Condition: ready for operation (used), Year of construction: 2021, Brand: Flex-Trim Type: Stacksander Year of manufacture: 2021 Cob Hlmasv Hyf Ij Isgt Lifting system pmh Stock number: 2002445BXM

Condition: ready for operation (used), Year of construction: 2003, Brand: Burkle Model: SLC Machine no: 10362-02 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm Cjb Hlmajv Hw Hce Ijgt - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002442BXM

Condition: good (used), Year of construction: 2005, Functionality: fully functional, Brand: Cefla Model: Easy 2000D Serial no: 05079/6 Year: 2005 Renovated with: -New control PLC -New feed carpet -New bearings under carpet -New bearing at recovery Note:Available earliest mid May-2025 Cefla model D automatic sprayer for applying paint to boards and other flat workpieces. The machine with dry filter has 2 holders for spray guns. "Back spray" also enables the application of paint to edges. The endless belt allows leftover paint to be recycled. The most important parts of the machine: Air ventilation equipment Air purification system Paint supply and distribution system Gun drive system Endless conveyor belt Electronic control system Easy sprayer provides: High quality of painted objects, paint that does not hit the workpiece is recycled High production speed High utilization rate of paint Dimensions: 4840x3708x2900mm (lxwxh) NOTE: With reservation for incorrect technical data presented TECHNICAL DATA Control system ED-EASY2000 Max working width including edges 1300mm Max working thickness 70mm Air flow supply fan 10000m3/h, 3 kw Air flow exhaust fan 12000m3/h, motor 7.5kw Paint supply and distribution system Feeder belt speed 1.6-10.6 m/min Variator 1.1 kw Air pressure mat holder 3bar Cgjb Hlmaev Inqze Ist Compressed air consumption 50Nl/min Air pressure feed pump 6bar Air pressure gun spraying 1-4bar Air pressure gun nozzle 5-6 bar Spray gun holder Motor for operating guns 2 kw Spray gun speed 120m/min Sound level 77.5 db in operation Current: 400 volts, 50 Hz, 3 phases, total 18.1 kw, 40 A Maximum motor power 4 kw, 15.6 A

Condition: good (used), Brand: Striebig Model: Econom 520 6 E/G Machine no: 43941 Tech data: Horizontal saw length: 4250mm Cgjb Hlorh Dadoma Iot Vertical saw length: 2350mm Max sawing depth: 85mm Blade diameter: 300mm Motor: 3Kw, 50Hz, 400V, 3-phase Stock no: 2001739

Condition: ready for operation (used), Brand: Ayen Model: DB 1000 B23 Pneumatically controlled drilling machine Tech. info: Max opening: 820 mm Cjb Hlsri R H Eoma Isgt Working width: 720 mm Drilling depth: Horizontal 120 mm, vertical 80 mm Motor: 2,2 kW, 50 Hz, 380 V, 2800 RPM, 3-phase Machine size: 120x80x205 cm (lxwxh) Weight: 275 kg Stock no: 2001012

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Cgjb Hlmajtk It Sj Iot Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 1498, Brand: Rema Model: OWK 4/2 Machine no: 1498 Csb Hlmetxmzkea Ijgt Mobile dust extractor New filter bags and new wheel-set. Tech. info: Capacity free flow 3300 m3/h Collection bags 330 m3dm Diameter of dust nozzle: 250 mm Motor: 2.2 kW, 50 Hz, 380 V, 3-phase Stock no: 2001803

Condition: good (used), Year of construction: 1989, Brand: Costa Model: 70 CT 1150 Machine no: CL8999 Year of manufacture: 1989 - With new carpet Tech. info: Working width: 1150 mm Sanding belt width: 1180 Sanding belt length: 2620 mm 2 units Contact roller Pneumatic sectioned sanding shoe Min/max workpiece thickness: 3/160 mm Working height: 740-900 mm Engine power 1: 15 kW Engine power 2: 11 kW Feed motor: 1.1 kW Table lift motor: 0.37 kW Contact roller diameter: 250 mm Contact roller belt speed: 20 m/sec Variable feed speed Cgeb Hlmotwplija Ist Compressed air min. pressure: 6 bar Compressed air consumption: 40 N1/min Air speed at extraction nozzles: 28 m/sec Diameter of chipboard: 150 mm Total 29 kW Electricity: 380 V, 50 Hz, 3-phase Weight: 1800 kg Stock no: 2001578BXM

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: AKV 88 D Cgoboq Ihxpo Hlma Ist Machine no: 569-P3 Year model: 2005 Tech data: Max edging thickness: approx. 3mm Max working height: 50mm Inner radius min: approx. 8mm Feed speed 0-7 m/min Warm-up time: approx. 6.5 min Motor: 9.3Kw, 50Hz, 400V Machine size (lxwxh): 1360x690x1220mm Weight: approx. 150Kg Stock no: 2001921BXA

