Year of construction: 2021, operating hours: 50 h, Condition: excellent (used), Functionality: fully functional, Used PMH filament line Consisting of: used PMH EX30 extruder 30mm /28ld nitrided barrel and hardened screw used PMH Cool 3000 water bath made of stainless steel 3000mm long used AB50 with 2-axis laser measuring system used winder W250 with a winding force of max. 5kg. suitable for many common filament spools from 1-5kg. Fpjlowbva Aoqzfuzeg You are welcome for inspection this machine in our warehouse Königswinter

Year of construction: 1991, operating hours: 32,000 h, Condition: refurbished (used), • One pair of original WEBER screws (excellent condition, including measurement report Fpelewaxuaeqzfuzsg • One pair of non-original screws • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS control • Output on PVC around 700 kg/hour

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Fpjlqzefhgvwsfuzsg Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: new, Year of construction: 2025, Functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Folqzfujwg Sgcezepg Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: excellent (used), Year of construction: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of a device that combines a machine built on the basis of the most modern components with high efficiency and the most favorable price. This machine operates on the basis of linear motor technology (magnetic cushion), allowing for long-term operation of the device. The set of tools with which the machine is equipped allows for cleaning the most common PVC profiles on the market. The basic machine is a strong, stable frame made of structural steel. The control panel is equipped with a PC computer. Basic equipment: Working arm: The working arm is driven by a linear motor (no clutches, gears, racks, lead screws). The linear motor moves at a set distance from the magnetic strip - no friction!! Linear motors (for the "X" and "Y" axes) are numerically controlled. Air cushion the working arm weighing several dozen kilos during the movement in the "Y" axis is supported by a pneumatic actuator - it constantly supplies pressure of a fixed value, which balances the weight of the arm. This solution allows for the use of short working times without the need to expose the machine components to the risk of rapid destruction. Control panel Independent control panel with a PC computer The operator menu is described by function keys - ease of use in production conditions. from the control panel, you can easily make corrections to the outline of the profiles (it takes the operator about 1 to 2 minutes to make the correction) Other data: Automatic system for cleaning the working surface Automatic clamping and centering of the material Minimum and maximum height of the processed profile: 40 - 150 mm Minimum and maximum width of the processed profile: 40 - 130 mm Fslqzewhu Hhsfuzopg Minimum size of elements: external 340x400 mm VP - transport packaging BASIC SET OF UPPER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bead groove drilling unit for the gasket BASIC SET OF LOWER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bevel drilling unit under the seal ADDITIONAL SET OF LOWER AND UPPER AGGREGATES: working unit with a knife for cleaning flat surfaces without a groove working unit with a knife for cleaning flat surfaces without a groove

Condition: good (used), Year of construction: 2004, 570 C 2200 - 675 Thermoplastic cylinder cpl. 55 mm highly wear-resistant Technology level 2 servo-controlled with 2 control pumps Thermoplastic processing Open nozzle 55 mm Nozzle tip radius 35 Heating tape for open nozzle Heating tape for extended nozzle tip Nozzle tip Clamping plate set 570 central Ø 125 mm Connection for blow-out device 1 Selector unit incl. connection Core pull 1, simultaneous movement Holding pressure manually adjustable Power-operated safety slide Robot system interface (to EUROMAP 12), 32-pin ARBURG master computer interface Power socket vert. 1 CEE, 1 additional Schuko Cutting unit Temperature control unit WKZ 20 mA Interface printer serial V24 Parallel connection for heating tape nozzle tip Interface coloring device Low-current switch cabinet 400 x 800 Folowgb E Isqzfuzjpg Heavy current switch cabinet 800 x 800 4 free cooling circuits manually adjustable Machine-related cooling circuits controlled Extended monitoring equipment package Equipment package extended movements Production control equipment package Optimization / operating aids equipment package Quality assurance equipment package Documentation equipment package Without granulate container 50 L Injection control TFT color monitor Oscillating elements Selogica control (sequence editor) Connection ejector plate safety device Ejector quick-release coupling Water-cooled switch cabinet Power socket vert. 1 CEE, 1 Schuko Hydraulic ejector Larger holding pressure pump for simultaneous movements of the secondary axes, e.g. core pull functions during mold opening Cycle start when closing protective hood

Condition: used, Used DC motor Fpelqzfswbhg Uouzeg Anchor 460V // Current 325A field 340V // current 4,7 A Speed 1880rpm Power 138kW

Condition: used, BG3909L, Branson, SM1130153, Combination Transducer Series 9500 Model: BG3909L Condition: Used Fjlqzfuoq S S Hmszepg

Condition: excellent (used), Year of construction: 2000, operating hours: 46,000 h, Functionality: fully functional, machine/vehicle number: 180316, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, Fully functional plastic injection molding machine with associated documentation and diskettes. The machine operated in clean production. Fpslqzov N D Rajfuzeg The machine was injection molded with LDPE material, so the tip and screw are in first-class condition. Every 2 years, the pressures were checked and confirmed by an Arburg authorized service.

Condition: new, Functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2025, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Fslqowg Sd Uozfuzspg

Condition: excellent (used), For sale, Form thermostat - Tool Temp TT-188 Max. heating temperature - 90°C Medium - water Power: 9850 Watts The device has: - vacuum pump vaccum - vacuum tank Folqzfsvzb Nqjuzepg - function of sucking the medium out of the mold - the device can be integrated with the machine, maintenance-free

Condition: excellent (used), Year of construction: 2017, 1x used Arburg 1500T 1600-170 Ma-No. 241988 Year of manufacture: 08/2017 Complete thermoplastic cylinder, 30 mm, highly wear-resistant Standard screw coupling, two-edge coupling geometry Selogica direct control system Technology level 2, servo-driven with 2 control pumps Special model rotary table, ergonomic design Thermoplastic processing 2-station rotary table, 180° forward/backward alternating Open nozzle, 30 mm Nozzle tip radius 35 mm Heating band for open nozzle Central clamping platen set, Ø 125 mm Blow-out device 1 with pressure reducer at station 1 Connection for blow-out device 2 at station 2 Connection for tool position monitoring on the movable mold platen Connection for tool position monitoring on the rotary table Core pull 3, simultaneous travel movement P/Q controlled, programmable Core pull 4, simultaneous travel movement P/Q controlled, programmable Core pull 1+2, on the rotary table P/Q controlled, programmable Light curtain at 180° Continuous oil cooling and filtration Connection for oil bypass filtration Fpelqzfuowgb Ezozjg Extension pipe for granulate container Injection compression molding and venting with clamping unit Interface to host computer OPC-UA 8 programmable inputs/outputs Socket combination 1CEE, 1 Schuko, protected by a 30mA Type B residual current device Socket combination 3CEE, 3 Schuko, protected by a 30mA Type B residual current device Interface WKZ 20 mA temperature control unit HB-THERM temperature control unit connection cable Printer serial USB interface CompactFlash interface for data storage Operator authorization with chip card according to EUROMAP 65 9 electrical heating control circuits for tool heating Inking device interface Lighting in the loading area 7 free cooling circuits, manually adjustable 2 cooling circuits on a moving plate for water, max. 60°C 2 cooling circuits on a turntable for water, max. 60°C 2 temperature control circuits on a moving plate for water, max. 140°C 4 temperature control circuits on a Water rotary table, max. 140°C Machine-specific cooling circuits controlled Extended monitoring package Extended travel motion package Production control package Optimization/operating aids package Quality assurance package Documentation package Axis monitoring package aXw Control ScrewPilot for 1st injection unit 8-way rotary union, top-mounted Corrosion protection treatment for rotary table Circumferential sealing lip on the outside

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 403 6274, overall weight: 297 kg, Dimensions: Machine width: approx. 700 mm Machine depth: approx. 1,350 mm Machine height: approx. 1,250 mm Weight: approx. 250 kg Cutting angle 45 degrees Tools used: All milling and cutting tools must meet the DIN EN 847-1 standard and have an appropriate working speed to the speed of the milling cutter motors. Milling cutter: Ø 150x30x3.0 32 teeth Cutting disc: Ø 300x30x2.6 96 teeth GLA 403 USER MANUAL Copyright  by FM ROTOX Sp. z o. o. Page: 14 Fpelqzjwhpp Rsfuzjg Processed material: PVC glazing beads: Profile length: min. 200mm (depending on the length bumper) Profile height: min. 5mm max. 50mm Profile width: min. 10mm max. 50mm Tool pressure: Pneumatic Electrical part: Electrical connection: 400V, 50Hz (AC) Power consumption: 2.2kW Fuse: 16A (slow) Saw motors: 230/400V; 4.0/2.3A 1.1kW; 50Hz; 2860 1/min Pneumatics: Working pressure: 5-6 bar Limit pressure: min. 5 bar (also during operation) max. 6 bar Air consumption: approx. 15 l/min / saw run-up Tip: NW Ø 9mm Permitted temperature during operation: min. 15°C and max. 40°C

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 22-2941, total width: 700 mm, total length: 800 mm, total height: 1,700 mm, empty load weight: 40 kg, Equipment: documentation/manual, Hello, for sale is a dispensing system for 2K liquid silicone rubber (LSR) for 20 l containers. This is a demonstration unit. A material feeder and a color dispensing unit are included. Fslqzfujv T Ii Uozopg Truck loading is guaranteed.

Condition: ready for operation (used), Year of construction: 2001, General Data Machine weight 16000 kg Fpslqowbwz Iozfuzog Clamping Unit Clamping force 3200 kN Additional Equipment International Dimension: 3200H-1636 This FERROMATIK K-TEC 320 S was manufactured in 2001. A robust hydraulic injection moulding machine, it's ideal for precision plastic processing. Consider the opportunity to buy this FERROMATIK K-TEC 320 S hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2025, Condition: new, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Felqswg R Rtszfuzepg

Condition: good (used), Functionality: fully functional, Main pump Bosch Type 518 216 509 Additional pump Parker Folqsvz Saaozfuzopg Type PAV 6.3 Removed from a fully functional Arburg with a clamping force of 50 t

Condition: good (used), Year of construction: 2010, 1x used Krauss Maffei KM 300-2000-380-CX with robot, safety fence, conveyor belt, and turntable! Year of manufacture: 2010 Machinery No. 61014333 Horizontal screw: 70 mm Vertical screw: 30 mm Core pulls: 4x Fpslqjwgb Enozfuzeg Hot runner control stations: 16 zones The machine is available immediately!

Condition: used, Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 6485, Foam cutting machine / circular splitter for PUR flexible foams or block foams. Fpolqevzy Hujzfuzsg

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 4450000410, clamping force: 500 kN, screw diameter: 32 mm, column diameter: 45 mm, displacement volume: 95 cm³, injection pressure: 1,076 bar, injection weight: 69 g, mold height (min.): 250 mm, overall weight: 2,430 kg, power: 16.8 kW (22.84 HP), Equipment: documentation/manual, Dr.Boy LSR (silicone) injection molding machine, built in 2024, is being sold unused due to project cancellation. Equipment Evacuation Interface for brush control Interface for handling device (EUROMAP 67) Fslqjv R Ia Iszfuzepg

Condition: excellent (used), Year of construction: 2018, operating hours: 20,500 h, Functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit SECHS ACHS Roboter Hersteller: ARBURG Typ: 570S2200-400/170 Baujahr: 2018 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 201 cm³ Spritzteilgewicht: 184 g/PS Schnecken DN 2: 25 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 54 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Verlängerte Holme Vorverlegter Zylinder 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2018 Folqju E Id Tjzfuzjpg Förderband Schutzzaun

Year of construction: 2008, Condition: ready for operation (used), Clamping force: 1600kN, opening stroke: 500mm, mold installation height min./max.: 275mm/585mm, max. platen distance: 1085mm, platen dimensions X/Y: 770mm/770mm, tie bar dimensions X/Y: 520mm/520mm, ejector stroke: 160mm. Screw diameter: 40mm, screw stroke: 203mm, injection weight: 160g. Documentation available. On-site inspection is possible. Fslqzfowgczwouzepg

Condition: good (used), Multronica Controllers 5 available Price: €500 each Fpolou Evbgjqzfuzsg €1500 for 5!!!

Condition: good (used), Year of construction: 2007, operating hours: 55,000 h, 1x used Arburg 570C 2000-800 Golden Edition Year of construction: 09/2007 Ma-No. 206432 Auger: 50mm Blow-off valve: 2x Core pull: 1x Handling interface Host computer interface Printer interface Interface for inking unit Fpelqewgb Ebszfuzeg Connection for conveyor belt via 5-pin plug Connection for selection unit The machine is sold without any other visible peripherals / tools!

Year of construction: 2008, Condition: ready for operation (used), Clamping force: 800kN, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 580mm/590mm, opening stroke: 450mm, min. mold installation height: 250mm, max. mold weight: 650kg, ejector stroke: 125mm, ejector force: 45kN. Screw diameter: 35mm, shot weight: 168g, dosing volume: 185cm³, injection pressure: 1800bar, plasticizing capacity: 15g/s. Control system: NC5, robot interface: Euromap 67, machine weight: approx. 4100kg, machine dimensions X/Y/Z: 4100mm/1400mm/1900mm, operating hours: approx. 73500h. Documentation available. On-site inspection is possible. Fjlqowgczkozfuzopg