Condition: excellent (used), Year of construction: 2020, Machine type: CNC machining center horizontal Manufacturer: DMGMORI Type: NHC4000 Commissioning: 2021 Control type: Mitsubishi M730BM Origin: Japan Storage location: Germany Delivery time: from stock Equipment Spindle speed 15,000 rpm, 30/18.5 kW - BT40 with face contact, pull stud: BT-90° - Internal coolant preparation - Chip conveyor - Automatic turning APC with 2 stations - Measuring probe (spindle) - Tool length measuring system - Mobile operator panel - B-axis 0.001° - Tool magazine for 60 tools - Coolant flushing gun with holder - Signal lamp 4 colors - Oil mist extraction interface - INTERLIT-TMF300/600 compact filter system 70 bar - Milling functions for pockets and islands - Fast canned cycles - 10 external M-codes - Increased 48 working coordinate pairs - Expansion of the part program memory to 1 MB with a maximum of 1,000 storable part programs Travel range X-axis approx. 560 mm Y-axis approx. 560 mm Z-axis approx. 660 mm Fsb Ejwir Skeruc Rspg Table 360° 0.001° Workpiece diameter approx. 630 mm Max. workpiece weight approx. 400 kg Max. speed approx. 15,000 rpm Spindle motor approx. 30/18.5 kW Number of tool positions approx. 60 Rapid traverse approx. 60 m/min Adapter taper BT40 Compressed air pressure bar, L/min approx. 5, 300 bar, L/min Power consumption approx. 37.3 kVA Footprint L x W x H approx. 2.70 x 4.20 x 2.54 m Machine weight approx. 7,600 kg This offer is subject to change and non-binding. (Subject to changes, errors, and prior sale)

Condition: used, Year of construction: 2008, Table size 700 x 500 mm X/Y/Z - 600/500/500 mm Spindle speeds 10000rpm Spindle taper ISO 40 No. of stations in tool changer 20 Table load 500 kg Control: Fanuc 0i-MC Fob Erucswigfrs Rspg Equipped with: 20 pcs tool holders

Condition: excellent (used), Fries Research & Technology Device name: FRT MicroProf® MPR 1250 The FRT MicroProf® MPR 1250 is a high-precision surface metrology system from the MicroProf® series from Fries Research & Technology GmbH (FRT). These systems are designed for the non-destructive and non-contact analysis of surface parameters such as topography, roughness, coating thickness, and more. Features of the FRT MicroProf: Measurement modes: The device operates both as a 2D optical profilometer and as a 3D imaging system. A scanning method or a direct imaging sensor is used. Measurement range: Height range: Up to 3 mm, depending on the sensor used. Lateral resolution: Typically 1–2 µm, depending on the sensor configuration. Technical features: Modular multi-sensor design: Allows the combination of different sensors for different measurement tasks. High resolution: Offers measurements in the sub-nanometer range. Flexibility: Can be used for various applications in the semiconductor industry, microsystems technology, optics, automotive industry, and photovoltaics. Automation: Supports fully automated measurements for high throughput rates. Areas of Application The MicroProf® MPR 1250 is used in various industries, including: Fpjbswh Swdj Eruc Reg Semiconductor industry: For the analysis of wafers and microchips. Microsystems technology (MEMS): For the investigation of microstructures. Optics: For the measurement of surfaces in optical components. Automotive industry: For checking component tolerances. Photovoltaics: For the analysis of solar modules. Weight approx. 500 kg Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Gauge block box, gauge blocks, gauge block boxes, parallel gauge block set -Manufacturer: Carl Mahr, gauge block set of parallel gauge blocks, 46 pieces -Final dimensions: 1.0 - 100 mm -Measurement accuracy: Accuracy grade I Fpob Ejk Hdr Eoruc Rjg -Dimensions box: 370/120/H60 mm -Weight: 2.8 kg

Condition: good (used), Year of construction: 1998, CNC Vertical Machining Center MORI SEIKI SV500-50, Year 1998, Fanuc MSC-518 Control With pallet changer. Table: 1100x600mm BT50 spindle mount, 40-position magazine. Spindle speeds up to 6,000 rpm Travels: X800, Y510, Z510, Rapid traverse 32 m/min Machine without magnetic chipboard. Fsb Erucewifzlj Rspg Complete machine documentation available.

Condition: excellent (used), Year of construction: 1998, Hardinge HXL-S CNC Lathe Fagor Control Year 1998 Manuals Great Condition - Fully Working with no faults. We welcome any inspections Fsb Ersr Nc Etouc Repg

Condition: excellent (used), Machine type CNC lathe Manufacturer: Mori Seiki Type: NLX2500Y/700 Year of manufacture: 2018 Control type: Celos Origin: Japan Storage location: Germany Delivery time: from stock Turning diameter max. approx. 366mm Standard turning diameter approx. 275mm Chuck size approx. 250mm Turning length approx. 705mm Bar diameter max. approx. 80mm Turret stations 12 X-axis approx. 260mm Z-axis approx. 795mm Y-axis approx. 100 (+-50)mm Tailstock approx. 734 mm Spindle speed max. approx. 4,000 rpm Fsb Erewir Rtsuc Ropg AGW speed max. approx. 10,000 rpm Rapid traverse X/Z approx. 30 m/min Rapid traverse Y approx. 10 m/min Main spindle ISM 80, 15/18.5/18.5 kW, 4,000 rpm - Hollow clamping cylinder for chuck - Double foot switch - Y-axis with 100 mm travel - Rotating tools with 40/14 Nm, 10,000 rpm - 12-way BMT60 star turret - Extended overhang length of 100 mm - NC tailstock cone for a rotating center MK 5 - Hinge belt chip conveyor - Coolant pump (0.8 kW} 5 bar - MABEO filter unit with 1.5 MPa - Signal lamp - Integrated parts catcher - Electric 1/F for multi-channel bar feed - Alternating speed - Milling functions for pockets and islands - Fast fixed cycles (Errors in the technical data and information excepted)

Condition: good (used), Year of construction: 1984, CNC Optical Profile Grinding Machine Wasino GLS-130AS Fsbep R Rm Io Eruc Rspg 1984

Condition: used, Trumpf Type: TruDisk 4002 / W20.HL29 Trumpf TruDisk 4002 laser beam source with KLH cooler The Trumpf TruDisk 4002 laser beam source is an industrial disk laser source (disk laser) from TRUMPF, characterized by high power, beam quality, and efficiency. It is frequently used for welding, cutting, and other material processing applications. Maintenance has been performed regularly. Unit consisting of a beam source with associated cooler, but without optics and fiber optic cable. Technical Specifications Laser power: 4,000 watts (4 kW) (minimum 80 W) Wavelength: ~1030 nm (infrared range) (Yb:YAG) Beam quality (BPP): typically ≤ 8 mm mrad Fiber connection: TruDisk lasers usually have multiple fiber connections Cooling: Water-cooled – via a KLH cooler Dimensions: 1.0 x 2.0 x H1.6 m (laser) + 1.0 x 1.5 x 1.8 m (cooler) 380 V -10% ... 460 V +10%, 3AC + PE 23 kW / 25 kV A - 34 A / 400 V 50 ... 60 Hz KLH cooler: The KLH cooler is an industrial liquid cooler that ensures heat dissipation from high-performance laser systems such as the TruDisk 4002. Typical Features: Water-to-water cooling Precise temperature control (typically 20–25°C) Refrigerant: R 404A Can be controlled via TRUMPF interface Required to comply with laser specifications Device Type W20.HL29 Weight: 850 kg (laser) + estimated 550 kg (cooler) Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) Fpsb Eruowh Rnzjc Rjg We are happy to answer any further questions over the phone.

Condition: used, Year of construction: 1991, total height: 2,680 mm, total length: 4,500 mm, total width: 2,150 mm, Empty weight: 4.000 kg - Year: 1991 - Documentation available: Yes - Motor power: 15.0kW - Turning diameter: 360mm - Center distance: 805mm - Max. spindle speed: 4200rpm - Bore diameter: 80mm - Removable bed: Yes - Turning diameter removable bed: 600mm - Digital: No - Transport dimensions: 4500mm x 2150mm x 2680mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fsb Ejwhx E Usruc Rjpg Bram van Summeren

Condition: excellent (used), Year of construction: 2006, operating hours: 21,257 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 200 kg, total height: 2,500 mm, total length: 2,800 mm, total width: 2,200 mm, table width: 380 mm, table length: 500 mm, table load: 200 kg, rotational speed (max.): 18,000 rpm, overall weight: 6,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 21,257 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 315 mm, tool diameter: 130 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Deckel Maho DMU 50 eVo Linear 5 Axis Machining Centre Machine Type: 5 Axis Machining Centre Year: 2006 Control: Heidenhain iTNC530 Spindle On Hours: 21257hrs Condition: Very Good Fpjb Erswip Snouc Reg Includes Selection of Tool Holders Swarf Conveyor Electrostatic Oil Mist Filter Rittal Cabinet A/C Unit Technical Specifications Table Dimensions: 500 x 380mm Max Table Load: 200kg X Axis Travel: 500mm Y Axis Travel: 450mm Z Axis Travel: 400mm B Axis Travel: 180 Deg C Axis Travel: 360deg Spindle Speed: 18,000rpm Spindle Taper: BT40 ATC: 30 Stations Max Tool Diameter: Ø130mm Max Tool Length: 315mm Max Tool Weight: 8kg Machine Dimensions: 2800x2200x2500mm Machine Weight: 6500kg (approx)

Condition: used, Year of construction: 1990, Hydraulic Guillotine Shear Manufactured by ATLANTIC, Type ATS 3012 Year of Manufacture: 1990 Technical Specifications Manufactured by ATLANTIC Type ATS 3012 Year of Manufacture: 1990 Sheet Size: 3000 x 12 mm Cutting Angle Adjustment: 0.5 – 3 degrees Fpeb Eruewif I Ejc Rog Number of Hold-Down Clamps: 18 Length of Angle Stop: 1000 mm Working Height: 900 mm Motor Power: 22.5 kW Dimensions: Approx. L 4.20 x W 2.00 x H 2.20 m Weight: Approx. 8 t Features • Angle Stop • Manual Cutting Gap Adjustment • Automatic Cutting Angle Adjustment • Motorized Backgauge with Fine Adjustment All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: used, Year of construction: 2017, Used Mori Seiki NHX4000 2nd 1 Model: NHX4000 2nd Manufacturer: DMGMORI Control: CELOS Mitsubishi Year of manufacture / Commissioning: 2017 / 2018 Technical specifications Travel range X-axis approx. 560 mm Y-axis approx. 560 mm Z-axis approx. 660 mm Table 360° 0.001° Workpiece diameter approx. 630 mm Max. workpiece weight approx. 400 kg Max. speed approx. 15,000 rpm Spindle motor approx. 30.7/26/18.5 kW Number of tool positions approx. 60 Rapid traverse approx. 60 m/min Adapter taper BT40 Compressed air pressure bar, L/min approx. 5, 300 bar, L/min Power consumption approx. 37.3 kVA Footprint L x W x H approx. 2.70 x 4.20 x 2.54 m Machine weight approx. 8,500 kg Spindle speed 15,000 rpm, 30.7/18.5 kW - BT40 with face contact, pull stud: BT-90° - Internal coolant supply Preparation - Chip conveyor - Automatic turning APC with 2 stations - Measuring probe (spindle) - Tool breakage detection system - Mobile operator panel - B-axis 0.001° - Tool magazine for 60 tools - Coolant flushing gun with holder - Signal lamp 4 colors - Knoll Compact filter system 70 bar - Milling functions for pockets and islands - Fast canned cycles - Increase in the number of working coordinate pairs by 48 Fpjb Eewir Rmjruc Rog This offer is subject to change and non-binding. (Subject to changes, errors, and prior sale expressly reserved)

Condition: used, Year of construction: 2007, Used 2007 Mori Seiki NH 5000- DCG 4-Axis Horizontal Machining Centre with MSX701- iii control, CAT 40 14,000 RPM spindle, 60 tool ATC, twin pallet Horizontal with HP Coolant swarf management and Probing, in super condition with 17,000 hours cutting time recorded. Very accurate and well maintained by DMG since new machine having spent its life in a 1st Tier Aerospace sub-contractor. Axis X 730 mm Axis Y 560 mm Axis Z 629.9 mm Control MORIC MSX-701II B Axis- Yes Table length 500 mm Table width 500 mm Max. part weight 499.1 kg Number of tool pockets 60 Spindle taper CAT 40 Max. spindle speed 14000 rpm Spindle motor power 18.6 Kw Length x width x height 2349.5 × 2311.4 × 2616.2 Weight 9582.6 kg Stock number: cmj/0203 Fpsb Erucsvkwlgo Reg Control: MORI MSX-701-iii Accessories: CAT 40 14,000 RPM spindle, 60 tool ATC, twin pallet Horizontal with HP Coolant swarf management and Probing Name of the machine: Mori Seiki NH 5000 DCG / 40 No of pallets: 2

Condition: like new (used), Year of construction: 2022, operating hours: 789 h, Machine has done 789hours from new! General Specifications: • Swing Over Bed: 550 mm (21.65 inches) • Max. Cutting Diameter: 300 mm (11.81 inches) • Max. Cutting Length: 300 mm (11.81 inches) • Chuck Size: 6 inches • Machine Weight: Approximately 3,200 kg Axis Travels: • X-Axis Travel: 170 mm (6.69 inches) Fpsb Esv Dlr Usruc Rjg • Z-Axis Travel: 335 mm (13.19 inches) • Rapid Traverse Rates: 36 m/min (X and Z axes) Spindle: • Spindle Speed: Up to 6,000 RPM • Spindle Motor Power: 11/7.5 kW • Spindle Nose: A2-5 • Spindle Bore Diameter: 56 mm (2.20 inches) • Bar Capacity: 45 mm (1.77 inches) Turret: • Number of Tool Positions: 12 stations • Turret Type: BMT-55P • Indexing Time (1 face): 0.15 seconds Additional Features: • Slant Bed Design: 45-degree slant bed for enhanced rigidity and chip disposal • High-Rigidity Linear Guideways: Ensures precision and durability • Compact Footprint: Optimized for space-saving without compromising performance

Condition: used, Year of construction: 1999, total height: 2,100 mm, total length: 4,500 mm, total width: 2,450 mm, Empty weight: 2.550 kg Travel: 500x350x300mm Max. workpiece: 1050x800x295mm / 800kg With a lot of belogings - Year: 1999 - Documentation available: Yes - CE mark available: Yes - Serial number: 58k20365 - Control: CNC - Transport dimensions: 4500mm x 2450mm x 2100mm (l x w x h) - Transport weight [kg]: 2550kg - Transport packages [pcs.]: 4 Fjb Erucowhxp Ho Rjpg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: ready for operation (used), Year of construction: 2008, Main Drive Spindle speed range 18000 Number of axis 5 Movement X-Axis Movement 1750 mm Y-Axis Movement 1400 mm Z-Axis Movement 650 mm This 5-axis FPT STINGER XL CNC milling machine was manufactured in 2008. Ideal for complex and precise milling tasks, it offers advanced capabilities for a variety of applications. Consider the opportunity to buy this FPT STINGER XL CNC milling machine. Contact us for more information about this machine. Application Types Feb Erjvz Irxouc Rjpg Milling

Condition: used, Year of construction: 2011, Plasma cutting machine Fab. MicroStep type. SPL-PRA 7501.30 Year of manufacture 2011 Technical specifications Manufacturer: MicroStep Year of manufacture 2011 Model: SPL-PRA 7501.30 Working area length: 7500 mm Working area width: 3000 mm Equipment • MicroStep CNC control iMSNC Connection voltage: 400V, 3-phase, 50 Hz Max. connected load: 6 kW Fuse protection: 16 A • Plasma source: Kjellberg HiFocus 360i Continuously adjustable: from 10 to 360 A Duty cycle: 100% at 360 A Connection voltage: 400V, 3-phase, 50 Hz Fuse protection: T 125 A Max. connected load: 87 kVA Dimensions: 1030 x 680 x 1450 mm Weight: 517 kg • Kjellberg KWE 360 cooling water unit Connection voltage: 400 V, 3 Ph, 50 Hz Fuse: T 10 A Max. connected load: 1.75 kVA Coolant: Kjellfrost -15/-25 Febjwif Ixs Eruc Ropg Dimensions: 670 x 680 x 1060 mm Weight: 103 kg • Oscillating conveyor table • Connection voltage: 400 V, 3 Ph, 50 Hz The extraction table is not included in the scope of delivery. All information is provided without guarantee. A demonstration is available at any time in our showroom.