Condition: ready for operation (used), Model: KAPRE 2500 Machine no: 463 Cgeb Hlmaoma Ayrj Iet Edge press for solid wood stripes Heat in the plate Max width of workpiece: 50 mm Length: 2500 mm Stock no: 2001658

Year of construction: 1972, Condition: ready for operation (used), Brand: Schmid Model: HSM Machine no: 64221 Year of manufacture: 1972 Tech info: Working width: 2700 mm Length of sanding belts: 8000 mm Ceb Hljm Udm Tjma Iegt Wheel diameter: 280 mm 2 sanding belts Motor: 11 kW, 50 Hz, 380 V, 3-phase Stock no: 2001583BXA

Condition: ready for operation (used), Length: 2000 mm Motor: 0.55 kW Stock no: 2002112 Cgob Hlmsthcfdea Ijt

Condition: not inspected (used), Year of construction: 1976, machine/vehicle number: 1299, Brand: Weeke Model: PE 75 Year of manufacture: 1976 Motor: 7.5 kW, 50 Hz, 380V, 3-phase Cob Hlmaju Nwzco Iogt Stock number: 10316

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm Cgobsv Hn N Uj Hlma Iet - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Condition: excellent (used), Year of construction: 2011, BÜRKLE PAINT LINE Model year: 2011 Stock no.: 2002451BXM Consisting of: Disc conveyor 900 Roller coating machine e.a. sy-Coater RCLD 1300 Distribution/scraping brush machine VBM 1300 Cleaning machine RMB 1300 Disc conveyor 900 Central cabinet, Control panel with touch screen Technical data: Software Easy line, touch screen TP177 Micro Working width = 900/1300 mm, working side right Feed speed 5–25 m/min Distance between machines approx. 25 mm Power: 400 volts, 50 hz, 3 phases, rated power 10kw, rated current 23 AMP, fuse 35 AMP Electrical cabinet 1600x500x2200mm Operating side right Pneumatics Air pressure 6 bar P1 | G 1/4 | 50 NL/min P2 | G 1/4 | 10 NL/min Extraction per connection point At air speed approx. 24 m/sec. 140 mm | 1100 m³/h Roller application machine Bürkle RCLD09M Rubber application roller above/below Chrome-plated dosing roller above/below Working width 1300mm Cgeb Hov I Ur Solma Iet Workpiece length min. 400mm Workpiece height 3-80mm Brushing machine VBM For:Scraping/brushing/polishing of liquid wood stains, (solvent or water-based stain) or for polishing UV waxes Working width Workpiece length min. 350mm Workpiece height 110mm Cleaning machine RMB For cleaning brushes 1 or 2 with cleaning agent (water or solvent) and drying them.

Year of construction: 2012, Condition: ready for operation (used), Machine no: 483 Year of manufacture: 2012 Technical data Belt length: 3900 mm Belt width: 1350 mm Total width: 1900 mm Cob Hlmjv Rpxfea Isgt Max weight on belt: 400 kg Motor: 0.37 kW, 50 Hz, 380 V, 3-phase Stock number: 2002452BXA

Condition: ready for operation (used), Brand: Bacci Model: Brevettata The outer spindles are adjustable in degrees and in height Work table size: 700x200 mm Maximum working height: 165 mm Power: 380V, 50 Hz, 3-phase Size for transport: Length: 185 cm Width: 120 cm Csb Hljh S Irvsma Iogt Height: 165 cm Weight: 950 kg Stock no: 103618BXA

Year of construction: 2022, Condition: new, Spray booth Model:Coral Type:Technodray 2,5 NB Year:2022 Strong construction built in galvanized panels. Standardincluded ventilator with spark proof impeller filter and lamp IP65 NA = standard execution NB = Extended walls and roof Techn info: Ventilator motor 2,2 Kw Working hight 1970 mm Working depth 1330mm Power:400 volt, 50 Hz 3 phase Total dimension: Hight: approx. 2100mm Lenght 2570mm Depth:2375mm Dimension for transport approx. 2600x1400x2200mm (lxwxh) Weight approx.700Kg Cgebjikq Rlj Hlma Iet For waterbased color (not atex) Options: Rotating table Paper filter 60x48mm in cardboard frame Elektric cabinet for start/stop ventilator Stock no: 2000996 OBS!Some pictures shown can be with options not included as standard

Condition: ready for operation (used), Year of construction: 2001, CNC twin table ERGON CNC Maskin SCM Type:Ergon Serie no:AA1/012348 Year:2001 CNC machine SCM ERGON Program NUM PC, and CAD ALIPA CAM 2 work tables simultaneoulsy or single work 2 tool magazin/too lchange each 12 holders 2 electro spindles each 11 kw, 18000rpm who can work in pair (DUOSET) independence Z axe stroke Tool holder HSK-63 1 drillbox 18 spindles Toolchange magazin 2x12 places Angular head Manual/instruction, pneumatic, electric diagram in severaL languages on CD Technical info: Control, program NUM-PC, CAD Alpha CAM Axis stroke X-Y-Z 4500-1740x-300mm Work tables 2 pcs each 2160x1520mm electyro spindles/routers DUOSET 2x11kw, 18000rpmwho can work in pair Vertical stroke of 2 independent Z axis Syncron electronic floating head 2 carousel toolholders for change each 12 pcs HSK 63 cone Vector axe Vacuumpump 90m3/h F18-drillbox 18 spindles Power 400 volt, 50 Hz, 3 phase Dimension set up approx:7460x5500mm X-x Weight 7000 kg Stock no:2001650BXA Price: 200000 SEK Cgob Hlmon Hx Tlsa Iet

