Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, Available from Prototype Lab, equipped with: Colq Ajtxc Ndotp Rerb Elnik PLC Controller Windows OS Afterburner ACCU-Temp NEL H6 Hydrogen Generator MSA Gasgard XL Control Unit Elnik's MIM 3000 furnaces process any metal with any binder in a one step debinding and sintering cycle without having to move the parts. This is accomplished through a gas tight refractory metal retort with a gas management system. The gas management system consists of mass flow controllers for the retort and hot zone and a partial pressure valve at the specially designed and modified dry vacuum pump. Different flow of gases into the hot zone and retort and a slight partial pressure inside the retort guarantee that no binder materials stick to the cold walls of the furnace. Useable Retort Size: 16.5" x 18" x 24" Useable Volume: 116 Liters Total Square Area: 4,224 sq/in Pump Speed: 115 CFM

Condition: not inspected (used), Year of construction: 2025, operating hours: 5,000 h, Functionality: unexamined, machine/vehicle number: N/A, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 800 rpm, power: 5 kW (6.80 HP), Its a universal milling machine Crjlq Atpowdbnko Reb

Condition: excellent (used), Year of construction: 2018, EMAG VL 3 DUO CNC Twin Spindle, Vertical Turret Lathe Mfd. 2018 S/N 1100619, EMAG CNC control, (2) 12-station turrets, Chip conveyor, Full automation system Hennig system Hours: 4,684 Cslq Atju T Shvep Rjrb 2 Machines Available 110612, (2) w/Hennig Mdl. 102783 chip conveyor, full automation system, 4,684 and 7,401 hours.

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Celq Atpjvr Hf Ej Rsrb Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: used, total power requirement 1 kW Colq Aov Sdytetp Rsrb weight of the machine ca. 0,2 t dimensions of the machine ca. 620 x 720 x 400 mm m

Condition: new, Table size: 420 x 450 mm Table height: 215 mm Cslq Atpsc Snvfo Rerb Table swivels up to: 45 Saw or cutting blade Ø: 200 mm here cutting depth: 47 mm electrical connection: alternating current 230 V weight: 14,5 kg

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 655 mm, travel distance Z-axis: 750 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 D, workpiece diameter (max.): 700 mm, spindle speed (max.): 18,000 rpm, distance between spindles: 700 mm, number of spindles: 2, number of slots in tool magazine: 80, Two complete and one partial 5-Axis CNC high production flexible machining lines manufactured by Grob are available for negotiated sale. Each line has a Fanuc Robot "load-in" station where the part is introduced to the Grob integrated gantry system. The gantry system has two traveling arms for loading/unloading parts in to the (8) Grob G326 Dual Spindle 5-Axis CNC Machining Centers and (3) Sugino JCC-W6650TE Jet Clean Center CNC Washing and Deburring Machines. Parts are then removed and placed in dunnage by a Fanuc Robot "load-out" station. Line 1 (8) GROB G326 Dual Spindle 5-Axis CNC Horizontal Machining Centers (2018 - 2021): Siemens Sinumerik 840 D CNC Controls, (2) HSK-A63 18,000 rpm Spindles per Machine, (2) 80 Pocket ATC per Machine, Independent Z-Axis, Independent X-Axis, XV-Axis, Spindle/Tool Seating, Spindle No Load Monitoring, Gantry Top Door Loading, 600 mm X-Axis, 655 mm Y-Axis, 750 mm Z-Axis, 700 mm Distance Between Spindles, 2.3 Seconds Chip-to-Chip Time, 1070 kg Max Table Load Spindles Replaced 2022 Cslov Dydxsq Atp Rorb GROB SPC: Part Handling Transfer Station (2) SUGINO JCC-W6650 CNC Turret Type High Pressure Washing & Deburring Machine (2018): Fanuc Series Oi-MF Control, HP Water Deburring - Variable Up to 7,250 PSI, Sugino OEM Tri-Plex Plunger Pump, 0.08 mm Positioning, Turntable, 6-Tool Turret, 650 mm X-Axis, 500 mm Y-Axis, 500 mm Z-Axis, 48 m/min Rapid Feed, Multiple Filtration Options to 5-10 Microns (1) SUGINO JCC-VCD55SNE CNC Vacuum Dryer (2018): Fanuc Oi-MF Control, 5.5 kW Vacuum Drying Pump, Omron F3SJ Safety Light Curtain, Signal Tower (3-Layers), Ethernet I/P, 4-Axis (X,Y,Z,A), Manual Pulse Generator (2) FANUC Robots: R30iB Controller, Control Pendant, Safety Guarding GROB: Integrated Gantry System Line 2 (8) GROB G326 Dual Spindle 5-Axis CNC Horizontal Machining Centers (2018 - 2021): Siemens Sinumerik 840 D CNC Controls, (2) HSK-A63 18,000 rpm Spindles per Machine, (2) 80 Pocket ATC per Machine, Independent Z-Axis, Independent X-Axis, XV-Axis, Spindle/Tool Seating, Spindle No Load Monitoring, Gantry Top Door Loading, 600 mm X-Axis, 655 mm Y-Axis, 750 mm Z-Axis, 700 mm Distance Between Spindles, 2.3 Seconds Chip-to-Chip Time, 1070 kg Max Table Load GROB SPC: Part Handling Transfer Station (2) SUGINO JCC-W6650 CNC Turret Type High Pressure Washing & Deburring Machine (2018): Fanuc Series Oi-MF Control, HP Water Deburring - Variable Up to 7,250 PSI, Sugino OEM Tri-Plex Plunger Pump, 0.08 mm Positioning, Turntable, 6-Tool Turret, 650 mm X-Axis, 500 mm Y-Axis, 500 mm Z-Axis, 48 m/min Rapid Feed, Multiple Filtration Options to 5-10 Microns (1) SUGINO JCC-VCD55SNE CNC Vacuum Dryer (2018): Fanuc Oi-MF Control, 5.5 kW Vacuum Drying Pump, Omron F3SJ Safety Light Curtain, Signal Tower (3-Layers), Ethernet I/P, 4-Axis (X,Y,Z,A), Manual Pulse Generator (1) FANUC Robot: R30iB Controller, Control Pendant, Safety Guarding GROB: Integrated Gantry System Line 3 (4) GROB G326 Dual Spindle 5-Axis CNC Horizontal Machining Centers (2018 - 2022): Siemens Sinumerik 840 D CNC Controls, (2) HSK-A63 18,000 rpm Spindles per Machine, 80 Pocket ATC, Independent Z-Axis, Independent X-Axis, Spindle/Tool Seating, Spindle No Load Monitoring, Gantry Top Door Loading, 600 mm X-Axis, 655 mm Y-Axis, 750 mm Z-Axis, 700 mm Distance Between Spindles, 2.3 Seconds Chip-to-Chip Time, 1070 kg Max Table Load GROB: Integrated Gantry System

