 3000 rpm Table work surface: 155 - 415 mm Foot work surface: 155 - 550 mm Machine dimensions: 355 x 705 x 1,825 Weight: 195 kg Ceb Et Devu Tmns Stogt Accessories Optional Drill package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Keyless drill chuck 3-16 mm (accuracy 0.17 mm), - Taper mandrel MK 2 B18 and reducing sleeve MK 2 to Mk 1 490.00 € D0Ezfi Factory guarantee: 3 years Free delivery including packaging (Germany only) Delivery time: immediately from stock NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Workbench drilling machine CINCINNATI P450 Spindle: CM2 Spindle exit: 100 mm Rotation from 310 to 3300 RPM Table size: 780 x 300 mm Maxi distance spindle nose/table: 450 mm Throat depth: 200 mm Cjb Ejh A H Ruot D Stegt Speed regulation by belt variator Total height on table: 900 mm Weight: approx. 150 kg

Condition: used, Year of construction: 1994, throat depth: 1,250 mm, Radial drilling machine Fab. Breda type. R 55-1250 Year of manufacture 1994 Technical details Make: BREDA Type: R 55-1250 Throat: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Tapping capacity in steel: M 50 Tapping capacity in cast iron: M 65 Drill spindle mount: MT 5 Throat: 1250 mm Cross travel of headstock: 930 mm Minimum/largest distance from base plate: 5360 – 1375 mm Vertical travel of the boom: 705 mm Cjb Eov Rpf Sjt D Stjgt Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speeds: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate 2070 x 910 mm Clamping area base plate 1325 x 910 mm Motor power 4.4 kW - 380 volts Dimensions (L x W x H) 2.1 x 1.0 x 2.5 m Weight 3 t Accessories Drilling table 750 x 600 x 550 mm Cooling Hydraulic clamping All information is subject to change. A demonstration is available at any time in our showroom.

Condition: used, Recording MK 3 Drilling capacity 30 mm Cgsb Etjv Rnhfs D Stet Quill stroke: 200 mm Drilling and milling unit can be swivelled 45° to the left and right Automatic motorized feed for the X-axis Coolant pump

Condition: used, bore capacity in steel (diameter) / mm throat / mm Cgjb Et D Sov Rgzqetjt bore stroke / mm total power requirement / kW

Condition: used, Table boring machine type: BF 55 Cgsb Et Dowb Uzlo Stst

Condition: good (used), Functionality: fully functional, throat depth: 355 mm, drilling capacity: 50 mm, rotational speed (min.): 32 rpm, rotational speed (max.): 1,400 rpm, overall weight: 1,700 kg, For sale: 1 used pillar drilling machine Cgob Etovytw Ds D Stst Manufacturer: WMW Saalfeld Type: BK50 AI Drilling capacity in steel: 50mm Thrust: 355mm Spindle mount: MK5 Speed: 32 - 1,400 rpm Table size: 770 x 640mm Clamping surface: 630 x 550mm Base plate: 490 x 530mm Machine weight: 1.7t The machine can be viewed in our warehouse in 09599 Freiberg.

Condition: good (used), Radial Drilling SCHLUMBERGER 36-12 Spindle: Ø 110 mm - Right rotation Cob Et D Sevxq Tgetsgt Cone: CM4 Spindle exit: 200 mm Rotation: from 40 to 750 RPM Table size: 1000 x 700 mm Slide travel: 700 mm Automatic descent Recent electrical panel Lubricant pump Voltage: 380 V Back table dimensions: 1200 x 750 mm Machine support dimensions: 1400 x 1200 mm Total height in height position: 2800 mm Total height in low position: 2550 mm Weight: approx 3,5 T

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, CNC controller: HEIDENHAIN TNC426PB Axes X-axis travel mm: 500 Y-axis travel mm: 350 Z-axis travel mm: 610 Distance spindle nose - table surface mm: 94 - 704 Feed rates m/min: 20 Rapid traverse m/min: 20 Worktable Table dimensions mm: 920x380 Max. workpiece weight kg: 250 Spindle Spindle speed rpm: 50 - 18.000 Spindle drive power kW: 10,2 (60% ED) Spindle torque Nm: 70 (bis 1.240 rpm) Tool system Tool holder: SK30 Tool magazine slots: 24 Max. Tool Diameter With free neighboring places mm: 125 With occupied neighboring places mm: 63 Max. Tool Length mm: 280 Max tool weight kg: 3 Tool-to-tool time s: 6 Chip-to-chip time s: 8 Equipment Electronic Handwheel Tool breakage probe Mist collector Cgob Et Djv Rlw Rj Stst Basic machine dimensions / weight Length mm: 2.000 Width mm: 1.700 Height mm: 3.000 Weight kg: 3.200

Year of construction: 1989, Condition: excellent (used), Coming up for sale: 1 used clamping / boring mill table Manufacturer: Skoda Type: E20OB22875 year: 1989 dimensions 2.000 x 2.000 mm part weight: up to 25t electr. adjustable mass: 10t Cjb Eteg Sbbme D Stsgt

