Condition: used, Year of construction: 2016, Functionality: fully functional, 2016 Gannomat Concept 70 Eco Carcase Press. Machine in good working order and any demonstration can be arranged. Leg Extensions to raise the working height. Air-Jet table to ease movement of cabinets inside the press. Cjbusvygz Ns Sb Arerb Infeed / Loading table with rollers. Outfeed table with rollers. Fully adjustable pressure on both vertical and horizontal. Automatic timer for the pressure. 3 x speed adjustment on axis movement. The configuration of this machine allows the throughfeed process to be introduced increasing efficiency within your factory.

Condition: used, Lightweight edge sander Jet type EHVS-80 cs for precise sanding of straight and curved wood edges. The lightweight construction and powerful motor enable a consistent sanding pattern with high removal rates. Ideal for small carpentry shops, furniture construction, and interior design. sanding belt length: 2260 mm Sanding belt width: 150 mm table: Pivotable Crjbewffpbeu Sb Arsb engine power: 1,5 kW Suction nozzle: 100 mm

Condition: good (used), Year of construction: 2010, Functionality: fully functional, Holzma HPP 350/43/43 panel dividing saw in good, fully functional condition. The machine will be in operation until the beginning of July and can also be inspected while powered up. Cutting length: 4300 mm Cutting width (program slide travel): 4250 mm Roller rail (10-track element): 1 piece Crobjv I S Auou Sb Areb Roller rail (2-track element): 5 pieces Collets: 7 pieces 4 air cushion tables Technical specifications: Saw blade projection: 80 mm Saw carriage feed: forward 1-130 m/min, reverse constant 130 m/min Automatic cutting height adjustment; Angle clamping device, minimum clamping width: 0 mm; Maximum cutting width, complete cutting length Space required: 640 x 740 cm Main saw motor: 13.5 kW Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Connected load for 13.5 kW HS motor: 20 kW CADmatic 4.1 Professional control system with 19-inch flat-panel display with touchscreen function

Condition: used, Tenoning spindle 1 St Number of milling agregates 3 St. Spindle diameter 50 mm Gubisch type EST-H 2000/2 ----- !Machine still in use and can be viewed! Including Aigner tools built 2010: IV68/78/88 wood-wood-aluminum Eurofold + 4mm rebate clearance Manufacturer description: ----- one-sided angle combination for window and door production consisting of tenoning and slotting machine, angle transfer and milling machine Crosscut saw: ----- P = 3 kW U = 3000-1 Saw diameter: 400 mm Flange diameter: 80 mm Adjustment: horizontal: man. adjustable, readable from mechanical digital display Adjustment range: 0-120 mm Length stop LAS ----- Adjustment: manual Length: extended to 3.2 m Slotting unit (cross machining) ----- P = 9.2 kW U = max. 4500 depends on your tools and is adjusted accordingly Clamping height: 300 mm Useful height: 300 mm Shaft diameter: 50 mm Largest tool diameter: 400 mm max., 240 mm min. Adjustment: vertical Adjustment range: vertical 210 mm under table Number of tools: 3 tool sets of 100 mm each provided by customer 0-height 10 mm Shortest workpiece: 320 mm + tenon Narrowest workpiece: 48 mm Widest workpiece: 170 mm 1. Profile spindle ----- Position of the spindle: vertical right Function: profile production and automatic synchronous immersion P = 9.2 kW U = 6000 rpm Clamping height: 100 mm Useful height: 100 mm Diameter: 50 mm Flight circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, tool 0-height 10 mm Number of tools: 1 a 100 mm clamping length max. 2. Profile spindle ----- Position of the spindle: vertical right Function: profile production P = 9.2 kW U = 6000 rpm Clamping height: 300 mm Useful height: 300 mm Diameter: 50 mm Flight circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-height 10 mm Number of tools: 3 at 100 mm clamping length max. Crsbsv Dmqrou Sb Arob 3. Profile spindle ----- Position of spindle: vertical right Function: profile production P = 9.2 kW U = 6000 rpm Clamping height: 300 mm Useful height: 300 mm Diameter: 50 mm Cutting circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-height 10 mm Number of tools: 3 at 100 mm clamping length max. 4. Profile spindle (glass bead saw unit) ----- Position of spindle: horizontal top, right P = 3.0 kW U = 3000 rpm Cutting circle diameter: 250 mm Clamping flange mount: 60 mm diameter Hydraulic adjustment: automatic up/down, forward/backward for 1 Basic height and 1 basic depth Other technical details ----- Clamping table slot unit ----- On ball guide bushing and roller guides Manual swivel range: 60 degrees in both directions Speeds: 0 - 28 m/min. continuously adjustable 4 speed ranges fast feed in front of slot unit slow feed in cutting area adjustable fast feed for transfer fast return Counter wood: counter wood changes automatically with spindle stroke Transfer type in profile area: occurs automatically Operating mode: individual part production, frame by frame Production and series production possible Longitudinal profiling -----...