Condition: ready for operation (used), Year of construction: 2015, operating hours: 500 h, Functionality: fully functional, machine/vehicle number: N/A, feed length Z-axis: 200 mm, drilling capacity: 16 mm, type of input current: AC, control cabinet height: 1,800 mm, overall weight: 300 kg, spindle speed (max.): 1,000 rpm, power of the servo motor: 3,000 W, Its a multihaed special drilling machine Colq Atpswdbh Rs Rsrb

Condition: excellent (used), Year of construction: 1995, Euroturn (Mori-Say 8/32) Serial N°: 221-133-0083 Mfd. 1995 8 Spindles 32mm Capacity Equipped with : Stock Reel and Stand Crelq Aet E Udlstp Rjb - 1 Pick-up - 1 Shaving device - 8 Independent Slides - 3 Trolleys positions 2,7,8 - 1 Chip conveyor - 1 Exterior tank with magnetic separator - 1 Bar loader IEMCA PRA 40/33F (10ft) Located in Europe

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg Celqsvzln Re Atp Rjrb dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: used, Motor output 3 kW total power requirement 3 kw Cslsv Nq Sksq Atp Rjrb Weight 1.400 kg

Condition: used, machine/vehicle number: 0719, Mounting cone: MK 6 Core tip angle: 60 ° Load: 3000 daN Celqjdhwzfo Atp Rorb max.workpiece weight: 5000 daN Weight: 16 kg

Condition: ready for operation (used), Year of construction: 2000, drilling depth: 500 mm, overall weight: 3,500 kg, rotational speed (min.): 800 rpm, spindle motor power: 5,000 W, input voltage: 380 V, It is a 2 spindle deep drilling machine Crslq Aowdbf Njtp Rob

Year of construction: 2011, Condition: good (used), ZPS TMZ 867 CNC Multi-Spindle SN: V867A0040 Mfd. 2011 Siemens Control PRA 100F Type: 42  With Riedel Chiller Absolent Mist Collector High Pressure Coolant Filtration system Fire Suppression System Pickup Attachment IEMCA PRA 100 Bar Loader Stock Reel and Stand Slide Pos. 3:  X- Y- Z-Axes (with Motor) Crslqjk Nb Tgs Atp Rob Slide Pos. 5: X- Y- Z-Axes (With Motor) Slide Pos. 8: X- Y-Axes (to get proper center height)