Year of construction: 2008, Condition: good (used), Model:Easy 2000D Serie n0:08216/02 År:2008 Spraying automat Cefla model D for applying paint to boards and other flat workpieces. The machine with dry filter has 2 holders for spray guns. "Back spray" also enables the application of color on edges. The endless band allows for leftover color to be recycled. The main parts of the machine: Equipment for air ventilation Air cleaning system System for supply and distribution of paint Drive systems for guns Endless conveyor belt Cgjb Hljpz H Tdjma Ist Electronic control system Easy sprayer provides: High quality of painted objects, paint that does not hit the workpiece is recycled High production speed High utilization rate of color Techn info Easy 2000/D Control system ED-EASY2000 w/d Max work width including the edges 1300mm Max workpice thickness 70mm Air flow inlet ventilator/fan10000m3/h, 3 kw Air flow outlet ventilator/fan 2000m3/h, motor 7,5kw Feeding carpet speed 1,6-10,6m/min Airpressure holder endless belt  3bar Airpressure consumption 50Nl/min Airpressure feeding pump 6 bar Airpressure spray guns 1-4bar Holder spraygun Motor for operation of spray guns 2 kw Speed spray gun 120m/min Power:400 volt, 50 Hz, 3 phase, totalt17,1 kw, 40 A Maximun engine power 7,5 kw, 15,6 A Totalt17,1 kw Dimension:4840x3708x2900mm (lxwxh) Stock no:2001807BXM Note:In reservation for wrong technical info presented

Condition: ready for operation (used), Brand: Randek Type: SP700 Cjb Hlsrtp Htoma Ijgt Machines and equipment included: Powered roller conveyor Size: 4650x1460 mm Hydraulic lifting table Size: 3470x1470 mm Feed roller conveyor to the saw Size: 4000x400 mm Cutting saw Randek Size: 1000x1700x2100 mm Out-feeder roller conveyor with length stops Size: 5600x400 mm Hydraulic press Size: 1350x1500 mm Jacking cutter Randek Size: 1000x1500 mm Length of the entire saw line approx.: 17.5 meters P.s The cut-off saw's program and motor control of the saw blade do not work. Stock no: 2002038BXM

Condition: ready for operation (used), Brand: SCM Model: P-230-S Feeder: Mahros Type: Ben200 8 spindle planer SCM with feeder Mahros, safety curtain and spare parts. Tech. info: Capacity: Max working width 230mm Cgjb Hlmjtpm S Esa Iet Max working height 120mm Spindles in order: below (4 kW, 5.5 hp), right (5.5 kW, 7.5 hp), left (7.5 kW, 10 hp), right (5.5 kW, 7.5 hp), above (7.5 kW, 10 hp), left (5.5 kW, 7.5 hp), above (7.5 kW, 10 hp), below (7.5 kW, 10 hp) Spindle diameter 40mm Max. diameter of tools that can be mounted under the work table: 190 mm Variable feed speed 10-50m/min Cardan driven with pneumatic pressure on feed wheel Feed motor power: 4.4/5.5 kW Motor power for raising/lowering: 0.55 kW (0.75 hp) Brake in the engines Elecricity: 400 volts, 3 phase, 50 Hz Machine dimensions: Length: 5900 mm Width: 1800 mm Height: 1600 mm Size for transport: 590x210x160 cm Stock no: 2002064BXA

Condition: ready for operation (used), Year of construction: 1995, Brand: IST Type: 4 lamp Year: 1995 techn info: Through feed width 1600 mm Cjb Hsvxitlelma Iogt Lamps efficiency 100 W/cm (14 kW/ lamp) Power: 400 V, 50 Hz Stearing power: 230 V, 50 Hz Energy consumption: 145 A UV oven dimensions: 5000x2540 mm (lxw) Electric cabinet dimension: 1600x600x2000 mm (lxwxh) Stock no: 2000361BXA

Condition: ready for operation (used), Year of construction: 1987, Märke: Bacci Model: MOA Machine no: 1844 Year of manufacture: 1987 Stock no: 2002478 Cebsv T Tp Ts Hlma Iogt

Condition: ready for operation (used), Year of construction: 1963, Brand: Gustav Josting Model: PFS 2100 Year of manufacture: 1963 Csbsmb U A Ij Hlma Ijgt Technology data: Cutting length: 2100 mm Extra knife included Transport dimensions: 315x150x160 cm Weight: approx. 2000 kg Stock no: 2001659BXM