Condition: used, Year of construction: 1974, min. module 1 max. module 10 voltage 220/380 V frequency 50 Hz hole in dividing head spindle 145 mm total power requirement 14 kW weight of the machine ca. 4,7 t dimensions of the machine ca. 3,5 x 2,3 x 1,8 m 1) Working area: - Largest module to be milled: 10 - Largest travelling distance of the table slide: 695 mm - Largest centre distance: 870 mm - Largest workpiece diameter dk2: 300 mm - Smallest number of teeth that can be milled z2min Machine with 2-speed indexing gear: 4 Machine with 1-speed indexing gear: 8 2) Dimensions: - Bore of dividing head spindle: 145/141 mm - Centre distance between milling cutter and workpiece min. 50 mm max. : 170 mm - Largest clampable hobbing cutter Length b1: 170 mm Diameter dk1: 150 mm - Diameter of cutter arbours (standard accessories): 32, 40 mm Dkohovkyamexzn Haol - Drive taper for milling arbours: 5 Morse taper - Taper for tailstock centre: 4 Morse tapers - Largest tangential path i+: 60 mm 3) Speeds and feed ranges: - Milling cutter speeds: 35.5, 45, 56, 71, 90, 112, 140, 180, 224, 280, 355 rpm - Axial feed: 0.25 .... 4 mm/WU - Radial feed: 0.175 .... 0.995 mm/WU

Condition: used, Year of construction: 2011, Waterjet cutting machine Manufacturer: Flow Type: MACH4 4020 Year of manufacture: 2011 Pump operating hours: approx. 6,895 Cutting area: 4,000 x 2,000 mm Pump: 6,000 bar 2 cutting heads (1 disconnected) Incl. software Accessories Replaced in 2024/06 Control for automatic sand feed Dkohxznjwhwbze Haol Air conditioning units in control cabinet Various seals and valves on the pump replaced: 08/2024 Major pump maintenance: 03/2024 05/2025

Year of construction: 2017, operating hours: 5,010 h, Condition: used, machine/vehicle number: HM1-1304, Turning diameter: 330 mm, turning length max.: 600 mm, travel (X/Z): 165+35/600 mm, B-axis, bar capacity: 52 mm, speed: max. 6,000 rpm, control FANUC Series 0i-TF, 12-station tool turret with driven tools, chip conveyor, machine weight: approx. 6,000 kg, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dkshxzswh Tytsn Hael

Condition: excellent (used), Thread plug gauges different sizes M 80 x6 6 H. 476,00 Euro M 80 x 6 7 H. 476,00 Euro M 64 6 H Left 340,00 Euro M 62 6 H Good& scrap 320,00 Euro M 55. x 3 6 H 240,00 Euro M 55 x 1.5 6 H 240.00 Euro M 48 x 2 6 H 240,00 Euro are also sold individually Dkjhxznsipxynj Haol

Condition: used, Dear Sir or Madam, Dshxjwhnl Rjzn Haekl We are offering a polishing machine with accessories below.

Condition: good (used), Year of construction: 2017, CNC Lathe - Horizontal Manufacturer: HWACHEON Machine Model: HI-TECH 450 BL YMC Control: Fanuc i-Series Year of Manufacture: 2017 TECHNICAL DATA Max. Turning Length: (mm) 1,214 Max. Turning Diameter: (mm) 420 Chuck Size: (mm) 305 Max. Turning Diameter Over bed: (mm) 700 Travel paths - X-axis: (mm) 280 - Y-axis: (mm) 120 - Z-axis: (mm) 1,390 Rapid traverses - Rapid traverse X/Y/Z: (m/min) 20 / 10 / 24 Spindle - Bar capacity: (mm) 89 - Max. speed: (rpm) 2,500 - Drive power: (kW) 22 / 18.5 - Torque: (Nm) 1,050 / 883.8 Turret - Tool positions: 12 - Tool positions for driven tools: 12 - Tool holder: BMT-65 EQUIPMENT FEATURES + Flat guideways + C-axis + Y-axis Dshxzn Hjwhpgcjaskl + Blow-out gun + Steady rest carrier (suitable for SMW Autoblock) SLU-X-3-Z501215Z (SMW steady rest not included) + Manual steady rest, manufacturer RICHTER + Chip conveyor + Automatic tailstock and quill + Work light + Coolant tank capacity: 240 liters Power consumption: 55 kVA Weight: approx. 7,800 kg

Condition: like new (used), amount 1 Set Year unbekannt Jahr dimensions of the machine ca. 0 m Dkshovx Uzhsxzn Hasl

Condition: good (used), Year of construction: 1992, Weld edge beveling machine Dkohxznjvwdk Nj Hael Manufacturer: INDUMASCH Type: V20 Year of manufacture: 1992 Material thickness: 6 - 45 mm Weight: approx. 300 kg 080525ä

Year of construction: 2004, operating hours: 27,349 h, Condition: used, machine/vehicle number: AN0184, Turning diameter: 280 mm, turning length: 550 mm, travel (X/Z): 200/570 mm, C-axis, FANUC Series 21i-TB control, 12-station tool turret with driven tools, maximum speed: 5,000 rpm, chip conveyor, machine weight: approx. 5,500 kg, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dshxzn Hewh Tymsaokl

Condition: excellent (used), Rotary table with rotary indexing Raster font 15 degrees ,corresponds to 24 pitch Possible division by degrees on the circumference accuracy 1 degree can be used horizontally and vertically Chuck Forkhardt F 160 with hard jaws Dimensions horizontal : height 135 mm width 270 mm depth 220 mm Dkjhxzn Hen E Nubjaol Dimensions vertical height with chuck 125 mm Hole in the chuck 42 mm width 270 mm depth 135 mm total height 220 mm Weight 28 kg

Condition: good (used), Year of construction: 1992, honing diameter 79,375 mm stroke 150 mm spindle turning speed - stepless 200-2500 U/min stroke speed 60-350 Dop.m/min total power requirement 2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,5x1x1,6 m Dkehxznoul Etqj Haol SN-Nr. 189101

Condition: good (used), Year of construction: 2008, Crack testing machine Dkjhovmzm Hsxzn Hasl Manufacturer: K+D Flux-Technic Type: Universal 4000 ACC Year of manufacture: 2008 Clamping length: 4,000 mm Test diameter: approx. 400 mm Workpiece weight: 2,400 kg Workpiece handling: minimum 200 mm 080525ä

Year of construction: 2012, operating hours: 8,758 h, Condition: used, machine/vehicle number: AT0602, Turning length: approx. 700 mm, turning diameter max.: 400 mm, travels (X/Y/Z): approx. 275/80/700 mm, 16-station tool turret with driven tools, C/A axis, control FANUC Series 31i-Model A, counter spindle, 12-station tool turret, with driven tools, speed: max. 5,000 rpm, tool holder: VDI 30, chip conveyor, Caution: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dkohxswh Tygezn Haol

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1,5 total power requirement 62 kW weight of the machine ca. 12 t dimensions of the machine ca. 4,7x4,4x2,45 m max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - workpiece spindle passage 90 mm Djhxzn Houl Etdoaekl Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min

Condition: used, Year of construction: 2011, operating hours: 9,191 h, machine/vehicle number: 18514, Travels (X/Y/Z): 630/560/510 mm, max. spindle speed: 12,000 rpm, 40-station tool changer, SK 40 tool holder, FANUC control, KNOLL 500 K-1 chip conveyor, KNOLL KF 200/FKA 1300 compact filter system, year of manufacture: 2017, Attention: The machine still contains drilling emulsion and must be vacuumed, taken away and disposed of properly by the buyer!!! Dkehxswh Tyyozn Hasl

Condition: good (used), max. wheel diameter 630 mm gear width 375 mm max. module 10 clamping table 550 mm table hole 125 mm milling spindle speeds infinitely variable 62 - 390 U/min taper MORSE 5 axial-feeds 0,40 - 6,80 mm/U radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm no. of teeth min. 8 milling cutter dia. x width 192 / 215 mm shifting 200 mm main drive motor 7,5 kW total power requirement 21 kVa weight of the machine ca. 8,2 t Equipment of the machine: - Universal milling head with tangential displacement - Pressure reducing valve for counterholder Djhxznoua It Uj Haskl - Magnetic chip transport - Year of construction approx. 1976

Condition: used, Year of construction: 2011, operating hours: 16,613 h, machine/vehicle number: H-H41025, Travels (X/Y/Z): 1,020/&610/610 mm, spindle speed max.: 12,000 rpm, tool holder SK 40, 40-station tool changer, Ultimax control, chip conveyor, Attention: Machine still contains drilling emulsion and must be vacuumed out by the buyer, taken away and disposed of properly!!! Dkshswh Ty Hsxzn Hasl

Condition: like new (used), amount 39 STK Djhsu A I A Doxzn Haokl Broaching tool, broach, special tool, grooving tool, grooving machine, grooving machine, grooving jointing machine, grooving jointing tool, broach - Manufacturer: KARL KLINK, Various broaches in a complete package, with cabinet. Quantity= 39 pcs. Unit price per piece = 140,00€ / per piece Complete purchase with cabinet = 120,00€ / per piece

Condition: good (used), Year of construction: 1975, max. wheel diameter 400 mm gear width 290 mm max. module 6 min. module 0,5 weight 4,6 t voltage 220/380 V frequency 50 Hz dimensions 3010 x 1800 x 2200 mm total power requirement 17 kW Working area: 1. largest module to be milled 6 mm 2. straight toothing a) Largest workpiece Ø 400 mm b) Largest length of toothing 290 mm 3. smallest number of teeth to be milled Dshxzneul Em Re Hajkl for 1-speed sub-gear 6 with 2-speed gearbox 3 Dimensions: 1. Ø of the workpiece table 400 mm 2. Ø of the table dimensions 80 mm 3. diameter of the workpiece mandrel 36 mm 4. largest clampable milling cutter: Ø diameter 160 mm Length 160 mm 5. diameter of the milling cutter arbour 32; 40 6. centre distance between milling cutter and workpiece a) Largest distance 300 mm b) Smallest distance 30 mm 7. drive cone for milling arbors MK 4 8. maximum milling cutter displacement: a) Tangential milling 120 mm b) Shifting 100 mm Accessories: Interchangeable wheels

Condition: used, Year of construction: 1998, workpiece diameter with ratio 1:10 300 mm workpiece diameter with ratio 1:1 212 mm max. number of teeth 200 min. number of teeth 6 x-travel 300 mm X - Axis speed 0,1-5.000 mm/sec. y-travel 400 mm Y - Axis speed 0,1-5.000 mm/sec. A - axis -170 / +170 ° control Siemens Sinumerik 840 C Dkohxjul El Tszn Hajl total power requirement 38 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,20 x 2,20 x 2,10 m incl. suction

Condition: good (used), Year of construction: 1975, tool taper MK4 diameter of tools max. Ø 145 mm table-size L: 800 x B: 700 mm surface area Ø 300 mm table travel 200 mm indexing max 5 Modul total power requirement 7,5 kW weight of the machine ca. 4,9 t dimensions of the machine ca. 2,8 x 1,5 x 2,3 m Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm Dkohxznou Imbvs Haol -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of milling/clamping spindle with counter-holder min./max.: 30 / 240 mm -Counterholder with guide bushes (clamping arbor and milling arbor)

Condition: good (used), Year of construction: 1977, workpiece dia. x mm control x table dimensions x mm weight of the machine ca. x t Dehxsul Egqszn Haekl dimensions of the machine ca. x m

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Dohxzstycg Son Haokl Year of construction: Approx. 1981

Condition: good (used), Year of construction: 1975, max. wheel diameter 400 mm gear width 290 mm max. module 6 min. module 0,5 weight 4,6 t total power requirement 17 kW Working area: Doheugawxexzn Haskl 1. largest module to be milled 6 mm 2. straight toothing a) Largest workpiece Ø 400 mm b) Largest length of toothing 290 mm 3. smallest number of teeth to be milled for 1-speed sub-gear 6 with 2-speed gearbox 3 Dimensions: 1. Ø of the workpiece table 400 mm 2. Ø of the table dimensions 80 mm 3. diameter of the workpiece mandrel 36 mm 4. largest clampable milling cutter: Ø diameter 160 mm Length 160 mm 5. diameter of the milling cutter arbour 32; 40 6. centre distance between milling cutter and workpiece a) Largest distance 300 mm b) Smallest distance 30 mm 7. drive cone for milling arbors MK 4 8. maximum milling cutter displacement: a) Tangential milling 120 mm b) Shifting 100 mm

Condition: good (used), x-travel 300 mm y-travel 340 mm z-travel 250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t Heidenh. 3 axes aktiv digital display Djhjucphxoxzn Haskl Year of construction unknown