Condition: like new (used), CNC vertical jig boring machine WMW MIKROMAT Travel X: 1120 mm Travel Y: 710 mm Spindle travel Z: 315 mm Travel W: 630 mm Numerical Command: CNC NUM 1060 Spindle: Ø 125 mm Cone: SA40 Rotation: from 36 to 2240 RPM Table size: 1400 x 900 mm Distance between colums: 1080 mm Cgjb Et D Ssgy E Dpetjt Maxi distance spindle nose/table: from 0 to 900 mm max Maxi eligible load on table: 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage: 380 V Dimensions (L x W x H): 4000 x 2460 x 3030 mm Weight: approx. 9 T

Condition: good (used), for sale: several used clamping brackets / boring mill brackets 1500 to 1800mm wide 2500mm high 1250mm deep Mass: 5,8t Load capacity 60t Csb Eog Sbbxet D Stjgt 6 pieces available partly with stairs

Condition: used, Radial Drilling Machine SCHLUMBERGER type RF6 Manual raising Cone: CM4 Spindle speed: from 35 to 1800 RPM Table size: 1000 x 650 mm Column slide travel along bed: 750 mm Maxi distance spindle nose/table: 700 mm (in high position) Mini distance spindle nose/table: 250 mm (in low position) Manual up/down of table + column Automatic descent Rotation at 360° on column Hydraulic column locking Drilling / tapping function Lubricant pump Voltage: 380 V Width: 1400 mm Depth: 900 mm Height in low position: 2650 mm Ceb Etev Iltmo D Stegt Height in high position: 3000 mm Weight: approx 3 T

Condition: used, Radial Drilling Machine OTTO MULLER Spindle: CM4 Cgjb Et D Sjv Nglgetst Spindle speed: from 70 to 1400 RPM Front table size: 1350 x 550 Back table size: 1000 x 400 mm Slide travel: 1000 mm Maxi distance spindle nose/front table: 600 mm Motor: 2 speeds Maxi column rise: 400 mm Auto descent Drilling/tapping function Spindle speed adjustment by belt variation Hydraulic locking Lubricant pump Voltage: 380 V Dimensions in low position: W 1500 x D 2400 x H 2300 mm Weight: approx 2 T

Condition: used, Year of construction: 1989, Drilling / Milling Machine IBARMIA B 32 F Travel X: 675 mm Cgjb Eewcf U Eet D Stjt Travel Y: 350 mm Travel Z: 600 mm Cone SA 30 Spindle exit: 200 mm Rotation: from 75 to 2375 RPM Table size: 1200 x 360 mm Year of construction: 1989 Maxi distance spindle nose/table: 700 mm Throat depth: 380 mm Swivel head at +/- 45° Table: X - Y manuel movements Motor: 2-speed motor Scale ACU-RITE Auto descent Drilling / Tapping function Watering Voltage: 380 V Width: 1600 mm Depth: 1600 mm Total height: 2500 mm Weight: approx 2 T

Condition: good (used), Column Drilling Machine ALZMETALL AB3 ESB Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Rotative table at 360° Cgob Et Doi Tvv Ae Stjt Automatic Descent 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg

Condition: good (used), Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Csb Et D Sovxqttstegt Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth: 2500 mm Total height: 2600 mm Weight: 4,5 T

Condition: good (used), Radial Drilling GSP 49S22 Spindle: Ø 125 mm Cone: CM6 Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Arm travel: 1800 mm Maxi height column travel: 1800 mm Column diameter: Ø 600 mm Total column height: 3000 mm Spindle speed: 11 kW Drilling/tapping function Mechanical locking of the column Hydraulic locking of the trolley Auto descent Delivered with one cube Cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Cgob Et Devxqt Te Stst Voltage: 380 V Weight: 12 T

Condition: good (used), Horizontal Boring Machine CORNAC C100 Travel X: 1000 mm Travel Y: 1000 mm Travel Z: 1260 mm Cgeb Etsvxrdas D Stst Fixed table Cone: SA 50 Spindle: Ø 100 mm Spindle exit: 550 mm Rotation: from 10 to 1250 RPM Table size: 1550 x 980 mm Surfacing plate: Ø 520 mm Spindle motor: 9,5 kW Scale 3 axes HEIDENHAIN Automatic Feeds: X - Y - Z Supplied with a set of cones Voltage: 380 V Dimensions (L x W x H): 4500 x 2100 x 2450 mm Weight: approx 8 T

Condition: good (used), Radial Drilling Machine BERGONZI type UT 25 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 130 to 900 RPM Arm travel: 500 mm Max height table/spindle nose: 900 mm Column: Ø 180 mm 2 speeds motor Auto descent Return Spring defective Electric arm rise Delivered with: 1 cube Length 500 mm x Depth 400 mm x Height 450 mm Cgsbsv Al H Nj Et D Stst 1 false table Lubricant pump Voltage: 380 V Length: 1500 mm Width: 900 mm Total height in height position: 2300 mm Weight: approx 1,2 T