Condition: used, Year of construction: 2020, Edgeband thickness max: 8 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece width min: 70 mm Feed min: 8 m/min Feedrate max: 14 m/min Continuously variable feed: Yes Cobovt Ewpou Sb Arerb Electromotoric height adjustment: Yes Glue system granulate: glue pot above feeding chain BRANDT Glue system QA 65N Gluing unit: Yes Quick-change glue pot: Yes Suitable for PUR glue: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 1 motor Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Suitable for nesting: Profile scraper, Bündig/Radius/Fasestationen Aggregates actuated by control: NC-axes Type: right-side machine Machine length: 5.530 mm PU rollers: Yes Control: Homag powerTouch Conformity marking: CE mark

Condition: good (used), Year of construction: 1992, Altendorf F 45 sliding table saw, built in 1992 Motor: 5.5 kW / 400 volts Cutting length: 2800 mm Cutting width: 1000 mm Pivoting up to 45° Cjbu Sbswhpngo Arjrb Speeds: 3, 4, 5, and 6000 rpm Max. saw blade diameter: 450 mm Max. cutting height: 155 mm Parallel guard Fine adjustment on the parallel stop Miter stop 800 mm aluminum table extension

Condition: used, machine/vehicle number: 006602, Position 1: Front-Loading Panel Saws BARGSTEDT + HOLZMA-HPP 380/43/43 Position 2: Automated Warehouse BARGSTEDT + HOLZMA-HPP 380/43/43 Crebuortup Rj Sb Arjb

Condition: used, knife: Centrolock reversible blade Z2 Cobuewffm Hs Sb Arorb flight circle (ø): 93 mm admission: PowerLock HSK length: 240 mm material: steel

Condition: like new (used), Kaeser with attached dryer, 8 bar, 2017 with maintenance history and documents. 13000 hours total Crsbu Sbewhgczj Areb

Condition: excellent (used), Year of construction: 1999, Mobil Jet Crebu Sbswdvr De Arob Year of manufacture 1999 2.2 kW Intake manifold 120 mm

Condition: used, Year of construction: 2023, Number of axes: 6 Cebov S I Nlou Sb Arerb Tool diameter max: 320 mm Infeed from magazine: Yes Electrode: Disc Conformity marking: CE mark

Condition: excellent (used), Catalog number: 7641 ADVANTAGES – the best wide planing machine for wet and dry wood – ideal for processing logs, flooring, etc. – 3 planing shafts + 3 spindles – manufactured by the German brand KUPFERMUHLE – used planer, very good condition TECHNICAL DATA max planing width 800mm max planing height 200mm from above: input pulling shaft, toothed + pawls + pressure + 2 pulling shafts, toothed + pressure + planing shaft 800mm, 4-knife 7.5kW pressures + profiling shaft 800mm, 4-knife (3 straight knives, 1 profile knife installed) + pressure + pulling shaft, smooth, output + from below: guide strip + input table + pulling shaft, smooth + planing shaft 800mm, 4-knife 7.5kW 2 pulling shafts, smooth + smooth, sliding, divided roller + side pressure at the outlet + at the back: 2 side spindles + pressures: 1) vertical right 90mm 4kW 2) vertical left 90mm 4kW spindle diameter 35mm spindles set alternately + spindles adjustable up/down, right/left + 3) additional horizontal lower spindle 350mm, adjustable up/down + right/left 5.5kW spindle diameter 40mm at the outlet: 4 upper metal sliding rollers, 2 lower pulling rollers, rubber + adjustable rollers in the lower table + Cobu Sewfti Ajb Arorb 6 types of feed speed 7/14/9/18/11.5/23m/min 2.2kW feed motor 3×180, 130mm exhaust port diameters 3100x2000x1900mm length/width/height dimensions 3500kg weight Net price: PLN 64900 Net price: EUR 15270 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Year of construction: 1986, Scheppach spindle moulder hf 33 Built in 1986 Including sliding table Table size 610 x 450 mm; Table height 880 mm Crobu Sbewhiuyj Arjb Spindle diameter 30 mm; Speeds 3,000 / 6,000 / 9,000 rpm; Motor 400 volts / 3.0 kW; Extraction nozzle 100 mm

Condition: used, knife: WP Z4 V4 Cebjwffk Esu Sb Arorb flight circle (ø): 160 mm drilling: 40 mm length: 8-15 mm material: steel Labelling: BG test

Condition: new, Year of construction: 2025, operating hours: 8 h, Machine in pre production *planned to be ready appr. end of may 2025 Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Crebu Sboxfwds Areb Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), Year of construction: 2011, working width 430mm Cebu Sbjn Arm Eo Arorb max height 100mm outfeed conveyor 3500mm variable regulated brushes speed variable regulated rolls speed year 2011

Condition: used, Year of construction: 2014, Edgeband thickness max: 12 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 200 mm Workpiece width min: 150 mm Feed min: 14 m/min Feedrate max: 20 m/min Continuously variable feed: Yes Crsbowftqasu Sb Arsb Electromotoric height adjustment: Yes Top pressure by belt: Yes Glue system cartridge: Yes IMA Glue system 283.203 PUR Quickmelt: Yes Quick-change glue pot: Yes Suitable for PUR glue: Yes PUR Aufschmelzeinheit: interner PUR-Aufschmelzer Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes IMA Premilling unit 08.380: Yes Preheating zone: Yes Andruckzone NC-gesteuert: Yes Trimming saw: 1 motor IMA Trimming saw 08.42: Yes Flush/radius/chamfer milling units: 1 IMA Fine milling unit 08.0561: Yes Corner rounding unit: 4 motors IMA Corner rounding unit SKF Contour trimming unit: Yes Nutfräsaggregat: Yes IMA Universal milling aggregate 08.190: Yes Scraper unit: Profile scraper, Flat scraper IMA Profile scraper unit 08.519: Yes IMA Flat scraper unit 08.521 Duplex flat scraper: Yes Buffing unit: Yes IMA Buffing unit 08.617-2: Yes Aggregates actuated by control: NC-axes Type: left-side machine Machine length: 8.600 mm IMA Workpiece infeed 63.152 Infeed table: Yes Control: IMA ICOS TS Software: BECKHOFF TWINCAT Declaration of CE-conformity: Yes Conformity marking: CE mark Weight: 3.600 kg

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: slat conveyor Cebu Sb Asvu Hfqorerb > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: Note on used tools: We currently have used Gold...

Condition: good (used), Year of construction: 1991, Scheppach spindle moulder hf 3000 Year of manufacture 1991 Table size 615 x 450 mm Table height 870 mm Finely adjustable router stop Spindle diameter 30 mm Max. tool diameter 200 mm Speeds 3,000 / 6,000 / 9,000 rpm Motor 400 volts / 3.0 kW Right/left rotation Extraction nozzle 100 mm Crebu Sbewhiume Arob Bracket for sliding carriage Chassis Various accessories

Condition: used, knife: Centrolock reversible blade Z2 Cebu Sb Ajwffkljrerb flight circle (ø): 93 mm admission: PowerLock HSK length: 100 mm material: steel

Condition: new, Year of construction: 2024, Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil Cjbjd Nm Sisu Sb Arerb * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: ready for operation (used), Year of construction: 1992, Additional Equipment Center Guide (Roller Conveyor) to Support Wide Workpieces Existing Tools for the Machine Included Crebu Sjwdy Uceb Areb This HOMAG WEINMANN FLO 23 double sided edgebander was manufactured in 1992. Ideal for efficient edgebanding processes, it represents a practical addition to any woodworking shop. Contact us for more information. Application Types Edge Banding

Condition: used, Year of construction: 2017, Working dimension X: 5.400 mm Working dimension Y: 1.900 mm Working dimension Z: 350 mm Independent Z-axes: 2 Number of milling spindles: 1 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 24 Disc tool changer: Yes Pickup change place: Yes Vertical drilling spindles: 22 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Stop for top layer protrusion: Yes Workpiece support aids: Yes Two rows of stops: Yes Number of consoles: 8 Csbu Sbswfrbdo Arorb Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 200 m³/h Special workpiece clamping system: Clamps for beams Safety device: Bumper Chip conveyor: Yes Interface for .dxf data: Yes Remote control: Yes Control: PC control Software: MASTERWOOD MASTER 3D, MASTERWOOD MASTERWORK, MASTERWOOD MASTER AT Conformity marking: CE mark Total connection: 54 kW Weight: 6.500 kg Space requirement Length: 9,03 m Space requirement Width: 5,55 m Space requirement Height: 3,16 m

Condition: used, Year of construction: 2002, Number of saw blades: 1 Vertical saw blades: 1 Roller diameter: 940 mm Number of feeder rollers: 1 Saw blade width max: 80 mm Saw blade length max: 6.580 mm Passage height max: 560 mm Opening width: 910 mm Main motor power: 5,5 kW Type: left-side machine Saw blade: Vertical Feed rollers: Vertical Crobewfrayju Sb Arsb Roller guidance top: Yes Roller guidance bottom: Yes Electrical feed: Yes Declaration of CE-conformity: Yes Conformity marking: CE mark

Year of construction: 2019, Condition: used, Element length max: 12.000 mm Element width max: 3.800 mm Element thickness max: 500 mm Moulding aggregates: 1 C-axis: Yes 5-axes technology: Yes HOMAG Flex 5 interface: Yes Main motor power: 18,5 kW Tool changer: Yes Tool changer positions: 12 Saw aggregate: Yes, C-axis Framing station: Yes Number of tables total: 2 WEINMANN BUILDTEQ A 550: Yes WEINMANN BUILDTEQ A 570: Yes Outfeed table: Set-up table Reversing table: Yes WEINMANN SCHMETTERLINGSWENDER: Yes Scribing: Yes Workpiece probing: Yes Arrangement: Horizontal Control: Homag powerTouch, HOMAG POWER CONTROL PC 86 Software: SCHULER MMR PROFESSIONAL, HOMAG WOODSCOUT, WEINMANN WUPEDITOR, WEINMANN WUPVIEW, WEINMANN WUPWORKS, MICROSOFT WINDOWS 7 Cobu Sov S D D Ssb Arorb Conformity marking: CE mark