Year of construction: 2007, Condition: used, “ROTOX” 4-point welding machine type SMK 504 Investment in 2018 as equipped with: • 4 pieces Welding units equipped with welding bead limitation up to 0.2 mm. • Welding units adapted for welding the HVL connection. • This makes the table side the outside profile. • Max. welding dimensions approx. 3300 x 4000 mm. • Min. welding dimensions approx. 400 x 400 mm. • Depending on profile width and technically required adjustments. • Max. profile height approx. 125 mm. • Max. profile width approx. 140 mm. • Electronic control and automatic positioning of the • welding units at the correct length and width dimensions. • Automatic outfeed transport. • Automatic outfeed transport track to the “ROTOX” Angle processing machine. “ROTOX” CNC Corner processing machine type EPA 479 Machine for fully automatic processing of welded corners. Investment in 2018 as equipped with: • Up to max. 8 tools can be mounted on the slide at the top as well as • on the slide at the bottom. • Pneumatic clamping device. • Coupling with 4-point welding machine. Cob Hsv Nzbcel E I Rsgt • Automatic transport and turning station. • Outside corner processing by means of CNC-controlled milling blade. • Very user-friendly control. • Max. size automatic turning is approx. 2500 x 2500 mm. and is • dependent on weight, profile and protective film.

Condition: used, Year of construction: 2003, Vertical pressure machine designed to produce pressed rubber and plastic parts by vulcanization. Manufacturer: RUTIL Type: VERTICALE DAS 100/30 RP Year of manufacture: 2003 Technical parameters: Cgebountc Eo Hl E I Rot Injection volume: 100 cm3 Injection pressure: 1480 kg/cm3 Nozzle diameter: 22 mm Hydraulic motor: 75 cm3 Max. operating pressure: 200 kg/cm2 Heating plates: 350 x 300 mm Closing force: 30 tons Minimum form: 130 mm Movable plate lifters: 350 mm Installed power: 21 kW Dimensions: width: 1400x1700 mm, height: 3050 mm Weight: 3300 kg . Full technical documentation. Technical condition: used machine, working until taken out of production

Condition: used, Year of construction: 2006, operating hours: 60,000 h, Injection molding machine Krauss Maffei 50-180 CX Year 2006 Cgeb Hl Ejv Tmzpj I Rjt screw di 30

Condition: used, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 201815009051245, clamping force: 900 kN, screw diameter: 28 mm, clearance between the columns: 370 mm, column diameter: 420 mm, displacement volume: 67 cm³, injection pressure: 220 bar, injection weight: 61 g, mold height (min.): 150 mm, ejector force: 1,900 N, ejector stroke: 80 mm, opening stroke: 320 mm, total length: 4,310 mm, total width: 1,290 mm, total height: 1,920 mm, overall weight: 4,300 kg, type of input current: three-phase, pressing force: 90 t, For sale electric injection molding machine from 2018 in very good condition Csb Hjv Sra Uol E I Rsgt

Condition: new, Year of construction: 2023, operating hours: 20 h, Functionality: fully functional, machine/vehicle number: 201023, DICER MOD. F-36 HEAVY SERIES SOUNDPROOF Csbsv Tadwj Hl E I Rogt DICER for granulating continuously extruded plastic sheets, for thermoplastic products. Maximum width of the sheet to be ground 350 mm and thickness 6 – 8 mm. HP 20 V. 400 Hz 50 motor Rotor in wear-resistant steel with high chromium content, multiple blades with 14 cuts and speed from 10 to 30 m/min. Transmission by belts Steel towing rollers with progressively variable trino speed and in accordance with the number of cuts. Size of the granule obtained 3 x 3 mm Pneumatic presser Base in solid steel structure The machine is soundproofed Electrical panel in compliance with CE standards with remote control switch and safety micro. SPEED VARIATOR WITH INVERTER

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Cgob Hl Ejd N Erps I Rot Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2018, THERMOSTAT PIOVAN THW12 Year of manufacture -2018 Cgebov Sz Nre Hl E I Ret Maximum temperature 90°C Cooling medium water Heating power 12kW Power of pump C 0.75kW Maximum pump capacity C 40 l/min Maximum pressure C 60m Dimensions 400x867x1000mm Weight 20kg

Condition: used, A pressure machine designed to produce pressed rubber and plastic parts by vulcanization. Manufacturer: LWB Steinl Cob Hl E Iju Snwto Regt Injection volume: max. 75 cm3 Injection pressure: max. 1000 bar Closure body: max. 300 kN Heating flap size: 300 x 300 mm Voltage: 380V, 50 Hz, 63A High-pressure pump capacity: 23 l/min Motor power: 7.50 kW Year of production: 1998 Technical condition: used machine, working until taken out of production

Year of construction: 2017, Condition: ready for operation (used), Travel X/Y/Z: 3100mm/1530mm/150mm, spindle power: 13.2kW, tool holder: HSK F63, table rotation range: 360°, speed: 24000rpm, tool positions: 16, vacuum pump capacity: 250m³/h, connected load: 35kW, machine weight: approx. 6000kg. Documentation available. On-site inspection is possible. Csb Hl E Iov R Eyfj Rsgt

Condition: used, Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 201707012030996, clamping force: 1,200 kN, screw diameter: 80 mm, clearance between the columns: 410 mm, displacement volume: 214 cm³, injection pressure: 192 bar, injection weight: 195 g, mold height (min.): 150 mm, ejector stroke: 120 mm, opening stroke: 360 mm, plate length: 615 mm, plate width: 615 mm, total length: 5,030 mm, total width: 1,320 mm, total height: 2,030 mm, overall weight: 4,400 kg, type of input current: three-phase, pressing force: 120 t, Clamping force: 120 T Type of machine: hydraulic machine Mold platen dimension: 615x615 mm Distance between tie bars (h x v): 410x410 mm Mold opening stroke: 360 mm Max. mold height: 450 mm Min. mold height mold height : 150 mm Ejector stroke: 120 mm Ejector force: 33 kN Minimum mold dimension (l x w): 290x290 mm INJECTION UNIT Screw diameter: 80mm Shot size (theoretical): 214 cm3 Cjb Hl Eev Sq Nue I Rsgt Injection weight (PS): 195 g Injection stroke: 170mm Injection speed: 118 mm/s Injection pressure: 186 Mpa Screw speed: 325rpm Power Maximum hydraulic pressure bar Servo motor power: 15 kW Machine dimensions (l x w x h) 5.03 x 1.31 x 2.03 m Machine weight 4.4 T

Year of construction: 1991, Condition: ready for operation (used), machine/vehicle number: 75910016, Used mill with a screw for sprue feed, ideal for odd-shaped or long sprues. Cgeb Hl E Ijv Sm Efs Rst No longer needed, therefore for sale. Inspection under power is possible; please bring sprues for testing.

Condition: good (used), Autotherm Type: Temperature control unit Autotherm AW 95-12/VK/E Temperature control unit Autotherm AW95-12_VK for water / glycol temperature control (refurbished) Autotherm AW temperature control unit: For high-precision temperature control of water Temperature control units from autotherm are used in various areas of industry, research and laboratory applications. Temperature control units supply, for example, tools, open baths, double-walled containers, heat exchangers and heating chambers with tempered water, to keep them at the desired temperature with high precision. Areas of application: Mechanical engineering, e.g. solar and wind power industry, textile industry Plastics processing Chemicals and pharmaceuticals paper production medical technology Food industry Research and development Temperature control unit Autotherm AKW AW95-12/VK Temperature range RT°C / +95°C Cgsb Hlouigrzj E I Ret Heating capacity 12.0 KW Cooling capacity 18.0 KW Passive cooling system via heat exchanger / connection to cooling water network required Nominal output 14.5 KW Dimensions 600mm x 840 mm x 910mm Power consumption: 400Volt/ 50 Hz 13400 Watt 19,6 A 5,1 bar Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, type of input current: three-phase, HSM - T - DRIVE - CL - R4 - SV - 30/26. Year of production 2020. ContourLine-Classic and V-system welding technology. Possibility of welding frames and sashes and frames with threshold. Minimum dimension of welds : 490 mm x 497 mm. Maximum dimension of welds : 2690 mm x 3100 mm. 100% servo controlled welding process. Programming via touch screen. High temperature welding Cob Hovf D U Rjl E I Regt Quick change sealing film system Quick liner replacement system Diagonal or parallel joining process Individually programmable welding parameters CE-compliant safety device Horizontal receiving device

Year of construction: 2020, Condition: as good as new (ex-display), Automatic machine for the production of disposable, foil gloves with a welder and hole cutter. Ideal for the production of PE/EVA/CPE gloves. Technical data: Model: SLQ-600 Glove length: 200-400 mm Glove width: 270-330 mm Foil thickness: 0.008-0.02 mm Efficiency 40-150 pieces / min Power: 1.5 kW Power supply: 230 V 50/60 Hz Weight: 600 kg Dimensions: 2300 x 1190 x 1500 mm Year of production: 2020 Includes a welding machine / hanging hole cutter: Model: BX 450 Power: 100 W Power supply: 230 V 50/60 Hz Weight: 25 kg Cgsb Hl Ejh E Sp Ro I Rjt Year of production: 2020 Technical condition: used machines, functional

Year of construction: 2012, Condition: ready for operation (used), Dryer: Diameter of process line/regeneration drain line/compressed air line: 88.9mm/50mm/8mm, degree of filtration: 20µm, filter area: 0.24m², max. process temperature: 200°C, weight: approx. 415kg. Tank: diameter: 996mm, height: approx. 2000mm, total height: approx. 2450mm, empty weight: approx. 160kg. Documentation available. On-site inspection is possible. Csb Hl Esv R Ewwj I Rogt

Condition: used, Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 201707012032351, clamping force: 1,200 kN, screw diameter: 80 mm, clearance between the columns: 410 mm, displacement volume: 214 cm³, injection pressure: 192 bar, injection weight: 195 g, mold height (min.): 150 mm, ejector stroke: 120 mm, opening stroke: 360 mm, plate length: 615 mm, plate width: 615 mm, total length: 5,030 mm, total width: 1,320 mm, total height: 2,030 mm, overall weight: 4,400 kg, type of input current: three-phase, pressing force: 120 t, Clamping force: 120 T Type of machine: hydraulic machine Mold platen dimension: 615x615 mm Distance between tie bars (h x v): 410x410 mm Mold opening stroke: 360 mm Max. mold height: 450 mm Min. mold height mold height : 150 mm Ejector stroke: 120 mm Ejector force: 33 kN Minimum mold dimension (l x w): 290x290 mm INJECTION UNIT Screw diameter: 80mm Shot size (theoretical): 214 cm3 Injection weight (PS): 195 g Injection stroke: 170mm Cjb Hsv Sq H Hel E I Rogt Injection speed: 118 mm/s Injection pressure: 186 Mpa Screw speed: 325rpm Power Maximum hydraulic pressure bar Servo motor power: 15 kW Machine dimensions (l x w x h) 5.03 x 1.31 x 2.03 m Machine weight 4.4 T

Condition: reconditioned (used), > Completely overhauled and newly painted. Cgob Hsfua H Ael E I Rst

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P385 The EOS P385 system includes the following Installation space container Powder container Cooler: Termo TEK Termochiller 1100 The following upgrade has already been performed : Software: CD's Eosint P3 process software PSW 3.2 for Windows 2000, XP Cgjbof Ey Eaj Hl E I Ret Materialice: Magics RP 9.0 Machine upgrade from P360 to P385 on 10.08.2007 Laser change 15.05.2008 X Drive Motor. Change of used engine 04.05.2020 Pyrometer change 30.06.2020 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V A, frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT Upgrade P385 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: used, Automatic machine for producing plastic bags for T-shirts or shopping bags Manufacturer: COSMO Coberww E Io Hl E I Rsgt Model: ST-99 Bag size: - length: 350 - 650 mm - width: 160 - 365 mm - thickness: 0.008 - 0.05 mm Throughput: 180 - 300 pcs/min Installed power: 12 kW Power supply: 230 V, 3 phases, 50/60 Hz Dimensions: 7150 x 1600 x 1750 mm Additional air compressor required: 10 hp - not included Technical condition: used machine

Year of construction: 2007, Condition: ready for operation (used), Various old injection molding machines are available. 1) Demag Concept 80/370-200, force: 80t, screw diameter: 30mm, year of manufacture: 2006. 2) Demag Concept 80/370-200, force: 80t, screw diameter: 30mm, year of manufacture: 2006. 3) Demag ET 150/500-610h/120v multi, force: 150t, screw diameter: 50mm/25mm, year of manufacture: 2003, operating hours: approx. 100000h. 4) Demag ET 150/500-610h/120v multi, force: 150t, screw diameter: 50mm/25mm, year of construction: 2006, operating hours: approx. 105000h. 5) Engel VC 740/150 electric, power: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 6) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 7) Engel VC 740/150 electric, power: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 8) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 67000h. 9) Engel VC 940/200 electric, force: 200t, screw diameter: 60mm, year of construction: 2007, operating hours: approx. 98000h. 10) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 11) Demag ET 200-560-840 concept, power: 200t, screw diameter: 60mm, year of construction: 2000. 12) Demag ET 200-560-840 concept, power: 200t, screw diameter: 60mm, year of construction: 2001. 13) Engel VC 940/200 electric, force: 200t, screw diameter: 60mm, year of manufacture: 2006, operating hours: approx. 107000h. Documentation available. On-site inspection is possible. Individual sale possible. Cebov R Ew Do Hl E I Rogt

Condition: used, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 201807012051958, clamping force: 1,200 kN, screw diameter: 80 mm, clearance between the columns: 410 mm, displacement volume: 214 cm³, injection pressure: 186 bar, injection weight: 194 g, mold height (min.): 150 mm, ejector stroke: 120 mm, opening stroke: 450 mm, plate length: 615 mm, plate width: 615 mm, total length: 4,820 mm, total width: 1,320 mm, total height: 2,120 mm, overall weight: 4,400 kg, type of input current: three-phase, pressing force: 120 t, Clamping force: 120 T Type of machine: hydraulic machine Mold platen dimension: 615x615 mm Distance between tie bars (h x v): 410x410 mm Mold opening stroke: 360 mm Max. mold height: 450 mm Min. mold height mold height : 150 mm Ejector stroke: 120 mm Ejector force: 33 kN Minimum mold dimension (l x w): 290x290 mm INJECTION UNIT Screw diameter: 80mm Shot size (theoretical): 214 cm3 Injection weight (PS): 194 g Injection stroke: 170mm Injection speed: 118 mm/s Injection pressure: 186 Mpa Screw speed: 325rpm Power Maximum hydraulic pressure bar Servo motor power: 33 kW Machine dimensions (l x w x h) 4.82 x 1.32 x 2.12 m Cgsb Hl E Isv Sq D Ee Rot Machine weight 4.4 T

Condition: reconditioned (used), > Sealing machine with 4 stations. > Lift-in and lift-out station. Cgjbjfua Dce Hl E I Rst > Further details on request

Condition: excellent (used), Fill 3D Ultrasound Cutter Here we offer a Fill 3D ultrasound cutting system. Fill 3D-ultrasonic cutter 3D-ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fibre-reinforced plastics by means of ultrasonic excited cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to robot) High repeatability High process stability Simple and fast tool change Possible integration into an overall process chain The principle: The linear axis gantry enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC control 840 D allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can easily be made directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The cutter is equipped with a separate rotary axis, in order to be able to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data component length max. 1.000 mm component width max. 900 mm component height max. 400 mm path repeat accuracy +- 0,1 mm Cgob Hlef Tph Ie E I Rst positioning accuracy +- 0,2 mm Load capacity approx. 30 kg E-control Siemens Sinumerik 840D

Condition: reconditioned (used), > With additional carton applicator. > completely overhauled. Csbofua Rie Hl E I Rjgt

Condition: reconditioned (used), > Small moulding machine with the format 350x250x90. Cjb Hlefugz Uo E I Rsgt > For skinning and blistering of small batches. > As a sample machine for every company. > Optionally also with upper punch. > Further details on request. > Completely overhauled and newly painted