Year of construction: 2011, Condition: excellent (used), 1 used measuring and marking plate Year 2011 Dimension 7000 x 2000 mm Fjlohu Rtmsim Dcnegb height 300 mm Weight 9,6 to There are two plates which can be sold separately can be sold separately

Condition: good (used), CN 2260 HYDRAULIC SYNCHRO PRESS BRAKE Folijugr R Dsm Dcnsgb Force 2200KN Bending length 6120mm Distance between uprights 5100mm Slide table distance 525mm - Gooseneck depth 400mm - Stroke 275mm Electric motor power 18.5kw (10mm² section, 380V 50amp fuse disconnector) Overall dimensions 6240 x 2340 x 3425mm - Weight 25000kg

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 285827, MACHINE SPECIFICATION Maximum swing 530mm Swing over cross slide 530mm Maximum machining diameter (upper turret) 500mm Bar work capability main spindle 51mm Bar work capability secondary spindle 51mm Maximum machining length 854mm Maximum support weight main spindle chuck work 150Kg Maximum support weight main spindle shaft work 150Kg Main Spindle Rotating speed maximum 6000 min-1 Rotating speed minimum 35 min-1 Acceleration and deceleration time 4.0 s Through hole diameter 61mm Motor output (continuous rating) 7.5kW   Fgslim Dowhx I Aocnsb MACHINE SPECIFICATION Cont’d Secondary Spindle Rotating speed maximum 6000 min-1 Rotating speed minimum 35 min-1 Milling head Type Single Spindle with ATC unit Tool shank type CAPTO C6 Tool size (OD turning) 20mm Tool size (ID turning) 32mm Tool size (milling tool max. diameter) 130mm Tool size (milling tool max. diameter) 250mm 90° indexing time 0.5 s Feed Axes Rapid feed rate X 40000mm/min Rapid feed rate Z 40000mm/min Rapid feed rate Y 40000mm/min Rapid feed rate W 30000mm/min Movement stroke X 450mm Movement stroke Z 904mm Movement stroke Y 210mm Movement stroke W 903mm Others Coolant tank capacity 210L Power requirements (continuous) 36.71 kVA Air pressure 0.5 Total air capacity 230 I/min Machine dimensions Height of centers 1250mm Length (excluding feed and swarf management system) 2495mm Width (excluding Rotac Rack unloading system) 3030mm Height 2500mm Weight 10,400Kg Auto tool changer & magazine Type of tool magazine 36 MACHINE SPECIFICATION Cont’d Maximum tool diameter (with adjacent tool) 90mm Maximum tool diameter (no adjacent too) 130mm Maximum tool weight 5Kg Maximum tool length 250mm GENERAL MACHINE OPTIONS AS092 Automatic power on/off and warm up AS250 ATC auto recovery CO032 Chuck airblast (2nd spindle) BY NC command EL110 Power transformer for European market MM007 Number display magazine panel (n/a with tool ID) MO555 Coolers for ball screw (XZ axis) MO575 Roller guide NO823 USB interface (1 port) SD116 Intelligent performance spindle A SD120 One set of adjusting tools SD130 Foundation kit (plates) SI039 C axis 0.0001° increments

Condition: ready for operation (used), Year of construction: 1978, machine/vehicle number: 32392, table mounting size: 560 x 240 mm x-axis: 300 mm y-axis: 275 mm z-axis: 200 mm spindle retainer: ISO 40 spindle rotations: 40 - 2000 rpm operating voltage: 380 V total energy requirement: 1,5 kW space needed: 1200 x 1100 x 1700 mm weight: ca. 750 kg Fgolim Dcsd Tfcijnjb

