Condition: new, Year of construction: 2023, nominal power: 29,8 kW air flow: 2400m³/h combustion chamber depth: 580 mm slide-in door: 330 mm x 330 mm designed for room volumes: ca. 600 m³ aproximate surface to heat up: ca. 120 m² floor space: 600 mm x 800 mm x 1900 mm weight: 230 kg diameter flue pipe: 160 mm hot air delivery pipes: 2 x 200 mm Djln Ugueiwfh Ee Nocg modes: automatic and manual Chimney guideline value: 200 mm

Condition: good (used), Year of construction: 1986, machine/vehicle number: #118, Dear customers currently we offer a used bandsaw of the brand F. Zimmermann. Here are the technical data of the machine: Table: 1.000 x 895 mm Cutting width: 775 mm Super cutting height: 640 mm Swivelling of table: 45/10° Diameter of the pulley: 800 mm Power: 4 kW Speed: 1.500 U/min Cutting Speed: 1.400 U/min - motor brake Dimensions: 1.370 x 850 x 2.950 mm Weight: approx. 850 Kg Dsln Uguowhn Avs Nocg If you have further questions feel free to ask us. We are looking forward to your inquiries!

Year of construction: 2023, Condition: used, Mitre milling aggregates: 1 Workpiece thickness min: 2 mm Workpiece thickness max: 28 mm Rotation speed min: 3.000 rpm Rotation speed max: 6.000 rpm Stepless rotational speed control: Yes Main motor power: 4,5 kW Feedrate max: 5 m/min Continuously variable feed: Yes Gluing of protection foil: Yes Transversal processing: Yes Lengthwise processing: Yes Control: Positioning control Djln Ugswhpfrou Nscg Machine type: V-groove milling Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 6 kW

Condition: used, Engine power: 4.0 PS/HP (3.0 kW), Year of manufacture: 2021, Engine voltage: 3x 400 V, Engine frequency: 50 Hz, Sanding belt length: 2600 mm, Sanding belt width: 150 mm Dslnswhb T Is Ugu Necg

Condition: good (used), Code: 0433 Brand: ITALPRESSE Model: V/2 Mechanical press for cold gluing Deln Ugewhy Taeu Necg Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2200 x 1000 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2550 x 1000 x 1650 h Weight kg 750

Condition: used, Sanding train 2 lower bands 2 upper bands Djlnowgx Uys Ugu Necg Upper depression carpet 5.5kw and 4kw motor Electric rise and fall Motorized entrance mat. Digital display 380V

Condition: new, Year of construction: 2025, Working width: 410 mm Planer block: Spiral shaft Planer table length: 1800 mm Planer stop angle adjustable: Yes, 45° to 90° Maximum thickness throughput of thicknesser: 230 mm Thicknesser table height adjustment: Handwheel Dsljgzlnxen Ugu Njcg Planer thickness display: Mechanical counter Feed speed: 6 m/min Infeed roller: Steel Outfeed roller: Steel Table rollers: No Motor power: 4.4 kW Motor brake: Yes, automatic Extraction connection: 100 mm Machine length: 2000 mm Machine width: 750 mm Weight: 325 kg

Condition: new, Year of construction: 2023, Functionality: fully functional, planing height: 105 mm, planing width: 180 mm, overall weight: 990 kg, SCM Profiset 40 ep, four-sided planer New, exhibition machine, built in 2023 Min. working width (finished size): 23 mm Max. working width (finished size): 180 mm Min. working height (finished size): 10 mm Max. working height (finished size): 105 mm Min. length of single workpiece: 300 mm Feed speed: 6 - 12 m/min Dsln Uguewh Nyis Njcg Feed motor power: 0.7/1.1 kW (1/1.5 HP) Motor power of horizontal spindles (individually): 7.5 kW (10 HP) Motor power of vertical spindles (individually): 7.5 kW (10 HP) Spindle speed: 6,000 rpm Spindle diameter: 35 mm Clamping length of vertical spindles: 120 mm Clamping length of horizontal spindles: 190 mm Min./Max. Tool diameter on horizontal spindles: 100 mm Min./Max. tool diameter on vertical spindles: 100 - 120 mm Profile capacity without axial adjustment on vertical spindles: 10 mm Planer head adjustment range: +/- 1 mm Feed roller diameter: 120 mm Feed table length: 1,700 mm Adjustment range for planer table and jointing guide: 10 mm Manual lubricant pump Suction nozzle diameter (4 pieces): 120 mm CE-certified

Condition: used, Year of construction: 2001, Cutting length: 4.400 mm Pusher stroke: 4.300 mm Number of grippers: 9 Feedrate max: 60 m/min Dcelowhpfljn Ugu Neg Continuously variable feed: Yes Saw blade projection: 85 mm Main motor power: 7,5 kW Scoring saw: Yes Labelling: manually Stop side: Left Optimization: Yes SELCO Side aligner: Yes Control: SELCO PC STEUERUNG Conformity marking: CE mark Total connection: 20 kW Weight: 5.800 kg

Condition: good (used), Aggregate kit, finishing unit, grinding unit, grinding station, belt sander, belt grinder, edge grinder, edge sander, profile sanding unit, small belt sander -Manufacturer: KED Kurt Ehemann, Homag, belt sanding unit from belt sander -Type: unfortunately no type designations -Roll: Ø 215 x 295 mm drum motor NG 45/2n 3 kW 2850 rpm -Roll: Ø 150 x 160 mm -Individual components: see photos -Transport dimensions: 830/690/H360 mm Djlnovzqc Hj Ugu Njcg -Weight: 144 kg

Condition: good (used), Code: 0112 Brand: CENTAURO Model: T3-130 Delnowhyu De Ugu Nscg Hydraulic copying lathe for wood, stairs, frames, chairs, tables, etc. Automatic cycle turning system with one copier programmable to perform one or two passes Hydraulic copying unit with touch probe Max distance between centres mm 1300 Height of centres on pallet mm 226 Max diameter mm 250 Tailstock sleeve diameter mm 60 Tailstock sleeve stroke mm 100 Carriage feed speed mt/min 0/6 Carriage return speed mt/min 7,33 Spindle rotation speed rpm 900/1500/1800/2250/3000/4500 Spindle motor power Hp 5 Installed power Kw 4,8 Overall dimensions mm 3520 x 1190 x 1680 h Weight kg 1000

Condition: used, saw-blade dia. 500 mm Cutting height 120 mm Dcoln Uguowhf Ipj Nsg Motor output 5,5/7,5 kW working length 4100 mm

Condition: used, Year of construction: 1985, working width: 500 mm Dslnom H Uxrj Ugu Njcg cutter head: strip knive number of blades: 4 surface table length: 2700 mm adjustment surface table: Hebel read out: table height fence tilting: yes motorpower: 4 kW motorbrake: yes, automatic machine length: 2800 mm machine width: 1000mm weight: 1050 kg

Condition: good (used), Code: 0619 Brand: FINK Model: 140 MEC Rebating cutter with 4 knives Diameter mm 140 Height mm 50 Hole mm 30 Dcjln Ugjd I Td Hsu Njg Max n° turns 8000

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Dsln Ugeif Az Uju Necg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: new, Year of construction: 2024, flue capacity: 350 kW Conventional yeld capacity: 279 kW flue diameter: 200 mm hot air delivery pipes: 3 x 300 mm flue length: 1200 mm oven width: 740 mm oven hight: 1040 mm air flow: 17800 m³/h power consumption hot air fan: 3 kW Doln Usk Utrtogu Necg power consumption flue gas exhaust: 600 W aproximate surface to heat up: 5000 m³ area to be heated: 1000 m² heater height without hot air conveying pipes: 2500 mm heater width: 1100 mm heater length: 1900 mm weight: 850 kg

Condition: used, Number of spindles 4 St. Working width 260 mm Working height 160 mm Length of the planing table 2000 mm Feed speed 6-12 m/min. total power requirement 28 kw Dimensions (L/W/H) 3.300 x 1.600 x 1.700 mm Dust suction hood 1 x 250 mm Weinig Cube four-side planer ----- Machine is cleaned and checked. Technical data ----- Working width 20 - 260 mm Working height 8 - 160 mm (with tool flight circle 125 mm) Spindles ----- WEINIG Easylock with precision reversible knives in HSS for quick and convenient knife changing. You have never changed a knife so quickly. Customer benefits: - no adjustment necessary - short downtimes - no adjustment errors - easy to use Motor strengths: 1st spindle bottom: 7.5 kW 2nd spindle left + 3rd spindle right common motor 11.0 kW 4th spindle bottom: 7.5 kW Feed system ----- Frequency-controlled feed, infinitely variable 6 - 12 m/min Durofer pointed tooth rollers with depth limiter and self-cleaning Pneumatic pressure for feed rollers, including water separator Cycle-controlled dressing to support manual dressing. The feed roller is released after the second feed roller has gripped the workpiece. After leaving the second feed roller, the feed roller is brought into the starting position for the next workpiece. Machine electrical system ----- Operating voltage 400 volts (voltage range 380 - 420 volts), 50 hertz Electrical design according to DIN VDE 01 13, electrical equipment of industrial machines EN60204, IEC- 204-1. Other electrical regulations are not taken into account. Before operating frequency-controlled devices and systems, the customer must install an all-current-sensitive residual current device in accordance with DIN/ VDW 0100-482 in operating facilities at risk of fire Control of the extraction system via the machine software Dceln Uswhf Ivogu Neg Machine stands, tables and stops ----- Planting table 2.0 m long (including jointing tine) One sliding roller in the outfeed table Automatic lubricant supply for removing resin from the table, including 5 liters of lubricant. - controlled by incoming and outgoing wood - lubricant quantity dependent on the set planing width - controlled by running meters traveled - improved transport of individual parts - reduction in contamination from resinous wood - extremely easy to use One sliding roller in the outfeed table MPV - MoulderPreView ----- Optical projection of the finished dimensions onto the raw part before processing. - Dimensional control before planing - Consideration of deflection and curvature when setting - Quick correction of the planing and joining Customer benefits: - Assessment of the workpieces before processing - Higher product quality - Visual inspection Machine operation ----- The clear software was specially developed for the CUBE. Thanks to the intuitive operation, training is not necessary. What can the CUBE software do: - Lightning-fast setting of the workpiece dimensions - Motorized setting of the planing and joining - Clear layout, large symbols - Memo function The last 10 dimensions are saved and can be repeated if necessary. - stepless adjustment of the feed rate - ...

Condition: new, Year of construction: 2024, flue capacity: 510 kW Conventional yeld capacity: 407 kW flue diameter: 250 mm Dceln Ugek Utrwou Nsg hot air delivery pipes: 4 x 350 mm flue length: 1900 mm oven width: 900 mm oven hight: 900 mm air flow: 26000 m³/h power consumption: 4500 W aproximate surface to heat up: 8000 m³ area to be heated: 1800 m² heater height without hot air conveying pipes: 3000 mm heater width: 1220 mm heater length: 2700 mm weight: 1575 kg

Condition: used, Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. Doln Uswhf Iisgu Necg loading dimensions L x W x H 4100 x 2650 x 1050 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 4100 x 2600 x 1050 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 1979, working width: 410 mm cutter head: strip knive number of blades: 3 surface table length: 2400 mm Djlnjgvvx Ie Ugu Nocg adjustment table: Hebel read out table hight: Scala fence tilting: yes motor power: 4 kW motor brake: no machine length: 2400 mm machine width: 800mm waight: 750 kg

Condition: used, Year of construction: 2011, Tenoning spindle 1 Stk Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2784 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please inquire about additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Adjustment range: radially pneumatically controlled to 8 positions, e.g., for edge rounding from above > Laser alignment light for detecting the sawn section Item 2: Rounding unit, horizontal, bottom ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm mm > Spindle speed: 9,000 rpm > Maximum tool travel: 130 mm > Axial adjustment range mechanically coupled to cross-cut saw > Radial adjustment range pneumatically controlled on/off Dcslnjwamqvs Ugu Nsg Length stop NC-controlled ----- > Length 3,500 mm > Electronic length stop Item 3: Tenon and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, continuously adjustable, NC- controlled > Spindle speed: 3,500 rpm > Maximum tool travel: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Cylinder and Counter-rotation) ----- > Position: vertical right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool travel radius: 232 mm > Motor power: 11 kW Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, continuously adjustable, NC- controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool travel radius: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Guide ruler in the stop (concurrent spindle area), Rung support bar from above in the area of ??the profile milling unit vertically on the right, and profiling spindle. Item 6: Profile milling unit, horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.8 kW > Speed: 9,000 rpm > Max. tool travel: 130 mm > Axial adjustment range: 30 mm, 8 positions > Radial adjustment range: 125 mm, 8 positions Item 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 115 mm, 8 positions > Radial adjustment range: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool travel: 210 mm > Motor power: 3.8 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.8 kW > Tool clamping length: 125 mm > Axial adjustment ra...

Condition: used, Year of construction: 1993, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.3 / 1.8 kW Speed: 1400 / 2800 rpm Holder clamp: manual Extraction connection: 100 mm Dcjlnswhuu Ee Ugu Neg Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: used, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw ----- ----- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Dcslnov Uq Tlo Ugu Nsg Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. The CE models must come with it as standard At least 1 meter long support plates/roller tables must be provided at the inlet and outlet. Technical data: ----- Saw cross section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz, 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Machine additionally equipped with: ----- 2 m infeed table (right of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 320 mm. The space between the roles is enclosed in painted steel. Including lateral guidance. 2 m outfeed table (left of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 320 mm. The space between the rollers is of enclosed in painted steel. Includes side guide, stop guide and millimeter scale. 2 pieces of strong pneumatic stops with a width of 200 mm ----- Total price ex works: on request! ----- Image and video not original, show identical model Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)

Condition: used, Number of spindles 4 St. Number of tools 11 St. Spindle diameter 50,40 mm Spindle length 285,125 mm length 4000 mm width 2000 mm height 2200 mm Weinig Univar 10/3 folding machine ----- For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjustable for both tool positions from the operator side. Central lubrication for the spindle units. The 1. Spindle can be selected in right-left rotation. This spindle dips the last 100 mm of each frame end appropriate synchronization tool into the passing wood. Through this This prevents the tool of the subsequent milling spindle from running in the opposite direction working, causing tearouts. Excavation of the first 7 transport rollers using Footswitch. This shortens the lead time. An additional The support rail also allows large-format frames to be milled around. Continuous, chainless rubber roller feed with extreme short roller spacing. Height adjustment of the feed bar electrically readable. Electrical version according to VDE. Machine including operating tools, but without processing tools tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1. Profiling spindle (synchronous and counter-rotation) ----- -- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm with synchronous automatic immersion 2. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Dceln Ugsvnv Uueu Nsg Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 3. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 4. Profile spindle - fitting unit on the right ----- For milling the fitting groove in the milling cycle or for grooving in the longitudinal profile. Pneumatic horizontal movement with Selector switch in the control panel. Motor 2.2 KW Speed 6,000 rpm Spindle diameter 40 mm Clamping height 125 mm, 2 tools Tool flight circle min. 140 mm, max. 180 mm Motor power feed 1.1 kW Feed speed 6 - 12 m/min. ...

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be checked ! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom Deln Ugusu Su Huo Njcg > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)