Condition: excellent (used), Year of construction: 2023, Machine type: CNC turning-milling center Manufacturer: DMGMORI Type: CLX450TC with short bar loader Year of manufacture: 2023 Control type: Siemens Operate Technical data Turning diameter max. spindle 1+2 approx. 400 mm Turning diameter standard spindle 1+2 approx. 250 mm Rod diameter max. spindle 1 approx. 65 mm X-axis approx. 750 mm Z-axis approx. 1,100 mm Y-axis approx. +-100 mm A-axis (spindle 2) approx. 1,200 mm B-axis approx. 240° (+-120°) mm Spindle speed 1+2 approx. 5,000 rpm Milling spindle speed approx. 12,000 rpm Rapid traverse X/Y/Z approx. 40 m/min Rapid traverse A spindle 2 approx. 40 m/min Rapid traverse B axis approx. 70 m/min Power spindle 1+2 max. approx. 17 (40%) kW Milling spindle power max. approx. 10.5 (40%) kW Main drive spindle 1/2 17KW 40% - 5000rpm - Turning/milling spindle HSK63 10,5KW 40% - 12.000rpm - Tool magazine 60 places - Automatic door - Coolant supply through the counter spindle - BFA 8/20/bar, 600 I Fpob Erowir Rajuc Rsg - Chip conveyor - Measuring probe - Coolant spray gun - Main spindle chuck - Counter spindle chuck - Parts catcher - LNS short bar loader

Condition: excellent (used), max. workpiece diameter 300 mm hobbing length 1000 mm clamping length 2400 mm spindle head ISO 40 distance work spindle /surface of the table 180 - 330 mm surface area 2410 x 375 mm longitudinal feed 1000 mm vertical movement of the milling spindle 150 mm turning speeds 45 - 500 U/min weight of the machine ca. 5,6 t Fpeb Erjvi Sf Ejuc Rjg dimensions of the machine ca. 3,0 x 1,6 x 1,9 m

Condition: good (used), Year of construction: 1982, Functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Fpjb Eruewid Spjc Rog Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: used, Year of construction: 2007, total height: 1,000 mm, total length: 1,400 mm, total width: 1,300 mm, outer dimension length: 1,400 mm, outer dimension width: 1,300 mm, Empty weight: 300 kg Volume: 220L Sleeve-diameter: 250mm Diameter: 1190mm Input-height: 1070mm Fob Erucewhxnio Repg Output-height: 645mm - Year: 2007 - Documentation available: No - CE mark available: Yes - Serial number: 40078/07 - Control: Conventional - Motor power: 3.0kW - Transport dimensions: 1400mm x 1300mm x 1000mm (l x w x h) - Transport weight [kg]: 300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: ready for operation (used), Year of construction: 2002, General Data Measurements width 2700 mm Measurements depth 4200 mm Measurements height 2650 mm Machine weight 11500 kg Control Unit Brand MAZATROL Model PC-FUSION-CNC Movement X-Axis Movement 560 Y-Axis Movement 610 Z-Axis Movement 560 Additional Equipment Tool Capacity: 64 positions Maximum Tool Diameter: 150 mm /Maximum Tool Length: 375 mm/ Maximum Tool Weight: 12 kg This 4-axis Mazak FH-4800 horizontal machining center was manufactured in 2002. It offers robust and precise machining capabilities, ideal for a variety of applications. Consider the opportunity to buy this Mazak FH-4800 horizontal machining center. Contact us for more information about this machine. Application Types Milling Fob Erujwh A I Tec Repg

Condition: used, total height: 1,400 mm, total length: 600 mm, total width: 600 mm, outer dimension length: 600 mm, Empty weight: 200 kg - Documentation available: No - Grinding diameter: 32mm Fsb Erucowhxfno Repg - Transport dimensions: 600mm x 600mm x 1400mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2007, total height: 1,000 mm, total length: 1,400 mm, total width: 1,300 mm, outer dimension length: 1,400 mm, outer dimension width: 1,300 mm, Empty weight: 300 kg Max. workpiece: 80mm Sleeve-diameter: 250mm Input-height: 860mm Output-height: 830mm - Year: 2007 - Documentation available: No - CE mark available: Yes - Serial number: 40080/70 - Control: Conventional Fpsbowhxfhs Eruc Reg - Motor power: 0.8kW - Transport dimensions: 1400mm x 1300mm x 1000mm (l x w x h) - Transport weight [kg]: 300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren