Condition: good (used), Year of construction: 1991, Scheppach spindle moulder hf 3000 Year of manufacture 1991 Table size 615 x 450 mm Table height 870 mm Finely adjustable router stop Spindle diameter 30 mm Max. tool diameter 200 mm Speeds 3,000 / 6,000 / 9,000 rpm Motor 400 volts / 3.0 kW Right/left rotation Extraction nozzle 100 mm Bracket for sliding carriage Chassis Various accessories Celn Uhfjwhiumsiorb

Condition: used, Year of construction: 2014, Edgeband thickness max: 12 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 200 mm Workpiece width min: 150 mm Feed min: 14 m/min Feedrate max: 20 m/min Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Glue system cartridge: Yes IMA Glue system 283.203 PUR Quickmelt: Yes Quick-change glue pot: Yes Suitable for PUR glue: Yes PUR Aufschmelzeinheit: interner PUR-Aufschmelzer Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes IMA Premilling unit 08.380: Yes Croln Uhowftqaefiob Preheating zone: Yes Andruckzone NC-gesteuert: Yes Trimming saw: 1 motor IMA Trimming saw 08.42: Yes Flush/radius/chamfer milling units: 1 IMA Fine milling unit 08.0561: Yes Corner rounding unit: 4 motors IMA Corner rounding unit SKF Contour trimming unit: Yes Nutfräsaggregat: Yes IMA Universal milling aggregate 08.190: Yes Scraper unit: Profile scraper, Flat scraper IMA Profile scraper unit 08.519: Yes IMA Flat scraper unit 08.521 Duplex flat scraper: Yes Buffing unit: Yes IMA Buffing unit 08.617-2: Yes Aggregates actuated by control: NC-axes Type: left-side machine Machine length: 8.600 mm IMA Workpiece infeed 63.152 Infeed table: Yes Control: IMA ICOS TS Software: BECKHOFF TWINCAT Declaration of CE-conformity: Yes Conformity marking: CE mark Weight: 3.600 kg

Condition: excellent (used), Year of construction: 1999, Mobil Jet Year of manufacture 1999 2.2 kW Crolnswdvr Do Uhfijb Intake manifold 120 mm

Condition: excellent (used), Catalog number: 7641 ADVANTAGES – the best wide planing machine for wet and dry wood – ideal for processing logs, flooring, etc. – 3 planing shafts + 3 spindles – manufactured by the German brand KUPFERMUHLE – used planer, very good condition TECHNICAL DATA max planing width 800mm max planing height 200mm from above: input pulling shaft, toothed + pawls + pressure + 2 pulling shafts, toothed + pressure + planing shaft 800mm, 4-knife 7.5kW pressures + profiling shaft 800mm, 4-knife (3 straight knives, 1 profile knife installed) + pressure + pulling shaft, smooth, output + from below: guide strip + input table + pulling shaft, smooth + planing shaft 800mm, 4-knife 7.5kW 2 pulling shafts, smooth + smooth, sliding, divided roller + side pressure at the outlet + at the back: 2 side spindles + pressures: 1) vertical right 90mm 4kW 2) vertical left 90mm 4kW spindle diameter 35mm spindles set alternately + spindles adjustable up/down, right/left + 3) additional horizontal lower spindle 350mm, adjustable up/down + right/left 5.5kW spindle diameter 40mm Celn Uhfowfti Aeierb at the outlet: 4 upper metal sliding rollers, 2 lower pulling rollers, rubber + adjustable rollers in the lower table + 6 types of feed speed 7/14/9/18/11.5/23m/min 2.2kW feed motor 3×180, 130mm exhaust port diameters 3100x2000x1900mm length/width/height dimensions 3500kg weight Net price: PLN 64900 Net price: EUR 15270 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 2011, working width 430mm Crjlsn Arm Ejn Uhfieb max height 100mm outfeed conveyor 3500mm variable regulated brushes speed variable regulated rolls speed year 2011

Condition: new, Year of construction: 2025, operating hours: 8 h, Machine in pre production *planned to be ready appr. end of may 2025 Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm Crsln Uhsxfwdefijb - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Year of construction: 2008, Ladies and Gentlemen, We are offering a perfectly functioning wide belt sander from EMC. We have been using this machine for approx. 2 years. The machine can be tested and inspected and will be in use until March/April at the latest. Please contact us if you have any questions! Cjlevfnprsn Uhfijrb

Condition: used, Year of construction: 2017, Working dimension X: 5.400 mm Working dimension Y: 1.900 mm Working dimension Z: 350 mm Independent Z-axes: 2 Number of milling spindles: 1 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 24 Disc tool changer: Yes Pickup change place: Yes Vertical drilling spindles: 22 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Stop for top layer protrusion: Yes Workpiece support aids: Yes Celjwfrbdjn Uhfijrb Two rows of stops: Yes Number of consoles: 8 Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 200 m³/h Special workpiece clamping system: Clamps for beams Safety device: Bumper Chip conveyor: Yes Interface for .dxf data: Yes Remote control: Yes Control: PC control Software: MASTERWOOD MASTER 3D, MASTERWOOD MASTERWORK, MASTERWOOD MASTER AT Conformity marking: CE mark Total connection: 54 kW Weight: 6.500 kg Space requirement Length: 9,03 m Space requirement Width: 5,55 m Space requirement Height: 3,16 m

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm Cslnjvu Hfqe Uhfierb > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: slat conveyor > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: Note on used tools: We currently have used Gold...

Condition: ready for operation (used), Year of construction: 1992, Additional Equipment Center Guide (Roller Conveyor) to Support Wide Workpieces Existing Tools for the Machine Included Cjln Uhjwdy Ucsfisrb This HOMAG WEINMANN FLO 23 double sided edgebander was manufactured in 1992. Ideal for efficient edgebanding processes, it represents a practical addition to any woodworking shop. Contact us for more information. Application Types Edge Banding

Condition: excellent (used), Excellent condition Intermediate filter with rotary valve Ring line to the silo Fan 30 kw 10,050 m3/h Soundproof box 400 mm intake pipe Creln Uhfjwfgaujisb

Condition: new, Year of construction: 2024, Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Coln Uhfjd Nm Sijierb Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: not inspected (used), Year of construction: 2009, Wide Belt Sander Format4 Finish1302 Year of manufacture 2009 Touch display Sanding height approx. 3 - 170 mm Sanding width approx. 1300 mm 2 sanding units (individually controllable) Air cushion Program storage possible 22 kW motors (2 motors - separate for each belt!) Weight approx. 2.3 tons Only solid wood or veneer was sanded - no painted surfaces or anything else! Colnjwdplds Uhfisrb Instruction manual and key included! Shipping available upon request for an additional charge! Machine can be inspected! By appointment! Location: ex warehouse, 54634 Bitburg - available immediately - Sold without warranty - without guarantee - free shipping -

Condition: used, Year of construction: 2002, Number of saw blades: 1 Vertical saw blades: 1 Roller diameter: 940 mm Number of feeder rollers: 1 Saw blade width max: 80 mm Saw blade length max: 6.580 mm Passage height max: 560 mm Opening width: 910 mm Main motor power: 5,5 kW Type: left-side machine Saw blade: Vertical Feed rollers: Vertical Roller guidance top: Yes Roller guidance bottom: Yes Electrical feed: Yes Declaration of CE-conformity: Yes Conformity marking: CE mark Creln Uhewfraysfieb

Condition: used, Ganner Selekta 252 TR dowel insertion machine for automatically gluing and driving round dowels into prepared holes. The machine is ideal for efficient dowel joints in furniture and cabinet construction and offers high repeatability in series production. Dowel diameter: 8 mm Csln Uewd Iiuohfijrb Dowel length: 20–50 mm

Condition: used, Kuper FWM-630 ST Model Kuper FW/Mini 630 ST incl. mobile under-table Year of construction Crolnorrf Scj Uhfieb Stand projection 630 mm Feed approx. 7 m / min. Drive electric motor 25 Watt / 230 V Heating head approx. 75 watts

Condition: excellent (used), Year of construction: 2003, operating hours: 601 h, Functionality: fully functional, total length: 5,300 mm, workpiece height (max.): 42 mm, total width: 900 mm, edge thickness (max.): 3 mm, total height: 1,300 mm, overall weight: 2,100 kg, compressed air connection: 6 bar, working height: 800 mm, power: 12.5 kW (17.00 HP), input current: 400 A, Method of operation: hot melt adhesive, hot-cold process on one side in right-hand version. Edging thickness: 0.2 - 12 mm Workpiece dimensions: Minimum width 70 mm Minimum height 8 mm Maximum height 42 mm Minimum length 160 mm strip edges 60 mm edges endless from the roll 150 mm with double cutting device Operating voltage: 400 volts, 50 Hz Crsln Uhsvygu Nofiob Throughput speed: 12 m/min. Glue application: via application roller Working height: 800 mm Air connection: 6 bar 1/4" Extraction connection: 1 central extraction nozzle, diameter 160 mm Machine dimensions: Machine height: 1300 mm Machine width: 900 mm Machine length: 5300 mm Machine weight: 2100 kg Total connected load: 12.5 kW Machine equipped with: - Double roller top pressure with electronic positioning. - Individual feed for strip and solid edges. - Automatic roll magazine for rolls up to 800 mm in diameter with pneumatic cutting device up to 3 mm thick. - Rapid heating tank for hot melt adhesive granulate. Heating time 8 min. With electronic temperature control. - Automatic reversal of the glue dosage (same and opposite direction for thin or solid edges via PLC. - Automatic infeed ruler, therefore no manual adjustment work required for edge thickness. - Control All units can be pneumatically controlled from the central control panel networked with the PLC. Any faults are immediately displayed in plain text on the control panel (e.g. lack of compressed air or triggering of a motor protection switch). High operating comfort thanks to modern and practical control in the human-machine dialogue. Program memory with name and number program. JOINING PROCESSING PART - for joining chipboards with 2 HF motors 1.5 kW, 12000 n, working in parallel and counter-rotating, automatically controlled incl. DIA MAX DIA joining set diameter. 85 x 30 x 42, Z 3 LEUCO system for panel thicknesses up to 42 mm DOUBLE CROSS-CUTTING DEVICE - with 2 HF motors 0.3 kW, 12,000 n 2 automatic positions = 0 + 3 degrees 2 HM saw blades 140 x 3.2 x 16 mm, Z 36 FLUSH MILLING DEVICE - for flush milling solid edges and pre-milling plastic and veneer edges. One-sided scanning With 2 HF motors 0.43 kW, 12,000 n 2 HM reversible insert heads 70 x 20 x 16 mm, Z 4 FINE MILLING DEVICE - with 2 HF motors 0.3 kW, 12,000 n, two-sided scanning, automatic control. With quick-change device for upper and lower longitudinal milling of radii Tool: 2 pcs. AT 73 - HM - rounding cutter heads Diameter 73x16x16 mm, Z 3, for profile cutters R2 - R5 DRAWING BLADE DEVICE - two-sided scanning, automatic control. For stripping rounded PVC and plastic edges. CORNER ROUNDING DEVICE - with 2 motors, 0.35 kW 12000 n, 200 Hz, two-sided scanning, 1 work spindle each for top/bottom with 2 radius cutter heads AR 73, 73 x 16 x 16, Z 3 (for profile cutters R 2 - R 5)

Condition: used, Felder Format 4 Kappa 450 sliding table saw Heavy-duty precision sliding table saw Scoring unit 5.5 kW motor Saw blade tiltable from 90° to 46° Electric angle and height adjustment Saw blade diameter up to 450 mm Trimming length 3200 mm Cutting width with parallel stop 1200 mm Crjln Uhfswgalasiob Year of manufacture 2005 CE-certified version Machine from carpentry liquidation/retirement in VERY GOOD CONDITION from carpentry shop

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) Celn Ujwdny Tjhfierb - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale

Year of construction: 2019, Condition: used, Element length max: 12.000 mm Element width max: 3.800 mm Element thickness max: 500 mm Moulding aggregates: 1 C-axis: Yes 5-axes technology: Yes HOMAG Flex 5 interface: Yes Main motor power: 18,5 kW Tool changer: Yes Tool changer positions: 12 Saw aggregate: Yes, C-axis Framing station: Yes Number of tables total: 2 WEINMANN BUILDTEQ A 550: Yes WEINMANN BUILDTEQ A 570: Yes Outfeed table: Set-up table Reversing table: Yes WEINMANN SCHMETTERLINGSWENDER: Yes Scribing: Yes Crolev S D D Sen Uhfijb Workpiece probing: Yes Arrangement: Horizontal Control: Homag powerTouch, HOMAG POWER CONTROL PC 86 Software: SCHULER MMR PROFESSIONAL, HOMAG WOODSCOUT, WEINMANN WUPEDITOR, WEINMANN WUPVIEW, WEINMANN WUPWORKS, MICROSOFT WINDOWS 7 Conformity marking: CE mark

Condition: used, Year of construction: 1975, used hole line drilling machine Model Scheer DB 20 table size 1400 x 630 mm 1 drill beam a 21-spindle, 32 mm pitch height adjustment 40-100 mm Spindle distance max 640 mm, Working length 700 mm per cycle by moving the workpieces max. 2656 mm throat 550 mm Motor 1.8 KW 1 stop rail with immersion stops Cjln Ujri R Hashfierb Weight approx. 240 kg

Condition: used, Hebrock K34 PLC control with 15" touchscreen Pre-milling unit for joining before the gluing part (3 mm) Glue pot with removable pot and glue outlet device Max. edge height 60 mm Cross-cutting unit Milling unit for flush/radii/bevel trimming Corner rounding unit for radii/bevels Colswgakcen Uhfierb Multi-radius scraper (R1/R2) Nesting Surface scraper Release agent spray device Year of manufacture 2023, 52 operating hours Machine is in mint condition From carpentry liquidation / retirement from carpentry

Condition: used, Year of construction: 2016, Working dimension X: 3.100 mm Working dimension Y: 1.560 mm Working dimension Z: 170 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 13,2 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis BIESSE Torque C-axis: Yes Tool clamping system: HSK-F63 Tool changer positions: 22 Disc tool changer: Yes Pickup tool changer: Yes Vertical drilling spindles: 10 BIESSE Drilling aggregate BH 10: Yes Gantry machine: einseitig angetrieben Machine table: Matrix table Pendulum machining: Yes Multi-zone vacuum: Yes Vacuum pump: Yes Croln Ujv A Ainohfisb Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Suitable for nesting: Yes Labelling: Yes, manually Safety device: Light barrier, Bumper Interface for .dxf data: Yes Tool charge measurement: Yes Automatic lubrication: Yes Control cabinet cooling: Yes Remote control: Yes Control: BIESSE BH 660 Software: BIESSE B_SOLID Conformity marking: CE mark, EAC mark Total connection: 23 kW Weight: 3.600 kg

Condition: good (used), Year of construction: 1994, Slot boring machine JAGO B4 PN TR Year of manufacture 1994 Locking device for dowel and row drilling Pitch 16,22,25,32 mm Compressed air eccentric clamp Line laser Table top height 860 mm Table top size 580 x 300 mm Table top rotatable Drill chuck clamping range 1 - 20 mm Drill length 200 mm Max. drilling depth 150 mm Height adjustment range 200 mm Pneumatic lifting of the drill motor for 2 levels via manual valve Longitudinal and lateral stops Adjustable miter fence Motor power 2.2 kW Voltage 400/50 V/Hz Speed 1500/3000 rpm Space requirement 1295x1180 mm Net weight approx. 230 kg Crjln Ujubymiohfiob

Condition: used, Year of construction: 1997, Used Wegoma KS 2400 edge sander Year of manufacture: 1997 Motor power: 1.8 kW Motor speed: 1400 rpm Working length: 800 mm Belt width: 150 mm Belt length: 2400 mm Table size: 660 x 200 mm Additional table size: 420 x 400 mm Space requirement: 1450 x 1260 mm Csln Uhfewhd Nxoiorb Weight: 120 kg