Condition: good (used), Year of construction: 1998, pressure 50 t chamfer lenght 1250 mm distance between columns 1070 mm Stroke beam 100 mm max. opening beam/table 370 mm C-recess 300 mm max travel X-axes 400 mm R1 and R2 axis controlled by cnc 100 mm Z1+Z2 axes controlled by cnc manuell mm Feliowgllrjm Dcnsgb Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 50000 h length 1600 mm width 1500 mm height 2000 mm weight 2600 kg total power requirement 2,5 kW dimensions of the machine ca. 2x2x2 m weight of the machine ca. 2,56 t All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: used, Functionality: fully functional, General overhaul 2007 Operating hours since overhaul: 1,001 hours Control: Siemens touch panel with TIBO drilling program (simple version - Siemens TP 177 A with Siemens S7-200 PLC) Drilling method: Single-lip drilling Number of spindles: 1 Solid drilling: Ø 4.0 - Ø 35.0 (Max. !!!) Nominal drill depth: 500 mm Maximum drill depth: 737 mm Maximum drill length: 1,100 mm Drill diameter: Rotationally symmetrical parts: Ø 10 - Ø 136 mm Maximum workpiece length: 650 mm Spindle drive: 7.5 kW Speed range: 100 - 4,000 rpm Working feed: 35 - 320 mm /min Rapid traverse: 3500 mm /min Fgolim Dowf Dv Hjcnsb Coolant system: Capacity: 1000 liters. High-pressure pump: 5 - 91 liters /min Paper belt filter Chip conveyor - permanent magnetic Air cooler (unused because only aluminum was processed)

Condition: good (used), 1 used universal tool milling machine make Deckel type FP 1 year 82 Technical data: x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm Spindle holder SK 40 Fgslimern I Rzj Dcnjb Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6x1.3x1.8 m

Condition: good (used), Four-jaw chuck, four-jaw lathe chuck -Chuck size: Ø 250 mm -Bolt circle: Ø 230 mm -Recess:Ø 210 mm -Passage: Ø 80 mm Fjlimjdrwmkj Dcnsgb -Scope of delivery: as per pictures, without additional jaws -Weight: 19 kg

Condition: good (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: D-017/99, This machine is an oil-hydraulic, column-type downstroke press. It is equipped with two main pistons to control the synchronous operation. Felim Dcjwglkuonsgb Application: Test pressing of cutting, punching, bending, and drawing tools

Year of construction: 2010, Condition: used, . Fslim Dcewgi Nujnegb ja

Condition: used, Year of construction: 2000, pressure 170 t chamfer lenght 4100 mm distance between columns 3750 mm Stroke beam 215 mm 380 mm Fslim Dswglllecnsgb 350 mm Quick speed,inspeed 120 mm/sec bendingspeed 0-10 mm/sec opening speed 120 mm/sec X-axes 600 mm 200 mm Z1+Z2 axes controlled by cnc 0.-3600 mm Number of working hours 29150 h length 4800 mm width 2200 mm height 2650 mm weight 16450 kg total power requirement 25 kW weight of the machine ca. 16,5 t dimensions of the machine ca. 5x2,5x3 m

Condition: used, Year of construction: 2003, operating hours: 38,499 h, Functionality: fully functional, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, type of input current: AC, With chip conveyor, left-side ejection, hinged belt design Fgsliewf Duvjm Dcneb Operating hours: 38,499 Mazatrol 640M control system Tool magazine for 48 tools Work table Table size (clamping surface): 760 x 2,000 mm Table load: max. 1,400 kg Table configuration: 5 x 18 mm T-slots, 125 mm spacing Reference T-slot: 18 mm H in the table center Table height from floor: 875 mm Travel ranges Travel path: X-axis 1,740 mm Y-axis 760 mm Z-axis 660 mm Rapid traverse speed: X-axis 36 m/min Y-axis 36 m/min Z-axis 36 m/min Feed rate 1 - 8,000 mm/min Distance from spindle nose to table 180 - 840 mm Distance from the front of the column to the spindle center: 830 mm Work spindle speed range (infinitely variable) 40 - 12,000 rpm Steep taper chuck: CAT 40 Main drive power, AC motor: 18.5 / 11 / 7.5 kW Torque: max. 98 Nm Cutting performance (test results) Milling performance C 45 approx. 416 cc/min Drilling performance C 45 Ø 25 mm Tapping performance C 45 M 24 x 3 * Machining performance depends on the condition of the workpiece, the tooling, and the clamping device. Coolant system Tank capacity: 365 l Flood cooling: Pump flow rate approx. 24 l/min Pump pressure: approx. 5 bar - Air blower on the spindle - High-pressure cooling through the spindle, pressure approx. 15 bar - Preparation for Mazak Monitoring System B, optical type touch probe MP-12 - 2 additional M-function sets (2 M-functions per set) Partition for reciprocating machining - Renihaw measuring system NC-1 Mazak Monitoring System B, optical type touch probe MP-12 CNC "Performance" option package 15 wipers (scrapers) No.: J09KXSW10S0

Condition: used, Year of construction: 1995, pressure 80.0 t chamfer lenght 2050 mm distance between columns 1550 mm column arm 250 mm table width 85.0 / 135 mm stroke ca. 390 mm dayligth ca. 585 mm ajustment speed 180 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec work height max. 1050 mm Number of working hours 32.495 h oil volume 200 l operating pressure 320 bar total power requirement 11.6 KW weight of the machine ca. 7300 kg range L-W-H 3700 x 2000 x 3000 mm Good/well-maintained condition (!!) - in checked conditions - machinevideo - ?v=IKyUmzB0WTI Fgjlimswfttzj Dcnjb ----- CNC electro-hydraulic press brake with: * Increased installation height .. approx. 550 mm * Increased cylinder stroke .. approx. 390 mm ----- Features: - Robust electro-hydraulic press brake * MADE IN GERMANY (!!) - CYBELEC CNC control "DNC 904 PS-A" (SN 0332) * Pivoting, front right * High-resolution graphic display * Clear, easy-to-read menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bending sequence calculation - CNC-controlled axis adjustment: Y1+Y2 / X / R axes - CNC electro-motorized backgauge (X axis) * With 4 manually adjustable stop fingers - CNC Electric height adjustment (R axis) - WEINBRENNER electro-hydraulic upper tool clamp - WEINBRENNER electro-hydraulic lower tool clamp - 1x freely movable 2-hand/foot control - 2x front, movable support arms - Side safety device (swinging doors) - Rear safety device (swinging doors) - Machine/control manual + circuit diagram

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand HEIDENHAIN Fgjlswh A Nkeim Dcnjb Main Drive Spindle speed range 10000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 1600 mm Y-Axis Movement 810 mm Z-Axis Movement 700 mm Media Chip conveyor Yes Additional Equipment Accessories: Chip conveyor This 3-axis SPINNER MVC 1600-N was manufactured in 2016. Ideal for precision machining, this vertical machining centre ensures reliable performance and durability. Consider the opportunity to buy this SPINNER MVC 1600-N vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 1999, weight max. 15 / 30 (einzeln/Set) t workpiece diameter 600 - 6000 mm gear diameter 520 mm Rotating speeds 130-1300 mm/min voltage 400 V total power requirement 2 x 1,1 kW Fgjlswf Rhijim Dcnjb weight of the machine ca. 1200 kg + 800 kg kg Serial No. 2953 Drive and idle unit equipped with rail rollers (can be dismantled if not required) Units are not from same original set and differ in height. Height floor - center of turning rolls 670/750 mm (Idle unit / drive unit)

Condition: used, Year of construction: 1992, serial number 31302 control Fanuc with double spindles x turning diameter max. 600 mm x-travel 1000 mm with magazine x extensive accessories ca. 100 Aufnahmen, auch angetrieben weight of the machine ca. 13 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Fgslohn T D Isim Dcneb +++++

Condition: good (used), Year of construction: 2006, Technical Specifications – QTN-250M (Turning Length 1000 mm) Chuck Size: 10 inches Maximum Swing: 677.5 mm Standard Turning Diameter: 430 mm Maximum Machining Diameter: 633 mm Maximum Machining Capacity: 677 mm Maximum Turning Length (Z-Axis): 1000 mm Bar Capacity: 77 mm Spindle Nose: A2-8 Main Spindle Speed: 30–4000 rpm Main Spindle Motor Power (30-minute Output): 25 kW (36 HP) Maximum Main Spindle Torque: 355 Nm (36.0 kgf m) Fgelim Dswfynfscnjb Tailstock: • Quill Type: Morse Taper No. 5 • Maximum Tailstock Travel: 1050 mm • Maximum Thrust: 12 kN (1200 kgf) Tool turret: • 12 tool positions • Tool sizes: • External turning tool: Ø40 mm • Internal turning tool: Ø20 mm • Milling drill: Ø20 mm • Milling tap: M12 Milling spindle: • Speed: 25–4500 rpm (optional 6000 rpm) • Motor power: 5.5 kW (7.5 HP) • Maximum torque: 35 Nm (3.6 kgf m) Coolant volume: 160 liters Machine dimensions: • Width: 1780 mm • Total height: 2533 mm • Space required: approx. 4.51 m² • Machine weight: approx. 5200 kg 1x chip conveyor 1x tray Pictures coming soon

Condition: reconditioned (used), Year of construction: 2015, SEEDTEC YSG-618 TS Surface Grinding Machine With 1-axis NC system ST-2 control Year of manufacture: 2015 Grinding area: 465 mm x 150 mm Fjlimjwgmy Ro Dcnsgb With the following accessories: Magnetic clamping plate 350 mm x 160 mm Electronic handwheel Paper belt filter system Machine light 5 machine mounts

Condition: good (used), Year of construction: 1961, Heavy-duty lathe, turning machine, lathe, center lathe, center lathe Foljwfpileim Dcnjgb -Machine bed: in very good condition -Manufacturer: Martin, lead screw lathe type DLZ 502 -Turning length: 2200 mm -Turning Ø over bed: 580 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x steady rests, tool holder, tools see photos -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg

Condition: ready for operation (used), Year of construction: 2002, General Data Machine weight 9000kg Control Unit Brand SELCA Model S4045PD Main Drive Spindle speed range 20000 RPM Movement X-Axis Movement 1052 Y-Axis Movement 520 Z-Axis Movement 520 This C.B. Ferrari B18 was manufactured in 2002. It is a vertical machining center that has been well-maintained and is ready for immediate use. Consider the opportunity to buy this C.B. Ferrari B18 vertical machining center. Contact us for more information. Application Types Milling Folim Dewh A R Iscnjgb

Condition: used, Year of construction: 1996, Bridgeport VMC 760/22 Vertical Machining Centre with Heidenhain TNC 370 Control, 3 Axis, 22 Tool ATC, 1000 x 500mm Bed, Airbench Oil Mist Filter System. S/No. 21108 (1996) Felim Dcjwhpbgsnogb Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2005, operating hours: 1,000 h, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 401, This machine has got very little use as it was used as a backup saw. It has been taken out of the production line as we needed the space for a new Schirmer machining center. This Rapid DGL functions as new and is ready for shipment if sold. We have the necessary equipment required to load onto a truck if required. Foliewgygwom Dcnsgb

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand FANUC Model §==I Main Drive Number of axis 5 Foliowgp Siom Dcnsgb Table Number of tslots 7 Inner width 14 mm Table load 800 kg This 5-axis HAUSER KELLENBERGER H55-400 was manufactured in 2019, designed for precision internal grinding. Ideal for complex geometries, it offers advanced control for high accuracy. Consider the opportunity to buy this HAUSER KELLENBERGER H55-400 internal grinding machine. Contact us for more information. Application Types Grinding

Condition: used, Star SR-20 Type 530G Sliding Head CNC Lathe with Fanuc 16T Control, 5 Axis, Twin Spindle, 6 Turning Tool Bays, 3 End Collet Bays, 3 Side Collet Bays, 3 End Boring Bays, Serial No. 010804, FMB Turbo 3 - 26 Bar Feed, Max Bar Length 3800mm Country of Origin: Japan Folim Dcswhpaijnjgb Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2007, Star SR-20RIII Type 680 Sliding Head CNC Lathe with Fanuc 300iS Control, 5 Axis, Twin Spindle, 14 Turning Tool Bays, 4 End Collet Bays, 4 End Collet Bays, 5 Side Collet Bays, Nobec Fire Suppression System. S/No. 0119 (008) (2007) Run Time - 14998H42M95, FMB Turbo 3 - 36 Barfeed, 3200mm Max Work Piece Length. S/No. 41-260-479/R 565589. Star G42000 High Pressure Coolant System. S/No. 222 (2007) Country of Origin: Japan Fgolim Dowhn Uxscnob Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.