Used other lathes for sale (250)

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 8531, Auction of a Famot MEXPOL TUM 35! Dsdpfxsx Ngnmo Afnjcc

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 120mm, turning length: 400mm, travel X/Z: 400mm/400mm, spindle bore: 42mm, speed: 8000rpm, chuck diameter: 150mm, tool stations: 12, tool interface: VDI 20. Machine dimensions X/Y/Z: approx. 2500mm/1400mm/1700mm, weight: approx. 2500kg. Documentation available. On-site inspection is possible. Dcodjx S Rbiepfx Afnjc

Year of construction: 1980, condition: excellent (used), Widht: 1000-1676 mm Axis lenght: 1327-2700 mm Diameter of the wheels: 460-1120 mm Axle diameter: 70-200 XAD 112, more information on request Dcedpfsnbfcrjx Afnoc

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm Dcedek Dz N Ispfx Afnsc max turning diam 1100mm range of turning diam 460-1250mm

Year of construction: 2014, condition: ready for operation (used), A lightly used Hyundai CNC turning machine is available. Turning diameter: 560mm, turning length: 2100mm, main spindle power: 30kW, spindle speed: 2000rpm, tool turret: Hyundai BMT 75, tool stations: 12, tool holders: 8, coolant pressure: 20bar. Machine dimensions X/Y/Z: approx. 3750mm/2250mm/2300mm, weight: approx. 9000kg, control: Fanuc 32i, operating hours: 230h, power-on hours: approx. 1450h. Including tool measurement, power chuck Samchully HCH-15 (381mm), 6 sets of soft jaws, 1 set of hard jaws, steady rest SMV SLU-B and hinge belt conveyor. Documentation available. On-site inspection is possible. Djdpfx Asx Sywyjfnocc

Condition: used, Year of construction: 1985, railwidht: from 1430mm - 1520mm diameter range: ø700 to ø1120mm Dcodpfxowzg Tgs Afnsc

Year of construction: 1997, condition: like new (used), UNDER FLOOR WHEEL LATHE RAFAMET UGB 150 Underground lathe for reprofiling train wheels without necessary disassembly Dcjdpfx Afog R Syhsnjc Truck guage: 1435 mm Range of wheel tread diameters: 600 to 1,500 mm Maximum axle load: 250 kN Minimum wheel base: 1,700 mm Machine is from 1997 Dismantled, ready for shipment.

Year of construction: 2002, condition: excellent (used), More information on request Dodpfxoghg H Es Afnocc

Condition: good (used), Working diameter Ø 2400mm Dcjdpfx Ajucdh Tofnec Max sheet thickness: 9,5 mm

Condition: excellent (used), Polish production Rafamet lathe for sale, efficient machine in good condition after employing electrics and management by Rafamet. The machine worked until the very end, currently disassembled loading machine. Technical data Track width (for normal version) - 1435 mm Track width (for special execution) - 1524 or 1676 mm Wheel diameter - 800-1500 mm The minimum distance between the axes of the sets - 1500 mm Maximum axle clamping on the rails - 25 tons Rotation of drive rollers (stepless) - 15-82 rpm Dcsdpfx Asmidwcefnsc Circumferential speed of drive rollers - 7.5-43 mm/min Feeds of copying supports (stepless) - 0.95-34 mm / min Travel of external jacks - 540 mm/min Travel of hydraulic jacks - 410 mm/min Slide travel - 2300 mm/min Sliding rail travel - 9000 mm/min Weight including standard equipment 25 200 kg Installed power 83kW (after modernization 58kW)

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Dcodpfxjhvml Ie Afnec Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg

Year of construction: 1990, condition: ready for operation (used), A CNC lathe Gildemeister is available. Swing diameter over bed/face slide: 600mm/360mm, bed dimensions X/Y: 350mm/450mm, carriage length: 620mm, carriage width: 250mm, facing travel: 1100mm, chuck diameter: 315mm, spindle bore: 107mm, spindle diameter: 140mm, spindle power: 30kW, torque: 950Nm, speed: 3150rpm, rapid traverse X/Z: 10m/min/5m/min. Quill diameter: 100mm, quill stroke: 180mm, max. tailstock pressure: 1200daN, turning length: 1000mm. Machine dimensions X/Y/Z: approx. 4350mm/2050mm/2000mm, weight: approx. 6400kg, operating hours: 49811h. Documentation available. An on-site inspection is possible. Dodjx R Duaspfx Afnecc

