Condition: used, With hand lever operation. Safety step bar. Press dimensions: 2200 x 1100 mm. Total pressing pressure: 65 tons. Press chamber height: 350 mm. Number of cylinders: 4 (80 mm diameter). Specific pressure at full capacity: 2.7 kg/cm². Specific pressure at 2 m² capacity: 3.25 kg/cm². Electric heating plates. Duolqxx Nowaywveqst Storage location: Supplier.

Condition: good (used), Code: 0100 Delqewd Rwboxx Nqsut Brand: MASTERWOOD Model: OMS 4MM - CE Standard Chain and lock mortising machine for all types of lock housing, for wooden doors, window frames , furniture, shelves - CE Standard Aggregate with 2 horizontal milling cutters for simultaneous execution of key slot and handle hole Max depth of cut mm 150 Max length of cut mm 330 Transversal stroke mm 80 Max working height for doors mm 1000 Vertical worktable stroke mm 250 Mortising machine motor power output Kw 3 Vertical unit motor power output Kw 0,55 Horizontal unit motor power output Kw 1,84 Suction port diameter mm 120 Overall dimensions mm 1400 x 950 x 2100 h Weight kg 850

Condition: used, machine/vehicle number: 007838, X axis working area: 6700 mm Y axis working area: 1600 mm Working Table: Pod and Rail Delqxx Nov Sf Irsqeut Main Electrospindle power: 30 KW Total number of tool changer positions: 44

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Duelev Sthgjqxx Nqot Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), ROBLAND LX31 5-axis combination machine with feed and mobile dust extraction Plenty of accessories!!! Very little use!!! Planer and thicknesser Planer width: 310 mm Planer height: 230 mm Cutter with 3 knives Planer table length: 1400 mm Cutter diameter: 70 mm Cutter speed: 5200 rpm Stop: pivoting: 90°-45° Mechanical thickness indicator Feed speed 6 m/min Max. chip removal 5 mm Working height 850 mm Motor power 3 kW Saw Sawblade tilt angle 90°-45° Carriage length 1360 mm Extension table with roller arm 850 x 450 mm Cutting width on the right 450 mm Sawblade speed 3300 rpm Cutting height 85 mm with a 315 mm sawblade Spindle diameter 30 mm Table size 850 x 450 mm 3 kW motor Mill Mill spindle 30 mm Max. tool diameter 180 mm Spindle height adjustment 140 mm Spindle clamping length 125 mm Table opening 200 mm Mill spindle speeds 3000 and 6000 rpm. Mill stop 3 kW Motor Table size 800x450mm Mortise drill Chuck clamping range 0-16mm Max. drilling width 165mm Max. drilling depth 140mm Height adjustment 85mm General: The machine has three motors, each with a power of 3kW. 3-roller feed unit, new and unused!!! Extractor with fine dust filter 0.75kW Chassis Working height 850mm Weight 680kg Accessories: Saw blades: 3 pieces New planer knives Set of new drill bits Rebating head Universal milling head Knife setting gauge Delowg Slfjqxx Nqout Milling arch cover Operating manual

Condition: used, (Customer order) Automatic splitting machine for the production of parquet and slats With three units, total connected load 70 kW Min. strip length approx. 200 mm Max. strip width 40-100 mm Max. thickness 80 mm Feed speed 15-40 mm Dslqxswcn Emox Nqeut

Condition: used, Year of construction: 1999, Max. cutting width: 4300 mm Max. cutting height: 2200 mm Sawblade diameter: 300 mm Max. processing thickness: 80 mm Sawblade bore: 30 mm Measuring system: scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Approx. weight: 1200 kg Dimensions: 5300 x 1200 x 2900 mm Motor power: 5.5 kW Storage location: Nattheim Duolqxxjwa Dqgo Nqet

Condition: good (used), Code: 0099 Brand: HOFMANN - GERMANY Model: TFS 1245 - CE Standard Automatic spindle moulder with spindle tilting +/- 45 degrees with extended table - CE Standard - Year 2008 Sturdy structure with cast iron table Table size mm 2050 x 815 Extractable support extension for large workpieces Spindle diameter mm 50 Spindle tilting +/- 45 degrees Motor power Kw 4,7 - 6,3 Spindle speed 3000/4000/5000/6000/8000/10000 rpm with display Electric spindle lift with display Electric spindle tilting with display Reversing spindle rotation Dolqxx Nswd Ityjqjut Adjustable spindle moulder fence with displacement visualised by mechanical numerators Hanging control panel Aigner accident-prevention guides Spindle protection Arrangement for feeder 2 Suction ports diameter mm 120 Overall dimensions mm 2050 x 1250 x 1850 h Weight kg 900

Condition: reconditioned (used), Year of construction: 1998, Fully automatic package jointing line 500 mm Packaging width - Consisting of: - Finger jointing Central Milling Machine - 2 fixed transport tables - 1 Wheeled processing unit - 2 milling spindles - 2 flakers - Glue - Separating station with tilt-back - Threading section 2 transport chains - Feed with double rollers - Extrusion press 12 ton - crosscut - Packaging width 500 mm - wood in max. 1950 mm - wood in min. 200 mm - Workpiece 50-215 mm - Workpiece thickness of 25 to 100 mm - Performance 2,5- 3 tables / min Dusljlatv Aeqxx Nqst - Press force max. 12000 kp - Length of the threading section 3900 mm - Lenght of the press bed 5000 mm - wood with fingerjoint endless - Engine performance milling spindle 2x18,5 kW - Engine chipper 2x 7.5 kW

Year of construction: 2021, Condition: excellent (used), Wood dryer by Italian company BIGonDRY 3 chambers - each: - width 9.6 m - length 7.5 m - gate height 4 m Duelevkxmfsqxx Nqjt Input of one about 100 m3 - total 300 m3 Dryers used only for tests - practically new. Complete with full documentation, automation, laptop and internet connection (remote control).

Condition: excellent (used), Year of construction: 1996, Feeder, circular saw feeder for sliding table saws For cutting moldings, window scantlings, trimming ABS edges, etc. Attaches to the circular saw stop Dolqxxswcyvws Nqeut Motor 0.14 kW, 380 volts Two feed speeds: 13 + 16 m/min Integrated electric safety magnet system secures the feeder to the saw table with an electromagnet Quick adjustment of the workpiece height via handwheel Rubberized feed rollers slightly sawn, but still usable Max. workpiece height approx. 80 mm Minimum workpiece length approx. 200 mm Extraction connection Original paint, only slightly touched up CE mark With mobile wooden transport box The mounting rail is 41 x 21 mm, internal dimensions 31 x 11 mm, groove width 13 mm Adaptable to many sliding table saw manufacturers, but other adapter rails are also available Panhans Weight approx. 30 kg The machine can be demonstrated on-site by appointment. We only offer machines that are in stock and ready for demonstration; see "Other offers from this supplier."

Condition: used, Model making machines Including over 100 canvas belts Including 11 profile sanding rods Used, excellent condition, little used Make: Zimmermann Dolqswhqxaexx Nqsut Type: PS 1 Extraction connection diameter 80 mm Space requirement approx. 1000 mm x 600 mm x 1800 mm Weight approx. 400 kg Storage location: 97447 Gerolzhofen, free on freight, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: used, Precise angles and miters from 0° to 46°, with digital display for degree indication Duolqowhzg Uoxx Nqjt Storage location:

Condition: good (used), Code: 0098 Brand: MINIMAX SCM Model: LS 3000 - CE Standard Belt sanding machine with double goose neck - with 3 motors - CE Standard Table length mm 3000 Table width mm 1100 Automatic table lifting stroke mm 580 2-speeds belt motor Sanding belt lenght mm 8100 Pulleys diameter mm 250 Belt width mm 150 Manual pad mm 150 Gooseneck depth mm 820 Overall dimensions: mm 4150 x 1500 x 1600 h Duolqxxjwd Hafe Nqet Weight kg 485

Condition: used, Year of construction: 2019, Edgeband thickness max: 8 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece width min: 70 mm Feed min: 8 m/min Doleuxqvxsqxx Nqout Feedrate max: 14 m/min Continuously variable feed: Yes Electromotoric height adjustment: Yes Glue system granulate: Premelting unit BRANDT Glue system QA 65N Gluing unit: Yes Quick-change glue pot: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 HOMAG Fine milling unit MS 40 Multistage trimming unit: Yes Corner rounding unit: 1 motor Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: right-side machine Machine length: 5.100 mm BRANDT Automatic edge feeding device: Yes Infeed barrier: Yes Control: Homag powerTouch Declaration of CE-conformity: Yes Conformity marking: CE mark

Condition: used, Year of construction: 2007, Functionality: fully functional, Cutting width 4300 mm (4450 mm) cutting depth 2600 mm cutting height 150 mm Dolqowg Avzoxx Nqsut back loaded + rotation table + air cushion table at cutting line motor 18 kw sawblad Ø520 mm scorringblade Ø200 mm 12 pcs grippers on the pusher MACHINE AVAILABLE FROM WEEK 46/2025

Condition: excellent (used), Year of construction: 2010, Automatic technological line for sawing wood Technical data: - Max wood diameter 400 mm - Minimum wood diameter 120 mm - minimum timber length 1500 mm - Max log length 3200 mm Delqelar Rijxx Nqjut CAPACITY UP TO 200 m3 per shift The machine consists of the following elements: - Log loader - Sawmill longitudinal feeder - Sawmill TT 5/600/400 G - Motors 75 + 90 kW - Receiving roller table with ejecting mechanism for edgings and side boards - Driven roller table - Base table SB 4000 - Multi-saw WP 210 - 2 x 75kW engines - Receiving table - Lower return conveyor of edgings, waste to the chipper The machine is in good condition, in continuous operation - the possibility of viewing during operation

Condition: used, Year of construction: 1986, From a model shop Used, excellent condition, little used Make: Panhans Duolqxswhqw Nex Nqjt Type 325 Year of manufacture: 1986 GS-tested Motor: 4.0 kW Top control panel Planing width: approx. 510 mm Infeed table length: approx. 1600 mm Removal table length: approx. 1150 mm Auxiliary stop Slotted/low-noise table lips Number of knives: 4 Blade system: Strip planer knives Chip thickness indicator Hollow-pointed joint Automatic brake Hollow-pointed joint adjustment Extraction connection: 140 mm diameter Space required: approx. 2800 mm x 800 mm x 1200 mm Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: used, Year of construction: 2022, Special price exhibition machine Garbsen edge banding machine K36 pcs. POWERFUL AND ROBUST. This Hebrock long-runner offers unimagined possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in daily work. With the option of equipping the machine with a step cutter and a multi-radius scraper, Hebrock sets new standards in the field of perfect edge processing of a wide variety of edge thicknesses. TECHNICAL PROFILE - Max. edge thickness up to 3 mm (optionally 8 mm) - Min. / Max. workpiece thickness 8-60 mm* - Min. workpiece length approx. 200 mm* - Min. workpiece width approx. 80 mm* - Feed speed approx. 7/10 m/min - Ready for operation in 6 minutes - Optional multi-tools - Weight 1700 kg - Extraction nozzle for jointing machine 80 mm - Extraction nozzle for main extraction (rear of machine) 140 mm - Air consumption standard machine approx. 300-400 l/min - Air consumption airtronic machine approx. 600-800 l/min THE BASIC EQUIPMENT - PLC control with touchscreen 10- Optical display for workpiece sequence- Pre-milling- Top-mounted hot melt adhesive container (interchangeable tank design / maintenance-free) with adhesive outlet device- Cross-cut saw- Milling unit- Corner milling machine- Radius scraper- Surface scraper- Cleaning station- Tools- Chip collection box (cross-cut saw)- Transport chain with permanently bolted special chains- Ball-bearing double roller top pressure- Boom (extendable to the front)- Unit viewing window from the rear of the machine and the operator's sideJoining stationWhispercut joining system with exchangeable dimensions: ø 100 x 43 mm Optional: ø 100 x 63 mmMotor power: 2 x 2.2 kWSpeed: 12,000 rpmMax. joining depth 3 mm - up to workpiece height 40 mmMax. Joining depth 2 mm - for workpieces over 40 mm. Optimal cutting edge utilization through separate manual height adjustment of the joining heads. ADVANTAGE - No more resharpening of the heads, only replacing diamond cutting edges. - No more readjustment in the machine necessary. - Only one set of joining heads required. - Lightweight aluminum construction makes it easier on motors. - Height adjustable for optimal cutting edge utilization. Glue pot interchangeable design. The proven Hebrock glue pot technology includes: - Peak heating times of the glue pot; your machine is ready for operation within 6 minutes! - A special Teflon coating, making cleaning your glue pot child's play. - Convenient and easy changing of your glue pot, thanks to quick-release fasteners on the electrical and pneumatic components, so a change is possible in under a minute. - Filling capacity 1 kg. Glue changing device. The glue changing device integrated in the machine makes changing glue types or colors easy. Simply press the button stored in the program to heat up to reach the outlet temperature, then Manually open the outlet using a slider and let the glue pot drain. Then refill the glue pot with new granules and achieve perfect results. Pressure zone: These 4 pressure rollers exert optimal pressure on the glued edge thanks to their spring-loaded mounting. Thanks to their coating, they are also easy to clean from adhesive residue or dirt. The stable construction of the mitre saw with linear guides enables precise sawing of the workpiece. Front and rear power: Version: 1 x 0.37 KW, speed 12,000 rpm. Milling station: This all-rounder in the field of edge processing offers the option of switching between the processing methods: radius / cha Duslqewhwp Ssxx Nqot

Condition: used, Year of construction: 2003, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2003 - Documentation available: No - CE mark available: Yes - Serial number: 03/1792 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dolqewcgcwjxx Nqsut Glenn Smeets

Condition: excellent (used), Year of construction: 1993, Functionality: fully functional, filter area: 73 m², type of input current: three-phase, volume flow: 5,298 m³/h, intake manifold diameter: 250 mm, nominal power: 5.5 kW (7.48 HP), Schuko Bagging System Year of manufacture: 1993 Number of fans: 1 Main motor: 5.5 kW, 12 A, 380 V Flow rate: 5298 m³/h Dolqxxswhx Dko Nqout Speed: 2880 rpm Filter area: 73 m² Filters: 40, 230 mm diameter, 2000 mm length Automatic shaking system - fire hose connection Including documentation and control system Tap nozzle diameter: 250 mm Including piping

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: LX250/011/2022, USED ONLY ONCE! Wood-Mizer LX250S3EH20S-ESW Double Rail Sawmill Power: 15 kW Electric Max. log diameter: 140 cm Max. cutting width: 138 cm Max. cant width: 125 cm Max. cutting depth: 27 cm Duolqjwhxl Ioxx Nqst Head functions and options Setworks: SW10 Head up/down: Electric (chain) Head forward/reverse: Electric (2 x 0.75 kW) Blade guide arm: Electric Blade lubrication: Electric valve Blade tensioning system: Hydraulic tension handle with pressure gauge Debarker: N/A Sawdust collection opening diameter: 150 mm Blade Length: 5460 mm Width: 32 - 35 mm Blade wheels Diameter: 473 mm Type: Belted Idler wheel material: Cast iron The modular bed Consists of three sections (1.85 m each) with a total length of 5.55 m and the option of further extension for sawing longer logs. The logs are securely fastened to the bed with three side supports, two manual clamps, and several raised cross-bed sections, allowing for easy loading with a forklift.

Condition: used, Year of construction: 1986, From a model workshop Used, excellent condition, little used Make: Panhans Type 426 Year of manufacture: 1986 Machine No. 670 GS-tested Powered motor: 7.5 kW Planing width: approx. 630 mm Dolqewhqw Aexx Nqsut Planing height: approx. 250 mm Adjustable table guide rollers Linked pressure beam Steel feed roller Feed rate: 7-14 m/min Number of knives: 4 Knife system: Strip planer knives Digital display for planing height Electric height adjustment with handwheel fine adjustment Extraction connection diameter: 160 mm Space required: approx. 1200 mm x 1000 mm x 1400 mm Weight: approx. 1150 kg Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: used, Year of construction: 1977, Heavy-duty disc sander Model making machine Including approx. 20 sanding belts K 80 Used, excellent condition, little used Make: Zimmermann Type: SZ 1 Year of manufacture: 1977 Motor: 1.7 kW Right table: approx. 800 mm x 280 mm Tilts 30/45° Left table: approx. 800 mm x 280 mm Tilts 30/45° Double-sided Disc diameter: 600 mm Extraction connection: D 2x120 mm Space required: approx. 920 mm x 750 mm x 1300 mm Weight: approx. 500 kg Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in as-is condition, as seen Djlqxjwhqwvjx Nqjut Without warranty or guarantee

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Duslqsvxlq Hoxx Nqot Used, excellent condition, little used Make Altendorf Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Tabletop extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee