Used Other metal presses for sale (190)

Condition: used, TECHNICAL DETAILS - pressure : 4 [t] - number of supports : 2 Cgsbouhahgo Enim Aet - fixed table dimensions : 210 x 210 [mm] - fixed press assembly - hole Ø in table : 80 [mm] - number of strokes in sharpening / cutting : 50 - 150 [c/min] - adjustable slide : 40 [mm] - fixed travel : 27 [mm] - max. height for tooling : 148 [mm] - longitudinal clearance between supports : 230 [mm] - max. part diameter in sharpening : 30 [mm] - max. part thickness in sharpening / cutting : 1.5 / 2 [mm] - voltage : 380 [V] - installed power : 1.5 [kW] - floor space : 1100 x 1100 x 1650 [mm] - weight : 500 [kg]

Year of construction: 1980, Condition: used, 4 table size 4600-2200 mm stroke 850 mm Ceb Ensud Tn Ssim Ajgt

Condition: ready for operation (used), An old Metalwag manual spindle press is available. Pressing force: 10000kg, stand distance: 320mm, stroke: 120mm, balancing diameter: 1200mm, table dimensions X/Y: 300mm/300mm, machine dimensions X/Y/Z: approx. 1200mm/1200mm/1700mm, weight: approx. 250kg. On-site inspection is possible. Cgjb Enjvyr Izsim Aot

Year of construction: 1989, Condition: ready for operation (used), Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible. Csb Eevyirkjnim Aogt

Year of construction: 1981, Condition: ready for operation (used), Press force: 600kN, accuracy: 0.1mm, stroke rate: 300 strokes/min, feed: 150mm, clamping plate dimensions X/Y: 650mm/420mm, opening dimensions X/Y: 550mm/120mm, tool installation height min./max.: 190mm/350mm, weight: approx. 8000kg. Without coil and straightening unit. In continuous operation, the machine switches off after 1-2 strokes. Documentation available. On-site inspection is possible. Cebevyip Ne Enim Ajgt

Year of construction: 1992, Condition: ready for operation (used), A Bruderer differential stroke press (knuckle-joint press) is available. Press force: 3200kN, installation height min./max.: 420mm/520mm, clamping table dimensions X/Y/Z: 1400mm/1000mm/150mm, table height: 1030mm, ram dimensions X/Y: 1000mm/800mm, belt passage width and height: 400mm/450mm, machine dimensions X/Y/Z: approx. 2350mm/1850mm/4550mm. Documentation available. On-site inspection is possible. Cgob Enjvdu Nvjim Aet

Year of construction: 1992, Condition: ready for operation (used), Press force: 1000kN, rapid traverse force: 100kN, retraction force: 100kN, overrun time: 0.053s, power: 18.5kW, table dimensions X/Y: approx. 1000mm/800mm, clearance: 600mm, max. stroke without tool: 420mm, external control: Provit, machine dimensions X/Y/Z: approx. Stroke without tool: 420mm, external control: Provit, machine dimensions X/Y/Z: approx. 1800mm/2200mm/3700mm, control panel dimensions X/Y/Z: approx. 800mm/800mm/1600mm, external control cabinet dimensions: approx. 1600mm/500mm/1200mm. Without feed unit. On-site inspection is possible. Cgeb Enimsvriqdj Ajt

Condition: ready for operation (used), Pressing force: 130t, max. wire diameter: 17mm, cutting length: 150mm, ejector stroke matrix: 125mm, ejector stroke stamp: 58mm. WZ dimensions length/diameter: blade: 80mm/50mm, die: 180mm/90mm, punch: 195mm/75mm. Weight without housing: 27t. Available from 26.08.2024. Cjb Enior I Abiom Aogt

Year of construction: 1992, Condition: ready for operation (used), Compressive force: 1000kN/100t, lifting speed: 25/min, ram stroke: 230mm, power requirement: 5.5kW, safety distance: 640mm, stopping time: 400ms, weight: 4600kg. Has been overhauled once. Cgsb Enetk Nx Eeim Aot

Year of construction: 2018, Condition: ready for operation (used), A Mäder direct-acting compressed air press is available. Pressing force at 6bar: 56kN, max. stroke length: 80mm, compressed air input min./max.: 3.2bar-6bar, max. tool dimensions X/Y: 310mm/220mm, max. tool weight: 14kg, total stopping time: 0.1s. Projection of press head/press frame: 150mm/300mm, working height: 195mm-290mm, table dimensions X/Y: 190mm/190mm, operating hours: 59h. Pressure cell included. Documentation available. On-site inspection is possible. Cgjb Eniju St Idom Ast

Year of construction: 1986, Condition: ready for operation (used), Press force: 315t, stroke: 600mm, table dimensions X/Y: 2000mm/1200mm, ram area X/Y: 2000mm/1200mm, rapid stroke: 450mm/s, working speed range: 14mm-40mm/s, retraction speed: 300mm/s, table height: 900mm, oil volume: 2000l. Dimensions X/Y/Z: approx. 5000mm/3200mm/5000mm, weight: approx. 45000kg. A retrofit was carried out in 2016. Documentation available. On-site inspection is possible. Available from October 2024. Cjb Enist Hkiaem Asgt

Year of construction: 1971, Condition: ready for operation (used), Pressing force: 10MP, stroke rate: 120/min, ram stroke adjustment: 5mm-55mm, bar length: 40mm, weight: approx. 1200kg. Csb Enistz Dldem Ajgt

Condition: ready for operation (used), Pressing force: 10t, oil filling: 300l, max. pressure: 20bar, press type: C-column press, machine dimensions X/Y/Z: approx. 1250mm/1200mm/3000mm. On-site inspection is possible. Cob Enijt Uhz Nsm Ajgt

Year of construction: 1998, Condition: ready for operation (used), Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible. Cjb Eniettbd Tsm Ajgt

Year of construction: 1988, Condition: ready for operation (used), Three older eccentric presses from various manufacturers are available. The presses were only used sporadically for punching cycle holes in plastic sheets (approx. 350mm/350mm/0.4mm). 1) W. Paul Müller, ExP 25, year of manufacture: 1970, pressure capacity: 25t, throat depth: 190mm, strokes: 120/min, slide adjustment: 50mm, stroke adjustment: 0mm-60mm, motor power: 2hp. 2) L. Schuler PE 25/250, year of construction: 1988, throat depth: 250mm, table dimensions X/Y: 500mm/465mm, ram dimensions X/Y: 180mm/200mm, stroke adjustment: 8mm-60mm, ram adjustment: 50mm, motor power: approx. 1.4kW, weight: approx. 1600kg. 3) Eisenwerk Hensel, compressive force: 25t, stroke adjustment: 72mm. Documentation available. On-site inspection is possible. Individual sale not possible. Cgobeu Nlk Eo Enim Ajt

Condition: ready for operation (used), Pressing force: 750kN, throat depth: 300mm, stroke adjustment: 16mm-140mm, ram adjustment: 80mm, stroke rate: 105/min, motor power: 4kW, table dimensions X/Y: 800mm/600mm, table height: 845mm, machine dimensions X/Y/Z: approx. 1700mm/1200mm/2500mm, weight: approx. 4200kg. The machine has had a crack for years, but this does not affect the stability or the UVV test. Documentation available. On-site inspection is possible. Cgebsu N Hdts Enim Ajt

Year of construction: 1998, Condition: ready for operation (used), Number of levels: 4, pressure beam: 4/level, hold-down device: 4/level, pressing length: 2000mm, pressing width: 1040mm, max. workpiece thickness: 80mm, total pressing pressure: 12t, effective depth: approx. 980mm, distance between outer edge uprights and outer edge uprights: 1940mm, machine dimensions X/Y/Z: approx. 2400mm/1700mm/2100mm. On-site inspection is possible. Csb Enijvtqr Som Asgt

Year of construction: 2011, Condition: ready for operation (used), Two heated hydraulic presses are available. 1) Italpresse GL9-6/188, year of manufacture: 2011, press force: 300t, spec. press force: 43kg/cm², cylinder: 6, cylinder diameter: 140mm, table dimensions X/Y: 1400mm/600mm, opening height: 400mm, heating plates: electric, drive power: 5.5kW. 2) Joos HP S80, year of manufacture: 2011, pressing force: 80t, plate dimensions X/Y: 2500mm/1250mm, piston diameter: 80mm, operating pressure: approx. 385bar, spec. pressing force: 2.5daN/cm², cylinders: 4, heating: electric, machine dimensions X/Y/Z: approx. 2900mm/1500mm/2100mm, weight: approx. 3300kg. On-site inspection is possible. Cgjb Enjugmxpjim Aet

Condition: ready for operation (used), Pressing force: 1250kN, stroke rate: 55/min, max. switching frequency: 50/min, ram stroke: 8mm-120mm, ram adjustment: 80mm, power: 7.5kW, safety clearance: 340mm, weight: approx. 8700kg. The machine has a hairline crack on the main shaft. On-site inspection is possible. Ceb Enimsukh Alj Aogt

Year of construction: 2002, Condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Ceb Ensum U Sxjim Ajgt

Condition: ready for operation (used), Pressing force: 630kN, speed up/down: 63/380mm/s, ram stroke: 500mm, throat depth: 360mm, max. table-ram distance: 800mm, ejector force/deep drawing force: 250kN, max. drawing depth: 200mm, ejector stroke: 140mm, weight: approx. 4000kg. Cjb Eetxbz Esnim Asgt

Year of construction: 1995, Condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Cgeb Enstva Dnsim Aet

Condition: ready for operation (used), Stroke rate: 250/min, press force: 250kN, stroke: 16mm. Including press with 2 slides, reel, welding device with cooling unit and automatic nut feeder. Documentation available. On-site inspection is possible. Cgjb Eju Av D Nonim Aot

Year of construction: 2018, Condition: ready for operation (used), A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible. Cgjb Ensu Dal Hoim Ast

Year of construction: 1977, Condition: ready for operation (used), Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg. Cebst Nhmho Enim Aogt