Condition: excellent (used), Available: Immediately Djdpfepr Uu Usx Afnscc

Condition: excellent (used), Year of construction: 2024, operating hours: 314 h, functionality: fully functional, machine/vehicle number: LL393806057, total length: 8,470 mm, total width: 3,050 mm, total height: 2,370 mm, overall weight: 20,500 kg, Axe & Status Tuscan LL550 X 6000 5-Bedway Heavy Duty Lathe With Fanuc Series 0i-TF Plus CNC Control Dcsdpsx Ivzmjfx Afnec Running Time 314 Hours. Swing Over Bed Ø950mm. Centre Height Approx 575mm. Distance Between Centres Approx 6,000mm. Carriage Type Box (2 Box Way), Carriage Width Approx 955mm, Cross Slide Width Approx 450mm, Bed Width 990mm. Axis Travel 'X'=480mm, 'Z'=6,000mm. Feed Rate 'X'=0-3,000mm/min, 'Z'=0-3,000mm/min. (2) 'FCG-32C' Ø800mm x Ø320mm Through Bore 4-Jaw Manual Chucks (Front & Back of Spindle). (2) SMW Autoblok 'K4 ZSW' Programmable Steadies, Range Ø52mm - 280mm. Headstock Spindle Nose A2-20. Spindle Bore Ø305mm. Spindle 'X' Axis Servo Motor 3kW, 'Z' Axis Servo Motor 7kW. Spindle Speeds 7-400rpm (Motor 30/37kW), Morse Taper 6. V12-200 Hydraulic 12 Station Turret, 32mm Tool Size, Ø50mm Boring Bar Holder Dimension. Motorised Tailstock Body Movement, Quill Ø165mm, Quill Travel 250mm, MT 6. S/No LL393806057 (2024). Electrical Specification AC220V/50Hz, 3 Phase. Automatic Doors & Full Cover Guard, Motorised Fondex Front & Rear Chip Conveyors, Auto Lubrication & 15-Bar Coolant System, Air Conditioned Electric Cabinet, Halogen Work Lights, Unimag DS-2030-30 Disc Type Oil Skimmer, Yong Teng E04-AL60 kVA Transformer, Plus: (2) Steel Cabinets: (1) 500mm x 500mm x 800mm With 6 Drawers & (1) 1,000mm x 700mm x 1,000mm With 6 Drawers, Full Range Of Machine Manuals, Ø800mm 4-Jaw Manual Chuck (Already Described In Original Detail) With Backing Plate & Spare Jaws, (11) Assorted C6 Capto Adaptors Including Boring Bar Holders, Tool Blocks & Facing Tool Holder,; Boring Bar Attachment (To Hold up to 150mm). Overall Dimensions Approx 8,470mm x 3,050mm x 2,370mm High; Weight Approx 20,500kg.

Year of construction: 1978, condition: used, Article: Programme-controlled automatic lathe Manufacturer: Traub Type: TF60 / 140 Yob: 1978 Bar automat Please, contact us for getting more information and pictures on mail(at) or Dcjdpfx Afol Rmqtonsc *

Condition: ready for operation (used), functionality: fully functional, Weiler Commodor in good working condition. Specifications: Swing diameter over bed: 380 mm Swing diameter over cross slide: 190 mm Distance between centers: 1000 mm Spindle bore: 56 mm Speed: 25–2000 rpm Motor power: 4 kW Machine equipped with: 3-axis digital readout Dcedpfx Afsx Ngpdjnsc 3-jaw chuck with multiple jaws Coolant system Multifix quick-change tool post with 4 holders Collet system with collets Bed stop

Condition: used, Year of construction: 2004, ECOCA SJ20MC 3 AXIS CNC TURNING CENTRE MAKE ECOCA, MADE IN TAIWAN MODEL SJ 20MC YEAR 2004 CONTROL FANUC 18-T MAX. TURNING DIA 170.0 mm MAX. TURNING LENGTH 300.0 mm SWING OVER BED 380.0 mm Dodpfx Aotvav Ijfnecc OVER CROSS SLIDE 225 MAX. SPINDLE SPEED 4,500 RPM POWER TOOL SPEED 4000 SPINDLE NOSE A-5 / A2-6 DRAW TUBE DIA 45 RAPID TRAVERSE RATE X24 / Z24 PLUS VDI20 TOOLING PARTS CATCHER SWARF CONVEYOR POWER TAIL STOCK TURRET TOOLING

Condition: excellent (used), Roll width 60 cm 38 mm passage 3 kW motor Dcjdpfx Aferh D Ndjnsc turning diameter 25/7.5 cm Dimensions: Width 100 cm height 140 cm Length 200 cm

Year of construction: 2018, operating hours: 34,879 h, condition: used, machine/vehicle number: 710298, Travel paths (X/Y): 37/25 cm, weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool-Monitor tool monitoring device, KNOLL 320S-1/225 chip conveyor, year of manufacture: 2018, serial number: 2074174, HYDAC chiller, compressed air filtration unit DSL Sigmatec 15, YASKAWA handling robot YR-MH00012-A00, serial number: K17731-034-1, year of manufacture: 2018, automation system/workpiece storage EGS Sumo Ecoplex Automation Benzinger, year of manufacture: 2018, serial number: 180101, double position, 1 side table Dcodpfxjx Akirs Afnsc

Year of construction: 2005, condition: ready for operation (used), A lathe (Universal Turning Solution) is offered, control: Fanuc, tool turret: 12-station, tailstock, 3-jaw chuck. Tool setting arm: Renishaw HPRA. Inspection is possible by arrangement. Dcsdsx I Rpxepfx Afnjc

Year of construction: 2022, condition: like new (used), The Polygim Mini 88 is an extremely compact and user-friendly machine, designed specifically for the efficient machining of simple parts. With its space-saving design and robust, durable construction, it offers a perfect solution for operations with limited floor space or for integration into existing production lines. Description Technical Data Unit Machine Poly Gim MINI-88 2-axis CNC lathe with Fanuc 0iTF Plus control Spindle Dsdswpgiwspfx Afnecc Max. spindle speed 100 – 5,000 rpm Max. machining diameter (with chuck) — Max. machining diameter (with collet) 60 mm Max. machining length 120 mm Spindle motor 100% DC-2.2 kW / 50% DC-3 kW Turning diameter Turning diameter 60 mm Turning length 120 mm Bar capacity 26 mm Travel distances X-axis 150 mm Y-axis 170 mm Tooling Tool holder 16 x 16 mm Ø 20 mm Hydraulic chuck 4" Smallest programmable increment 0.001 mm Accessories Including RS232 and PCMCIA interface Line graphic display Box guideways on Z-axis Chip conveyor Hydraulic hollow clamping device for chuck and collet fixture Chuck Ø 100 mm Parts catcher 8-station turret and linear system Central lubrication Coolant pump

Year of construction: 2010, condition: ready for operation (used), A twin-spindle turning and milling center Mazak is available. Travel X/Y/Z: 580mm/160mm/1545mm, B-axis: 225°, C-axis: 360°, center distance: 1500mm, max. turning diameter: 660mm, swing diameter over bed: 660mm, speed main spindle/counter spindle: 5000rpm, tool stations: 40+9, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5200mm/2550mm/2600mm, weight: approx. 14000kg, spindle hours: 24679h. Including high-pressure coolant, SMW steady rest, SMW chuck, steady rest integration, Renishaw probe, measuring probe, CAD/CAM software Topsolid 7.18, oil skimmer, postprocessor and Inspection-Plus package. The machine was mainly used for finishing. Documentation available. An on-site inspection is possible. Dodpfox Ih Dgox Afnjcc

Year of construction: 2022, condition: ready for operation (used), A CNC double-spindle turning machine DMG Mori is available. Turning length: 800mm, power: 25kW/32kW, torque: 280Nm/360Nm, speed: 5000rpm, Y-axis: +/-100mm, B-axis: +/-110°, tool stations: 80, max. chuck diameter: 210mm, tool interface: HSK-A63, drawtube inner diameter: 67mm, control: Siemens 840D sl, operating hours: approx. 4786h, program hours: approx. 1937h. Including short bar loader IRCO ILS-MUK 100/16, oil mist separator and scraper chip conveyor. Documentation available. On-site inspection is possible. Djdpox H S I Tefx Afnjcc

Condition: used, Year of construction: 2013, functionality: limited functionality, machine/vehicle number: 105032, Technical characteristics: Work Area - Maximum clamping plate diameter: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse in Z: 30 m/min - Standard integrated automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size A5 - Maximum spindle speed: 6,000 rpm - Spindle power (100%/40% duty cycle): 18.1 / 13.9 kW - Spindle torque (100%/40% duty cycle): 77 / 59 Nm Dodpfjxxwztjx Afnocc Tool Turret with Driven Tools - Tool holders according to DIN 69880: 12 positions - BMT65 - Maximum tool length including holder: 190 mm - Maximum tool speed: 6,000 rpm - Maximum torque: 27 Nm (10% duty cycle), 14 Nm (100% duty cycle) Electrical Equipment - Operating voltage: 400–480 V, 80 A - Connected load: 27 kVA Dimensions - Overall dimensions: Length = 4,350 mm (with chip conveyor), Width = 1,600 mm, Height = 2,500 mm - Weight: 5,500 kg Main Features and Capabilities: - Vertical Design: Optimised for chip evacuation and easy loading/unloading - Control: GE Fanuc FS 32i B - High Precision: Positioning accuracy on X and Z axes ±0.001 mm, Haidenhain linear scales - Main Spindle: High power output and wide speed range - In-process Control: Marposs T25 measurement probe - Automated Loading/Unloading: Parts are automatically loaded and unloaded by integrated automation - Live Tooling: Capable of drilling and milling with driven tools - Tool Life Monitoring with Sister Tool Management - Chip Conveyor, Coolant System, Switchable Dual Cartridge Filter, High Pressure Pump (15 bar) - Fully Enclosed Work Area, Work Area Lighting - Documentation: Electronic available; paper manual not complete Machine Condition: WORKING - Operator panel safety switch is broken

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: M234205, Technical Specifications: Work Area - Maximum turning diameter: 250 mm - Maximum machining diameter: 250 mm - Maximum workpiece length: 555 mm - X1/X2-axis travel: 195 mm / X-axis rapid traverse: 30 m/min - Z1/Z2-axis travel: 600 mm / Z-axis rapid traverse: 30 m/min - Y-axis (Upper Turret) travel: ±41 mm / Y-axis rapid traverse: 30 m/min - B-axis travel (Right Spindle Travel): 620 mm / B-axis rapid traverse: 30 m/min Main Spindle - Spindle interface to DIN 55026: Size 6 - Max. speed: Left 4500 rpm / Right 5000 rpm - Power at 100% duty cycle: Left - 15 kW / Right - 7.5 kW - Bar capacity: Left spindle - 65 mm / Right spindle - 51 mm Tool Carrier with Driven Tools - Tool interface: BMT55 - Number of stations: 12-station disc turret, all stations driven - Max. speed: 6000 rpm; Milling motor power: 3.7 kW Electrical Equipment - Operating voltage: 200V 3-phase, fuse 217A GL - Connected load: 75 kVA Dimensions - Machine dimensions (L×W×H): 4,059 × 2,314 × 2,225 mm - Weight: 6,000 kg Key Features and Capabilities: - Horizontal design: Optimized chip removal and easy loading/unloading - CNC control: Fanuc 18i-T Dcjdpsxxvw Hofx Afnec - Chip conveyor - Bar feeder interface - Documentation: Electronic not available / Paper manual available Machine condition: NOT OPERATIONAL - B-axis not functional - Lower turret not functional