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm Cjlqov Nw Npe Atp Rsrb diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Year of construction: 1994, Motor output 3 kW total power requirement 6 kw Crslq Aev Nq Sdstp Rob Weight 1800 kg

Condition: used, machine/vehicle number: 1109, Mounting cone: MK 6 Core tip angle: 60 ° Load: 3000 daN Cslsdhwzasq Atp Rerb max.workpiece weight: 5000 daN Weight: 16 kg

Condition: used, Year of construction: 1961, operating hours: 3,000 h, Functionality: unexamined, machine/vehicle number: NA, input voltage: 380 V, spindle speed (max.): 1,410 rpm, type of input current: AC, Machine with pantoraph Cjlq Aswda N Hstp Rsrb

Condition: good (used), Year of construction: 2000, Tornos SAS16.6 Multi-Spindle Mfd. 2000 6 Spindles Colq Atethnhysp Rorb 16.6mm Capacity Cleaned, inspected, and reconditioned Equipped as needed The attachments are not included

Condition: used, Year of construction: 1992, Motor output 3 kW Celq Atsv Nq R Tsp Rerb total power requirement 6 kw Weight 1800 kg

Condition: used, Mounting cone: MK 6 Core tip angle: 90 ° Load: 3000 daN max.workpiece weight: 6000 daN Cjlq Atpodhwy To Rjrb Weight: 16,9 kg

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, bar diameter: 22 mm, INDEX MS22-8,  Mfd. 2015 2 NCU Control: Siemens SINUMERIK 840D sl - 1 B Machine Control Panel with Flat Screen for C200-4D, 47 cm With IEMCA SIR Bar Feed (10ft) 1 Pickup Attachment - Bar diameter: 22mm - Spindle power: 15 kW - Spindle speed: 10,000 rpm Call for original build sheet. - Number of spindles: 8 - Bar diameter: 22mm - Spindle power: 15 kW - Spindle speed: 10,000 rpm - 1.1 Slide units: X and Z axes controlled by CNC - 1.2 slide units: X and Z axes controlled by CNC - 2.1 slide units: X and Z axes controlled by CNC - 2.2 slide units: X and Z axes controlled by CNC - 3.1 slide units: X and Z axes controlled by CNC - 3.2 slide units: X and Z axes controlled by CNC - 4.1 slide units: X and Z axes controlled by CNC - 4.2 slide units: X and Z axes controlled by CNC - 5.1 slide units: X and Z axes controlled by CNC - 5.2 slide units: X and Z axes controlled by CNC - 6.1 Slide units: X and Z axes controlled by CNC - 6.2 slide units: X and Z axes controlled by CNC - 7.1 Slide units: X and Z axes controlled by CNC Cjlstp Uz Ujq Atp Rsrb - 7.2 slide units: X and Z axes controlled by CNC - 8.1 slide units: CNC-controlled swivel axes and Z-axes - 8.2 slide units: X and Z axis controlled by CNC

Condition: good (used), Year of construction: 1980, Davenport Model B 3/4" Mfd. in 1980s Pickoff / Back Finish Threading Stock Reel and Stand Chip Conveyor Cjlq Aoh I Euaotp Rsrb Noise Tamer Sound Enclosure Refurbished and Ready to Run Several similar machines available

Condition: good (used), Year of construction: 2016, machine/vehicle number: 30339, Wickman 6-57 CNC Multi-Spindle Screw Machine SN: 30339 Mfd. 2016 Siemens CNC control Motors and controls Stock stand and stock reel with enclosure (2) 2-Axis CNC Slides in Pos. 4 and 5 Colq Atsuzlltsp Rjrb Single Axis CNC Turret Single Axis CNC Auxiliary slides pos. 4th + 5th Turbo Chip Conveyor Machine configured as follows Pos. 1: Mechanical cross slide, Turret open Pos. 2: Mechanical cross slide, Turret open Pos. 3: Mechanical cross slide, Turret open Pos. 4: 2-Axis CNC Slide, Auxiliary single Axis Pos. 5: 2-Axis CNC Slide, Auxiliary single Axis Pos. 6: Mechanical cross slide, programable pick-up turret is single axis CNC With (6) Collet tubes Sold as-is where-is condition from current location. Buyer is responsible for shipping and rigging.

Condition: good (used), Year of construction: 2006, INDEX MS52C CNC Multi-Spindle Mfd. 2006 Control: Siemens 840D 6 Spindles 52mm Capacity Equipped as pictured Under power Knoll System Chip Conveyor Riedel Chiller 3.6 meter (12ft) IEMCA SIR Bar Feed SIR MS52/F Type 38 XL Mfd. 2005 Cjlot Rkzweq Atp Rorb